REPAIR/ MAINT AND PAINTING OF STEEL FURNITURE INCLUDING REPAIR OF CHARPOY GI PIPE AT BINNAGURI MIL STN UNDER GE (SOUTH) BINNAGURI

Amount

Almirah Large Steel FD-67(M)/FD-1031 (a) M & L for taking out loose leg (right/left) and re-fixing the same in existing position with necessary run welding of Almirah large complete all as specified and as directed.(Note :- Thickness of metal to be welded shall not exceed 2 mm).

(b) Taking out and removing the old damaged bottom leg (right/left) and S & F new bottom leg made out of 20 gauge plain mild steel sheet (MS Sheet), made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine complete all as specified and as directed.

(c) Taking out loose shelf from Almirah large steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified and as directed.

(d) M & L for run welding in repairs to broken/damaged sides (left/right), back & top of almirah steel large complete all as specified and as directed (Note :- Thickness of materials to be welded not exceeding 2 mm in thickness and length of each welding exceeding 9 mm but not exceeding 20 mm in length.)

(e) Repair of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing etc required for smooth function complete all as specified and as directed.

(f) Taking out and removing existing unserviceable damaged lock from almirah (Large steel) and S & F new 6 lever steel lock as per existing shape and size with Keys in duplicate complete all as specified and as directed (Make :- HARRISON/LINK/GODREJ).

(g) Taking out old and removing old unserviceable handle from Almirah steel large and S & F steel chromium plated handle 125mm long of existing shape and size complete all as specified and as directed and shown on drg.(Make :- Mowjee or Equivalent as approved).

(h) Taking out and removing of old broken/damaged steel door shutter with necessary cutting in square/rectangle in shape and S & F the same dhutter as per existing size and shape not exceeding 100 sq cm each made out of 20 Gauge plain mild sheet (MS Sheet) fixed by run welding of required length including applying applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified and as directed.

(j) Taking out old unserviceable/damaged bottom shelf from its position and S & F new bottom shelf as per existing shape and size made out of 20 Gauge Plain mild sheet (MS Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and as directed and shown on drawing.

(k) Taking out old unserviceable/damaged intermediate shelf from its position and S & F new intermediate shelf as per existing shape and size made out of 20 Gauge Plain mild steel sheet (MS Sheet)by providing new hinges and make it smooth functional including applying painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and as directed and shown on drawing.

(l) Taking out and removing of old broken/damaged steel of door shutter (left/right) from almirah large steel and S&F new door shutters as per shape and size made out of 20 Gauge plain mild sheet (MS Sheet)by providing new hinges and make it smooth functional including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified and as directed and as shown on drawing.

(m) M & L for painting to Almirah Steel large by spraying on both side (outer/inner surface) including legs, door shutter and shelves with applying one coat of OG synthetic enamel paint (1st grade quality) by spray machine including preparation of old painted surfaces including applying ready made putty wherever required for making good cavities complete all as specified and as directed.

Almirah Medium Steel FD-67(M)/FD-1032 (a) M & L for taking out loose leg (right/left) from its position and re-fixing the same in existing position with necessary run welding of Almirah medium steel complete all as specified and as directed.(Note :- Thickness of metal to be welded shall not exceed 2 mm).

(b) Taking out and removing the old damaged bottom leg (right/left) from its position and S & F new bottom leg made out of 20 gauge plain mild steel sheet (MS Sheet), made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer complete all as specified and as directed.

(c) Taking out loose shelf from Almirah medium steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified and as directed.

(d) M & L for run welding in repairs to broken/damaged sides (left/right), back & top of almirah medium steel complete all as specified and as directed (Note :- Thickness of materials to be welded not exceeding 2 mm in thickness and length of each welding exceeding 9 mm but not exceeding 20 mm in length.)

(e) Repairing of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing etc required for smooth function complete all as specified and as directed.

(f) Taking out and removing existing unserviceable damaged lock from almirah medium steel and S & F new 6 lever steel lock as per existing shape and size with Keys in duplicate complete all as specified and as directed (Make :- HARRISON/LINK/GODREJ).

(g) Taking out and removing old unserviceable handle from Almirah medium steel and S & F steel chromium plated handle 125mm long of existing shape and size as approved complete all as specified and shown on drawing.

(h) Taking out and removing of old broken/damaged steel of door shutter with necessary cutting in square/rectangle in shape and S & F the same as per existing size and shape not exceeding 100 sq cm each made out of 20 Gauge plain mild steel sheet (MS Sheet) fixed by run welding of required length including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified and as directed.

(j) Taking out old unserviceable/damaged bottom shelf from its position and S & F new bottom shelf as per existing shape and size made out of 20 Gauge Plain mild steel sheet (MS Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and as directed and shown on drawing.

(k) Taking out old unserviceable/damaged intermediate shelf from its position and S & F new intermediate shelf as per existing shape and size made out of 20 Guage Plain mild steel sheet (MS Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with applying one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and as directed and shown on drawing.

(l) Taking out and removing of old broken/damaged steel of door shutter (left/right) from almirah medium steel and S&F new door shutters as per shape and size made out of 20 Gauge plain mild sheet (MS Sheet)by providing new hinges and make it smooth functional including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spraying all complete as specified and as directed and as shown on drawing.

(m) M & L for painting to Almirah Medium Steel by spray machine on both side (outer/inner surface) including legs, door shutter and shelves with one coat of OG synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty wherever required for making good cavities complete all as specified and as directed.

Chair CB Steel with Arm FD-75(M) (a) M & L for spot welding to damaged/broken steel frame of chair CB steel including arms complete all as specified and as shown on drawing. (Note :- Length of each spot welding 4cm in length and not exc. 2mm in thickness.)

(b) Taking out old damaged/broken flat iron support of chair CB steel with arms and S& F new mild steel flat iron of size 20x5mm, 75mm long to bottom of steel frame in support of wooden seat frame duly welded with making hole for fixing screw complete all as specified and shown on the drawing.

(c) Taking out old damaged/broken arm rest and S & F new arm rest in the same position as per existing shape and size made out of well seasoned first class hard wook 'TEAK WOOD' timber including applying two coat of black paint over wood filler on all exposed new wooden surfaces completed all as specified and as shown on drawing.

(d) TTaking out old damaged/broken arm rest and S & F new arm rest in the same position as per existing shape and size made out of well seasoned first class hard wook 'TEAK WOOD' timber with weaving slightly rounded on the edges and applying two coat of black paint over wood filler on all exposed new wooden sufaces of seat and black shall be painted with high glossy pait after preparation of new wooden surface including recanning with plastic cane to seat of chair cane bottom steel with arm with white colour half round(Godrej pattern with oval type 2mm wide o.4mm thick for weaving and 4mm wide for bordring and 04.mm thick gola type weighig not less than 6gms per 10 running meters complete all as specified & as directed and as shown on drawing.

(e) All as per ser No 28 (d) here in before but back frame complete all as specified.

(f) Taking out unserviceable top cap and S&F new plastic cap of best quality in the same position complete all as specified.

(g) M & L for applying painting to steel frmae of chair CB steel frame of chair CB Steel with arms with one coat of OG synthetic enambel paint(1st grade quality) after necessary preparation of old painted surfaces by spray machine over on coat of redoxide primer complete all as specified and shown on drg.

(h) Taking out and removing of old broken/damaged steel of door shutter with necessary cutting in square/rectangle in shape and S & F the same as per existing size and shape not exceeding 100 sq cm each made out of 20 Gauge plain mild steel sheet (MS Sheet) fixed by run welding of required length including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified and as directed.

Chair CB Steel w/out Arm FD-75(M) (a) M & L for spot welding to damaged/broken steel CB frame of chair with out arms complete all as specified and as shown on drawing. (Note :- Length of each spot welding 4cm in length and not exc. 2mm in thickness).

(b) Taking out old rusted/damaged/broken flat iron support of chair CB steel with out arms and S&F new mild steel flat iron of size 20 x 5mm, 75mm long to bottom of steel frame in support of wooden seat frame duly welded with necessary making hole for fixing screw complete all as specified and as shown on drawing.

(c) Taking out old damaged/broken seat frame and S & F new seat frame in the same position as per existing shape ande size made out of well seasoned first class hard wood ‘TEAK WOOD’ timber with making holes of weaving slightly rounded on the edges and applying two coat of black paint over wood filler on all exposed new wooden surfaces of seat and back shall be painted with high glossy paint after preparation of new wooden surface including recanning with plastic cane to seat of chair cane bottom steel with arm with white colour half round (Godrej pattern with oval type 2mm wide 0.4mm thick for weaving and 4mm wide for bordering and 4mm thick gola type weighing not less than 6 gms per 10 running meters complete all as specified and as shown on drawing.

(d) All as per item ser No 35(c) above but back frame complete all as specified.

(e) Taking out old unserviceable top cap aand S&F new plastic cap of best quality in the same position complete all as specified.

(f) M & L for applying painting to steel frame of chair CB steel without arms with two coat of OG synthetic enamel paint (1st grade quality) by spray machine to all steel of chair CB steel without arms frame including preparation of old painted surfaces over one coat of redoxide primer complete as specified and as shown on drawing.

(g) Taking out old unserviceable shoe & S&F new hard rubber shoe with screw as approved complete all as specified and as shown on drawing.

CHAIR VARANDAH FD-19(M)/FD-256 (a) M & L in repairs to broken steel frame not exc 2.5 cm in lengh by spot welding complete as specified and all as directed and as shown on drawing.(Note :- Material to be welded not to exceed 2.00mm in thickness)

(b) M&L for applying one coat of white synthetic enamel paint (1st grade quality) all exposed steal surface of chair verandah including preparation of old painted surface by spray machine complete all as specified and as directed.

(c) Taking out old existing damaged/ worn out unserviceable plastic cane/newar from seat and back of chair verandah and supply and fix the same seat and back with new white cane 4mm wide 1mm thick half round (oval type) mat pattern as per trade practice complete as specified and as shown in drawing. (Make of plastic cane AJOY/PREMIER/SHAH/ARYAN).

(d) Taking out old unserviceable shoes from leg of chair verandah and S&F new hard rubber shoes of best quality complete all as specified and as shown on drawing.

Chair Writing FD/E6/MAP/12 (a) Taking out old damaged / decayed tapestray cloth from seat and back and replace it with new tapestray cloth as per existing shape after approval of tapestray cloth complete all as directed. (Note : The cost of tapestray cloth should be min of Rs. 290/- per mtr).

(b) M&L for preparation of old painted steel surfaces of chair writing and applying one coat of black enamel paint (1st grade quality) on all exposed steel surfaces complete all as specified.

Chair Verandah FD/MAP-II/ 06 (a) M&L for spot welding in repairs not exc 2.50cm in length of broken steel frame complete all as specified and as shown in drawing.(Note : Material to be weled not to exceed 2.00mm in thickness)

(b) M&L for applying one coat of white synthetic enamel paint (Ist grade quality) on all exposed steel surface of chair verandah including preparation of old painted surface complete all as specified and as shown in drawing.

(c) Taking out old existing damaged / broken seat frame of chair verandah and Supply & fix the same with new seat frame complete all as specified and as shown in drawing. (Make of seat frame : AMKO).

(d) Taking out old existing damaged / broken back frame of chair verandah and Supply & fix the same with new back frame complete all as specified and as shown in drawing. (Make of back frame : AMKO).

Table Office Clerk Steel FD-84(M)/ FD-1004 (a) M & L for spot welding of broken steel frame and drawer of table office clerk steel complete all as directed. (Note :- Each spot shall not exc. 5cm in length and not exc. 2mm in thickness.)

(b) Taking out old unserviceable lock from drawer and S & F new 6 lever steel lock with keys in duplicate and and fixed in same position with smooth functioning complete all as specified. (Make :- GODREJ/LINK/HARRISON)

(c) Taking out old damaged/broken top from table office clerk steel and S & F new table Top in the same position as per existing shape and size made out of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 fixed with new screws including providing 4mm 1st class well seasoned teak wood beading all round complete all as specified and as shown on drawing. (Make : Kitply/Century/Green Ply/Archid).

(d) S & F new rubber shoes, best quality at the bottom of leg after taking out old damaged/unserviceable shoes from its existing position complete all as specified and as shown on drawing.

(e) M & L for preparation of old painted steel surfaces of table office clerk and applying one coat of olive green synthetic enamel paint (1st grade quality) on all exposed steel surfaces including drawer by spray machine after preparation of old painted steel surfaces complete all as specified and as shown on drawing.

Table Office Officer Steel FD-84(M)/ FD-1003 (a) M & L in repair to broken steel frame and drawer of table office offrs steel by spot welding complete all as specified and as directed.(Note :- Each spot shall not exc. 5cm in length and not exc. 2mm in thickness.)

(b) Taking out old unserviceable drawer locks from existing position and S & F new steel lock 6 liver with keys in duplicate and making the drawer functional complete all as specified. (Make - LINK/HARRISON/GODREJ)

(c) Taking out old unserviceable/damaged top from table office offrs steel and S & F new top of required shape and size made out of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 fixed with new screws including providing 4mm 1st class well seasoned teak wood beading all round complete all as specified and as shown on drawing. (Make : Kitply/Century/Green Ply/Archid)

(d) Taking out old unserviceable rubber shoes from the bottom of leg and S & F new rubber shoes of approved best quality in the existing position complete all as specified as shown on drawing.

(e) M & L for preparation of old painted steel surfaces of table office offrs and applying one coat of OG synthetic enamel paint (1st grade quality) on all exposed steel surfaces including drawerby spray machine complete all as specified and as shown on drawing.

Table 900 x 600 x 760mm Steel FD-1007 (a) Taking out old damaged/decayed table top and S & F new table top of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 fixed with new screws including providing 4mm 1st class well seasoned teak wood beading all round complete all as specified and as shown on drawing. (Make : Kitply/Century/Green Ply/Archid)

(b) M & L in repairs in length to broken/damaged steel frame of table not exceeding 2.5 cm lengh by spot weldidng complete all as specified and as directed. (Note :- Material to be welded n. exc. 2mm in thickness.)

(c) Taking out old unserviceable shoes and S & F new hard rubber shoes in legs complete all as specified and as shown on drawing.

(d) M & L for applying one coat of olive green synthetic enamel paint (1st grade quality) to all exposed steel surfaces of frame of table including preparation of old painted surfaces over one coat of redoxide primer by spray machine complete as specified and as shown on drg.

Table Dining OR FD-165(M) (a) Taking out old unserviceable/broken/damaged/decayed pre-laminated particle board and S & F new top of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 fixed with new screws including providing 4mm 1st class well seasoned teak wood beading all round complete all as specified and as shown on drawing. (Make : Kitply/Century/Green Ply/Archid).

(b) M & L repair to broken/ damaged steel frame of table dining ORs not exceeding 2.50 cm in length by spot welding complete all as specified and as directed. (Note :- Thickness of metal to be welded shall not exc 2mm.)

(c) Taking out old unserviceable, damaged shoe and S & F new hard rubber shoes in legs complete as specified and as directed.

(d) M & L for applying black synthetic enamel paint (1st grade quality) to all exposed steel surfaces of frame of table dining ORs including preparation of old painted surface one coat of redoxide primer by spray machine complete as specified and as shown on drg.

Teapoy Verandah FD-35(M)/ FD-255 (a) Taking out olddamaged/decayed top and S&F new top in the same position as per existing shape and size made with 18/19mm thick plywood BWR grade with 1mm thick decorative laminate type-1 fix with 4mm 1st class well seasoned teak wood beading all round all as including polishing with french polish high glossy finish complete all as specified, directed and shown on drawing. (Make :- Green Ply/Century/Kit Ply/Archid).

(b) M&L for repair to broken frame leg of teapoy verandah by spot welding not exc 2.50cm in length complete all as specified and as directed. (Note : Materials to be welded not exc. 2.50 cm in thickness).

(c) M&L for painting to steel leg frame applying one coat of white synthetic enamel paint (1st grade quality) including preparation of old surfaces by spray machine all as specified and as directed.

(d) Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified and directed.

Locker Bed Side Steel FD-257/FD-1029 (a) M & L in repair to broken/damaged bottom leg of locker bed side steel by spot welding complete as specified and as directed. (Note : Thickness of metal to be welded shall not exceed 2mm.)

(b) Removing the old damaged bottom leg (Right/Left) and S & F new bottom leg made out of 20 gauge plain mild steel sheet (MS sheet) fixed in the same position by spot welding including painting with applying one coat of olive green synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine complete after preparation of new steel surfaces all as specified , directed and as shown in drg.

(c) Taking out loose shelf from of locker Bed Side Steel and refixing the same position rigidly after minor repairs by providing new clips, nut and bolts as required complete all as directed.

(d) Taking out existing unserviceable hasp and stapple and S & F new hasp and staple of 100mm long chromium mild steel to front shutter of approved make and design complete all as specified and as shown on drg (Make :- Mowjee or Equivalent as approved).

(e) Repairing of existing unserviceable hinges by spot welding and make it functional by providing pin/greasing etc. complete all as directed. (Note :- Each spot welding shall not be more than 2.5cm in length and materials to be welded not exceeding 3mm in thickness).

(f) Removing of old handles from the front of shutter and S & F new 115mm long chrome plated handle of approved make and design complete all specified and as shown on drawing.

(g) Taking out of old unserviceable broken curtain rod and S & F new curtain rod of aluminium 19/20mm dia with steel brackets both sides in the same position by spot welding including painting with applying one coat of OG synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine over steel brackets after preparation of new steel surfaces complete all as specified and as shown on drawing (Make :- Mowjee or Equivalent as approved).

(h) Taking out old unserviceable/damaged bottom shelf and S & F new bottom shelf as per existing shape and size made out of 20 gauge plain mild steel sheet (MS sheet) and fixed in the same position with shelf clips, nuts & bolts etc including applying painting with one coat of Olive green synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine before fixing and after preparation of new steel surfaces complete all as specified and shown on drawing.

(j) Taking out old unserviceable/damaged intermediate shelf and S&F new intermediate shelf as per existing size and shape made out of 20 gauge plain mild steel sheet ( MS Sheet) and fixed in the same position with shelf clips, nuts and bolts etc including painting with one coat of olive green synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine before fixing after preparation of new steel surfaces complete all as specified and as directed and as shown in drawing.

(k) Taking out old unserviceable/damaged inside partition of locker bed side steel and S&F new partition made out of 20 gauge plain mild steel sheet (MS sheet) fixed in the same position as per existing shape and size by spot welding including painting with one coat of olive green synthetic enamel paint over a coat of red oxide primer by spraying after preparation of new steel surfaces complete all as specified and as directed and as shown in drawing.

(l) Taking out old unserviceable/damaged door shutter (Left/Right) from its position and S & F new door shutter as per existing shape and size made out of 20 gauge plain mild steel sheet (MS sheet) by providing new hinges and make it smooth functional including painting with one coat of OG synthetic enamel paint over a coat of red oxide primer by spraying after preparation of new steel surfaces complete all as specified and as directed and shown on drawing.

(m) M & L for applying painting to locker bed side steel by spray machine on both side (outer and inner surfaces) including legs, door shutters, partition and shelves with one coat of OG synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty wherever required to fill up the cavities complete all as specified and as directed and shown on drawing.

Rack Shoe Steel FD/E6/MAP/02(R) (a) M&L for spot welding in repairs not exc 2.50cm in length of broken structure complete all as specified and as shown in drawing. (Note : Material to be welded not to exceed 2.00mm in thickness)

(b) M&L for applying one coat of Black synthetic enamel paint (Ist grade quality) on all exposed steel surface of Rack shoe steel including preparation of old painted surface complete all as specified.

Charpoy IP with Hard Top FD/MAP-II/ 01 (a) Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick BWR, ISI marked, conforming to IS: 303-1989 (size 1950 mm x 900 mm) shall be fixed through screw with MS cleat & stiffener with cup and washer all as specified and as directed. (Make of ply : Green ply/Kit ply/Century/Bhutan Board).

(b) Taking out old damaged / broken stiffener from its position and refixing the same with new stiffener of size 25mm x 25mm x 16 guage MS tube shall be fixed through spot welding all as specified and as directed. (Note : Thickness of metal to be welded shall not exceed 2mm.)

(c) S&F new rubber shoes of best quality to the bottom of leg after taking out old damaged / unserviceable shoe from its existing position complete all as specified and as shown on drawing.

(d) M&L for one coat of Black synthetic enamel paint (1st grade quality) on all exposed steel surface of Charpoy hard top complete all as specified and directed.

Charpoy GI Pipe Ply Top FD-220 ((a) Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick BWR, ISI marked, conforming to IS: 303-1989 (size 1950 mm x 900 mm) shall be fixed through screw with MS cleat & S&F stiffners made out of flat iron 40 X 5mm x 900 mm long (each) shall be fixed with GI nuts, bolts, washers of appropriate size as directed between the long rails all as specified and as directed. (Make of ply : Green ply/Kit ply/Century/Bhutan Board).

(b) S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Charpoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge.

(c) Making short rail for GI Charpoy obtained from item No. 90(a) above here-in-before cut in to length and threading including removing of existing unserviceable short rails all as specified and directed.

(d) Making leg for GI charpoy from short rail obtained from item No. 91(b) above here-in-before end threading other end provided with plate welded at bottom and fixed in repairs as required as per drg.

(e) Removing existing old unserviceable elbow and check nut each from charpoy GI pipe and supply & fix new GI elbow and chuck nut each to charpoy GI pipe complete all as specified and directed. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

L. B. SHARMA

CENTRAL ENGINEERING WORKS

samrat saw mill and joinery workshop