Construction of ACB Police Station (G + 1) at Botad, Dist. Botad. [Including Electrification]

Name of Work : Construction of ACB Police Station (G + 1) at Botad, Dist. Botad. [Including

Electrification]

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

1 Excavation for foundation upto 1.50mt. depth including sorting out 153.00 Cum 155.60 Rupees One Hundred Fifty Five

and stacking of useful materials and disposing of the excavated And Paise Sixty Only

stuff upto any lead & Lift. [B] Dense or Hard Soil.

2 Excavation for foundation upto 1.50mt. depth including sorting out 271.00 Cum 621.26 Rupees Six Hundred Twenty

and stacking of useful materials and disposing of the excavated One And Paise Twenty Six Only

stuff upto any lead & Lift. [E] hard Rock

3 Excavation for foundation upto 1.5 to 3.0 M. depth including sorting 123.00 Cum 644.81 Rupees Six Hundred Forty Four

out and stacking of useful materials and disposing of the excavated And Paise Eighty One Only

stuff of any lead & Lift. [E] hard Rock

4 Excavation for foundation upto 3.0 to 5.0 M. depth including sorting 41.00 Cum 668.36 Rupees Six Hundred Sixty Eight

out and stacking of useful materials and disposing of the excavated And Paise Thirty Six Only

stuff of any lead & Lift. [E] Hard Rock

5 Providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse 13.00 Cum 3767.61 Rupees Three Thousand Seven

sand : 4 graded stone aggregate 20mm nominal size) and curing Hundred Sixty Seven And Paise

complete including cost of form work in FOUNDATION AND Sixty One Only

6 Providing & laying Cement Concrete 1:3:6 ( 1 cement : 3 coarse 12.40 Cum 3064.60 Rupees Three Thousand Sixty

sand : 6 M/C graded stone aggrigates of 20 mm nominal size) Four And Paise Sixty Only

curing complete including cost of formwork in FOUNDATION AND

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

7 Providing and laying TMT Steel reinforcement (Grade Fe- 30477.00 Kg 77.30 Rupees Seventy Seven And

500/500D) for RCC work including cutting,bending,binding and Paise Thirty Only

placing in position etc.comp for all floor. Steel must be used as per

approved material list of Gsphcl.

8 Providing & laying controlled cement concrete M- 250 and finishing 44.00 Cum 4722.70 Rupees Four Thousand Seven

smooth with curing etc.complete including the cost of formwork of Hundred Twenty Two And Paise

plywood only with fair finish & Proping must be of steel only so as to Seventy Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Column Footing. Rate are also Inclusive Of Providing &

Mixing Plastisizer Of Approved Make & In Proportion As per mix

9 Providing & laying controlled cement concrete M- 250 and finishing 19.00 Cum 9363.24 Rupees Nine Thousand Three

smooth with curing etc.complete including the cost of formwork of Hundred Sixty Three And Paise

plywood only with fair finish & Proping must be of steel only so as to Twenty Four Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Column Up to Plinth for any cross sectional area at Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

10 Providing & laying controlled cement concrete M- 250 and 21.00 Cum 8114.92 Rupees Eight Thousand One

finishing smooth with curing etc.complete including the cost of Hundred Fourteen And Paise

formwork of plywood only with fair finish & Proping must be of steel Ninety Two Only

only so as to give a fair finish but excluding the cost of

reinforcement for R.C.C. work in Wall up to Plinth level for any

cross sectional area at Rate are also Inclusive Of Providing &

Mixing Plastisizer Of Approved Make & In Proportion As per mix

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

11 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 coarse 59.50 Cum 2742.27 Rupees Two Thousand Seven

sand : 8 M/C graded stone aggrigates of 20 mm nominal size) Hundred Forty Two And Paise

curing complete including cost of formwork in FOUNDATION AND Twenty Seven Only

12 Providing & laying controlled cement concrete M- 250 and finishing 26.00 Cum 7318.96 Rupees Seven Thousand Three

smooth with curing etc.complete including the cost of formwork of Hundred Eighteen And Paise

plywood only with fair finish & Proping must be of steel only so as to Ninety Six Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Plinth Beam for any cross sectional area at Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved Make & In

Proportion As per mix design.

13 Brick work using common burnt clay building bricks having 113.00 Cum 4172.60 Rupees Four Thousand One

crushing strength not less than 35 Kg/Sq.cm.in foundation and Hundred Seventy Two And

plinth in cement mortar 1:6 (1-cement;6-coarse sand), Paise Sixty Only

Conventional bricks. Bricks with frog only shall be used.

14 HALF BRICK masonary using in common brunt clay building 5.00 Sqm 623.60 Rupees Six Hundred Twenty

bricks having crusing strength not less than 35 kg./sq.cm.in cement Three And Paise Sixty Only

mortar 1:4 (1 cement : 4 coarse sand) conventional bricks for

Foundation and Plinth.

15 Honey comb masonary with using brick masonary in course in 5.00 Cum 2795.64 Rupees Two Thousand Seven

super structure with stone of approved quality in cement mortar 1:6 Hundred Ninety Five And Paise

(1:Cement; 6: couse sand) including curing etc. complete. Sixty Four Only

FOUNDATION AND PLINTH

16 Filling available excavated earth (excluding rock ) in trenches, 128.00 Cum 135.56 Rupees One Hundred Thirty

plinth sides of foundation etc. in layers not exceeding 20 cms. in Five And Paise Fifty Six Only

depth consolidation each deposited layer by ramming and watering.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

17 Filling in foundation and plinth with murrum or selected soil in 615.00 Cum 298.79 Rupees Two Hundred Ninety

layers of 20 cm. Thickness including watering, ramming and Eight And Paise Seventy Nine

consolidating etc. complete. Only

18 Supplying and Filling in plinth with sand under floors including 16.00 Cum 477.03 Rupees Four Hundred Seventy

watering, ramming, consolidation and dressing etc.complete. Seven And Paise Three Only

19 Applying general insecticide pest control treatment to floors, cup 158.00 Sqm 38.70 Rupees Thirty Eight And Paise

boards etc., including labour, material etc. complete. Seventy Only

20 Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 coarse 16.00 Cum 2581.11 Rupees Two Thousand Five

sand; 10 hand broken stone aggregate 40mm nominal size) and Hundred Eighty One And Paise

curing complete including cost of form work in foundation and Eleven Only

21 Providing & laying controlled cement concrete M- 250 and finishing 14.42 Cum 6173.41 Rupees Six Thousand One

smooth with curing etc.complete including the cost of formwork of Hundred Seventy Three And

plywood only with fair finish & Proping must be of steel only so as to Paise Forty One Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Coping for any cross sectional area at Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved Make & In

Proportion As per mix design.

22 Providing & laying controlled cement concrete M-150 and finishing 16.00 Cum 4129.08 Rupees Four Thousand One

smooth with curing etc.complete including the cost of formwork of Hundred Twenty Nine And Paise

plywood only with fair finish & Proping must be of steel only so as to Eight Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Grade slab for any cross sectional area at Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved Make & In

Proportion As per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

23 Providing & laying controlled cement concrete M- 200 and finishing 15.00 Cum 10783.57 Rupees Ten Thousand Seven

smooth with curing etc.complete including the cost of formwork of Hundred Eighty Three And Paise

plywood only with fair finish & Proping must be of steel only so as to Fifty Seven Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Column for any cross sectional area at Ground Floor

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

24 Providing & laying controlled cement concrete M- 200 and finishing 9.00 Cum 8441.06 Rupees Eight Thousand Four

smooth with curing etc.complete including the cost of formwork of Hundred Forty One And Paise

plywood only with fair finish & Proping must be of steel only so as to Six Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Stair Case For All Floors Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In Proportion As

per mix design.

25 Providing & laying controlled cement concrete M- 200 and finishing 15.00 Cum 9079.22 Rupees Nine Thousand Seventy

smooth with curing etc.complete including the cost of formwork of Nine And Paise Twenty Two

plywood only with fair finish & Proping must be of steel only so as to Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Beam. for any cross sectional area at Ground Floor Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

26 Providing & laying controlled cement concrete M- 250 and finishing 3.00 Cum 9115.42 Rupees Nine Thousand One

smooth with curing etc.complete including the cost of formwork of Hundred Fifteen And Paise Forty

plywood only with fair finish & Proping must be of steel only so as to Two Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Beam. for any cross sectional area at Ground Floor Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

27 Providing & laying controlled cement concrete M- 200 and finishing 26.00 Cum 8054.30 Rupees Eight Thousand Fifty

smooth with curing etc.complete including the cost of formwork of Four And Paise Thirty Only

plywood only with fair finish & Proping must be of steel only so as to

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in SLAB having thickness of 10 cm. and upto 13 cms. for

any cross sectional area at Ground Floor Rate are also Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In Proportion

As per mix design.

28 Providing & laying controlled cement concrete M- 200 and finishing 2.00 Cum 7627.60 Rupees Seven Thousand Six

smooth with curing etc.complete including the cost of formwork of Hundred Twenty Seven And

plywood only with fair finish & Proping must be of steel only so as to Paise Sixty Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in SLAB having thickness of 13 cm. and upto 15 cms. for

any cross sectional area at Ground Floor Rate are also Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In Proportion

As per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

29 Providing & laying controlled cement concrete M- 250 and finishing 10.50 Cum 7735.86 Rupees Seven Thousand Seven

smooth with curing etc.complete including the cost of formwork of Hundred Thirty Five And Paise

plywood only with fair finish & Proping must be of steel only so as to Eighty Six Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in SLAB having thickness of 13 cm. and upto 15 cms. for

any cross sectional area at Ground Floor Rate are also Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In Proportion

As per mix design.

30 Providing & laying controlled cement concrete M- 200 and finishing 15.00 Cum 10824.75 Rupees Ten Thousand Eight

smooth with curing etc.complete including the cost of formwork of Hundred Twenty Four And Paise

plywood only with fair finish & Proping must be of steel only so as to Seventy Five Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Columns for any cross sectional area at FIRST FLOOR

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

31 Providing & laying controlled cement concrete M- 200 and finishing 13.00 Cum 9120.40 Rupees Nine Thousand One

smooth with curing etc.complete including the cost of formwork of Hundred Twenty And Paise

plywood only with fair finish & Proping must be of steel only so as to Forty Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Beam. for any cross sectional area at First Floor Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

32 Providing & laying controlled cement concrete M- 200 and finishing 25.00 Cum 8095.48 Rupees Eight Thousand Ninety

smooth with curing etc.complete including the cost of formwork of Five And Paise Forty Eight Only

plywood only with fair finish & Proping must be of steel only so as to

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in SLAB having thickness of 10 cm. and upto 13 cms. for

any cross sectional area at First Floor Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In Proportion As

per mix design.

33 Providing & laying controlled cement concrete M-200 and finishing 4.00 Cum 7668.78 Rupees Seven Thousand Six

smooth with curing etc.complete including the cost of formwork of Hundred Sixty Eight And Paise

plywood only with fair finish & Proping must be of steel only so as to Seventy Eight Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in SLAB having thickness of 13cm and upto 15cm for any

cross sectional area at First Floor Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In Proportion As

per mix design.

34 Providing & laying controlled cement concrete M-200 and finishing 7.00 Cum 10865.93 Rupees Ten Thousand Eight

smooth with curing etc.complete including the cost of formwork of Hundred Sixty Five And Paise

plywood only with fair finish & Proping must be of steel only so as to Ninety Three Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Column for any cross sectional area at Second Floor

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

35 Providing & laying controlled cement concrete M-200 and finishing 2.00 Cum 9161.58 Rupees Nine Thousand One

smooth with curing etc.complete including the cost of formwork of Hundred Sixty One And Paise

plywood only with fair finish & Proping must be of steel only so as to Fifty Eight Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Beam. for any cross sectional area at Second Floor Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

36 Providing & laying controlled cement concrete M-200 and finishing 5.00 Cum 7709.96 Rupees Seven Thousand Seven

smooth with curing etc.complete including the cost of formwork of Hundred Nine And Paise Ninety

plywood only with fair finish & Proping must be of steel only so as to Six Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in SLAB having thickness of 13 cm. and upto 15 cms. for

any cross sectional area at Second Floor Rate are also Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In Proportion

As per mix design.

37 Providing and laying autoclaved aerated sand based cement 82.50 Cum 5990.42 Rupees Five Thousand Nine

concrete (AAC) masonry blocks confirming to IS 2185 (part-3) Hundred Ninety And Paise Forty

having compressive strength not less than 4.0 N/mm2 (heavy Two Only

strength) and joited with blockjointing adhesive mortar having

tensile strength of not less than 0.8n/mm2 and ensuring long lasting

thermal insulation according to european norms (EN 13501-2)

suitable for high performance of external & internal concrete

masonry walls, joint having thickness in thin layer of 3mm to 4mm

between masonry units. masonry blocks need not to pre-wet the

blocks or post cure the wall with water. for Ground Floor.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

38 Providing & laying controlled cement concrete M- 200 and finishing 10.00 Cum 6137.22 Rupees Six Thousand One

smooth with curing etc.complete including the cost of formwork of Hundred Thirty Seven And Paise

plywood only with fair finish & Proping must be of steel only so as to Twenty Two Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel Band for any cross sectional area at Ground Floor.

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

39 Providing & laying controlled cement concrete M-200 and finishing 3.50 Cum 8789.99 Rupees Eight Thousand Seven

smooth with curing etc.complete including the cost of formwork of Hundred Eighty Nine And Paise

plywood only with fair finish & Proping must be of steel only so as to Ninety Nine Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel for any cross sectional area at Ground Floor. Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

40 Providing & laying controlled cement concrete M-200 and finishing 5.00 Cum 9756.93 Rupees Nine Thousand Seven

smooth with curing etc.complete including the cost of formwork of Hundred Fifty Six And Paise

plywood only with fair finish & Proping must be of steel only so as to Ninety Three Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in finishing smooth for R.C.C. Chhajjas having any

thickness up to floor two level including finishing the exposed

surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a

smooth surface for ALL FLOOR. Rate are also Inclusive Of

Providing & Mixing Plastisizer Of Approved Make & In Proportion As

per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

41 Providing and laying autoclaved aerated sand based cement 69.00 Cum 6032.12 Rupees Six Thousand Thirty

concrete (AAC) masonry blocks confirming to IS 2185 (part-3) Two And Paise Twelve Only

having compressive strength not less than 4.0 N/mm2 (heavy

strength) and joited with blockjointing adhesive mortar having

tensile strength of not less than 0.8n/mm2 and ensuring long lasting

thermal insulation according to european norms (EN 13501-2)

suitable for high performance of external & internal concrete

masonry walls, joint having thickness in thin layer of 3mm to 4mm

between masonry units. masonry blocks need not to pre-wet the

blocks or post cure the wall with water. for First Floor.

42 Providing & laying controlled cement concrete M- 200 and finishing 9.00 Sqm 6219.58 Rupees Six Thousand Two

smooth with curing etc.complete including the cost of formwork of Hundred Nineteen And Paise

plywood only with fair finish & Proping must be of steel only so as to Fifty Eight Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel Band for any cross sectional area at First Floor.

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

43 Providing & laying controlled cement concrete M-200 and finishing 2.00 Cum 8831.17 Rupees Eight Thousand Eight

smooth with curing etc.complete including the cost of formwork of Hundred Thirty One And Paise

plywood only with fair finish & Proping must be of steel only so as to Seventeen Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel for any cross sectional area at First Floor. Rate are

also Inclusive Of Providing & Mixing Plastisizer Of Approved Make

& In Proportion As per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

44 Providing and laying autoclaved aerated sand based cement 34.00 Cum 6073.82 Rupees Six Thousand Seventy

concrete (AAC) masonry blocks confirming to IS 2185 (part-3) Three And Paise Eighty Two

having compressive strength not less than 4.0 N/mm2 (heavy Only

strength) and joited with blockjointing adhesive mortar having

tensile strength of not less than 0.8n/mm2 and ensuring long lasting

thermal insulation according to european norms (EN 13501-2)

suitable for high performance of external & internal concrete

masonry walls, joint having thickness in thin layer of 3mm to 4mm

between masonry units. masonry blocks need not to pre-wet the

blocks or post cure the wall with water. for Second Floor.

45 Providing & laying controlled cement concrete M- 200 and finishing 5.00 Sqm 6219.58 Rupees Six Thousand Two

smooth with curing etc.complete including the cost of formwork of Hundred Nineteen And Paise

plywood only with fair finish & Proping must be of steel only so as to Fifty Eight Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel Band for any cross sectional area at Second Floor.

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

46 Providing & laying controlled cement concrete M-200 and finishing 0.50 Cum 8872.35 Rupees Eight Thousand Eight

smooth with curing etc.complete including the cost of formwork of Hundred Seventy Two And

plywood only with fair finish & Proping must be of steel only so as to Paise Thirty Five Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel for any cross sectional area at Second Floor. Rate

are also Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

47 Providing, Supplying and Fixing of 32mm (Total) Thick Double 4.00 Sqm 11088.83 Rupees Eleven Thousand Eighty

Flush Door Shutter with 1mm Thick Laminates on Both Side of Eight And Paise Eighty Three

Shutter. Making / Construction of Flush Door is with Pine or Only

southern Yellow Pine Filler and 2.5mm core veneer Both Side and

0.4mm Face Veneer on Both Side with Lock rail on Center. Flush

Door Provide with Teak wood beading patti (32mm X 12mm) on

Peripheries of Flush Door with Door Frame of Non Teak Solid

Wood of size 150mm x 70mm with Chemically Treated and

Seasoned Including Paint Matching with Laminates. Frame & Flush

door shutter having 5 year warranty against attack of biological

agent like termite, borers, decay, fungi and harmful insects also

warranty against seasoning related issues like crack, bending,

twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc

coating shall be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc.

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No

of Hold Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges,

100mm x 75 mm x 3mm thick, required Screw & Nails per Frame

and Fixing following S.S. Fixtures And Fastening. (1) Aldrops 2 No,

250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double

Leg Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm

Long X 10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is

to be Obtained from Vanil Udhyog Maked Only.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

48 Providing, Supplying and Fixing of 32mm (Total) Thick Double 25.00 Sqm 8984.16 Rupees Eight Thousand Nine

Flush Door Shutter with 1mm Thick Laminates on Both Side of Hundred Eighty Four And Paise

Shutter. Making / Construction of Flush Door is with Pine or Sixteen Only

southern Yellow Pine Filler and 2.5mm core veneer Both Side and

0.4mm Face Veneer on Both Side with Lock rail on Center. Flush

Door Provide with Teak wood beading patti (32mm X 12mm) on

Peripheries of Flush Door with Door Frame of Non Teak Solid

Wood of size 120mm x 65mm with Chemically Treated and

Seasoned Including Paint Matching with Laminates. Frame & Flush

door shutter having 5 year warranty against attack of biological

agent like termite, borers, decay, fungi and harmful insects also

warranty against seasoning related issues like crack, bending,

twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc

coating shall be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc.

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No

of Hold Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges,

100mm x 75 mm x 3mm thick, required Screw & Nails per Frame

and Fixing following S.S. Fixtures And Fastening. (1) Aldrops 2 No,

250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double

Leg Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm

Long X 10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is

to be Obtained from Vanil Udhyog Maked Only.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

49 Providing, Supplying and Fixing of 32MM (Total) Thick Flush Door 8.00 Sqm 8407.55 Rupees Eight Thousand Four

Shutter with 1 mm Thick Laminates on Both Side of Shutter Hundred Seven And Paise Fifty

(Laminates Shall be Durain, Archid, Aica, Royal Crown, Royal Five Only

Touch Brand only) Making / Construction of Flush Door is with Pine

or Southern Yellow Pine Filler and 2.5mm Core Veneer Both Side

and 0.4mm Face Veneer on Both Side with Lock rail on Centre.

Flush Door Provide with Teak wood beading Patti (32mm X 12mm)

on Peripheries of Flush Door with Matching Laminate Paint with

Non Teak wood Door Frame of 100mm × 60mm Prepare by VANIL

UDHYOG Including Paint Matching with Laminates. Flush Door

Shutter having 05 Years Warranty against Attach of biological Agent

like Termite, Borers, Decay, Fungi, and harmful Insects also

Warranty against Seasoning Related Issues like Crack, Bending,

Twisting, Warping. Laminates On shutter shall be Press by Cold

Press Method. Door Frame Frame and Shutter Shall be brought to

Site in Packed PVC Bags & PVC Coating shall be removed on

Completion of Work in such a wasubmitted regularly to

G.S.P.H.C.L. & also get satisfactory cert

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No

of Hold Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges,

100mm x 75 mm x 3mm thick, required Screw & Nails per Frame

and Fixing following S.S. Fixtures And Fastening. (1) Aldrops 2 No,

250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double

Leg Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm

Long X 10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is

to be Obtained from Vanil Udhyog Maked Only.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

50 Providing and fixing Consealed Cock Heavy Duty stop cock with 7.00 No. 942.54 Rupees Nine Hundred Forty Two

Exposed part and other accessories 15mm Dia with all necessary And Paise Fifty Four Only

fittings Consealed Cock shall be as per approved make of GSPHCL

51 Providing and Fixing Granite of Telephonic Black Colour 15 to 99.00 Sqm 2428.00 Rupees Two Thousand Four

18mm thick for jambs and sills of doors & windows using neat Hundred Twenty Eight Only

cement slurry laid over 20 mm average base of cement mortar 1:1

(1 cement:1 Coarse Sand) and jointed with grey cement slurry

including racking (Tancha Work) rubbing and polishing,

scaffoldings, tools and tackles, scaffolding etc. complete. (with base

of neat cement) as per direction of Engineer in charge including

rounding the exposed edges as directed etc. Complete for ALL

52 Provinding and fixing chicken wire mesh Jali 0.18 mm and 0.18mt 321.00 Sqm 64.06 Rupees Sixty Four And Paise

wide with necessary screws and nails to joint between R.C.C. Six Only

column and brick work etc. complete as per Engineer-in-charge.

53 Providing 10mm. thick cement plaster in single coat on ceiling for 195.00 Sqm 220.13 Rupees Two Hundred Twenty

interior plastering and finished even and smooth in C:M 1:3 (1 And Paise Thirteen Only

cement; 3 sand) including finishing with a floating coat of neat

cement slurry at Ground Floor.

54 Providing 15 mm. thick cement plaster in single coat on wall for 565.00 Sqm 220.46 Rupees Two Hundred Twenty

interior plastering and finished even and smooth in C:M 1:4 (1 And Paise Forty Six Only

cement; 4 sand) including finishing with a floating coat of neat

cement slurry at Ground Floor.

55 Providing 10 mm thick cement PLASTER in single coat on ceilings 177.00 Sqm 246.61 Rupees Two Hundred Forty Six

for interior plastering and finished even & smooth in C.M. 1: 3 ( 1 And Paise Sixty One Only

cement : 3 sand ) including finishing with a floating coat of neat

cement slurry at First Floor.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

56 Provinding 15 mm thick cement PLASTER in single coat on brick 497.00 Sqm 248.93 Rupees Two Hundred Forty

or concrete wall for interior plastering and finished even and smooth Eight And Paise Ninety Three

in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating Only

coat of neat cement slurry at First Floor.

57 Providing 10 mm thick cement PLASTER in single coat on ceilings 26.00 Sqm 273.09 Rupees Two Hundred Seventy

for interior plastering and finished even & smooth in C.M. 1: 3 ( 1 Three And Paise Nine Only

cement : 3 sand ) including finishing with a floating coat of neat

cement slurry at Second Floor.

58 Provinding 15 mm thick cement PLASTER in single coat on brick 146.00 Sqm 277.40 Rupees Two Hundred Seventy

or concrete wall for interior plastering and finished even and smooth Seven And Paise Forty Only

in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating

coat of neat cement slurry at Second Floor.

59 Providing 20mm thick SAND FACED cement plaster on walls 621.00 Sqm 339.02 Rupees Three Hundred Thirty

above ground level consisting 12mm thick backing coat of C:M 1:3 Nine And Paise Two Only

(1 cement; 3 sand) and 8mm thick finishing coat of C:M 1:1 (1

cement; 1 sand) etc. complete for any height. [Gutka Plaster only]

60 Synthetic Texture: Plaster with Double Coat Smooth plaster : 645.00 Sqm 519.20 Rupees Five Hundred Nineteen

Providing 20mm thick cement plaster in single coat plastering upto And Paise Twenty Only

floor two level Outside and finished even and smooth in (i) Cement

mortar 1:3 (1-cement : 3-sand) as Base Coat and providing 2-3 mm

thick synthetic texture plaster of approved texture (Material Shall be

Used as Approved By GSPHCL Only) including cost of all materials,

labour, conveyance, loading and unloading, taxes, royalties,

scaffolding, watering etc.complete for any Height as per Drawing

and instructions of Engineer -in -Charge.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

61 Providing 10mm thick cement plaster in single coat of interior 197.50 Sqm 230.62 Rupees Two Hundred Thirty And

plastering and finished even and smooth in cement mortar 1:3 (1 Paise Sixty Two Only

cement; 3 sand) and finishing with a floating coat of neat cement

slurry including providing and mixing I.S.I. make water proofing

material in cement mortar in proportion recommended by the

manufacturer for All Floors.

62 Provinding CEMENT VATA (10cm x 10cm) size quarter round in 242.00 Rmt 24.04 Rupees Twenty Four And Paise

cement mortar (1 : 1) including neat cement finishing, watering etc. Four Only

63 Providing and laying acrylic base (zycosil) equvivalant water 43.00 Sqm 110.70 Rupees One Hundred Ten And

proofing paint in two coats to vertical and horizontal surface of Paise Seventy Only

depressed portion of bath and W.C. as directed by engineer -in-

charge. This treatement shall be carried out over and above water

proofing cement plaster

64 Providing and fixing Multi way U.PVC/SWR Nahni Trap of the 15.00 No. 580.47 Rupees Five Hundred Eighty

following nominal dia self cleaning design with top tile and strainer And Paise Forty Seven Only

including cost of cutting and making good the wall and floors

100mm inlet and 50mm outlet including 150mm x 150mm stainless

65 Provinding and filling CINDER including watering, consolidation 15.00 Cum 791.68 Rupees Seven Hundred Ninety

etc.. Complete. One And Paise Sixty Eight Only

66 Providing and laying ordinary cement concrete 1:2:4 (1 cement; 2 2.00 Sqm 335.72 Rupees Three Hundred Thirty

coarse sand; 4 graded stone aggregate 20mm nominal size ) laid in Five And Paise Seventy Two

one layer finished with a floating coat of neat cement (B) 50mm Only

thick IPS for ALL FLOORS.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

67 Provinding and laying inegrated cement based water proofing 186.50 Sqmt 890.36 Rupees Eight Hundred Ninety

treatment of required thickness over the roof including 10mm thick And Paise Thirty Six Only

waterproofing cement plaster in cement plaster in cement mortar1:3

and chaina mosaic fitting and finally finishing the surfase with white

cement slurry and slopping out taerrace slabs with following

specification laid to required slope not flatter than 1:80 ( the

thickness of water proofing treatment near rainwater outlet or the

lowest point of the finished slope shall not be less then 45mm,

including treating the vertical surfaseof the parapet wall up to 20cms

. height above finished level of terracing including finishing the top

with joint less water proofing plaster , curing , testing etc. complete.

Rate is including ten years performance of guarantee bond to be

given on stamp paper. (No extra shall be paid for increase in

thickness for proper slope)

(A) Applying and grouting a slurry coat of neat cemnt using

kg/sqm. of cement admixed with properly water proofing compound

conforming to IS -2645 and 10 mm thick water proofing cement

plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the

surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to

40mm size with 50% of cement mortar 1:4 (1cement :4 coarse sand

) over 10mm thick water proofing cement plaster in cement mortar

1:3 (1 cement ,3 coarse sand) admixed with proprietary water

proofing compound conforming to IS 2645 to required slope and

treating similarly the adjoining walls up to 200mm height incl.

rouding of junction of walls

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

(C) After Two Days of proper curing applying a second floor of

(D) Finishing the surface with china mosaic pieces laid on 10mm

thick joint less cement plaster of mix 1:3(1 cement :3 coarse sand

)admixed with proprietary water proofing compound conforming to

IS :2645 and finally finishing the surface with trowel with neat

(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curring for final taste

All above operation to be done in order and as directed and

specified by the Engineer In Charge.

68 Providing, Fabricating and fixing M.S. GRILL/GATE of approved 4220.00 Kg 75.11 Rupees Seventy Five And Paise

pattern fabricated from M.S. flat,square bars, round bars,c-channel, Eleven Only

box pipe as per detail Drawings. Rate is inclusive of welding with

grinding smooth surface, two coats of Oil paint and one coat of

yellow Zinc primer coat of approved brand only. Oil paint shall be

Luxol Enamel paint of Berger Paint india limited. or asian paint

apcolite premium gloss Enamel of asian paint or Dulux premium

gloss enamel of dulux paint and nerolac synthetics enamel of

nerolac paint for all floor and at any height only. Used Structure

steel Mebmer ISI Mark Only.

69 Steel work, welded in built up sections framed work includig cutting, 25.00 Quntl 9018.30 Rupees Nine Thousand

hoisting, fixing in position and paint. (A) In Beams and joints, Eighteen And Paise Thirty Only

channels angles Tees, flats, with connectiog plates or angle cleats

as in main and cross beams. Hip and jack rafters, purlins conneted

to common rafters and the like. Structural Steel material should

be used ISI marked only.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

70 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS- 126.00 Rmt. 302.54 Rupees Three Hundred Two

13592 of 90mm Dia Complete with Special flings, Compressor type And Paise Fifty Four Only

Fittings, Wall clips on wooden patty including making good the

ceiling and floor on terrace rain water pipe shall be 90 mm Dia.

SWR horizontal pipe and vertical pipe and 90mm bend at the end

near by Ground level rate are Inclusive of all Necessary Fittings

required. [Pipe Fixing Single Pipe Bracket System with U Bolt

Rubber mounted for Pipe Supporting Clamping System or S4

Channel System (S4 Channel+Profile Backet + U Bolt For Multi pipe

fixing & paid Separately in Number Base] for 90 mm dia. Pipe.

71 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil 103.00 Rmt. 245.74 Rupees Two Hundred Forty Five

waste pipe with "O" ring of ISI13592/92, Rate inclusive of all And Paise Seventy Four Only

fittings like single or double "Y" with door, reducer, coupler single T

with door bend, Pipe fixing. [Pipe Fixing Single Pipe Bracket System

with U Bolt Rubber mounted for Pipe Supporting Clamping System

or S4 Channel System (S4 Channel+Profile Backet + U Bolt For

Multi pipe fixing & paid Separately in Number Base] etc.complete

and making good the wall ceiling and floor. (A) 75mm dia

72 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil 74.00 Rmt. 471.36 Rupees Four Hundred Seventy

waste pipe with "O" ring of ISI13592/92, Rate inclusive of all One And Paise Thirty Six Only

fittings like single or double "Y" with door, reducer, coupler single T

with door bend, Pipe fixing. [Pipe Fixing Single Pipe Bracket System

with U Bolt Rubber mounted for Pipe Supporting Clamping System

or S4 Channel System (S4 Channel+Profile Backet + U Bolt For

Multi pipe fixing & paid Separately in Number Base] etc.complete

and making good the wall ceiling and floor. (B) 110mm dia

73 Provinding and fixing in position PVC COWEL VENT to pipe 75 6.00 No. 16.47 Rupees Sixteen And Paise Forty

mm dia directed. Seven Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

74 Provinding and fixing in position PVC COWEL VENT to pipe 110 7.00 No. 28.16 Rupees Twenty Eight And Paise

mm dia directed. Sixteen Only

75 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm 285.00 Sqm 1513.90 Rupees One Thousand Five

thick tile flooring over 20 mm (average) base of cement mortar 1:6 Hundred Thirteen And Paise

( 1 cement: 6 coarse sand) on new surface orfixing on existing Ninety Only

flooring by adhesive including dismentaling of existing flooring and

material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. size and shade as per

approved drawings or as per diection of engineer in charge.

76 Providing and laying 24" x 24" in Skirting riser of steps and dado 24.00 Sqm 1445.20 Rupees One Thousand Four

Double Charge vitrified 8 to 10 mm thick tile over 10 mm thick Hundred Forty Five And Paise

Cement plaster of cement mortar 1:3 (1 cement: 3 coarse sand) Twenty Only

jointed with color cement slurry including finised with flush pointing

& cleaning the surface etc. size and shade as per approved

drawings or as per diection of engineer in charge.

77 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm 35.00 Sqm 1453.19 Rupees One Thousand Four

thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( Hundred Fifty Three And Paise

1 cement: 6 coarse sand) on new surface or fixing on existing Nineteen Only

flooring by adhesive including dismentaling of existing flooring and

material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for Anti Skid.

78 Providing and laying Ceramic tiles 8mm thick in riser of steps 138.00 Sqmt 1013.75 Rupees One Thousand Thirteen

and dado on a bed of 10mm thick cement mortar 1:3 (1-cement : 3- And Paise Seventy Five Only

coarse sand ) finishing with white cement slurry.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

79 Providing and laying 25mm thick mirror Polished (Dimond Cut) 14.00 Sqmt 1108.30 Rupees One Thousand One

Kota Stone Slab Flooring over 20mm thick base of cement mortar Hundred Eight And Paise Thirty

1:6 ( 1 cement : 6 coarse sand) laid over & jointed with grey cement Only

slurry including rubbing & polishing etc. Complete as Directed By

Engineer In Charge For All Floors.

80 Providing and Laying Double Pre Polished (Dimond Cut) 25mm 4.00 Sqmt 1197.10 Rupees One Thousand One

Thick Polished Kota Stone in Skirtings over 10mm thick base of Hundred Ninety Seven And

cement mortar 1 : 3 (1-Cement :3-Coarse Sand) laid over and Paise Ten Only

jointed with grey cement slurry including Rubbing and Polishing etc.

Complete for ALL FLOORS.

81 Providing and fixing both side Mirror polished machine cut KOTA 32.00 Sqm 793.90 Rupees Seven Hundred Ninety

STONE shelve/ partition 20mm to 25mm thick embaded in to wall Three And Paise Ninety Only

at support including racking and finishing smooth the surface

including cutting the stone as and where required etc. complete

including rounding of exposed edges etc. complete.

82 Providing and laying Granite Slab (18 mm thick) of approved 63.00 Sqm 2247.24 Rupees Two Thousand Two

colour & quality & brand, one side polished flooring over 20 mm Hundred Forty Seven And Paise

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) Twenty Four Only

laid and jointed with grey cement slurry including rubbing, curing

including grooving, moulding, nosing of corners and mirror polishing

complete.For flooring of steps, stairs with treads & risers etc.

83 Providing and fixing both side mirror polished machine cut granite 2.00 Sqm 2115.40 Rupees Two Thousand One

shelve/partation 18mm thick embaded in to wall at support Hundred Fifteen And Paise Forty

including racking and finishing smooth the surface including cutting Only

of stone as and where required etc compite including rounding of

exposed edgrs etc complite.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

84 Constructing of cooking platform ( sandwich type ) 68cm width 3.00 Rmt 3797.65 Rupees Three Thousand Seven

and 80cm high resting on thick sandwiched polish Granite Slab in Hundred Ninety Seven And

C.M 1:3 with providing and fixing 25 mm thick rough kota stone at Paise Sixty Five Only

bottom and 20 to 25 mm thick Polish Granite stone ( single piece/

telephonic Black ) top & Vertical and polished granite stone (single

piece/ telephonic Black ) 20 to 25mm thick on top & 18mm thick in

Vertical with 15mm high machine cut polished granite round

moulded Top facia patty including polishing etc . complete as per

drawing and specification without stainless steel sink including

necessary cutting for sink & making hole for gas pipe and fixing

P.V.C bend of 25mm dia

85 Providing and fixing stainless steel ( 304 Grade ) 1mm thick Matt 1.00 No 4269.00 Rupees Four Thousand Two

/ Satin Finish Kitchen sink of over all Minimum size 533mmx Hundred Sixty Nine Only

457mm X 203mm deep having bowl Minimum size 470mm x

395mm x 203mm with cement mortar 1:3 etc.complete.Rate

including of 32mm dia.C.P.brass waste coupling and 32mm dia.rigid

PVC waste pipe upto N.T. S.S.Kitchen Sink Shall be of Nirali,

Navkar, Carysil, Krishna make Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

86 Providing and fixing Alluminium section window having extruded 21.00 Sqm 1807.10 Rupees One Thousand Eight

Aluminum Colour anodized section frame main outer size 95mm x Hundred Seven And Paise Ten

24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), Only

horizontal Three track member size 92mm x 31.75mm x 1.30mm

(of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of

size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt.

1.06 Kg/mt) with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt),

vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

details including one mosquitoe jali shutter With Both Side Locking

Arrangment for ALL FLOORS.

87 Providing and fixing window having extruded alluminum Colour 28.75 Sqm 1696.73 Rupees One Thousand Six

anodized section frame main outer size 63.50 x 38.10 x 1.95mm, Hundred Ninety Six And Paise

@Wt1.094 Kg/Rmt, horizontal two track member size 61.85mm Seventy Three Only

x31.75mm x1.20mm @wt.of 0.695Kg/mt, vertical member of size

61.85mmx 31.75mmx 1.30mm @ wt.of 0.659Kg/mt with sliding

shutters of horizontal member size 40mmx 18mmx 1.29mm @wt.of

0.456Kg/mt, vertical member of size 40mmx 18mmx 1.29mm @

wt.of 0.456Kg/mt, @ Wt.0.457 Kg/mt with 5mmthick transparent

bronze colour tinted float glass with powder coated alluminum

fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etccomplete for window

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

88 Providing and fixing standared extruded of alluminium section of 4.00 Sqm 1163.92 Rupees One Thousand One

size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Hundred Sixty Three And Paise

Kg/mt) with colour anodized alluminium frame for ventilation with 5 Ninety Two Only

mm thick frosted glass as details etc complete for Ventilation

89 Providing and fixing Solid PVC Flush Door Shutter 24 mm 20.00 Sqm 4512.90 Rupees Four Thousand Five

thick,Made from C0-extruded THREE LAYER RIGID PVC foam Hundred Twelve And Paise

sheet(singal Extruded) with density not less than 600 kg/cbm outer Ninety Only

layer 1 mm thick should be of rigid PVC with density of not less than

1400 kg/cbm.Door should be water proof,Termite proof fire

retardant & having good screw holding capacity.providing and fixing

100% Solid Wood Plastic Composite(WPC) Door Frame

90mmX45mm Made from wood plastic composite (Single Extruded

Process) material with density 780 kg/cbm.all as per specification

drawing as directed by the engineer in charge.

90 Providing and fixing Concealed center point to wall, ceiling and 74.00 Rmt 206.73 Rupees Two Hundred Six And

floor CPVC pipes SDR-13.5 PIPE having national sanitation Paise Seventy Three Only

foundation (NSF) seal for potable waterof following dia nominal bore

tube fitting and clamps including making good the wall, ceiling and

floor etc..complete. [B] 20 mm inner dia.

91 Providing & fixing to Concealed center point to wall, ceiling & floor 45.00 Rmt 251.31 Rupees Two Hundred Fifty One

CPVC ( SDR 13.5 ) PIPE having National Sanitation foundation ( And Paise Thirty One Only

NSF ) seal for potable water of following dia nominal bore tube

fitting and clamps including of making good the wall ceiling & floor

etc. Complete (excavation of earth in trenches and filling will be paid

separately) [C] 25mm inner dia.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

92 Providing & fixing to Concealed center point to wall, ceiling & floor 64.00 Rmt 443.29 Rupees Four Hundred Forty

CPVC ( SDR 13.5 ) PIPE having National Sanitation foundation ( Three And Paise Twenty Nine

NSF ) seal for potable water of following dia nominal bore tube Only

fitting and clamps including of making good the wall ceiling & floor

etc. Complete (excavation of earth in trenches and filling will be paid

separately) [E] 40 mm inner dia.

93 Providing & fixing to Concealed center point to wall, ceiling & floor 93.00 Rmt 654.04 Rupees Six Hundred Fifty Four

CPVC ( SDR 13.5 ) PIPE having National Sanitation foundation ( And Paise Four Only

NSF ) seal for potable water of following dia nominal bore tube

fitting and clamps including of making good the wall ceiling & floor

etc. Complete (excavation of earth in trenches and filling will be paid

separately) [F] 50 mm inner dia.

94 Providing & fixing to Concealed center point to wall, ceiling & floor 47.00 Rmt 1312.94 Rupees One Thousand Three

CPVC ( SDR 13.5 ) PIPE having National Sanitation foundation ( Hundred Twelve And Paise

NSF ) seal for potable water of following dia nominal bore tube Ninety Four Only

fitting and clamps including of making good the wall ceiling & floor

etc. Complete (excavation of earth in trenches and filling will be paid

separately) [G] 65 mm inner dia.

95 Providing and fixing in position ISI marked Rotational moulded 10000.00 Liters 3.91 Rupees Three And Paise Ninety

Polyethylene double layer cylindrical vertical storage tank ( IS : One Only

12701 ) water tank size including making inlet and outlet. Over flow

and washout arrangement with G.I. connection including using

necessary M.H. for connection etc. complete with closed cover

including applying two coats of oil painting outside the tank etc.

96 Provinding and fixing gun metal check or non return full way 4.00 No. 416.47 Rupees Four Hundred Sixteen

WHEEL / HANDLE VALVE 25 mm dia. And Paise Forty Seven Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

97 Provinding and fixing gun metal check or non return full way 9.00 No. 656.86 Rupees Six Hundred Fifty Six

WHEEL / HANDLE VALVE 40 mm dia. And Paise Eighty Six Only

98 Providing and fixing gun metal check or non return full way wheel 2.00 No. 2302.33 Rupees Two Thousand Three

valve 50mm (ISI Marked approved brand). Hundred Two And Paise Thirty

99 Providing and fixing S.W. gully trap with C.I. grating brick masonry 13.00 No. 1176.94 Rupees One Thousand One

chamber and watertight precast R.C.C. cover with frame of 300 Hundred Seventy Six And Paise

mm. x 300 mm. size (Inside) with standard weight: (A) square Ninety Four Only

mouth trap 100 mm. x 100 mm. size P trap.

100 Providing and fixing G.I.Rain Water Spout of 50mm Dia. and 30Cm 4.00 No. 100.90 Rupees One Hundred And Paise

Length Ninety Only

101 Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint on 398.00 Sqm 193.02 Rupees One Hundred Ninety

Ceiling / Slope Surfaces (Two Coats) to give an Required shape Three And Paise Two Only

and even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials etc. complete. Rate

are inclussive of Applying Two Coats of Lappy (Putty) and One Coat

of Primer on New celing / slope Surfaces to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth. Fine Putty

Primer and Plastic Emulsion Paint Shall be used as per

approved material list by GSPHC.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

102 Finishing wall with Plastic Emulsion Paint on wall Surfaces (Two 1146.00 Sqm 179.92 Rupees One Hundred Seventy

Coats) to give an Required shape and even shade after thoroughly Nine And Paise Ninety Two Only

brushing the surface to remove all dirt, and remains of loose

powdered materials etc. complete. Rate are inclussive of Applying

Two Coats of Lappy (Putty) and One Coat of Primer on New wall

Surfaces to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and

sand papered smooth. Putty, Primer and Plastic Emulsion Paint

Shall be used as per approved material list by GSPHC.

103 Finishing walls with Weather Proof Exterior Emulsion Paint on 1298.00 Sqm 153.35 Rupees One Hundred Fifty

Wall Surfaces (Two Coats) over and above Applying one coat of Three And Paise Thirty Five

Primer to give an Required shape and even shade after thoroughly Only

brushing the surface to remove all dirt, and remains of loose

powdered materials etc. complete. Primer and Exterior Emulsion

Paint shall be used as per approved material list of GSPHCL.

104 Painting two coats (excluding priming coat) on new steel and other 63.00 Sqm 99.26 Rupees Ninety Nine And Paise

metal surface with enamel paint, brushing, interior to give an even Twenty Six Only

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

105 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat 7.00 No. 5470.90 Rupees Five Thousand Four

Cover & intergal "P" or "S" Trap including Jointing the Trap with Pan Hundred Seventy And Paise

and Soil pipe. Wall hung shall be fixed on S.S heavy duty rack bolt Ninety Only

having 16mm dia, 165mm length using Plastic sleeve Make by

Using Drill Bitt Only. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complet as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge.The

Model & Make of Wall Hung & Flush tank Shall be as per the

Approved Make List of G.S.P.H.C.L.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

106 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive 7.00 No. 565.51 Rupees Five Hundred Sixty Five

of all matreials, Labour & Necessary Fittings etc. Complet as per And Paise Fifty One Only

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Health Faucets Shall be

as per the Approved Make List of G.S.P.H.C.L.

107 Providing & Fixing Single Hole Wash Basin with C.I or M.S. 10.00 No. 3935.33 Rupees Three Thousand Nine

brackete & M. I . fisher union, P.V.C water pipe with Connection Hundred Thirty Five And Paise

from Stop Cock to Pillar Tap, PVC Bottle Trap with Connection Thirty Three Only

32mm dia. C.P. brassa waste coupling etc. Complete. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complete

as per Detailed Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of Wash Basin Shall be

as per the Approved Make List of GSPHCL.

108 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. 5.00 No. 2098.98 Rupees Two Thousand Ninety

brassa waste coupling with Connection 32mm dia waste Pipe etc. Eight And Paise Ninety Eight

Complete. Rate are inclusive of all matreials, Labour & Necessary Only

Fittings etc. Complete as per Detailed Drawings, Specifications and

as per the Instruction of Engineer In charge. The Model & Make of

Urinal Shall be as per the Approved Make List of GSPHCL.

109 Providing & Fixing STOP/Angle COCK 15mm dia make & 16.00 No. 665.51 Rupees Six Hundred Sixty Five

Model No As per Approved material list of G.S.P.H.C.Ltd Incl. with And Paise Fifty One Only

all neccery fitting etc. Complete.

110 Providing & Fixing 15mm One way Bib Tap with Wall Flange. 14.00 No. 990.61 Rupees Nine Hundred Ninety

Rate are inclusive of all matreials, Labour & Necessary Fittings etc. And Paise Sixty One Only

Complet as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model & Make of 15mm One

way Bib Tap Shall be as per the Approved Make List of

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

111 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are 7.00 No 1309.39 Rupees One Thousand Three

inclusive of all matreials, Labour & Necessary Fittings etc. Complet Hundred Nine And Paise Thirty

as per Detailed Drawings, Specifications and as per the Instruction Nine Only

of Engineer In charge. The Model & Make of Two way Bib Tap Shall

be as per the Approved Make List of G.S.P.H.C.L.

112 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel 1.00 No 1330.32 Rupees One Thousand Three

Spout & Wall Flange . Rate are inclusive of all matreials, Labour & Hundred Thirty And Paise Thirty

Necessary Fittings etc. Complete as per Detailed Drawings, Two Only

Specifications and as per the Instruction of Engineer In charge. The

Model & Make of Sink Cock Shall be as per the Approved Make List

113 Providing and fixing 600mm x 450mm bevelled edge Mirror or 10.00 No. 850.90 Rupees Eight Hundred Fifty And

superior glass mounted on 6mm thick A.C. sheet or plywood sheet Paise Ninety Only

and fixed to wooden plugs with C.P. brass screw and washers.

114 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, 7.00 No. 1078.70 Rupees One Thousand Seventy

Labour & Necessary Fittings etc. Complete as per Detailed Eight And Paise Seventy Only

Drawings, Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Towel Rod Shall be as per the

Approved Make List of GSPHCL.

115 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, 10.00 No. 909.08 Rupees Nine Hundred Nine And

Labour & Necessary Fittings etc. Complete as per Detailed Paise Eight Only

Drawings, Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Towel Ring Shall be as per the

Approved Make List of GSPHCL.

116 Providing & Fixing SHOWER WITH ARMS Model no as per 6.00 No. 931.79 Rupees Nine Hundred Thirty

approved material list of GSPHCL incl. all neccery fitting One And Paise Seventy Nine

117 Providing and fixing SS Cloth Hanger (5 Hook) as per detail 13.00 No. 249.85 Rupees Two Hundred Forty Nine

Drawing & as directed Engineer In charge, Rate ar inclusive of all And Paise Eighty Five Only

material, Labour,Taxes (Samrat Brand)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

118 Providing, Supplying and Fixing Single Pipe Bracket System with 70.00 No. 182.83 Rupees One Hundred Eighty

U Bolt Rubber mounted for Pipe Supporting Clamping System for Two And Paise Eighty Three

External Vertical Fixed line with wall distance 3" including nuts, Only

bolts, fastners etc complete as per detailed Specifications and as

directed by Engineer in Charge.

119 Providing and Fixing S4 Channel System (S4 Channel+Profile 90.00 No 421.58 Rupees Four Hundred Twenty

Backet + U Bolt Rubber mounted System) for multiple Pipes for One And Paise Fifty Eight Only

External Vertical Fixed line with wall distance 3" including nuts,

bolts, fastners etc complete as per detailed Specifications and as

directed by Engineer in Charge

120 Pro and Making 3 nos of groove total length of stair case tread of 98.00 Rmt 82.80 Rupees Eighty Two And Paise

size 10mm x 10mm finishind smooth in parallel line.equality spaced Eighty Only

as per direction of engineer in charge in all type of flooring etc

121 Moulding of Kota stone / Granite Stair Tread complete as per 98.00 Rmt 129.95 Rupees One Hundred Twenty

direction of Engineer In Charge. Nine And Paise Ninety Five Only

122 SS Railing Providing & fixing of stainless steel 304 grade pipe 14.00 Rmt 3143.43 Rupees Three Thousand One

railling 0.90 mt Height. Top round pipe (Baluster) of 2" dia vertical Hundred Forty Three And Paise

Balustrade 1.5" x 1.5" at every max.0.90mt c/c and intermediate 3 Forty Three Only

No runners pipe midrail of 1" Dia and SS base plate of 100 x 8mm.

The railing system shall be floor mounted with anchor fastener and

base plate of 100mm size having 8mm thickness completed as per

detailed drawing & as directed by engineer in Charge. Rate are

inclusive of all material, labour, taxes & polishing.Only 16 gauge

Stainless Steel Material should be used.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

123 Fabrication, Supply and Installation of stainless steel (Grade - 304) 24.00 Rmt 911.03 Rupees Nine Hundred Eleven

Railing using hand rail single Pipe section 2" and Round pipe And Paise Three Only

section 2" both these with necessary fixtures fittings, brush finish,

proper buffing & Cleaning the welding marks etc. complete as per

detail drawing OR as directed by the Architect / Engineering in

Charge. Only 16 gauge Stainless Steel Material should be used.

124 Providing and Fixing Teak wood door frame patti 40mm x 10mm 47.00 Rmt 71.01 Rupees Seventy One And Paise

thick as per detail drawing and as directed by engineer in charge. One Only

Rates are inclusive of all material, labour and taxes etc. Complete

125 Providing and Fixing WPC door patti 24mm x 6mm thick as per 37.00 Rmt 57.02 Rupees Fifty Seven And Paise

detail drawing and as directed by engineer in charge. Rates are Two Only

inclusive of all material, labour and taxes etc. Complete.

126 Providing & Fixing Stainless Steel logo size 28" x 21.88" Printed 1.00 No. 49946.21 Rupees Forty Nine Thousand

on 3 M Vinayl with SS Plate size of 5ft x 3Ft and 1mm thick having Nine Hundred Forty Six And

chamfer edge rates are inclusive of all labour, scaffolding, Paise Twenty One Only

material,finishing etc complete as per drawing or as directed by

Engineer in charge

127 Providing & Fixing hydraulic door closer of approved size and 23.00 No. 1585.00 Rupees One Thousand Five

made such as EVERITE/ HYPER/ EGL/ GODREG or equivalent as Hundred Eighty Five Only

directed. All lift, level and leads. Godrej model no. C071

128 Providing & Fixing 3mm thick acrylic sheet with Vinyl letter color- 2.50 sqm 7193.88 Rupees Seven Thousand One

2073-dark grey for back ground and color-2199-white letter with Hundred Ninety Three And

required screws...etc as per required sizes complete etc as per Paise Eighty Eight Only

specification & instruction of Engineer Incharge.

129 P & F stainless steel Letters 32.50cm Height and 4.5cm wide with 30.00 No. 1139.48 Rupees One Thousand One

spraying colour on surface etc. complete as Directed. [For 13" inch Hundred Thirty Nine And Paise

height] Forty Eight Only

130 Providing a I.S.I. mark 7 levers three key brass pad lock of 15.00 No. 211.86 Rupees Two Hundred Eleven

NAVATAL (Godrej) make 65mm dia on completion of project. And Paise Eighty Six Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

131 Providing and fixing pre-cast concrete Kerb Stone of grey Cement 171.00 Rmt 371.21 Rupees Three Hundred Seventy

based concrete block 30cm length,30cm height and 15cm thick of M- One And Paise Twenty One

250 grade concrete as per approved design and including Only

excavation for fixing in proper line and level , filling the joint with CM

1:3 ( 1 cement : 3 fine sand ) etc complete.

132 Providing and fixing pre-cast Rubber Dye inter locking concrete 200.73 Sqm 699.93 Rupees Six Hundred Ninety

block 60mm thick with grade of concrete M-300 pnumatic Nine And Paise Ninety Three

compressed by mechanically pressed and asper approved design Only

including 75mm sand layer for levelling and filling the joint with sand

in proper line and level etc. complele.

133 Providing and lowering laying and jointing in position C.I. D/F. Sluice 4.00 Nos 2316.00 Rupees Two Thousand Three

valves of following class and diameter incl. all taxes, insurance, Hundred Sixteen Only

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores stacking etc.

complete (A1) PN-1 with hand wheell /cap oparated (P.D. type short

Body) [(A1) [2] 50mm Dia

134 Providing and fixing cast iron steps of size 500mm x 150mmx 16.00 Nos 150.00 Rupees One Hundred Fifty Only

22.5mm and painting with two coats of Anti-corrosive paint etc.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

135 Constructing Brick work using common burnt clay Building Brick 26.00 Nos 4256.18 Rupees Four Thousand Two

masonary block in course for under ground inspection chamber and Hundred Fifty Six And Paise

bends with stone of approved quality in cement mortar 1:5 R.C.C Eighteen Only

top slab with 1:2:4 mix (1cement; 2 coarse sand; 4 graded stone

aggregates of 20 mm nominal size) with 8mm dia. Steel at 15cm c/c

and providing and fixing 45 x 45 x 5mm angle frame so as to

provide of size 450mm x 600mm & fixing precast R.C.C cover of

size 60cm x 45cm x7cm foundation concrete 1:5:10 inside plaster

15 mm thick with cement mortar 1:3 finished smooth with floating

coat of neat cement on walls and bed concrete etc. comp. Rate

are also inclusive of outside plaster 15mm thick in cm 1:3 from

top of chamber and all side up to 15cm deep below ground level. (I)

Inside dimensions are 455mm X 610mm X 450mm deep for multi

purpose pipe line.

136 Extra over above item for additional depth of 0.1 m or part 36.00 Nos 239.99 Rupees Two Hundred Thirty

thereof beyond 450mm depth for brick masonary chamber for (I) Nine And Paise Ninety Nine

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

137 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of 36.00 Rmt 229.00 Rupees Two Hundred Twenty

Class SN8 Structured Wall polyethelene Piping systems (Pipe with Nine Only

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage

application as per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete.

(100mm ID Dia) Including Lowering, laying and jointing of class SN

8 structured wall ( External Annular Corrugated & Smooth Internal

surface) Polyethylene Piping and fittings with the help of coupler (

on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the trench,

laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient, depth &

alignment ,testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segments etc. complete as per

drawing, specifications & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per

direction of Engineer-in-charge.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

138 Providing, supplying and fixing Corrugated DWC HDPE Pipes of 99.00 Rmt 396.00 Rupees Three Hundred Ninety

Class SN8 Structured Wall polyethelene Piping systems (Pipe with Six Only

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage

application as per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete.

(150 mm ID Dia) Including Lowering, laying and jointing of class SN

8 structured wall ( External Annular Corrugated & Smooth Internal

surface) Polyethylene Piping and fittings with the help of coupler (

on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the trench,

laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient, depth &

alignment ,testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segments etc. complete as per

drawing, specifications & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per

direction of Engineer-in-charge.

139 Providing & Laying (to level & slopes) and jointing reinforced 8.00 Rmt 429.98 Rupees Four Hundred Twenty

concrete light duty,non pressure pipes I.S. class NP2 of 300mm dia. Nine And Paise Ninety Eight

With collars and butt ends prepared for collar joints including testing Only

of joint etc.complete

140 Providing & Laying (to level & slopes) and jointing reinforced 38.00 Rmt 248.06 Rupees Two Hundred Forty

concrete light duty,non pressure pipes I.S. class NP2 of 150mm dia. Eight And Paise Six Only

With collars and butt ends prepared for collar joints including testing

of joint etc.complete

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

141 Providing & Laying (to level & slopes) and jointing reinforced 30.00 Rmt 356.28 Rupees Three Hundred Fifty Six

concrete light duty,non pressure pipes I.S. class NP2 of 250mm dia. And Paise Twenty Eight Only

With collars and butt ends prepared for collar joints including testing

of joint etc.complete

142 Providing & Fixing Precaste R.C.C.Frame with Cover MD 10 Ton 7.00 Nos 1702.00 Rupees One Thousand Seven

(Rubber Mould Finish) inner size 600 x 450mm with All Neccery Hundred Two Only

143 Providing and Corrugated JSW Pre coated sheet roofing fixing with 43.00 Sqm 984.37 Rupees Nine Hundred Eighty

galvanised iron J or L hooks, Bolts and nuts 8mm Diameter with Four And Paise Thirty Seven

bitumen and G. I. Limpet washer or G. I. Limpet washer with white Only

lead complete excluding the cost of Purlins, Rafter and trusses.

144 Drilling of 215mm dia bore hole in over burden strata by DTH rig 180.00 Rmt 264.00 Rupees Two Hundred Sixty Four

upto required depth including fixing 200mm dia PVC pipe further Only

drilling of 165mm dia bore hole in soft / hard rock by DTH drilling

method upto total depth 150mtr. ( 0 to 150mtr).

145 Supplying, jointing and Lowering 200mm dia size of PVC 10Kg./ 90.00 Rmt 1085.00 Rupees One Thousand Eighty

Sq.cm Pipe of approved quality at site including jointing materials Five Only

etc. completed as directed by Engineer In Charge.

146 Providing and fixing 200mm dia PVC cap with locking arrangement. 1.00 Nos 640.00 Rupees Six Hundred Forty Only

147 Provinding and fixing to wall ceiling and floor 4kg/ cm2 working 8.00 Rmt 528.15 Rupees Five Hundred Twenty

pressure I.S.I mark PVC pipe of 160mm dia high density complete Eight And Paise Fifteen Only

with specials flinges, compressor type fitting, wall clipe on wooden

patty including making good the, ceiling and floor rain water pipe

shall be 160mm dia. PVC horizontal pipe and vertical pipe and

160mm PVC bend at the end near by ground level .

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

148 Box cutting the road surface to proper slpope and chamber for 73.00 Cum 108.33 Rupees One Hundred Eight And

making a base for road work including removing the excavated stuff Paise Thirty Three Only

and disposing on the road side slope as directed upto 50m lead.

149 Granular Sub-base with Black trap crushed stone coarse 22.00 Cum 1193.58 Rupees One Thousand One

Graded Material (Table 400.2)By Mix in Place Method Hundred Ninety Three And

Construction of granular sub-base by providing Black trap crushed Paise Fifty Eight Only

stone well graded material, spreading in uniform layers with motor

grader on prepared surface, mixing by mix in place method with

rotavator at OMC, and compacting with vibratory roller to achieve

the desired density, complete as per Technical Specification

For Grading I Material.

150 (I) Supplying of murrum/binding material 7.00 Cum 303.20 Rupees Three Hundred Three

And Paise Twenty Only

151 Spreading blindage/murrum/road crust filling the gaps in metal 7.00 Cum 153.31 Rupees One Hundred Fifty

and levelling to camber and gradient as directed. Three And Paise Thirty One

152 WBM Grading 3 Providing, laying, spreading and compacting 33.00 Cum 1625.49 Rupees One Thousand Six

stone aggregates of 53 to 22.4 mm sizes to water bound macadam Hundred Twenty Five And Paise

specification including spreading in uniform thickness, hand Forty Nine Only

packing, rolling with smooth wheel roller 80-100 kN in stages to

proper grade and camber, applying and brooming, stone

screening/binding materials to fill-up the interstices of coarse

aggregate, watering and compacting to the required density

grading 3 as per Technical Specification Clause

By Manual Means

153 Rolling & consolidation water bound macadam (except laterite 615.00 Sqm 15.72 Rupees Fifteen And Paise

and kankar) including watering not exceeding 150mm thk. (Main Seventy Two Only

layer incl. binding materials) includining filling in depression which

occurs during the process. (B)with Power roller exceeding 8 tonne

and not exceeding 12 tonne.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

154 Construction Of Concrete Road Using Trimix System Having of any 37.00 Cum 4722.38 Rupees Four Thousand Seven

Thickness M-300 Concrete Mix With Providing And Fixing & Hundred Twenty Two And Paise

Removing Of "C" Channel Having Size 75Mm. X75Mm As Per Thirty Eight Only

Required Level Slope And Thickness Of Concrete Road Floor

Levelling Of Place Concrete With Surface Vibrator

Machine,Dewatering System Device Finishing With Power Floater

Machine And Trowel Light Brooming On The Surface As Directed

With Providing Expansion Joint Size 20 X 190Mm. Using Of

Concrete Cutter Machine Including Curing Etc. Complete.

155 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks 80.00 No 323.00 Rupees Three Hundred Twenty

Raised Pavement Markers made of polycarbonate and ABS Three Only

moulded body and reflective panels with Micro prismatic lens (No

Glass bead lens) capable of providing total internal reflection of the

light entering the lens face and shall support a load of 13635 kgs.

tested in accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and the slope to

the base shall be 35 +/- 5 degree. The strength of detachment of

the integrated cylindrical shanks, (of diameter not less than 19 +/-

mm and height not less than 30+/- 2 mm) from the body is to be a

minimum value of 500 Kgf. Fixing will be by drilling holes on the

road for the shanks to go inside, without nails and using epoxy resin

based adhesive as per manufacturer‟s recommendation and The

color of thsubmitted regularly to G.S.P.H.C.L. & also get satisfactory

certificate from ben

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

156 Road marking with hot applied thermoplastic paints with 12.00 Sqm 364.08 Rupees Three Hundred Sixty

reflectorising glass beads on bitumin surface providing and laying a Four And Paise Eight Only

hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/ edge

line/cut patta. The white color marking should provide liminance

coefficinet on cemend road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min 100 mcd/m2/lux during the service life

during the day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid resistance

as mentioned in the section-15 of IRC 35-2015. Warranty for the

Retro reflectivity should be two years.

157 Providing and fixing Rubber Speed Breaker of Size-500 (L) x 350 18.00 Rmt 1165.50 Rupees One Thousand One

(W) x 50(H) of 2 pieces in 1 Meter (1 No. Yellow & 1 No. Black ) Hundred Sixty Five And Paise

installation with 4 inch zink plated 12mm thick bolt with epoxy Fifty Only

hardner etc. Complete as per direction of Engineer incharge.

158 Providing and lixing CAPCELL HD 100 pre- moulded compressible 8.00 Sqm 795.27 Rupees Seven Hundred Ninety

filler board in black colour confirming to MORT&H Specifications Five And Paise Twenty Seven

(Clause 1015). having minimum density 95kg/cum.metre, non- Only

staining with less than 1% water absorption & compression recovery

of 93% minimum as per specification for 20 mm wide expansion

joint including cutting to required size and shape at all levels etc.

complete as directed.

159 Providing and fixing 25 mm diameter backup rod having minimum 38.00 Rmt 17.62 Rupees Seventeen And Paise

density 22 kg per cum (ASTMD - 3575) & compression strength of Sixty Two Only

0.40 kg per sqm (ASTM 5249) and finishing with polysulphide

sealant etc. complete. For 20 mm wide expansion joint

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

160 Providing Groove cutting in C.C. Road incluing cleaning 53.00 Rmt 36.80 Rupees Thirty Six And Paise

etc.complete as per direction of Engineer incharge Eighty Only

161 Provoding pre-moulded ashphalt filler joints as per drawings 53.00 Sqm 696.56 Rupees Six Hundred Ninety Six

(A)12mm And Paise Fifty Six Only

162 Provinding & Laying Lawn for Landscaping including watering & All 41.00 Sqm 150.00 Rupees One Hundred Fifty Only

163 Providing & Laying Tree plantation including providing and fixing 30.00 Nos 600.00 Rupees Six Hundred Only

tree guard. Rate also inclusive of maintaining the tree plant in live

condition at the time of completion of work. Rate are including

providing necessary tree guard.

164 Job Work of Geohydrological ground water investigation 1.00 Job 14286.00 Rupees Fourteen Thousand Two

including water sample chemical analysis including Pin-Point Hundred Eighty Six Only

survey. [with Veichel Charges]

165 Supplying of bore plug of made from 5mm thick M.S. plate with 3 1.00 No 1343.92 Rupees One Thousand Three

holes at equal distance on circumferance for nut bolt and locking Hundred Forty Three And Paise

arrangements. Ninety Two Only

166 Pumping test of the Bore well by submersible pump of adequate 1.00 Job 17250.00 Rupees Seventeen Thousand

capacity & with necessary pumping machinery & pipe line running Two Hundred Fifty Only

minimum for 20 hours including submission of Bore chart &

discharge of Bore.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

167 Supply, installation testing and commissioning of the following MS

„C' class pipe as per IS1239 / 3589 with welded / flanged / screwed

joints and with clamps,hangers, brackets / pipe supports as required

including MS pipe of shorter lengths, tapering connecting pieces,

short or long bends, couplers, unions, elbows, reducers, plugs, tees,

etc. complete to make the system operative.The pipes will have to

be suspended from PEB members / ceilings or fixed on wall as

shown in drawings with anchor fastners. The work shall include

making holes in structural member/ brick or RCC walls, slabs/ roofs

and making good the damages by bringing to the original condition

and painting two coats of approved shade (Post office red) of

enamel paint over a coat of approved primer for over ground /

overheads pipes. (Riser & Basement piping)

[A] 150 mm dia 77.00 Rmt 3335.04 Rupees Three Thousand Three

Hundred Thirty Five And Paise

[B] 100 mm dia. 40.00 Rmt 2240.48 Rupees Two Thousand Two

Hundred Forty And Paise Forty

[C] 80 mm dia. 21.00 Rmt 1652.00 Rupees One Thousand Six

Hundred Fifty Two Only

[D] 25 mm dia. 10.00 Rmt 651.00 Rupees Six Hundred Fifty One

168 Providing and fixing of CI Butterflay valve ISI marked with

gunmetalworking parts with stainless steel spindel with necessary

jointinh materials filing etc. complete as directed.

[A] 150 mm dia 3.00 No 7856.34 Rupees Seven Thousand Eight

Hundred Fifty Six And Paise

Thirty Four Only

[B] 100 mm dia. 6.00 No 5845.97 Rupees Five Thousand Eight

Hundred Forty Five And Paise

Ninety Seven Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

[C] 80 mm dia. 3.00 No 4368.46 Rupees Four Thousand Three

Hundred Sixty Eight And Paise

169 Providing, fixing, testing and commissioning of non-return valve of

following sizes conforming to IS: 5312 complete with rubber gasket,

GI bolts, nuts, washers etc. as required,

[A] 150 mm dia 2.00 No 15594.79 Rupees Fifteen Thousand Five

Hundred Ninety Four And Paise

Seventy Nine Only

[B] 100 mm dia. 6.00 No 9688.87 Rupees Nine Thousand Six

Hundred Eighty Eight And Paise

Eighty Seven Only

[C] 80 mm dia. 2.00 No 6743.74 Rupees Six Thousand Seven

Hundred Forty Three And Paise

Seventy Four Only

170 Providing, fixing, testing and commissioning of Gun metal /SS 4.00 No 5382.66 Rupees Five Thousand Three

single headed ISI marked oblique pattern hydrant landing valves Hundred Eighty Two And Paise

as per IS:5290 with 80mm dia flanged inlet and 63mm dia female Sixty Six Only

outlet complete with gun metal cap.

171 Providing, fixing, testing and commissioning of Standard Gun /SS 4.00 No 1457.27 Rupees One Thousand Four

metal branch pipe with nozzle of 20 mm nominal bore outlet as per Hundred Fifty Seven And Paise

IS:903 suitable to fit with standard instanteneous type 63 mm dia Twenty Seven Only

172 Providing and fixing 63 mm dia reinforced rubber lined RRL RRL 4.00 No 3899.90 Rupees Three Thousand Eight

fire hose of approved grand conforming to IS 636 type A having Hundred Ninety Nine And Paise

brushing pressure of 37.20 Kg/cm2 and 2 Nos of ISI marked of 15 Ninety Only

mtr length fitting with necessary gun metal 63 mm delivered hose

pipe with 63 mm dia. Male and female gun metal couplings duly

binded with GI wire, rivets etc. conforming to IS 636 (type-A) as

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

173 Providing, fixing, testing and commissioning of Weather proof 4.00 No 3154.48 Rupees Three Thousand One

standard fire hose cabinet having single opening with M.S. Hundred Fifty Four And Paise

Fabricated Stand, necessary locking arrangement by allan key Forty Eight Only

suitable for housing 2 nos. hose pipe, 1no. Branch pipe & nozzle

174 Supplying and fixing specially designed SS 304 orifice plates 4.00 No 1158.53 Rupees One Thousand One

(minimum 6 mm plate thickness) on external & internal hydrant Hundred Fifty Eight And Paise

outlets of hydrant valves for reducing delivery pressureto 3.5 kg/ Fifty Three Only

sq.cm at hydrant valve

175 Supplying & fixing first aid fire hose reel of braided rubber 4.00 No 7606.61 Rupees Seven Thousand Six

suitably reinforced 25 mm size 30 mtr standard length with Hundred Six And Paise Sixty

tapering branch nozzle, 32 mm Pipe to connect to riser with cut off One Only

ball valve attachment. Hose to be fixed type wall mounted drum

including fixing with anchor fasteners & bolts

176 Providing & eracting connection of siemens connection with 1.00 No 12252.93 Rupees Twelve Thousand Two

necessary fitting at our required place of the fire hydrant system as Hundred Fifty Two And Paise

directed. Gate connection Ninety Three Only

177 Supply, Installation, Testing & commissioning of 25 mm dia gun 4.00 Set 1097.50 Rupees One Thousand Ninety

metal ISI mark Gate Valve with 15 mm dia nipple as complete as Seven And Paise Fifty Only

178 Supply & Installation of Mainfold for fire hydrant distrubution 200 2.00 No 1355.48 Rupees One Thousand Three

mm dia system as directed. Hundred Fifty Five And Paise

Forty Eight Only

179 providing & fixing emergency Escape signes and Fire Signes 456.00 Sq.inch 7.95 Rupees Seven And Paise Ninety

Printed on rigid PVC sheet / acrylic sheet 4 mm thick Five Only

photoluminescent auto glow type of approved quality including fixing

on door, wall, celling complete with installation as directed.

180 Making of Core in RCC work of size 200 mm etc. complete RCC 10.00 Nos 1000.00 Rupees One Thousand Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

181 Getting provisional NOC and Final NOC and Renewal of NOC 1.00 Job 16950.00 Rupees Sixteen Thousand Nine

(During Defect Liability Period) for Fire Hydrant,Sprinkler system, Hundred Fifty Only

Fire Extinguisher, Fire alarm system etc. from local fire authority or

any other relevant statutory authority at initial stage and required

various other stages of construction work, including preparation of

reports/drawings as per fire authority requirement. Rate also

includes renewal of Fire NOC during defect liability period as per

requirement. Main agency has to give demonstration of all fire

system to fire officer police / concern beneficiaries & GSPHCL.

Agencyhas to submit FDR of approved bank as per clause 2.0,

section 3, of Rs 20000.00 Or Quoted rate which ever is higher to

GSPHCL for minimum maturit period of Four years in favour of

GSPHC, which will be released after Successful Submitting of All

Fire NOC at the completion of defect liability period. Renewal Fire

N.O.C. shall be submitted final S.D.proposal.

Agency has to borne charges like preparing and submission of all

the documents, Photographs, CD/DVD required togetthe N.O.C.

from concern fire department and also liaisoning work with concern

departments. Main civil agency has to get the pre-NOC from fire &

emergency department well before starting civil & the fire hydrant

work including sump & pumproom work. For that professional &

experience fire agency has to prepare drawing of fire hydrant

system, sprinkler system, firealarm system, DGset etc. as per

tender item and making floor layout of all fire pump panel, cable

earthing etc in pump room. If any changes required in drawings of

sump & pump room. Main agency has to inform in written before

excavation of pump & sump room.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

Agency has to calculate the total head & discharge required as per

NBC / local fire office requirement and as per site situation and

submit fire pump OEM specification curve foundation detail etc &

get approval of cable, panel drawings & specification. After

completion of firehydraunt related work as perpre-NOC, tender

specification & drawing approved by fire department, agency has to

do site visit with fire department & give the testing & demonstration

to fire officer & get the final NOC before handingover of the building.

Agency has to give livetesting & demonstration of all system to

GSPHCL & police department jointly.For fire NOC fee separate item

is taken in tender. Agency has to quote the rate as per latest

Gazette in respective tender item.

182[a] Providing and erecting Point wiring with 1.1 KV grade ISI marked 110.00 Point 481.00 Rupees Four Hundred Eighty

2 X 1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm One Only

(green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution erected on/in Brick Wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner zari for PVC

pipe and boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved make 5/6

Amp. ISI make modular type switch and accessories mounted in

G. G.I. company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD

Connector (make & model approved by EIC and matching colur with

switches accessories) as directed for concealed wiring. (Deep

Junction box 75mm depth if required) Light point. Cat.-III.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

Necessary sheet / tape / polythene / sand must be erected or filled

in all box to prevent mortar going into the box. Length of point wiring

must not increase than 10 mtr. For that necessary switch boards

and their locations must be finalised before execution by agency

otherwise payment will not be done for extra long point. (For future

extention, if required, agency has to erect one higher size metal box

and modular plate as per instruction of EIC. Cost of blank plate shall

be paid as per tender item) [Wire must be having box packing] [This

item include cleaning (inside/outside) of all G.I. switch boards,

electric point box, fan box, MCBDB & box cutting plaster finishing

for modular plate B14without any gap] [conductor resistance should

be as per IS:8130/1984]

1[82b] For Two Way Controlled Light Point, Cat.-III 2.00 Point 598.00 Rupees Five Hundred Ninety

182[c] For Bell Point Cat.-III 2.00 Point 481.00 Rupees Four Hundred Eighty

182[d] For Fan Point (with 6 A. Modular type switch and two module hum 26.00 Point 668.00 Rupees Six Hundred Sixty Eight

free EME Five step type Electronic fan regulator both having ISI Only

182[e] For Two way controlled Fan Point (with 6 A. Modular type switch 2.00 Point 785.00 Rupees Seven Hundred Eighty

and two module hum free EME Five step type Electronic fan Five Only

regulator both are with ISI Mark)) Cat.-Ill

182[f] For separate Point (with 6 Amp. Switch & 3/5 pin socket both 15.00 Point 505.00 Rupees Five Hundred Five Only

having ISI mark) Cat.-III

182[g] For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket 50.00 Point 255.00 Rupees Two Hundred Fifty Five

both having ISI mark) Cat.-III. Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

183[a] Providing and erecting 1.5 mm thick FIA approved and ISI mark 460.00 Mtr. 24.00 Rupees Twenty Four Only

(embossed) RIGID white Colour PVC PIPES of following size

complete erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution concealed in wall / slab along with

contineous fish wire to draw mains, laid in approved manner with

plastering by cement mortar & finishing the surface to match the

wall / ceiling. 20 mm dia.

183[b] 25 mm dia. 200.00 Mtr. 33.00 Rupees Thirty Three Only

184[a] Providing and laying Mains with FRLS PVC Insulated wire ISI 550.00 Mtr. 62.00 Rupees Sixty Two Only

marked 1.1 KV grade with FIA approved ISI mark medium class

20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting fixed

with adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner

with plastering by cement mortar & finishing the surface to match

the wall / ceiling complete with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS

copper multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard colour

code. [conductor resistance should be as per IS:8130/1984]

184[b] 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains 300.00 Mtr. 82.00 Rupees Eighty Two Only

with 1.5 sq.mm. FRLS copper multi stranded conductor for

earthing as per standard colour code. [conductor resistance should

be as per IS:8130/1984]

184[c] 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains 100.00 Mtr. 111.00 Rupees One Hundred Eleven

with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing Only

as per standard colour code. [conductor resistance should be as

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

184[d] 2 x 10.0 sq.mm. FRLS copper multi stranded conductor mains 150.00 Mtr. 234.00 Rupees Two Hundred Thirty

with 4.0 sq.mm. FRLS copper multi stranded conductor for Four Only

earthing as per standard colour code. [conductor resistance should

be as per IS:8130/1984]

184[e] 4 x 10.0 sq.mm. FRLS copper multi stranded conductor mains 60.00 Mtr. 421.00 Rupees Four Hundred Twenty

with 2.5 sq.mm. FRLS copper multi stranded conductor earthing One Only

As per standard colour code.[conductor resistance should be as per

IS:8130/1984] [ As Provision ]

185 Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated 50.00 Mtr. 30.95 Rupees Thirty And Paise Ninety

Flexible pipe with necessary socket, PVC bushes, saddle, Check- Five Only

nuts etc. complete of following sizes.

186 Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated 50.00 Mtr. 37.14 Rupees Thirty Seven And Paise

Flexible pipe with necessary socket, PVC bushes, saddle, Check- Fourteen Only

nuts etc. complete of following sizes.

187 Providing and fixing Plug Point wiring with 1.1 KV grade ISI 8.00 Point 738.00 Rupees Seven Hundred Thirty

marked approved make 2 x 2.5 sq.mm copper PVC insulated FRLS Eight Only

wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for

earth continuity in FIA approved ISI mark white colour medium

class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected in wall/slab along with

continuous G. I. fish wire to draw wires and laid in approved

manner zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the wall / ceiling complete

with 16 Amp Modular type Swich and accessories mounted in

G. GI company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall. (a) 16 Amp. Indicator

switch & 1 No. 6/16 A universal socket white colour suitable for

3 pin top duly both having ISI mark. Cat.-III (Necessary sheet /

tape / polythene / sand must be erected or filled in all box To

Prevent Mortor Going In To The Box) [conductor resistance should

be as per IS:8130/1984]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

188 Providing and fixing Plug Point wiring with approved ISI marked 4.00 Point 863.00 Rupees Eight Hundred Sixty

1.1 kv grade 2 x 4.0 sq.mm copper PVC insulated FRLS wire with Three Only

2.5 sq.mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark white colour medium class

20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected in wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner zari for PVC

pipe & boxes shall be filled with cement mortar & finishing the

surface to match the wall / ceiling complete with approved make

Amp. Modular type switch and accessories mounted in 20 SWG GI

company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall / ceiling. (a) 20 Amp.

indicator switch & 1 No. 20 A universal socket white colour

suitable for 3 pin top duly both having ISI mark. (A.C POINT

ONLY) (Necessary sheet / tape / polythene / sand must be erected

or filled in all box To Prevent Mortor Going In To The Box) Cat.-III.

[conductor resistance should be as per IS:8130/1984]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

189 Providing & Erecting 2.0 mtr long Earthing system by making 4.00 Each 7025.00 Rupees Seven Thousand

minimum bore of 225 mm dia in soft soil. Suitable for doing pipe-in- Twenty Five Only

pipe technology earthing.Earthing electric rod must be made from

Corrosion free Hot dip galvanizing pipes having following

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B '

Class ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum

O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that

pipe must be pressed and gave rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any

where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole

must be provided at terminal. total minimum Weight(approx.) of

earth electrodewith inside conductive material minimum should be

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to

retain moisture for long time Back Filling Compound weight is

Kg. (D) Chamber and cover:- Earthing chamber should be size of

400 mm X 400 mm X 400 mm depth and Cover should be heavy

duty cast iron with required size of 300 mm X 300 mm X 4 mm

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing. Earthing

value must be measured with earth tester. Agency has to bring the

earth resistance to at least 02 ohms & voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value

for one year. Earthing must be done in the presence of A.E.

190 For Above Earthing Additional charges for boring in hard rock soil 4.00 Each 276.00 Rupees Two Hundred Seventy

(By Breaker) & filling soft soil in earth pit. (Certificate for soil have to Six Only

given by DEE/AE along with Photographs).

191 Supplying and erecting M.S./G.I. metal box having 16 Gauge 150.00 Sq. Inch 5.81 Rupees Five And Paise Eighty

painted with red oxide be concealed in wall with necessary One Only

plastering & finishing with 3 mm thick laminated sheet with grooving

as directed of following depth 3" depth.

192 Providing & Erecting 3 mm thick Polycarbonate (PC) sheet with 500.00 Sq. Inch 3.00 Rupees Three Only

grooving as directed

193 Providing & Erecting 3 mm thick acrylic Sheet with grooving as 500.00 Sq. Inch 3.00 Rupees Three Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

194 Supplying & erecting approved make street light box comprising 2.00 Each 1646.00 Rupees One Thousand Six

CNC Processed robust housing made FRLSom single sheet multi Hundred Forty Six Only

folded with high grade powder coating (RAL-7032 Structure finish

as Standard) of IP-55 degree of Protection Gasket (PU Gasketing)

of following size of Box. [i] 350 mm X 200 mm X 150 mm [Make

and model approved by EIC strictly as per tender specification]

195 Supplying & erecting approved make SMC press moulded 6.00 Each 472.00 Rupees Four Hundred Seventy

composite FRP. loop-in, loop-out approx. 2mm thick box complete Two Only

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

mob & hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box.150mm x 125mm x 100mm [deep]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

196 Supplying and Eracting LED indoor fitting of approximately 4 Feet 15.00 Each 370.00 Rupees Three Hundred Seventy

long with LED of Wattage 0.2W to 0.5W assemble on single Only

MCPCB with housing use as a hint sink shall be made from

aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following

specification: (A) Company mark/name on the fitting, (B) Rated

input voltage and frequency : 220V to 240 VAC ; 50Hz , (C) Rated

input wattage: 24W, (D) Rated input Current 0.2 A, (E) Power

Factor : Min. 0.90, (F) ATHD : Max. 15%, (G) Rated Luminous flux :

2420 lm, (H) CCT : 6500K , (I) CRI : Min. 80Ra, (J) LED life span :

Min.5000 Hrs @ L70, (K) Driver Efficiency : Min. 80%, (L) Over

Voltage protection: Withstand up to 440V/AC for 4 Hrs, (M) Surge

Protection : Min. 2KV, (N) IP Rating : IP20, (O) IK Rating : IK02, (P)

Short circuit, Open Circuit & Reverse Polarity Protection must be

provided, (Q) Fixing clamp design & strength should be sufficient to

hold the fitting eracted on wall or ceiling, (R) 3 Core copper wire of

appropriate size with earthing connector. (Note:- The

manufacturer/authorized Channel partner of the manufacturer has

to submit 5 Yrs free replacement Guarantee for complete Fixture) [

Approval will be given strictly subject to item specification]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

197 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 40.00 Each 751.00 Rupees Seven Hundred Fifty

Cool/Warm white Color LED Down lighter office Lighting One Only

Luminaire with separate potted driver with single piece pressure die

cast aluminium alloy housing with corrosion resistant powder coated

finish with PMMA/PS/Injection moulded Polycarbonate diffuser with

high brightness LED complete CRI > 80, with 24 W. The LED's

should be mounted on backlite metal core PCB for better heat

conduction and long life of LED. The Fixture should comply all

International Standarad third party (LM 79 for complete fixture,

LM80 for individual LED). The Fixture have protection like miswiring,

over voltage, over load, wrong wiring, THD < 15%,, P.F > 0.95,

efficacy > 90 lm/w & driver efficiency > 85%. For 24 W fixture wide

voltage range from 160 V to 270 V, 50/60 HZ @ 240V application,

KV surge protection.

The fixure must have min. 2160 lumen light output.The fixture

should be provided with external separate Potted driver, latest Valid

BIS approved Luminaire and driver. The Fixture efficacy >

lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false

ceiling. The Luminiare should be tested as per IP 20 and following

test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirment [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs. free replcement

Guarantee for complete Fixture]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

198 SITC of Indoor Commercial Recess / Surface mounted (IP20) 18 W 20.00 Each 584.00 Rupees Five Hundred Eighty

Cool/Warm white Color LED Down lighter office Lighting Four Only

Luminaire with separate potted driver with single piece pressure die

cast aluminium alloy housing with corrosion resistant powder coated

finish with PMMA/PS/Injection moulded Polycarbonate diffuser with

high brightness LED complete CRI > 80, with 18 W. The LED's

should be mounted on metal core PCB for better heat conduction

and long life of LED. The Fixture should comply all International

Standarad third party (LM 79 for complete fixture, LM80 for

individual LED). The Fixture have protection like miswiring, over

voltage, over load, wrong wiring, THD < 15%,, P.F > 0.95, efficacy >

90 lm/w & driver efficiency > 85%. For 24 W fixture wide voltage

range from 160 V to 270 V, 50/60 HZ @ 240V application, 2 KV

surge protection.

The fixure must have min. 1620 lumen light output.The fixture

should be provided with external separate Potted driver, latest Valid

BIS approved Luminaire and driver. The Fixture efficacy >

lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false

ceiling. The Luminiare should be tested as per IP 20 and following

test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirment [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs. free replcement

Guarantee for complete Fixture]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

199 Supplying and erecting 8 W LED lamps with following wattage 17.00 Each 111.00 Rupees One Hundred Eleven

capacity of 220 to 240 voltage, minimum 15000 burning hours life, Only

500 V in built-surge protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP holder

200 Providing and erecting max. 10 W LED battern having main 10.00 Each 309.00 Rupees Three Hundred Nine

housing alluminium extruded and front cover of polycarbonate. Only

Electrically and photomatry parameters are as under 240 V, 50 Hz.

System wattage : 10W + 10%, PF >=0.95 system lumens min.

, CCT 3000K to 6500K CRI>=80, THD,=15%, Delivery efficiency>=

85%, LM 80 Certified LED, 3000 Hrs@ L70. Electronic CC driver,

insulated copper wire, for internal wiring IP20 Operating voltage:

160 to 270 V, Surge-22KV, Length of this fitting should be 2ft.

Luminaire efficiency> 85 lemnes/watt, LED driver efficiency . 85 % (

fitting required LM-79 & LM-80 Certificates)(Note: Below description

have shown ranges of Wattage capacity of LED fittings.

TheEngineer incharge may select any wattage capacitybetween the

ranges shown.) Tube Light with integral driver 8 Watts, Surge-2 KV,

IP-20, conventional 2 feet.

201 Providing and erecting Polycarbonet body surface mounting LED 3.00 Each 780.00 Rupees Seven Hundred Eighty

Bulk head type 9 watt Lighting Fitting with electronic driver having Only

THD < 15%, CRI>80, P.F.0.95 And lumen output from luminaire

720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000

to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to +

60 deg C working temperature, AL frame with Beam Angle 120 deg.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

202 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 27.00 Each 1929.00 Rupees One Thousand Nine

AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must Hundred Twenty Nine Only

be as per below. (1) Sweep: 1200 mm, (2) Operating Voltage:

to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption:

maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium

quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two Nos.

Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per

is 1709-1984, Aluminium body premium quality, Branded make,(14)

Down road: up to 1.0 mtr as per site requirment, (15) Required

fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site

requirment, (17) No vibration and noise due to mechanical parts.

(Agency has to erect safey wire with ceiling fan and checked with

EIC) (OEM has to approved model as per tender specification and

tested at ERDA) (Necessary test reports should be submitted strictly

at the time of approval. Sample approved by EIC subject to above

specification only)

203 Supplying & erecting approved make low noise Decorative 8.00 Each 1687.00 Rupees One Thousand Six

exhaust fan having size 150/200 mm with 1350 RPM with round / Hundred Eighty Seven Only

square frame ABS/metalic body with Grill / inbuilt lowers. (make

and model approved by EIC Only strictly as per specification) Cat II

204 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded 30.00 Each 125.00 Rupees One Hundred Twenty

to the RCC bars up to 50 mm Length each side & piereced through Five Only

18 Gauge G.I Box having 125 mm dia depth of 75 mm complete

erected concealed in ceiling with necessary round modular plate

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

205 Providing & erecting Fan clamp of 30 x 5 mm flat of required 10.00 Each 98.00 Rupees Ninety Eight Only

length & 10 mm M.S. Bolt & Nuts erected with necessary hook of

mm M.S. Round Bar.

206 Supplying & erecting Electronic Type Cordless Call Bell erected 2.00 Each 248.00 Rupees Two Hundred Forty

on PVC/Metal board having portable bell push working on D.C. & Eight Only

bell on 230V A.C. supply with cells / battery

207 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / 5.00 Rn. Mtr 107.00 Rupees One Hundred Seven

M.S. pipe down rod erected duly painted for fan complete with Only

necessary 24/0.2 flat 3 core flexible Core with earthing. [The down

rod thikness, hole, locking arrangement, construction, poweder

coating, colour shed should be same as original down rod brought

with ceiling fan. For that agency has to give original down rod

sample to fabricator and one sample down rod should be approved

with EIC. After approval given by EIC, agency can use the down rod

as per approved sample. If without approval down rod will be

erected on site, agency has to replace them with own cost.]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

208 Providing & erecting weather proof, dust & vermin proof, floor 2.00 Sq. Mtr. 16230.00 Rupees Sixteen Thousand Two

mounted front operated indoor type cubical panel board having IP- Hundred Thirty Only

42 & above protection as per approval from engineer incharge and

made from 2 mm. thick CRC M.S. sheet for outer body & doors,

mm. thick CRC M.S. sheet for internal partitions with necessary

supporting angles, flats including skirting, bending, drilling, welding,

riveting with internal partitions & cable alley as per requirements &

instruction of engineer-In-Charge with erection of supplied

switchgears, busbars with suitable size of interconnecting PVC

copper wire / Copper-Aluminium strips, rubber gromets, rib, control

wires, backelite control fuses, measuring instruments, earth bus &

earth bolts, foundation flange-bolts-base plates, sufficient nos. of

hinged doors, handle with locking arrangement, rubber gasket

complete with Required Nos. heavy Duty Connector with Cadmium

plated nut and bolt for Anti rusting

The panel shall be supplied with Seven Tank chemical process

which shall be carried out before applying painting, painted with

powder coating. (The rates excludes the cost of switchgears,

busbars, interconnecting mains & Copper / Aluminium strip, fuse,

meters etc. The dimension shall be measured excluding base

beams) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory as per IEC 61439 and

shall be certified by that company whose switch gears are used

after fabrication for beneficial use. With 350 mm depth

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

Panel manufacturer have to give 3 years maintenance and service

support if in case of breakdown or fault. Panel manufacturer have to

submit electrical meter calibration report. Agency should design the

panel in such a way that there should not be any excess in panel

area (sq.mtr) & length of bus-bar (mtr), if any excess occurs draw

attention to GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and

skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the item.

Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by

agency's engineer before giving order. If found any problem in size

discuss with GSPHCL engineer for rectification before giving order.

[Including Necessary numbering / marking on PANEL done with red

colour radium sticker as per site requirement and instructions given

by EIC on site. Font / number size given by EIC on site as per

requirement](All Panel as per IEC 61439 as per NBC Guideline)

209 Providing & erecting Approved make Three pole moulded case 1.00 Each 6510.00 Rupees Six Thousand Five

circuit breaker having breaking capacity ICU of 35 KA. at 415 V. Hundred Ten Only

having Normal current rating 125 A. with variable/Fixed Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing. ICS=100% ICU Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

210 Providing & erecting Approved make Three pole moulded case 1.00 Each 5302.00 Rupees Five Thousand Three

circuit breaker having breaking capacity ICU of 35 KA. at 415 V. Hundred Two Only

having Normal current rating 100 A. with variable/Fixed Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing. ICS=100% ICU Only

211 Providing & erecting Approved make Four pole moulded case 3.00 Each 6112.00 Rupees Six Thousand One

circuit breaker having breaking capacity ICU of 25 K.A. at 415 V. Hundred Twelve Only

having normal current rating 63 to 100 A. with variable/Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% ICU Only

212 Supplying & erecting approved make Four Pole 415V change 2.00 Each 7713.00 Rupees Seven Thousand Seven

over switch interior for panel mounting with operating Hundred Thirteen Only

mechanism A.C.23 duty confirming to IS for [c] 100-125A

213 Supplying & Erecting Approved Make Extended operating rotary 5.00 Each 865.00 Rupees Eight Hundred Sixty

handle with pad lock with three position Trip, Off, On suitable for 25 Five Only

Amp. to 250 Amp. panel mounting.(Company Must be same

company of switchgear)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

214[a] Supplying and erecting tripple pole & neutral 440V / 500 V Panel 0.50 Rn. Mtr. 1942.00 Rupees One Thousand Nine

mounting Copper Busbars with four equal Nos. of electrolyte bus Hundred Forty Two Only

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wraped with colour insulating tape

for phase sequence of following current carrying capacity, erected

with necessary bus bar supports / insulators, main cable socket to

each bar, erected in existing cubical panel with necessary

connections.For electrolyte copper Busbars Suitable for 100 Amp.

214[b] Suitable for 200 Amp. capacity 2.00 Rn. Mtr. 3171.00 Rupees Three Thousand One

Hundred Seventy One Only

215 Supplying and erecting KITKAT pattern porcelain cutout with 3.00 Each 416.00 Rupees Four Hundred Sixteen

base of following current capacity erected on existing block board. Only

216 Approved make Earth fault Relay suitable to mount with inter 1.00 Each 4641.00 Rupees Four Thousand Six

connection to moulded case circuit breaker having CT ratio & Hundred Forty One Only

MCCB rating as following along with shunt trip 220 V AC with all

internal connections & complete erected in existing M.S.housing. 1)

15 A - 100 A, CT Ratio 1/100 [make and model approved by EIC

strictly as per tender specification]

217 Supplying and erecting approved make panel mounting type Digital 2.00 Each 1263.00 Rupees One Thousand Two

Voltmeter having 3 x 1/2 digits LED display, 0 to 750 AC Volts Hundred Sixty Three Only

range having 0.5 class accuracy, erected on existing panel board

with all connection, wiring etc. with manufacturers calibration

certificate. [Make and model approved by EIC as per specification]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

218 Supplying and erecting approved make panel mounting type 2.00 Each 1543.00 Rupees One Thousand Five

Digital Ammeter having 3 digits LED display, external CT operated, Hundred Forty Three Only

calibrated for 0 to 1000 Amps. suitable to operate on 500 Volt AC,

0.5 class accuracy,erected on existing panel board with all

connection, wiring etc. with manufacturers calibration certificate.

[Make and model approved by EIC as per specification]

219 Supplying and erecting Ammeter / Voltmeter selector switch for 3 4.00 Each 314.00 Rupees Three Hundred

phase AC Supply 500 V on existing panel board with necessary Fourteen Only

connections. [Make and model approved by EIC as per

220 Supplying and erecting approved make set of indicator lamps of 6.00 Each 43.00 Rupees Forty Three Only

LED type lamp, lense cover, Bakelite holder complete erected with

necessary connections. [Make and model approved by EIC as per

221 Providing and Erecting of Miniature circuit breaker single pole 6 8.00 Each 111.00 Rupees One Hundred Eleven

Amp. to 25 Amp. suitable to operate on 240 V A.C. system and Only

having breaking capacity 10 KA to be erected in existing MS box

confirming to IS 8828/1996 with ISI Mark.

222 Providing & erecting L.T. Current Transformer with bar primary 8.00 Each 272.00 Rupees Two Hundred Seventy

50/5 to 1000/5 ratio 15 VA burden having 0.5 class accuracy Two Only

erected in Class existing CRCA box duly secured with insulating

materials connected to the meter [Make and model approved by

EIC as per specification]

223 Providing & erecting 240 V MCB Double pole switch for Motor and 13.00 Each 327.00 Rupees Three Hundred Twenty

inductive load (C curve) having 10 KA breaking capacity & confirms Seven Only

to IS:8828 in Existing M.S. box having following capacity. For

224 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 4.00 Each 730.00 Rupees Seven Hundred Thirty

Load (C Curve) having 10KA breaking capacity & confirms to Only

IS:8828 in existing MS box having following capacity. For 63 Amp.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

225 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 1.00 Each 662.00 Rupees Six Hundred Sixty Two

Load (C Curve) having 10KA breaking capacity & confirms to Only

IS:8828 in existing MS box having following capacity. For 40 Amp.

226 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 1.00 Each 590.00 Rupees Five Hundred Ninety

Load (C Curve) having 10KA breaking capacity & confirms to Only

IS:8828 in existing MS box having following capacity. For 25 Amp.

227 Providing and Erecting Approved make ISI mark ELCB confirming 1.00 Each 2213.00 Rupees Two Thousand Two

to IS:12640/1988 having serial number printed on it and having Hundred Thirteen Only

sensitivity of 30 mA and breaking capacity of 10 KA and suitable for

240 V, 50 Hz having characteristic of quick acting & Tripping with all

advance feature & do not incorporate any electronic component

(mounted in MCBDB) Suitable for operation on single phase

Volt max rating of (i) For 40 Amp. DP.

228 Providing and Erecting of Approved make ELCBs / RCCBs 1.00 Each 2986.00 Rupees Two Thousand Nine

conforming to IS: 12640 and having sensitivity of 30 mA and Short Hundred Eighty Six Only

Circuit withstand capacity of 6 KA and suitable for operation on

phase and neutral 415 V having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed with same

company metal box with earthing terminal with necessary

numbering with oil paint by painter. (iv) 25 Amp. FP.

229[a] Supplying & fixing box for housing RCCB + MCB combination 2.00 Each 272.00 Rupees Two Hundred Seventy

made of 18 SWG sheet steel duly powder coated with gasket, dust Two Only

& vermin proof bakelite shield two earthing terminals for following

type of RCCB, RCCB + MCB [a] For 2 pole [Same company

metal box used as MCB / ELCB used with earthing terminal

with necessary Numbering / marking with oil Paint by painter]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

229[b] For 4 pole [Same company metal box used as MCB / ELCB 4.00 Each 442.00 Rupees Four Hundred Forty Two

used with earthing terminal with necessary Numbering / Only

marking with oil Paint by painter]

230 Supply, Installation, Testing & Commissioning of Three Phase, 440 1.00 Each 6319.00 Rupees Six Thousand Three

V Surge Suppressor protection Device (SPD) & 40 Amp TPN Hundred Nineteen Only

MCB (or As per SPD OEM guide line for the protection of SPD

which is erected such a way that it can be operated easily) SPD

must be capable to protect all electrical and electronics equipments

if SPD blast or fuse then the panel builder must have replace it soon

during defect liability period.The Detail Specification of SPD are As

per Attached sheet with Annexture -A(E). (Hakel, Iskira, Obo make)

(With Three year Gaurantee / warranty)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

231 Providing ad erecting approved make single phase Double Door 3.00 Each 5868.00 Rupees Five Thousand Eight

metal clad D.B. as per relevant indian standards ammended upto Hundred Sixty Eight Only

Supplying and fixing following way single phase MCB distrubution

board of company fabricated sheet box with powder coated inside

and outside after apply seven tank chemical process of CRCA

sheet cover complete with suitable integral single piece construction

tinned copper busbar and link with all necessary interconnection

and with necessary size MS frame for mounting MCBDB. MCBDB

Door, Back side and Body of MCBDB must be made of 1.2 mm

thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as

per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass

make neutral & Earthing link with isolation & Protecting Cover for

240 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned copper

neutral link, tinned copper earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

Single phase incoming and horizontal single phase outgoing. For

Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB

(ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), 1 no. MCB 40 Amp. double pole switch

(C curve confirms to IS:8828 having breaking capacity of 10 KA)

and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on

240 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. & 25 Amp:

(The DBs should be used of same company of MCB / ELCB to be

used) (MCBDB must be erected in line & level with spirit level and

finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site.

Font / number size given by EIC on site as per requirement]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

232 Providing ad erecting approved make single phase Double Door 1.00 Each 5202.00 Rupees Five Thousand Two

metal clad D.B. as per relevant indian standards ammended upto Hundred Two Only

Supplying and fixing following way single phase MCB distrubution

board of company fabricated sheet box with powder coated inside

and outside after apply seven tank chemical process of CRCA

sheet cover complete with suitable integral single piece construction

tinned copper busbar and link with all necessary interconnection

and with necessary size MS frame for mounting MCBDB. MCBDB

Door, Back side and Body of MCBDB must be made of 1.2 mm

thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as

per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass

make neutral & Earthing link with isolation & Protecting Cover for

240 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned copper

neutral link, tinned copper earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

Single phase incoming and horizontal single phase outgoing. For

Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB

(ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), 1 no. MCB 40 Amp. double pole switch

(C curve confirms to IS:8828 having breaking capacity of 10 KA)

and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on

240 Volt A.C. power. (6 Amp:- 3 Nos., 16 Amp:- 3 Nos. & 25 Amp:

(The DBs should be used of same company of MCB / ELCB to be

used) (MCBDB must be erected in line & level with spirit level and

finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site.

Font / number size given by EIC on site as per requirement]

233 Supplying & erecting 12 mm thick backelite sheet of approved 2.00 Sq. Mtr. 2289.00 Rupees Two Thousand Two

make and grade on 25 x 25 x 3 mm red oxide painted angle iron Hundred Eighty Nine Only

frame suitable for fixing ICDP SWITCH and energy meter

(contractor shall make approved drawing of Bakelite sheet To

arrange required No. of Energy meter & ICDP switch-busbar etc. as

per Actual space available in electrical room at site)

234 Providing and erecting Steel cover as per drawing using 18 SWG 3.00 Sq. Mtr. 2976.00 Rupees Two Thousand Nine

M.S.sheet of following depth, to house the switchgear etc. complete Hundred Seventy Six Only

with locking arrangement and lock with duplicate keys per cupboard

and door handles erected with necessary support and painting.

Without angle iron frame. For 40 cms. depth

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

235 Providing, erecting, fabricating the M.S. structure as per 100.00 Kg. 75.11 Rupees Seventy Five And Paise

requirement of site as per structure design Including proper size Eleven Only

approved by EIC of M.S. angles, flats, bars, square pipe, channels,

sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac

make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering

and finishing complete. All hole opening of square pipe end must be

closed with M.S plate welding. Payment will be done on KG as per

236 Providing and erecting metalic danger notice board for MEDIUM 3.00 Each 69.00 Rupees Sixty Nine Only

VOLTAGE installation to be erected as per I.S.

237[a] Supplying and erecting approved make GRP/FRP Perforated type 30.00 Rn. Mtr. 526.00 Rupees Five Hundred Twenty

Cable Tray Material – Corrosion Resistant Polyester Flame Six Only

Retardant U.V. Stabilized Resin System - Manufactured from

Pultruded Sections- Polyester Resin System, Glass Content : 55 –

60 % - - Standard Length : 3000 mm- Support Span – 1500 mm,

Deflection L/200 - Specification NEMA FG1 1993- UV Resistant -

Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low

Flammability - Specification Followed NEMA FG1 1993 Oxygen

Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent

of Burning) – 20 mm as per Standard ASTM D 635 - Tensile

Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 -

Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D

790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D

256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard

ASTM D 695- Barcol Hardness – 50 – 65. Width 300 mm, Side

Member “C” Section : 100 x 35 x 35mm with 4mm Thickness,

Loading 60Kg./Mtr. With Concentrated Load 70Kg. at center of

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

237[b] Width 150 mm, Side Member “C” Section : 75 x 25 x 25mm with 50.00 Rn. Mtr. 230.00 Rupees Two Hundred Thirty

4mm Thickness, Loading 30Kg./Mtr. With Concentrated Load 70Kg. Only

at center of the span.

238[a] Supplying and laying UPVC cable trunking system comprising 50.00 Mtr. 275.00 Rupees Two Hundred Seventy

unplasticised polyvinyl, chloride rigid material with ignition free & Five Only

flame proof confirming BS .All necessary accessories and

measuring of following sizes. [1] 75 mm x 50 mm trunking.[MK,

LEGRAND, OBBO make Only]

238[b] 100 mm x 50 mm trunking .[MK, LEGRAND, OBBO make Only] 50.00 Mtr. 424.00 Rupees Four Hundred Twenty

239 Supplying and fixing radium sticker or Painting the number and 1234.00 Each 2.00 Rupees Two Only

words for inventory Identification on erected fittings / equipment‟s or

Such accessories (MCBDB, Panel, Pole, Rack, Earthing, Pump,

Door etc.) as may required with good quality of enamelled paint or

fade proof, weather proof, waterproof high quality vinyl radium

sticker for indoor/ outdoor application as directed by engineer in

charge. For one character 50 mm height.

(The colour of sticker / paint should be as per instruction given by

EIC as per site

240 Providing and erecting 2 mm Aluminium / 4mm ACP sheeting 15.00 Sq. Mtr. 3955.08 Rupees Three Thousand Nine

fixed with Type-4 Class-B High Intensity Grade Sheeting as per IRC Hundred Fifty Five And Paise

67 : 2012 reflective sheeting of size including lettering and signs as Eight Only

241 Providing & erecting Switch board for Computer or electric 18.00 Each 1122.00 Rupees One Thousand One

apparatus consisting of following items in single board erected on Hundred Twenty Two Only

Metal board with 3 mm thick PC (Polycarbonet) / Acrylic sheet

erected as directed. 2 no. 6/16 Amp. universal Socket, 2 nos.

Amp. indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp.

pin Plug. For Computer power Supply board.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

242 Providing and erecting modular type accessories mounted on 2.00 Each 629.00 Rupees Six Hundred Twenty

20G G.I. company fabricated galvanised metal box covered with Nine Only

approriate front plate modules erected flushed with wall/Ceiling with

1 Nos. of 16 Amp SP indicator Switch & 3 Nos. of 6 Amp 3/5 pin

plug. [For TV Switch board]

243 SITC of specified make X color for Cat.-6 Data and Y color for 825.00 Mtr. 47.00 Rupees Forty Seven Only

Cat.-6 voice cable to be done in prelaid PVC pipe / raceway, but

without the cost of raceway or pipe (the wire is to be drawn from

MFD/ JB to outlet point) (a) CAT - 6 (For Computer Cabling and

For Voice Cabeling)(Molex, R&M, Avaya,Systimax,Legrand make

244 SITC of 24 x 10/100/1000BASE-T ports 4 x Gigabit RJ45/SFP 1.00 Each 15247.00 Rupees Fifteen Thousand Two

Combo ports Advanced L2 switching and security features Hundred Forty Seven Only

L2+ Static Routing Optional “standard mode” or “surveillance mode”

management user interface. 24 Port. ([HP, Cisco, Juniper &

model approved by EIC)

245[a] Providing and erecting following type of Modular Type Accessories 2.00 Each 159.00 Rupees One Hundred Fifty Nine

mounted with 20 G G.I. company fabricated metalic box, single Only

mounting base frame covered with textured / metallic front plate,

modules erected with necessary connection. As desired by

Engineer in charge. TV Co-axial Socket outlet. Cat.-III

245[b] Blank plate single, CAT-III 100.00 Each 25.00 Rupees Twenty Five Only

246 Providing & Erecting following size of TV Co-axial flexible cable 100.00 Mtr. 39.00 Rupees Thirty Nine Only

comprising inner conductor of solid bare copper insulated with

Foam PE & Secondary conductor made of poly - Aluminium film

bonded Al. Braids @ suitable coverage overall sheathed with black

PVC insulation. (FINOLEX / POLYCAB / RRKABEL) [b] RG-6

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

247 Providing & erecting following type of Modular Type Accessories 18.00 Each 159.00 Rupees One Hundred Fifty Nine

mounted with 20 G G.I. Company Fabricated metalic box, single Only

mounting base frame covered with textured / metallic front plate,

modules erected with necessary connection. As desired by

Engineer in charge. Modem Jack for Computer Open RJ-45 CAT-

248 Providing & erecting following type of Modular Type Accessories 12.00 Each 159.00 Rupees One Hundred Fifty Nine

mounted with 20 G G.I. Company Fabricated metalic box, single Only

mounting base frame covered with textured / metallic front plate,

modules erected with necessary connection. As desired by

Engineer in charge. (a) RJ-11Telephone Socket CAT-III

249 SITC of Cat 6 Jack Panel, fully loaded with 24 nos. UTP ports for 1.00 Each 4357.00 Rupees Four Thousand Three

PCB based IO Jacks (RJ45, TIA-568C Category-6, Installation and Hundred Fifty Seven Only

Termination of all 24 nos. Catergory-6 UTP , unloaded with

individually replaceable 24 nos. Category-6 I/O Jacks complying

with TIA-568.C.2, as per given jack specification Shall be suitable

for loading unshielded & shielded jacks for different category

systems (CAT 6)

250 Supply and installation of 9U steel rack for installing 4 nos. 1.00 Each 11441.00 Rupees Eleven Thousand Four

Ethernate switches/Hubs. The Rack should be fully enclosed steel Hundred Forty One Only

housing fabricated with 14 SWG sheet and powder coated with

glass doors and having wire management systems. The rate

includes the Exhaust Fan, 2 nos. 4 socket and 1 switch power strip

and all the wiring in the rack. (Rittal, Valrack, APC, Legrand make

251 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag 18.00 Each 155.00 Rupees One Hundred Fifty Five

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer] [Make and model approved by EIC as per

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

252 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag 18.00 Each 199.00 Rupees One Hundred Ninety

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer] [Make and model approved by EIC as per

253 Termination and Testing of CAT 6 data socket I/o as per 40.00 Each 68.00 Rupees Sixty Eight Only

industries with ferruling for Pyrotech table,including cost of Site Visit

for Work and Service up to defect laibility period.

254 Termination and Testing of RJ 11 Telephone socket as per 25.00 Each 42.00 Rupees Forty Two Only

industries with ferruling for Pyrotech table,including cost of Site Visit

for Work and Service up to defect laibility period.

255 Supplying & erecting approved make Telephone Cable electrolytic 100.00 Mtr. 198.00 Rupees One Hundred Ninety

copper conductor PE insulation twisted in two pairs, & wrapped with Eight Only

FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of pairs. With

necessary connections. Conductor Size 0.5 mm (b) Armoured

[Jelly Filled] (2) Twenty Pairs

256 Providing & erecting main Distribution (MDF) indoor type, back 1.00 Each 1355.00 Rupees One Thousand Three

mounted FRLSame [b] Suitable for 20 pair [Make and model Hundred Fifty Five Only

approved by EIC as per specification]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

257 Supplying and erecting approved make Octagonal pole made 3.00 Each 6917.00 Rupees Six Thousand Nine

from HR sheet steel. The pole should be made as per IS. and shall Hundred Seventeen Only

be coated with hot dip galvanizing as per IS 2629/2633 /4759,

suitable suspend local wind speed with integral Junction box with

Hot Deep Galvanised door having 2 nos. 180° operated hinges

& 2 nos. Ln key locking with silicon rubber gasket. Consist of

terminal plate of min 6mm Hylam sheet, standard profile 35 mm

X 7.5 mm Din-Rail & MCB, Brass stud type terminal and

arrangement for cable termination to be erected on RCC

foundation as per details given by manufacturer and EIC

considering site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of steel

rainforcement of RCC FE 415, (3) Clear cover to rainforcement

50mm, (4) Concrete vibrated, (5) use suttering / farma, (6) Hot deep

galvanized average 70 Micron, (7) Detail drawing will be given by

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

with 200 mm X 200 mm X 12 mm base plate, 4-M16 Bolts and

mm long hot deep galvanized J-Bolt, nuts, washers with 800 mm

under ground and 200 mm above ground level and Foundation in

1:2:4 proportion as per details given by manufacturer and EIC

considering site requirement. Approx Pole weight 46 kg..(Make:-

Bajaj, Valmont, Transrail, Ambica Only) (Test certificate to be

258 Providing and making Coil type earthing, coil made from 8 SWG 3.00 Each 368.66 Rupees Three Hundred Sixty

galvanised iron wire with 50 mm OD and 50 turns (length of turns Eight And Paise Sixty Six Only

approx. 200 mm) and having additional continuous streight length of

3.00 mtr at open end and should be connected to earthing bolt and

burried in 1.5 mtr deep specially prepared earth pit complete with

salt and charcoal/coke as required for coil type earthing.(Approx

weight of coil 1.0 to 1.1 Kgs)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

259 Supplying and erecting Fabricating terminal box for street light 8.00 Each 702.00 Rupees Seven Hundred Two

pole made from 16 SWG M.S. sheet having following size Only

complete with fixing arrangement for terminal board, with necessary

hole for wire entry and exit from the box. The box shall be provided

with cover and hinges on one side and bolting at other end The box

shall be fixed by clamps fabricated from 25mm x 6mm flat.The box

shall be painted with one coat of red oxide and two coats of paint

having following box size 330 mm x 260 mm x 140 mm (depth).

Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit

with suitable brass studs with nuts, washers and clamps of size

mm x 3 mm suitable for pole painted with one coat of red lead paint.

260 Providing & erecting bracket consisting of ISI mark "B" class G.I. 3.00 Each 487.00 Rupees Four Hundred Eighty

Pipe 4.2 cm outside diameter complete with suitable G.I. Sleeve Seven Only

tubing of 2 mm. thick and required size and length suitable for 76.5 /

80 mm. required size of pole top or pipe in pipe surface for terrace

as per instruction of EIC or wall bracket as per instruction of EIC

having nuts and bolts for fixing the brackets and having spread of

Upto 0.70 mtr. length with suitable rise as per site condition and

suitable welded stiffner reducer and nipple with check nut complete

painted with one coat of yellow zinc and two coats of alluminium

paint for Single arm bracket suitable for pole or terrace as per

design given by EIC (a) For single arm bracket. (Jindal / Asian /

Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont,

Transrail, Ambica Only) (Test certificate to be submitted)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

261 For Wall & Terrace Street light Bracket: 8.00 Each 487.00 Rupees Four Hundred Eighty

Providing and Fixing of wall and terrace bracket consisting of ISI Seven Only

mark "B" class G.I. Pipe 4.2 cm outside diameter and length

suitable for building face for fixing the brackets and having spread

of Upto 0.70 mtr. length with suitable degree angle as per site

situation suggested by EIC. vertical plane and suitable welded

stiffner reducer and nipple with check nut complete painted with one

coat of red oxide and two coats of alluminium paint (Zinc Coating

before alluminium Paint is mandatory)with . complete with

150*150*2mm thick G.I plate with 4no heavy duty galvanized jasti

khila of required size or Single arm bracket (pipe in pipe type)

suitable for terrace as per design given by EIC Considering parfait,

height ,width and total height of building and type of led fitting. (a)

For single arm bracket

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

262 Providing and Fixing SITC of Outdoor aesthetically designed LED 3.00 Each 3512.00 Rupees Three Thousand Five

Street Light Luminaire with total consumption of Max. 45 W with Hundred Twelve Only

single piece die cast aluminium housing, high power LED shall be

mounted on high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with

polycarbonate / thoughened glass cover the fixture should be

suitable for pole/bracket mounting. The fixture to comply both LM79

and LM 80 guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution.The Watt Capacity

of each LED must be >= 4 Watt.(In Street Light Fitting). The Fixture

Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against high and low

Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F >

0.95. Also the Fixture should meet the following technical criterias

Oprating range Voltage 160 to 270 V, system efficiency >=

lm/w, and total lumens not less then 4950, CCT > 5000K, CRI >

beam angle 120 deg, surge immunity level at least 4 KV integral

and 10 KV non integral.

The Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once

the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs

free replcement Guarantee for complete Fixture)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

263 Providing and Fixing SITC of Outdoor aesthetically designed LED 8.00 Each 6117.00 Rupees Six Thousand One

Street Light Luminaire with total consumption of Max. 90 W with Hundred Seventeen Only

single piece die cast aluminium housing, high power LED shall be

mounted on high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with

polycarbonate / thoughened glass cover the fixture should be

suitable for pole/bracket mounting. The fixture to comply both LM79

and LM 80 guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution.The Watt Capacity

of each LED must be >= 4 Watt.(In Street Light Fitting).The Fixture

Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against high and low

Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F >

0.95. Also the Fixture should meet the following technical criterias

Oprating range Voltage 160 to 270 V, system efficiency >=

lm/w, and total lumens not less then 9900, CCT > 5000K, CRI >

beam angle 120 deg, surge immunity level at least 4 KV integral

and 10 KV non integral.

The Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once

the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs

free replcement Guarantee for complete Fixture)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

264 SITC of Outdoor aesthetically designed LED Flood Light Luminaire 2.00 Each 6228.00 Rupees Six Thousand Two

with total consumption of maximum 90 W with single piece die cast Hundred Twenty Eight Only

aluminium housing, LED's mounted on high quality metal core

based PCB with extremely precison designed heat sink, complete

with IP66 protection Class, with polycarbonate / Toughened glass

cover. The fixture should be suitable for pole/bracket mounting. The

fixture to comply both LM79 and LM 80 guidelines with LED

minimum 110 lumen/watt with L70 at 50,000 hrs, provided with high

quality polycarbonate Seperate lenses for better light

distribution.The Watt Capacity of each LED must be >= 4 Watt.(In

Street Light Fitting).The Fixture Should be able to be Pole Mounted

and also bracket mounted, provided with high quality potted driver

for protection against, high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver should

be less than 10% and P.F > 0.95. Also the Fixture should meet the

following technical criterias. Operating range Voltage 160 to 270 V,

system efficiency > 110 lm/w, CCT > 5000K, CRI >65, beam angle

120 deg, 4kV integral & non integral surge immunity level at least

KV non integral... Flood Light lumens shall be more than

(Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5yrs free replcement Guarantee for

complete Fixture)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

265 supplying & erecting 40W LED POST TOP LATTERN fitting with 2.00 Each 4772.00 Rupees Four Thousand Seven

high power white LEDs wattage of 1 ww and above assebled on Hundred Seventy Two Only

single MCPCB's effiency more than 130 lumens per watt and

corrosion free high pressure diecast alluminium housing with

smooth finish powder caoted and heat sink extruded alluminium

with difuser and poly carbonate optics/ lences with compny mark /

name /engraved or embossed 120 to 300 volt, power factor more

than 0.95, THD < 10%, CCT 5000K to 5700K , Uniformity ratio >

0.45, Luminure efficency Min 110 lumens per watt. LED Driver

efficency > 85%. Cree/osram/philips Lumileds/Nichia /Seoul/Bridge

Lux (USA) make LED used for luminare ( Each Fitting required LM

79 and LM-80 certificates)

(E)Post Top Latern LED Fitting Comprises of 650 MM TOP

diameter 120 degree beam angle with 3 Nos supporting ribs

proposed for garden & Promenade. maximum 40 watt. (Note:-

The manufacturer/authorized Channel partner of the manufacturer

has to submit 5 yrs free replcement Guarantee for complete Fixture)

266 SITC LED Bollard fittings of minimum height 600 mm & dia.100mm 2.00 Each 3370.00 Rupees Three Thousand Three

having polycarbonate clear/milky diffuser mounted on 3mm thick Hundred Seventy Only

aluminium finished powder coated pipe with base plate 160x160mm

with erection by M8x75mm fastner with required RCC

foundation.IP65 for 15 watt, surge- 4 kv- cat-III [Provision in

estimate for garden]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

267 Supplying and erecting LED street light / Flood light fittings with 4.00 Each 1384.00 Rupees One Thousand Three

High power White LEDs wattage of 3 Watt and above assembled Hundred Eighty Four Only

on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) For

Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection 10 to

Watts [Provision for compound wall light]

268 Supplying & Erecting following size of Light duty “A” Class G.I. 50.00 Mtr. 171.00 Rupees One Hundred Seventy

Pipe & erecting as directed by Engineer-in-charge. For 25 mm dia. One Only

269 Providing & Erecting Flexible PVC insulated multistrand 100.00 Mtr. 46.00 Rupees Forty Six Only

multicore 1.1 kv grade ISI marked copper wires of following size

to be erected as directed. 3 core 1.5 sq.mm. PVC insulated round

copper wire ISI mark.

270 Providing & Erecting Flexible PVC insulated multistrand 50.00 Mtr. 77.00 Rupees Seventy Seven Only

multicore 1.1 kv grade ISI marked copper wires of following size

to be erected as directed. 3 core 2.5 sq.mm. PVC insulated round

copper wire ISI mark.

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

271 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 300.00 Mtr. 361.00 Rupees Three Hundred Sixty

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be One Only

laid on wall with suitable G.I. heavy guage 1.0 mm thick cable clamp

or in existing DWC pipe underground or road crossing or floor of

following size of cables. [a-1] For 4 core x 4 sq.mm.

272 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable 160.00 Mtr. 152.00 Rupees One Hundred Fifty Two

multistrand Aluminium conductor for 1.1 KV. to be laid 90 cms. Only

Under ground or to be laid on wall with suitable G.I. heavy guage

1.0 mm thick cable clamp or in existing DWC pipe underground or

road crossing or floor of following size of cables. [d] 4 core x 16 Sq.

273 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable 100.00 Mtr. 282.00 Rupees Two Hundred Eighty

multistrand Aluminium conductor for 1.1 KV. to be laid 90 cms. Two Only

Under ground or to be laid on wall with suitable G.I. heavy guage

1.0 mm thick cable clamp or in existing DWC pipe underground or

road crossing or floor of following size of cables.. 3*1/2 core x

Sq. mm (35 Sq. mm 1/2 core)

274 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable 30.00 Mtr. 486.00 Rupees Four Hundred Eighty Six

multistrand Aluminium conductor for 1.1 KV. to be laid 90 cms. Only

Under ground or to be laid on wall with suitable G.I. heavy guage

1.0 mm thick cable clamp or in existing DWC pipe underground or

road crossing or floor of following size of cables. 3&1/2 core x

Sq. mm (50 Sq. mm x 1/2 core)

275[a] Providing & fixing double compressed heavy duty flange type 60.00 Each 43.00 Rupees Forty Three Only

brass cable gland with rubber ring for P V C insulated armoured

cable complete with outgoing tails, insulating tape etc. For following

size cables. For 2 to 4 core x 2.5/4.0 Sq. mm (Sigma, MCI, Comet

275[b] For 4 core*16 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 57.00 Rupees Fifty Seven Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

276[a] Providing and, fixing heavy duty flange type brass double 4.00 Each 66.00 Rupees Sixty Six Only

compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for

following size of cables.(A) 3 core 35/50 Sq. Mm

276[b] (C) 3 core 95 Sq. mm 2.00 Each 134.00 Rupees One Hundred Thirty

277[a] Providing & laying HDPE Double walled corrugated pipes (DWC) 200.00 Mtr. 117.00 Rupees One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load Seventeen Only

required of 450N capacity with anti rodent and ultra violet material

properties with necessary connecting accessories of same

material at required depth to be laid 90 cms. under ground for

laying of cable below ground / road surface for enclosing cable and

back filling the same to make ground as per original. (A) For Outer

dia. 50 mm and Inner dia. 38 mm. (Test Certificate to be

277[b] For 90 mm dia. 30.00 Mtr. 150.00 Rupees One Hundred Fifty Only

278 Providing & fixing Solderless crimping type Copper lugs 516.00 Each 8.00 Rupees Eight Only

conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5

279[a] Providing & fixing Solderless crimping type Aluminium lugs 20.00 Each 15.00 Rupees Fifteen Only

conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [c] 16/25

279[b] For 35/50 Sq.mm. 30.00 Each 20.00 Rupees Twenty Only

279[c] For 95 Sq.mm. 12.00 Each 40.00 Rupees Forty Only

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

280 Providing and Laying of Mains with ISI marked, 1.1 KV grade 70.00 Mtr. 56.00 Rupees Fifty Six Only

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. [f] One wire 6.00 sq.

281 Providing and Laying of Mains with ISI marked, 1.1 KV grade 50.00 Mtr. 91.00 Rupees Ninety One Only

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. [f] One wire

282 Providing and Laying of Mains with ISI marked, 1.1 KV grade 160.00 Mtr. 141.00 Rupees One Hundred Forty One

electrolyte multi stranded, annealed copper conductor with heat Only

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. [g] One wire

283 Providing and Laying of Mains with ISI marked, 1.1 KV grade 30.00 Mtr. 234.00 Rupees Two Hundred Thirty

electrolyte multi stranded, annealed copper conductor with heat Four Only

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. For One wire

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

284 Providing and laying Mains with ISI marked, 1.1 KV grade 300.00 Mtr. 17.00 Rupees Seventeen Only

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. For One wire

285 Supplying and erecting Servo Controlled Voltage Stabilizer 1.00 Each 66413.00 Rupees Sixty Six Thousand Four

(SCVS) as per following requirement: (1) Input Voltage Range - Hundred Thirteen Only

Three Phase 340 To 480 Volt AC. (2) Out put Volatge - Three

Phase 415 Volt AC (Line - Line) with Voltage Regulation of +/- 1%.

(3) Frequency range - 47 Hz To 63 Hz. (4) Efficiency - More or

equal to 98%. (5) Type of Stabilizer - Suitable for Balance &

Unbalance Load and Voltage including SPD (6) Controlled Type -

Digital Micro Controller Based Disply. (7) Rate Of Correction - Upto

100 Volt / Sec (Line - Line) (8) Servo Motor Drive - AC Syncronous

Stepper Motor - As per KVA Capacity, Out put volatge and Voltage

regulation requirement. (9) Nil Wave form Distortion and Effect of

Load Power. (10) Responce Time - 10 milli second. (11) Protection

requirements - Input low Cut off protection / Input High Cut Off

Protection / Output Low Cut Off protection / IOutput High

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

(12) Fault Annuciation Panel LED shows Input present, Input high

Input low, Output Normal, Output High, Outpur low, Overload. (13)

Output On time delay - 10 seconds (14) Ambient Tempeature

capacity - 0 - 45 RH upto 90 %. (15) Enclosure Type - IP20 (16)

Type of Cooling - Air, Output: Bypass switch with changeover switch

& 5 year free replacement guarantee on stamp paper.Loading and

unloading of above item shall be done by hydra and skill work force

under supervision of electrical engineer and guidelines given by

manufacturer to avoid damage to the item.Picture of it to be

submitted in running bill/ final bill.Size of door and Ele.room/Pump

Room shall be checked by agency's engineer before giving order.if

found any problem in size discuss with GSPHCL engineer for

recitfication before giving order. 20 KVA (Make- Servomax,

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

286 Providing, erecting, testing and commissioning insu intelligent 1.00 Each 20255.00 Rupees Twenty Thousand Two

street light controller specially designed for energy saving in Hundred Fifty Five Only

conventional street light system (Cat. No. SLC-03-1 ph-15 KVA-20

Amp. per phase) having technical specification, 1 phase, 2 wire,

230 V AC/ph, +/- 25% R Y B N 2 wire supply system, 50 Hz (+/-

10%) 2 W (Stand BY) to 4 W (at street light operation) consumption,

Advance 8 bit micro controller, switching on longitude and latitude

base, accuracy of +/- 1 minute per month, with in built battery, with

battery life of more than 8 years, with special device which hold the

parameter for more than 10 year without any power and password

protected. 16 characters and two line LCD display with backlight,

keys user friendly keyboard system, 7500/15000 VA feeder pillar

capacity, 63/100 Amps isolator, 3 output with termination, 40/63

Amps 2/3 pole contactor, 3 X 16 Amp., with FR cable provision to by

pass by way of relay operation through auto/manual switch, 2 to

centigrade and humidity 90 % non condensing, Out door type

installation on pole with clamps (Provided with clamps and nut bolt)

or wall or floor, Three locking system flush type internal panel lock,

external pad lock and internal U clamp locking systems for against

theft of Panel, having 25 Kg weight, 16 Gauge MS weather proof

box with industrial exterior powder coated with 7 tank process RAL

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

287 Providing & Erecting open well type horizontal submersible 2.00 Each 9518.00 Rupees Nine Thousand Five

mono block pump set with cast iron body having following Hundred Eighteen Only

specification [E] For 1 phase open well horizontal mono block

pump set suitable for 185 LPM discharge at required head as per

plumbing length and vertical & Horizontal head.Agency has to

submit the details calculation of head to GSPHCL and get approval

of make and model of pump having tender specification with TDS &

GA drawings.Suitable for 32 mm dia. delivery pipe with 10 mtr

necessary Size 3 Core Flat copper flexible cable. (Body : Cast iron /

Winding : Copper / stator : Copper / rotor : Copper / shaft : SS

material test certificate from manufacture shall be submitted).

The model of the pump with respect to head and discharge will be

approved by EIC.

Pump should have following specification.

(1) Minimum 10mtr cu. flat cable of suitable size must be provided

(2) Pump shall be installed as per manufacturer foundation/ erection

drawing or as per IS specification.

(3) with necessary starter as per EIC

(Body: Cast iron / Winding : Copper / stator : Copper / rotor :

Copper / shaft : SS / Carbon material test certificate from

manufacture shall be submitted)

288 Lowering of existing submercible motor pump set complete with 2.00 Per Job 848.00 Rupees Eight Hundred Forty

required No. and size of pipes by means of proper chain pulley Eight Only

block and pipe wrenches. Job includes stacking of pipes

cronologically after the checking of threads. [d] For open well

horizontal submercible pump set for sump well. (i) 1 HP to 5 HP

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

289 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect 1.00 Each 232.00 Rupees Two Hundred Thirty Two

suitable kitkat fuse / MCB to be . erected on polished wooden Only

board inside the box with hinged/sliding door with rubber rings and

erected on pole with suitable pole clamp, all duly painted with one

coat of red oxide and two coats of paints. (Cost of Fuse / MCB shall

be taken extra) [Provision for motors cable joints near sump]

290 Providing water proof straight joint in PVC insulated flat flexible 2.00 Each 188.00 Rupees One Hundred Eighty

copper cable by using insulated material water proofing material Eight Only

and making the joint complete. UP to 10 Sq.mm

291 Supplying and erecting ISI maked C.I. Sluice valve at position with 2.00 Each 443.00 Rupees Four Hundred Forty

necessary material like flange, packing, nuts, washers etc. for Three Only

following size of pipe diameter. [d] 32 mm(1.5")

292 Supplying and erecting C.I. Swing check type non-return (reflux) 2.00 Each 311.61 Rupees Three Hundred Eleven

valve ISI marked with packing, flange, nuts and bolts etc.suitable And Paise Sixty One Only

for following pipe size. [a] For 32 mm dia.

293 Providing and erecting ISI marked PVC insulated PVC Sheathed 10.00 Mtr. 65.00 Rupees Sixty Five Only

Flat flexible Submersible copper cable approved make of

following Size. [c] 3 Core x 1.5 Sq. mm

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

294 Supplying, installation, testing and commissioning of electric 1.00 Each 33838.00 Rupees Thirty Three Thousand

driven booster terrace pump suitable for automatic operation and Eight Hundred Thirty Eight Only

consisting of following, complete in all respects, as required:

(a) Horizontal type, Single stage, end suction, closed coupled pump

of cast iron body & CI impeller with stainless steel shaft,

mechanical confirming to IS :

(b) 7.5 HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class

of protection for enclosure, horiziontal foot mounted type with Class-

'F' insulation, conforming to IS-325.

(c) M.S.fabricated common base plate,foundation bolts etc.as

(d) Suitable CC foundation duly plastered ( if required ) and anti

vibration pads.

[The all require Technical specification & Test Certificate shall be

submitted to Local fire Authority for approval] 450 LPM @ 35 m

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

295 Supplying & erecting approved make motor control cubical 1.00 Each 7646.00 Rupees Seven Thousand Six

panel (Direct-on- line) made from 16 G. CRCA sheet duly epoxy Hundred Forty Six Only

powder painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps for

R- Y - B phases, overload relay, Ammeter, Voltmeter each with two

way selector switch incoming, wires duly socket crimped, main

contactor & overload relay, start - stop push buttons, Auto manual

switch, NO/NC Contactor for pressure switch for Auto operation to

be erected on angle iron frame grouted on wall as directed. The

isolator, overload relay & contactors will be of L&T, Siemens or

BCH make only. [The Panel must be suitable for ON-OFF switch

contacts with suitable capacity in contactors and required

accessories in panel] (a) As per suitable size as per terrace

pump KW / HP rating and relay and contactor rating as per full

load current rating of Terrace pump

296 SITC of 4 Zone Fire Alarm Control Panel, with 16X2 Character 1.00 Each 19320.00 Rupees Nineteen Thousand

LCD Display, complies with UL - 864 and NFPA-72,Standards. Three Hundred Twenty Only

Approval: UL-Listed Optional: 1) Provision to connect zone wise

sounder (RE-25ZS) provided in a seperate cabinet.

2) Provision to connect zone wise relay (RE- 25ZC) provided in a

seperate Cabinet 3) provision to connect repeater Panel through

RS-485 with RE- RP Series. (Including Five year free maintenance

with guarantee) [RAVAL, GST, MOORLEY make and model

approved by EIC as per specification] [Test certificate must be

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

297 Providing and fixing of Dial type Pressure Gauge having 100 mm 1.00 Each 1539.00 Rupees One Thousand Five

dial & range of 0-14 Kg/cm2 with isolation ball valve. (Make:- Hguru, Hundred Thirty Nine Only

Fiebig or equivalent make and model approved by EIC as per

specification) (Test certificate must be submitted)

298 Providing & fixing of pressure switch in M.S. pipe line including 1.00 Each 1310.00 Rupees One Thousand Three

connection etc. as required. (Indfos, Danfoss or equivalent Hundred Ten Only

Approved ISI make & model approved by EIC)

299 Supplying and fixing air vessel (pressure vessel) made of 250 1.00 Each 15462.00 Rupees Fifteen Thousand Four

mm dia, 8 mm thick MS sheet, 1200 mm in height with air release Hundred Sixty Two Only

valve on top and flanged connection to riser, drain arrangement

with 25 mm dia gun metal wheel valve with required accessories,

pressure gauge and painting with synthetic enamel paint of

approved shade as required. (Approved ISI make & model

approved by EIC)

300 Supplying, installation, testing and commissioning of On/Off switch 2.00 Each 890.00 Rupees Eight Hundred Ninety

with all require. [ASES or equivalent make and model approved by Only

EIC as per specification) [Test certificate must be submitted]

301 SITC of ABS Manual Call Point with key – break / Re settable 2.00 Each 827.00 Rupees Eight Hundred Twenty

type. (Morley / GST/ Raval make and model approved by EIC as Seven Only

per specification) [Test certificate must be submitted]

302 SITC of ABS Sounder - 24V, 95-105 db APPROVAL: CE Mark 2.00 Each 827.00 Rupees Eight Hundred Twenty

(Morley / GST/ Raval make and model approved by EIC as per Seven Only

specification) [Test certificate must be submitted]

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

303 Providing and fixing of ABC Type Store Pressure Fire 8.00 Each 1991.00 Rupees One Thousand Nine

Extinguisher Having capacity 6 kg Filled with Mono Ammonium Hundred Ninety One Only

Phosphate Powder 50% confirms to IS 4308, Stored Pressure

Type, UGTS Pressure Gauge, Can Height 530 mm, Diameter

± 10mm, Discharge Time 24 Sec, Controllable discharge

mechanism, Jet Range 5 Meters, Average Discharge is 92%,

applicable on Class A,B & C and electrically started Fire, Fire

Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig

welded, EPDM(Ethylene Propylene Diene Monomer) Rubber

Hose with both end Aluminum clamped, Internal Coating - Epoxy

Powder coating, External Coating - Pure Polyester Powder

coating (UV Resistant), Brass forged CE Marked valves with

NRV & Auto Safety Release with safety Pin is of SS material,

Made up from 1.6mm thick sheet, Extinguishers confirmed to IS

15683:2018 and ISI marked. Referance Weight:-Gross Weight

Kg, Empty Weight 2.9 Kg, 1. Necessary certificate & and guarantee

must be attached, 2. OEM has to provide wall mounting heavy

duty bracket/clamp, screw, hardware for installation. 3.Following

printed marking Manufacturing Date and Expiry Date must be

mention on Extinguisher 4. Refilling period must be of 3 Years.

Following Printed marking on equipment must be required:- Model

No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial

no, Mfg Month, Refilling Due. [with necessary numbering / marking

with oil paint by painter as instructions given by G.S.P.H.C.L

engineer] (Make:KANEX, MINIMAX, CEASEFIRE)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

304 Providing and fixing of CO2 type High Pressure Portable 4.5 kg 8.00 Each 6526.00 Rupees Six Thousand Five

Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control Hundred Twenty Six Only

discharge mechanism fitted with 1 Meter Wire Braided Hose &

Electrical non-conductor Polyethylene Flat Horn with Diffuser

Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec,

Average Discharge is 95%, Applicable on Class B, C and

electrically started Fire, Fire Rating 55B, Internal coating is not

applicable & External coating is of enamel spray painting, Powder

Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2

Cylinder construction: hot spinning by seamless pipes & bearing ISI

mark, Body confirms to IS 7285 and PESO ( Petroleum and

Explosives Safety Organization) APPROVED, Minimum Wall

Thickness 4 to 4.2 mm, Extinguishers confirmed to IS 15683:2018

and ISI marked. Referance Weight:-Gross Weight 16.4, empty

weight 11.9 Kg, 1. Necessary certificate & and guarantee must be

attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed

marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 5 Years. Following

Printed marking on equipment must be required:- Model No,

Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no,

Mfg Month, Refilling Due. [with necessary numbering / marking with

oil paint by painter as instructions given by G.S.P.H.C.L engineer]

(Make: KANEX, MINIMAX, CEASEFIRE)

Sr. No. Description Qty Unit Estimated Amount Amount

Figure in Words

305 Providing and fixing of Automatic type 5 kg Fire Extinguishers 2.00 Each 5240.00 Rupees Five Thousand Two

Mono Ammonium Phosphate powder 50% Confirms to IS 4308, Hundred Forty Only

Applicable fire classes A,B & C, UGTS Pressure Gauge, Can

Height 370mm, Diameter 230 ± 10mm, Made up from 2 mm thick

sheet, Body Construction Deep Drawn with MIG Welding

technology, Brass forged sprinkler valves with Nozzle is specially

designed to give more than 99% discharge. Together with orifice

characteristic to cover adequately fire risks with scattering cone of

40 to 45° Angle. External Pure polyester (UV resistant) and Internal

Epoxy polyester powder coated, Heat Sensitive Glass bulb of 68 °C.

Area covered will be 2-2.5 m2 and volume of coverage is 7 m3.

Referance Weight:-Empty Weight 2.64 kg, Full weight 7.64 kg,