SR to Naktiguda to Tumberlla Road A such as PMC,SC,CD Maintenance,Signage and Berm filling at Ch-0/000 to 0/840 Km in Papdahandi Block for the year 2025 26

Road Portion Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area, with all labour, T&P, taxes & cess etc complete as per direction of Engineer-in-charge.

Providing, laying, spreading and compacting stone aggregate specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber the voids with small stones and hand packing the same to proper camber, applying and brooming requsite type of screening / binding materials filling up interstices of coarse agreegate, watering and compacting to the required density as per clause 404 of MoSRT&H specification for road and bridge work etc all complete including cost, conveyance, royalty and taxes of all materials with all labour and T & P etc complete. (WBM Grading-III)

Providing & applying primer coat with Bitumen emulsion on prepaired surface of granular base including cleaning the road surface and spraying primer @ 0.60kg / sqm using mechanical means as per clause 502 of MoSRT & H specification for road & bridge works etc complete as per direction of EIC.

Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder of 60/70 penetration grade of bitumen laid onprepared surface and rolling with 8-10 tonne smooth wheeled steel roller as per Clause 510 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing & applying tack coat with Bitumen emulsion using emulsion pressere distributer @0.20kg / sqm on the prepared bituminous / granular suerface cleaned with mechanical broom as per clause 503 of MoSRT & H specification for road & bridge works.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness using 0.27cum of 13.2 mm to 5.6 mm aggregates using S-60/70 penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 of MoRD including cost, lead, lift royality and taxes of all materials required for the work by manual means etc. complete and as per direction of the Engineer -in- charge.

Providing 6 mm thick pre coated seal coating including cost, conveyance, royalty & taxes of all materials including hire & running charges of P.R .R etc complete

Construction of embankment with approved material obtained from borrow pit with lead and lift transporting to site by mechanical means within lead of 5kms, spreading grading to required slope and compacting to meet requirement of table 300-2 and clause 305 of MoSRT&H specification for road and bridge works etc complete as per direction of EIC. (In Flank)

Finishing Wall with Water Proofing Cement paint Two coat over a coat of cement wash of approved shade on new work including all cost of cement paint etc, Complete.

Providing, fitting, fixing & writting of Km stone, 200mtr stone & cautinary sign board etc all complete as per direction of EIC.

KM Stone

200 mtr Stone

Guard Post

Cautionary sign board

Information sign board ( 1200 x 900 mm )

Please Enable Macros to View BoQ information