WELCOME MAINTENANCE TO A TO D SECTOR OFFICERS MD QUARTERS, ATT AND CERTAIN MISC BR WORKS AT DOLPHIN HILL UNDER GE (NB) VISAKHAPATNAM

Amount

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by "Vacuum based sandng machlne" and applying one or more coats of wall care putty to a smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer by "Auto Roller" complete all as specified and directed. (Note: Multipurpose mixer shall be used for uniform and proper mixing of putty)

M & L for preparing old decorated surfaces of wall, etc including cornces by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of distemper oil emulsion by "Auto Roller" complete all as specified and directed.

M & L for preparing old decorated surfaces of walls, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed.

M & L for preparing old decorated surfaces of ceiling, etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed.

M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

M & L for preparing old plastered surfaces of walls by "Vacuum based sandng machlne" after complete removal of existing treatment and applying two coats of water proofing chemical Dr. Fixit New Coat EZEE over a coat of Dr.Fixit prime seal coat Mfd by Pidilite Industries or equivelant approved make and applying two coats of distemper-oil-emulsion over a coat of alkali resistant priming coat by "Auto Roller" machine over one or more coat of wall care putty complete all as specified and directed. (Note: Multipurpose mixer shall be used for uniform and proper mixing of putty)

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc by "Vacuum based sandng machlne" and applying two coats of distemper oil emulsion over a coat of alkali resistant primer by "Auto Roller" and over one or more coats of wall care putty to a smooth surface complete all as specified and directed. (Note: Multipurpose mixer shall be used for uniform and proper mixing of putty)

M & L for preparation new external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer by "Auto Roller" machine as per manufacturer's instruction complete all as specified and directed.

M & L for preparation old decorated external surfaces of wall, chajja, facia etc by and applying one coat of water based acrylic weather proof exterior emulsion (exterior wall finish) paint by "Auto Roller" machine complete all as specified and directed.

M & L for preparing old decorated surfaces of wall, etc including cornces by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of Plastic emulsion paint by "Aquto Roller" machine complete all as specified and directed.

M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Vitrified, designed, dark shade/double charged/ ultracharged coloured, tiles, 10 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Glazed, ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair 20 mm dia, PVC coated MS curtain rod with brass brackets of superior quality complete all as specified and directed.

S & F in repairs, magnetic catch with striking plate, 40mm size for cub board complete all as specified and directed.

S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished fixed with screws complete all as specified and directed.

S & F in repairs, 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs, plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repair 125 mm size, shower rose, brass chromium plated, swival type, complete all as specified and directed.

S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs brass spindle (heavy) suitable for bib taps/stop valve of 15mm bore all as per the existing specifications complete all as specified and directed.

S & F in repairs PVC syphonic kit (any type/any pattern) suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respectcomplete all as specified and directed.

S & F in repairs PVC syphonic kit suitable for 10 litre capacity low level flushing cistern of make CERA Cat No. 2244 T twin flush fittings and making the cistern functional in all respect complete all as specified and directed.

S & F in repairs, CP, wall mixer 3-in-1 system with provision for both telephone shower and over head shower complete with 115 mm long bend pipe, connecting legs and wall flange complete all as specified and directed. (Make : JAQUAR, Cat No . FLR-5281N or equivelant of make as per list of manufacturer's)

S & F in repairs, 15mm bore, Bib Cock (Straight Line Model) With Wall Flange complete all as specified and directed. (Make: Jaquar Cat No. FLR-5047N or equivelant of make as per list of manufacturer)

S & F in repairs, 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. FLR-5041N or equivelant of make as per list of manufacturer)

S & F in repair corner glass shelf assembly with chromium plated bracket guard and railing complete all as specified and directed. (Make: Jaquar Cat No. ACN-1173 or equivelant of approved make)

S & F in repair 15 mm bore, health faucet PTMT with wall hook and 1 m long tube with all accessories complete all as specified and directed. (Make: Prayag Cat No. 187 or equivelant as per the List of Manufacturer's)

S & F in repairs, Stainless steel, kitchen plate rack of size 24x30x10 inch as per existing design and specification as approved complete all as specified and directed. (Make: Prayag Cat No. P-330 or equivelant of make as per list of manufacturer's)

S & F in repairs, Stainless steel, kitchen plate rack of size 31x36x10 inch as per existing design and specification as approved complete all as specified and directed. (Make: Prayag Cat No. P-348 or equivelant of make as per list of manufacturer's)

M & L for Applying silicon sealeant on joints of wall, cill, jambs roof etc. with sufficient quantity for proper sealing of joints complete all as specified and directed.

S & F in repairs 20 mm dia, stainless steel, rod, heavy duty, 1.5 to 2mm thick fixed to cupboard/wall etc including stainless steel bracket of superior quality complete all as specified and directed.

S & F in repairs, 10 litre capacity, Vitreous China valveless, syphonic action type, flushing cistern, conventional twin flush type, low level, snow white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. (Make: CERA Cat No. S1061106 or equivelant of make as per list of manufacturer's)

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 2nd class hard wood, Plain fillets. square, rectangular or triangular in section, wrought, secured with nails or brads, cross sectional area n.exc 3 Sqcm complete all as specified and directed.

S & F 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter of cup-board shelf, etc complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 40mm width of flape when open complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished fixed with screws complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and directed.

M & L for Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Refixing shutters of any description exc 2 sqm each in the other opening complete as directed.

M & L for preparation of new wooden surfaces of any description, n.exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

ALLURI CONSTRUCTIONS

SREE VSM ENGINEERING

BHAVANA ENTERPRISES

M/s VENKATA JAHNAVI CONSTRUCTIONS