PAINTING TO CERTAIN LOCATIONS OF RUNWAY, TAXI TRACKS, ORPs, TRG HELIPAD, N AND S LOOP, PAVEMENTS LINK IN TECH AREA AT AF STATION PHALODI

Amount

M&L for preparation of existing painted/unpainted surfaces on Runway & PTT (painting lines, dashes, arrows, threshold, touchdown point, degination letters etc) of pavements with compressed air blower 50 to 90 PSI, coir, wire brushes to remove all loose dirt, dust, grease spots or any foreign materials etc, over 10 cm in width or girth and applying a coat of water based (water thinable) acrylic road marking paint (Black/white/golden yellow) as per Colour codes (Golden Yellow ISC 356, Traffic white RAL 9016, Pasteal Orange RAL 2003 & Graphite Black Ral 5004) the approved shade and pattern with black colour, border strips on either sides of other colours marking, complete all as specified and directed. Note :-(i) The Black strips on either side of other colour paint line, arrows letter, dashes shall be measured combined width wise for the purpose of calculating the area of painting. (ii) Rate quoted shall be deemed to be inclusive of supply and fixing of masking tape to protect pavement surface for spilled out of paint and removal & disposal of the same from MOD land. (iii) Site availability shall be as per User's /site requirement. (iv) Rate including from any aircraft coming and stoppage of work in a day.

M&L for preparation of existing painted/unpainted surfaces ATC Dispersal, HU dispersal, all links, loops & ORA (painting lines, dashes, arrows, letters etc) of pavements with compressed air blower 50 to 90 PSI, coir, wire brushes to remove all loose dirt, dust, grease spots or any foreign materials etc, over 10 cm in width or girth and applying a coat of water based (water thinable) acrylic road marking paint (Black/white/yellow/golden yellow/orange etc) as per the (Colour codes Golden Yellow ISC 356, Traffic white RAL 9016, Pasteal Orange RAL 2003 & Graphite Black Ral 5004) approved shade and pattern in golden yellow line 150mm with 25 mm side black border strips on either sides of other colours marking, complete all as specified and directed. Note :-(i) The Black strips on either side of other colour paint line, arrows letter, dashes shall be measured combined width wise for the purpose of calculating the area of painting. (ii) Rate quoted shall be deemed to be inclusive of supply and fixing of masking tape to protect pavement surface for spilled out of paint and removal & disposal of the same from MOD land. (iii) Site availability shall be as per User's /site requirement. (iv) Rate including from any aircraft coming and stoppage of work in a day.

M&L for preparation of existing treated/untreated surfaces of pavement with wire, coir brushes compressed air blower to remove all loose dust, dirt , grease spots etc and applying a one coat of white wash, complete all as specified and as directed by Engineer -in -Charge.

Dismantling of interlocking tiles of any description, any thicknesscomplete all as specified and as directed

M&L for 100mm thick machine pressed precast interlocking paving blocks factory casted using grey cement and pigment, casted in an automatic plant working on vibration and simultaneous hydraulic compression from top, confirming to IS-15658-2006 and of shape haxagon/ triangular/ zigzag/ I-shaped etc. as directed having compressive strength not less than 400 Kg/ Sqcm (M-50 Grade) etc complete all as specified and directed.

Ditto as per Srl item No 5.00 (here-in-above) but except interlocking paving blocks i.e. using old interlocking paving blocks obtained from dismantling under serial item No. 04.00 (here-in-before) complete all as specified and directed.

Demolition concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of rocks/debris to a distance not exc 50 mts and depositing where directed at a level n exc. 1.5 m above the starting point. complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D2 40mm stone aggregates as in sub base all as specified and directed.

M&L for Sand filling under floors 25 to 30mm thick layer of sand cushioning including filling the interstices complete all as specified and directed.

M&L for Filleting of sction in repairs exc 25 sq cm but not exc 50 sq cm, in any position and to any shape in cement mortar 1:4 including excavation and earth work and all mitres, stops, etc.

SUBASH MAHAJAN

Ankit Jindal And Company

KRISHNA CONSTRUCTION COMPANY