Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC HIMACHAL PRADESH HP | MANDI | HIMACHAL PRADESH | 176090 | L1 | Accepted-AOC AOC | |
| 2 | L2₹7.3 L+₹81,688.60 (12.6%)Rejected-Finance VPO PANOH TEHSIL DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | L2 | Rejected-Finance 2nd lowest bidder | |
| 3 | L3₹7.4 L+₹92,884.10 (14.3%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest bidder | |
| 4 | L4₹7.7 L+₹1.2 L (18.0%)Rejected-Finance ESD NO II UHL STAGE III BVPCL CHULLAH | LANGNA | MANDYA | KARNATAKA | 571401 | L4 | Rejected-Finance 4th lowest bidder | |
| 5 | L5₹7.9 L+₹1.4 L (22.3%)Rejected-Finance N A | L5 | Rejected-Finance 5th lowest bidder |
Tender Value
₹8.0 L
EMD Value
₹16,000
Closing Date
30 Sept 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPSIDC Shimla
Providing and laying roof structure
2024_SIDC_93206_1
Job No. 8
Open Tender
Civil Works
Item Rate
120 days
Bilaspur
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
₹16,000
16 Dec 2024
19 Sept 2024
1 Oct 2024
19 Sept 2024
30 Sept 2024
19 Sept 2024
Amount
P/F precaoted galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120gm per sqm as per IS:277,in 240mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns.Sheet should have protective guard film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer-In-Charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm)with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces excluding cost of purlins,rafters and trusses and i/c cutting to size and shape wherever required including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing ridges or hips of width 60cm overall width plain GS sheet fixed with polymer coated J or L hooks ,bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.63mm thick with zinc coating not less than 275gm/sqm including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of of approved steel primer using structural steel etc. as required in grating, framed, guard, bars ladders, railing, brackets, gates and similar works. In straingers, treads, landings etc. of stair cases, i/c use of chequered plate tegular wherever required all complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
GI metal ceiling lay in plain tegular edge global white colour tiles of size 595 x 595mm and 0.50mm thick with 8mm drop made of GI sheet having galvanising of 100gms/sqm (both sides inclusive) and electro statically polyster powder coated of thickness 60 microns (minimum)i/c factory painted after bending including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing and fixing on wall face unplsticised rigid PVC rain water pipes conforming to IS :13592 type A, including jointing with seal ring conforming to IS :5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes. (A) 110mm diameter
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing and fixing 15cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40 x 3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
SURESH KUMAR GOVT CONTRACTOR
ROOP THAKUR
Anil Kumar
Sanak Kumar Shukla
Chandan Singh Rathore
Tisha Mehta
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .