Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.1 LAccepted-AOC C 234 ADG P CHENNAI | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹43.8 L+₹41,870 (0.97%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹43.9 L+₹50,500 (1.16%)Rejected-Finance MAKKIL HOUSE MUNDAMVELI POST MOOLAMKUZHI KERALA KOCHI 682 507 | ERNAKULAM | KERALA | 682507 | L3 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2023_MES_604141_1
GE MAINT EZHIMALA 8581
Open Tender
Civil Works
Item Rate
330 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹90,000
Yes
22 Aug 2023
19 Jun 2023
21 Jul 2023
19 Jun 2023
19 Jul 2023
3 Jul 2023
20 Jun 2023 - 27 Jun 2023
Amount
Note:- (a) The work of periodical services shall be carried out as up to G+1 building.Necessary steel scaffolding shall be provided by the contractor. All safety measures shall be strictly adhered. (b) Contractor shall also ensure medical/life insurance cover for the labour party and the copy of the same shall be submitted by the contractor to the GE through EIC. (c) The contractor shall submit the gaurentee of 5 years life for item Nos 01, 21& 22 ( Two coats of antifungal paint and premium acrylic emulsion paint on exterior surfaces). (d) The work item Nos 01,21 & 22 ( Two coats of tile guard paint on roof and Premium acrylic emulsion paint on exterior surfaces) shall be applied by mechanical sprayer through authorized company applicator of approved shade., necessary certificates of authorised applicator has to be submitted by contractor before commencement of work. (e) Contractor should procure entire qty required for item No's 01,21 & 22 as per CA qty at a time or in various consignemnts as per requirement (with minimum requirement of three months) and material shall be stored in covered godown /store room in such a manner as to prevent deterioration or any damage. The storage, accounting and preservation of material procured by the contractor shall be done as per standard engineering practice till the same is incorporated in the work and the cost of the same shall be deemed to be included in the unit rate/amount quoted by the tenderer. (f) Material store room shall be provided with two locks on each door. The key of one lock at each door shall remain with the Engineer-in-charge or his representative and that of the other lock with the contractor‟s authorised agent at site of works so that material is removed from the godown only according to daily requirement with the knowledge of both the parties. (g) The contractor shall submit original purchase vouchers for the total quantity of material to be incorporated in the work. (h) Painting of roof tiles (Item No 01) is required to be carried out slopping roof, chajja etc upto height 10 m above GL and contractor is required to make necessary arrangements for water and electricity required for jet washing and rate quoted is deemeed to be included for above.
M&L for preparation of old treated mangalore pattern roof tile surface by cleaning the surfaces with jet washing and wire brushes to remove all existing fungal, growth etc. and applying two coats of antifungal paint using Asian paints/Berger paints/Nerolac or equivalent tile guard paint complete all as per manufacturer's instructions. Note:- The work shall be carried out on upto double storey slopping roof, chajja etc. and contractor is required to make necessary arrangements for water and electricity required for jet washing and rate quoted is deemed to be included for above.
Dismantling single layer of mangalare pattern tiles in roofing complete all as specified and as directed.
Refixing roof tiles mangalore pattern interlocking tiles complete all specified and as directed.
M&L for roof tiles mangalore pattern interlocking tiles any size as directed laid dry complete all as specified and as directed.
M&L for preparation of old treated surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.
M&L for preparation of old treated celling surfaces and applying one coat of oil emulsion distemper complete all as specified and as directed.
M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion paint having VOC content less then 50 gms/ litres (interior grade) on wall complete all as specified and as per manufacturer's instructions.
M&L for complete removal of existing treatment and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer over putty as required complete all as specified and as per manufacturer's instructions.
Taking down cement or cement lime plaster of any description including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
M&L for 10mm thick rendering in CM 1:6 on wall surface, surfaces finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparation of new plaster surface and applying two coats of acrylic emulsion paint having VOC content less then 50 gms/ litres (interior grade) on wall over a coat of acrylic primer over putty as required complete all as specified and as per manufacturer's instructions.
M&L for preparation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed.
M&L for preparation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces complete all as specified and as directed.
M&L preparation of old painted surfaces exc 10 cm width or girth and applying one coat of aluminium paint on steel/iron surfaces complete all as specified and as directed.
M&L for preparation of old painted surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of epoxy paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of epoxy paint over a coat of epoxy primer complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 using liquid WPC over fair faces of brick work or concrete surfaces finished even and smooth ( in patches) complete all as specified and as directed by EIC. Note:- WPC shall be measured and paid under relevant item.
M&L for removing shrubs, vegetation, roots etc. from external wall surfaces, by dismantling brick work, RCC or taking down plastering as the case may be, including dismantling SWR pipes, OH PVC service tanks etc. and refixing the same in original position and making good the surface dismantled complete all as specified and as directed by EIC. Note:- Area to be dismantled exc 1 Sqm and not exc 3 Sqm.
M&L for treating holes cracks etc. up to 10 mm by making V groove using patti blades and filling the cracks with cement and sand aggrgate mixture developed with polymer modified mortat (PMM) with suitable polymer like home shield crack fill paste home shield advance latex plus and home shield cement mix plus (Asian paints/Berger paints/Dr Fixit make or equivalent) and allowed to dry complete all as specified and as directed by EIC.
Supply only water proofing compound (WPC) complete all as specified and as directed.
S&F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staple complete all as specified and as directed.
M&L for 15 mm thick rendering on stone masonry or faces other than fair faces of brick work in cement mortar 1:6 surfaces finished even and fair complete all as specified and as directed.
M&L for preperation of new plastered surfaces and applying two coat of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer all as specified and as per manufacturers instructions.
Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each refixing in same opening after easing and adjusting complete all as specified and as directed.
Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.
Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.
S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, etc complete all as specified and as directed.
S&F pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.
M&L for filling concrete inside frame in PCC 1:3:6, type C-0 complete all as specified and as directed.
S&F 30mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both side complete all as specified and as directed.
S&F 30mm thick 1st class hard wood glazed and skelton door shutters, open rebated and prepare to receive glass, gauge etc, size of members of shutters as specified in SSR part I complete all as specified and as directed.
S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staple complete all as specified and as directed.
Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each complete all as specified and as directed.
S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer's specification and drawing complete all as specified and as directed.
S&F factory made soilid panel PVC door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail, & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per manufacturer's specification and drawing complete all as specified and as directed.
S&F in repairs, 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.
S&F in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F in repair 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and overall length of cover plate 140mm complete all as specified and as directed.
S&F in repair 300mm long ordinary MS rat tail rod pattern springs including roller plate complete all as specified and as directed.
Dismantling cabinets boarding, any description, fixed in any position with screws incl all fittings complete all as specified and as directed.
S&F in repair prelaminated particle board 18/19 thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work complete all as specified and as directed.
S&F in repair 18/20 mm thick plywood, BWR grade, type BB, fixed with screws to timber frame work as in cup boards etc complete all as specified and as directed.
M&L for preparation of new or previously untreated wood based surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F PVC magnet catcher fixed with screws to wooden frames complete all as specified and as directed.
M&L for PVC lipping edge tape fixed with nails/glue complete all as specified and as directed.
S&F stainless steel telescopic channel drawers slides (length n exc 600mm) complete all as specified and as directed.
S&F stainless steel closing hydraulic hinges for shutter complete all as specified and as directed.
S&F in repairs continuous (piano) hinges MS bright finish or electrogalvanised, width of flaps (when open) 30 mm complete all as specified and as directed.
S&F in repairs 75mm long aluminium handles, cast type, anodised complete all as specified and as directed.
S&F in repairs 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
S&F harrison rails, mild steel, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
S&F in repairs harrison rails, mild steel, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and as directed.
M&L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing incl beading complete all as specified and as directed.
Supply & fixing in repair MS curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm,PVC coated and colour / Pattern over all dia 28 to 29mm including taking down existing curtain rod complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair plastic finial of 28 to 29mm bore decorated type of any colour /pattern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed by Engineer-in-Charge. Make:- Aerolux/MEC/VISTA.
Supply & fixing in repair mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed by Engineer-in-Charge.
S&F in repair anodised powder coated of any colour three track existing aluminium sliding windows shutters incl necessary cleaning, jointing cleats,glazing clips, rubber neoprene packing, incl 4mm mm thick tinted/ frosted glass, aluminium wire cloth complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, sides of rounded or chamfered on edges of sunken floor complete all as specified & directed by Engineer-in- charge. Note:- Reapir to existing hold fast holes.
S&F in repair for door seal with aluminium top and bottom fiber brush for glazed , skeleten and panelled door to stop germs,mosquito, snake from outer side (for size n exc 1.2mtr) complete all as specified and directed by Engineer-in-Charge.
S&F framed work such as grills, gratings etc with ends of bars sholdered or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framework of watertanks and simillar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed.
LAKSHMI BUILDERS
Johnson Raiju
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .