REPAIR MAINT OF INTERNAL ELECTRIC SUPPLY INCLUDING FITTINGS AND FIXTURES, MCB DISTRIBUTION BOARD, REPAIR MAINT OF CEILING FANS, EXHAUST FANS AND CONNECTED WORKS AT SMA RAMESWARAM,DAD AND PAMPA VIHAR UNDER GE FORT KOCHI.

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including PVC casing & caping of 20mm or higher complete with all accessories fixed to wall / ceiling and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp.

All as per srl item No 02 here-in-before but one bell point controlled by one bell push, 06 Amps, single pole, one way.

All as per srl item No 02 here-in-before but one light point controlled by single pole two 2 wayswitch

All as per srl item No 02 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 02 here-in-before but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per Serial Item No 02 here-in-before but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

Material and labour for point wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories,fixing surface on wall/ceiling and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp.

All as per srl item No 08 here-in-before but one bell point controlled by one bell push, 06 Amps, single pole, one way.

All as per srl item No 08 here-in-before but one light point controlled by single pole two 2 wayswitch

All as per srl item No 08 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 08 here-in-before but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per Serial Item No 08 here-in-before but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix in repair switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix switch piano flush type, 06 Amp, single pole, two way, 230 Volt complete all as specified & directed.

Supply and fix in repair switch piano flush type , 06 Amp, single pole, two way, 230 Volt complete all as specified & directed.

Supply and fix bell push flush, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix in repair bell push flush, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix switch socket combination outlet 2 in 1, 5 pin, 06 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix in repair switch socket combination outlet 2 in 1, 5 pin, 06 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix in repair socket outlet 2 in 1, 5 pin, 06 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix in repair switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

Supply and fix in repair ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

Supply and fix in repair modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed.

Supply and fix in repair modular bell push with indicator, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed.

Supply and fix in repair modular switch with indicator, 16 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed.

Supply and fix in repair modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed.

Supply and fix in repair modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed.

Supply and fix in repair modular ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 120 watts, duly ISI marked complete all as specified & directed.

Supply and fix ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 01 module, humfree, AC, 230 volts, 100 watts marked complete all as specified & directed.

Supply and fix in repair ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 01 module, humfree, AC, 230 volts, 100 watts marked complete all as specified & directed.

Supply and fix ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts marked complete all as specified & directed.

Supply and fix in repair ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts marked complete all as specified & directed.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

Supply and fix in repair lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

Supply and fix decorative wall mounting type LED light fitting,1 x 9 / 10 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9 / 10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed. Make : Havells, Cat No. LHFOF1TZ1W012 or Crompton/Philips.

Supply and fix decorative wall mounting type LED light fitting,1 x 9 / 10 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9 / 10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed. Make : Havells, Cat No. LHFOF1TZ1W012 or Crompton/Philips.

Supply and fix surface mounted round LED downlight 06 Watt, comprises of aluminium housing, PC diffuser, electronic driver, 3KV surge voltage protector etc complete all as directed. Make : Lucker, Cat No : LNPSRR06 or equivalent in Crompton / Philips.

Supply and fix in repair surface mounted round LED downlight 06 Watt, comprises of aluminium housing, PC diffuser, electronic driver, 3KV surge voltage protector etc complete all as directed. Make : Lucker, Cat No : LNPSRR06 or equivalent in Crompton / Philips.

Supply and fix integrated LED bulk head fitting 10 Watt, with IP 66 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as directed. Make : Havells, Cat No : HEXAFT10WLED 857SSYM BOPC or equivalent in Crompton / Philips.

Supply and fix in repair integrated LED bulk head fitting 10 Watt, with IP 66 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as directed. Make : Havells, Cat No : HEXAFT10WLED857SSYM BOPC or equivalent in Crompton / Philips.

Supply and fix surface mounted LED tube light fitting four feet long, 20 Watt, with IP 20 protection comprises of polycarbonate extruded channel, , integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat No : LCTLN 20 CDL or Philips / Havells.

Supply and fix in repair surface mounted LED tube light fitting 20 Watt, with IP 20 protection comprises of polycarbonate extruded channel, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat No : LCTLN 20 CDL or Philips / Havells.

Supply and fix surface mounted LED tube light fitting two feet long, 10 Watt, with IP 20 protection comprises of polycarbonate extruded channel, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat No :LCTLN 10 CDL or Philips / Havells.

Supply and fix in repair surface mounted LED tube light fitting two feet long, 10 Watt, with IP 20 protection comprises of polycarbonate extruded channel, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat No :LCTLN 10 CDL or Philips / Havells.

Supply and fix in repair recessed mounted 2'x2' LED ceiling light fitting with an inbuilt sensor, 36 Watt, with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat No : LCTLRNE 36 FO CDL or equivalent in Philips/ Havells.

Supply and fix in repair surface mounted LED tube light fitting four feet long, 20 Watt, with IP 20 protection comprises of aluminium extruded channel,polycarbonate diffuser , integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat No : LDL 20 CDL or Philips / Havells.

Supply and fix in repair surface mounted LED tube light fitting two feet long, 10 Watt, with IP 20 protection comprises of aluminium extruded channel, extruded polycarbonate diffuser, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat No :LDL 10 CDL or Philips / Havells.

Supply and fix in repair single side connection LED T8 tube rod 18 Watt, of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as directed. Make : Havells, Cat No : PHOTONULTRAE201213T8SSTL18WLED865SPC or equivalent in Philips / Crompton.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories ,fixing surface on wall/ceiling and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

All as per serial item No 55 here-in-before but 06 Sq mm cable with 04 Sq mm earth wire.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including PVC casing & caping of 25mm or higher complete with and including all PVC casing & caping accessories and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

All as per serial item No 57 here-in-before but 06 Sq mm cable with 06 Sq mm earth wire.

Supply and fix in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make: - Legrand, Cat No. 5078 11 & 4085 93 or equivalent in Hager, Cat No : VYA120C & NCN120N or Schneider, Cat No : A9HMS220 & A9N1P20C.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make :- Legrand, Cat No. 5076 11 & 5079 13 or equivalent in Hager, Cat No : VYS08D & VYS08E or Schneider, Cat No : A9HSND08 & A9HSND08WB.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make :- Legrand, Cat No. 5076 12 & 5079 15 or equivalent in Hager, Cat No : VYS12D & VYS12E or Schneider, Cat No : A9HSND12 & A9HSND12WB.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C.

Supply and fix in replacement of MCB,Single pole & Neutral (SPN), AC, 240 volt of 63 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, Cat No. 4086 20 or equivalent in Hager, Cat No : NCN263N or Schneider, Cat No : A9N2P63C.

Supply and fix in replacement of MCB,Single pole & Neutral (SPN), AC, 240 volt of 16 -32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, Cat No.4086 14- 4086 17 or equivalent in Hager/Schneider.

Supply and fix in replacement of MCB, FP, AC, 415 volt of 63 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, Cat No. 4087 02 or equivalent in Hager / Schneider.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- Make :- Legrand, Cat No. 5077 50 & 5079 38 or equivalent in Hager, Cat No : VYV04PM & VYV00E or Schneider, Cat No : A9HVD04M & A9HVDXXWB. (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. Make :- Legrand, Model : DPX 160, Cat No. 4200 06 or equivalent in Hager, Cat No : HDA126Z or Schneider, Cat No : LV516312. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No. NCN106N to NCN132N or Schneider, Cat No. A9N1P06C to A9N1P32C.

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part I - 2009 and connected to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Taking down unserviceable ceiling fan / exhaust fan / wall mounted fan of any sweep after disconnecting the electric connections, dismantling of blades, transportation to work shop for repair / rewinding and back to the site after repair including reinstallation and testing complete all as directed.

Material and labour for rewinding of ceiling fan 1200 MM sweep by dismantling of fan motor, cutting and removing of burnt windings, cleaning the motor slots, rewinding the motor with supper enameled copper wire of appropriate gauge, provision of insulation paper, applying of varnish, heating / baking the motor to acheive the proper insulation resistance and reassembling of fan complete all as directed.

All as per serail Item No :69 here - in - before but ceiling fan 1400 MM sweep

All as per serial item No : 69 here - in - before but exhaust fan 300 MM sweep

All as per serial No : 69 here - in - before but exhaust fan 450 MM sweep

All as per serial item No : 69 here - in - before but wall mounted fan 400 MM sweep

Supply and fix in replacement ball bearing suitable for ceiling fan / exhaust fan complete all as directed. Make : SKF / NBC / NSK.

Supply and fix in replacement fan capacitor 2.5 Mfd complete all as directed. Make : Epcos / Tibcon / Usha.

Supply and fix in replacement fan capacitor 3.15 Mfd complete all as directed. Make : Epcos / Tibcon / Usha.

Supply and fix in replacement fan capacitor 4.0 Mfd complete all as directed. Make : Epcos / Tibcon / Usha.

Material and labour for painting of ceiling fan / exhaust fan with synthetic enamel paint by spray gun including filling cavities with filler, one coat after cleaning all dust etc complete all as directed.

Material and labour for cleaning, de-scaling and greasing of exhaust fan and louvers with necessary cleaning materials etc complete all as directed.

Supply and fix in replacement of MS louvers suitable for exhaust fan of size 300MM sweep complete all as directed.

Supply and fix in replacement of MS louvers suitable for exhaust fan of size 450MM sweep complete all as directed.

Supply and fix in replacement of blades suitable for exhaust fan of size 300MM sweep complete all as directed.

Supply and fix in replacement of blades suitable for exhaust fan of size 450MM sweep complete all as directed.

Supply and fix in replacement of PVC canopy ( set of two) suitable for ceiling fan of size 1200 / 1400 MM sweep complete all as directed

Supply and fix in replacement of heavy duty down rod four feet long suitable for ceiling fan of size 1200 / 1400 MM sweep complete all as directed

Supply and fix in replacement of heavy duty down fan hook as per sample suitable for ceiling fan of size 1200 / 1400 MM sweep complete all as directed

Supply and fix in replacement of shacle with rubbe bush heavy duty suitable for ceiling fan of size 1200 / 1400 MM sweep complete all as directed

Jyothis Enterprises

S. M. Enterprises

P N Enterprises

K R JOSEPH AND SONS

Jack Electrolinks Private Limited

S L ELECTRICAL WORKS