General

Manufacture, supply, delivery and fixing of Heavy Steel works like Trusses, Stanchions, Heavy Beams and Girders made with MS Structural Steel, i.e. Angles, Channels & I Sections etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs Work to be done as per SSR and as directed by the department officer.

Manufacture, supply, delivery and fixing of Window grills, Compound wall grills, Iron Doors, Windows made with MS flats etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs

Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk

Providing, fabricating, supplying and fixing custom CNC laser-cut aluminium decorative sports silhouette with 10 mm opal acrylic backing, LED backlighting, SHS support frame, complete with drivers, wiring, SS fasteners, powder coating, transportation, erection and commissioning As per quotation 3 mm CNC laser-cut aluminium fascia - 3000/sqm 10 mm opal cast acrylic diffuser - 2600/sqm IP67 LED backlighting - 2000/ Sqm Powder coating - 700/Sqm SS stand-offs and fasteners Transportation, erection, testing, and commissioning

Supplying and fixing of curtain Glazing made of pre-painted steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer using the section for outer frame of 46 x 52 mm, section for mullion of 46 x 70 mm and section for beading of 18 x 25 mm and the glazing with 5 mm thick plain float glass fitted with Ethyl Propylene diameine Monomer (EPDM) gaskets and the sections cut to length, mitre joined with corner bracket, centre mullions fixed suing mullion cap inluding handle made of high grade Aluminium powder coated and nylon receiver, corner brackets made of CRCA with zinc phosphating, mullion caps made of Glass filled nylon including fixing the frames in the concrete / masonry wall with self expanding screws, etc., complete for finished item.- Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) grid outer frames section size of 46 x 52 mm MAT-01491 BMT-Q.0

External wall insulation with Polyurethane foam (PUF) slab Providing and fixing polyurethane foam (PUF) slab 40mm thick average with PU slab density 36+/-2 kg/m³ for external wall insulation including necessary polymerized plaster reinforced with glass fibre mesh, epoxy based bonding adhesive etc., complete with all lead and lift, transportation charges, loading unloading charges, all taxes, cost of all materials, labour, HOM etc., complete

Providing, supplying, fabricating and fixing of indoor/outdoor signage boards for identification, directional guidance, room names, facility information and wayfinding within the Indoor Stadium, using 3 mm thick ACP / acrylic-faced signage panel mounted on suitable aluminium/MS framework, with digitally printed / vinyl-cut graphics or raised acrylic lettering as approved, including all necessary supporting frame, concealed fasteners, wall plugs, screws, adhesives, edge finishing, cutting, mounting, transportation, labour, scaffolding and all incidental charges, complete as per approved design, colour scheme, typography and directions of the Engineer-in-Charge. (As per Quotation)

Providing, supplying, installing, testing and commissioning of complete Public Address / Mike System for Indoor Stadium, comprising suitable mixer amplifier / powered mixer of adequate capacity, minimum 2 nos. wireless handheld microphones, 1 no. wired/gooseneck microphone, suitable wall-mounted / column-mounted PA speakers distributed within the badminton hall, microphone stands where required, speaker mounting brackets, mixer/receiver unit, necessary audio cables, speaker cables, connectors, power cords, cable conduits/trunking and all associated accessories, including complete wiring, termination, fixing, testing, balancing and commissioning to provide clear and uniform speech coverage throughout the indoor stadium, complete as directed by the Engineer-in-Charge. Equipment shall be of reputed make such as Ahuja / Studiomaster / Bosch / TOA or equivalent approved make. (As per Quotation)

Supplying and fixing of 25mm Outer Dia. heavy duty (2.00 to 2.20 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN ROOF SLAB with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with MS deep junction boxes including all labour chartges etc. complete.

Supplying and fixing of 25mm Outer Dia. heavy duty (1.60 to 1.80 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN WALLS with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with junction boxes and bends of makes Gold medal/Million plast/GM/Sudhakar/Polyline /Bestoplast.Including all labour chartges etc. complete.

Supply, transportation and installation of 150mm x 50mm x 2.0mm hot-dip galvanized ladder type cable tray with bends, tees, reducers, supports/suspenders and accessories complete, for badminton-hall/high-bay wiring routes.(ELEC-4.2.2(a))

Wiring with 2 runs of 14/0.3mm (1.00 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) make of Havells/KEI/Polycab/Bonton/Gold Medal/V-Guard/GM Million/HPL/Finecab/Orbit in the existing pipe with 6-A/10-A 1 way 1 module switch make of Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus, Ceiling rose of make Anchore/Gold Medal Oliv`e/Million Zoom and 8 modular horizontal/vertical cover frame make of Legrand Myrius/Cabtree Thames platinum/GM Four Five/Mullion Logus/Gold Medal Curve/CPL/Panasonic vision/Salzer S.90,Series covering to module box including all labour charges etc., complete for LIGHT POINTS, FAN POINTS & BELL POINTS in Residental Building.

Supplying and Run of U/S Circuit Mains by mean run of 2 of 36/0.3mm (2.5 Sqmm) FRLS/HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/190 specification for Copper Wire make Havells/ KEI/Polycab/GM/Gold Medal/Million/HPL/Fine Cab/Vimal/Orbit in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc,complete.

Supplying and Run of U/S Circuit Mains by mean run of 1 of 22/0.3mm (1.5 Sqmm) FRLS/HFFR PVC insulated 1100V grade as per IS.694/1990 specification for Copper Wire make Havells/ KEI/Polycab/GM/Gold Medal/Million/HPL/Fine Cab/Vimal/Orbit in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc., complete.

Supply and fixing of 6-A/10-A 3/2 Pin 2 Module Modular Socket with shutter of make Legrand Arteor/Schneider Zen celo/Honeywell Blenge plus with 6-A/10-A, 1 Way 1 Module Modular switch of make Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus 6-A Switch Control on a common switch board of with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 16-A/6A 1 way combi Socket with shutter make of Legrand Arteor/Schneider Zen celo/Honeywell Blenge Plus duly recessed in module box including cost and conveyance of all materials to work site and all labour charges etec.,complete.

Supply and fixing of 4 Way SPN Distribution Board with IP-43 Protection (Metal Door) as per 13032 and suitable for Single Phase ECCB/RCCB/DP Isolator as Incomer Incommer of make of Gold Medal/GM/ Milltec/Sputnik/Benlo/Vimal/Fybros by Kundan cab and 6-32A 10KA SP MCB C/D curve as OUTGOING make of Gold medal/Milltec/Sputnik/Benlo/GM/Vimal including internal connections and all labour charges for surface/flush mounting etc., complete for finished item of work as directed by the department. (40A DP Isolator/RCCB/ELCB=1 No. for Incomer {and} 10KA-6-32A SP MCBs = 4 Nos for Outgoing).

Supply of 63A, 4 Pole, 30mA RCCB for earth leakage protection, conforming to IEC 61008 / IS 12640-1. ELEC-2.12.1(g)

Supply of 6-32A, SP, 10kA C/D Curve ISI marked MCB for outgoing lighting, fan, socket and service circuits. ELEC-2.10.1(a)

Supply, Transportation, fabrication and erection of 14 SWG CRCA Sheet Steel enclosure for Power Control Cubical Panel/Boxes etc., including cutting, bending, drilling, welding and reveting etc., with cleaning 7 tank process and painting with powder coating including cost and conveyance of all materials to site of work and all labour charges etc., complete as directed by the department.

Supply and Erection of 125-A, 4 Pole MCCB adjustable confirms to IS/IEC-60847-2 having breaking capacity 25-KA with Thermal Magnetic setting release Panel Mounted. of make L&T/ Schneider/Siemens/Legrand/Hager based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.

Supply of 4 Pole, 4 Module, 40kA, 1.4kV Voltage Surge Protector conforming to IEC/EN 61643-11 for main LT panel. ELEC-2.8.1(B)

Supply and erecting of 95 Sq.mm 3.50 Core XLPE insulated 1100.V Grade Armoured Alluminium Cable of makeTorent/Universal/Unicab/Havells/KEI/Gloster/Polycab as per specification confirming to IS-7098 (Part-I) with ISI mark making trench in soil upto 0.90 Mts. depth emeeding the cable with sand bed of 0.10 Mts. thick layers and brick placed on top of the cable width wise all over the run and back filling the excavated earth with stones are hard materials and making the surface proper with 15 Cm.crown on the top duly providing route indicators inclduing including cost and conveyance of all materials to work site and all labour charges etc.,complete for finished item of work.

Supplying and fixing of Crimping type Copper Lugs confirming to ISI specification suitable for cable of 95 Sq.mm. including nuts & bolts with connections. Evenly crimped with high pressure tool and connected to switchgear terminals with brass/cadmium plated nut & bolts in an approved manner including cost and conveyance of all materials to site of work, nuts & bolts and all labour charges for erection etc., complete.

Supplying and fixing of Single compression Brass Cable Glands for 3.5 Core XLPE Armoured Cable from 70 Sq.mm. to 150 Sq.mm. with brass washers, rubber rings and errected with cable ends and leads connected and including cost and conveyance of all materials to site of work and all labour charges etc., complete..

Supply and erection of 0-415-V Volt Analog Meter on existing Box/Panel Board of make Conzerve /Elmeasure/Legrand/Meco/HPL including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department.

Supply and erection of Led Indicator Lamps (Red, Yellow & Blue) of make L&T/C&S/ Salzar/HPL, on existing Panel Board including cost and conveyance of all materials and all labour charges for fixing charges etc., complete etc., as directed by the department for fixing Panel Board. (Make of Conzerve/Elmeasure /MECO/HPL).

Supply and erection of Selector Switch for Voltmeter/Ammeter on the existing Box/Panel Board make of L&T/C&S/Salzar/HPL including all connectionsand including cost and conveyance of all materials and all labour charges for fixing charges etc., complete etc., as directed by the department.

Supplying, fabrication and erection of 25mmx6mm size 230-A in each bar of 1.00 Mt. length 4 Nos. of Aluminium Bus Bars in the existing shet steel enclosure with resin cast insulator supports etc., including cost and conveyance of all materials to site of work and cost of drilling holes, bolts & nuts, and all labour charges for erection of Bus Bars etc., complete. (Weight per Mt. in Kg. = 0.402 Kgs.) As per Revised Standard Data 12.2.1. (Standard Data P.No.305.d)

Supply and fixing of 32-A 240-V Porcelain rewirable FUSE UNITS make of GM/Sputnik/Million/ Gold Medal/Vimal/Star Benlo/Fybros by jundan cab on existing Panel Board including cost and conveyance of all materials and all labour charges for fixing charges etc., complete etc., as directed by the department for fixing Panel Board.

Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in hard gravel/hard desintegrated rock upto 2.10 Mts.' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2.50 Mts. length using GI bolts and nuts and fixing earth wire including supply and fixing 18''Dia., 2" thick hume pipe ring and refilling the pit with 5 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work.

Earth work excavation of trench in hard ground soil, laying of U.G. Cables from 70 Sq.mm. to 400 Sq.mm. on sand cushion covering the cable with brick and back filling of trench duly providing route indicator embedded in C.C. including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Supply and Fixing Of Fan Hooks including all labour Charges etc.,

Provision for Seignorage charges

Provision Towards merit 2%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for Architectural Design @ 2% on ECV including GST

Provision for PMC @ 2% on ECV including GST

Provision for TPQA @ 0.739 %

Unforeseen item