Construction of compound wall , carporch and camp office in b4 quarters

Amount

Felling trees of the girth (measured at a height of 1 m above ground level), Beyond 60 cm girth upto and including 120 cm girth including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) /manual means in over areas ( exceeding 30 cm in depth, 1.50m in width as well as 10 Sq.m on plan ) including disposal of excavated earth, lead upto 50m and lift upto 3.00m, disposed earth to be levelled and neatly dressed as per instruction of Engineer-in-charge.

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) grade excluding the cost of centering and shuttering - All work up to plinth level

Providing and laying in position cement concrete of grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level

Providing and laying in position reinforced cement concrete of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) grade, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level

Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams,slabs girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work with Thermo-Mechanically Treated bars of grade Fe-500D or more. including straightening, cutting, bending, placing in position and binding all complete above plinth level

Laterite masonary in cement mortar 1:6 (1 cement : 6 coarse sand) in foundation and plinth using neatly dressed laterite stones including cost and conveyance of all materials and labour charges etc, complete

Random rubble masonry with hard stone in cement mortar 1:6 (1 cement : 6 coarse sand) in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with

Providing and fixing 18mm or nearest thick mirror polished granite slab any colour and shade for display board/table top moulding and polishing to edges to give high gloss finish etc complete(Area of slab over 0.50 sqm) as per the design approved by the engineer-in-charge

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing and fixing aluminium tower bolts 200x10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium tower bolts 150x10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing 125 mm aluminium powder coated handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing Single aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and fixing bright finished 100 mm mortice lock with 6 levers heavy type of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and laying vitrified floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement/epoxy and matching pigments etc., complete.

Providing GI powder coated trafford sheets 0.50mm or nearest available thick with GI bolts and nuts plate washers and bitumin washers, M seal and 150mm overlap at ends including cost and conveyance of all materials and labour charges etc.complete

Providing 150mm or nearest available size PVC gutter with necessary clamps, bolts, nuts and specials such as nozzles sockets stoppers etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

Providing 200mm or nearest available size PVC gutter square type with necessary clamps, bolts, nuts and specials such as nozzles sockets stoppers etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

Plastering with C.M. 1:4 (one cement four sand), 12mm thick for walls inside and outside with necessary scaffolding and thread lines, including cost and conveyance of all materials and labour charges etc. complete.

Pointing (flush/ruled pointing) on stone work with cement mortar 1:3 (1 cement: 3 fine sand) including cost and conveyance of all materials and labour charges etc. complete.

Finishing walls with two or more coat Acrylic Smooth exterior paint of required shade in New work (applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing with Epoxy paint two or more coats on steel work at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with two coat premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre asper instruction of engineer in charge

Demolishing brick/laterite work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 sq. metres and below including stacking within 50 metres lead :

Dismantling steel work in channels, angles, tees and flats sections including dismembering and stacking within 50 metres lead in:

Dismantling roofing including ridges,G.S. Sheet, hips, valleys and gutters etc., and stacking the material within 50 metres lead

Fencing with G.I. barbed wire angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing 50mm PVC pipes (1-1/2")(10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 110mm (4") PVC pipe (4kg/cm2) and all specials best approved quality including jointing of pipes and fittings with necessary solvent cement trenching, refilling and testing of joints etc. complete as per the direction of Engineer-in charge

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for fixed portion of doors, windows ,sliding windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)(Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing 4 mm thick Aluminium Partition Panels, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

SHOUKATHALI U

Rahmathulla.K.K

SULFEEKHAR ALI NC

Biju M T

MUHAMMED SIRAJUDHEEN M