REPAIR/REPLACEMENT OF DECAYED WOODEN DOORS WITH STEEL FRAME IN MILITARY HOSPITAL, PROVN OF WAITING ENROLLING SHED AT ARO AND PROVISION OF CERTAIN MINOR WORKS UNDER AGE B/R - I AT GE WEST BAREILLY.

Amount

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 20 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes along with dismantling of old floor tiles with screed or demolition of cement concrete floor upto 40 mm thick complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300 mm X 600 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 10 mm thick rendering in Cement mortar 1:4 along with dismantling of old wall tiles with screed bed complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) with and including making good the disturbed portions of walls in CM 1:4 complete all as specified and directed.

S & F of 150 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S & F of 100 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F of 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 75 mm long stainless steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 with and including demolition of existing RCC cover slabs complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparing old decorated wall surfaces and applying one coat of cement base paint complete all as specified and directed.

M & L for preparing old decorated wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed.

S & F of 18-20 mm thick mirror polished Z-black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 10 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M & L for use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in chajjas and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) white including fixing bolts and making connection to trap, flushing cistern, flush pipe etc. with and including providing plastic seat cover suitable for water closet pedestal pan, white closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices alongwith making good the disturbed surface to match with existing surface complete all as specified and directed.

S & F in repairs PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection and making good disturbed surface complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed.

S & F in repairs 15 mm bore fancy type brass bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore fancy type, chromium plated brass stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm bore fancy type, chromium plated brass stop valve, with long shank and cup (Concealed Type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.Model : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware ,Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 WHB

S & F of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F of 32 mm bore low density polyethylene (LDPE) pipe of pressure rating 6 Kgf per Sqcm laid in trenches / under floor or fixed to wall complete all as specified and directed.

S & F of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection complete all as specified and directed.

S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Re-fixing of 15 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. NOTE: - OLD STEEL WATER TUBING OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

Re-fixing of 20 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. NOTE: - OLD STEEL WATER TUBING OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) bend any radius provided with oval access door complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius provided with oval access door complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed.

S & F in repairs 100 mm dia grating doom of PTMT (minimum weight 25 gram) complete all as specified and directed.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 80 mm bore pipe complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M & L for 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and incl 25 mm thick sand cushioning complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position with and including dismantling of water tank exc. 250 Litre but not exc. 500 Litre capacity complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.Make Rajshree/Sintex

S & F in repair vitreous china urinals, bowl type (flat back or corner wall type) 465 X 355 X 265 mm white (minimum) with grating and union for discharge pipe but excluding flushing cistern, flush pipe etc. complete all as specified and directed.

M & L for providing plain cement concrete, type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster consisting in two layers (5 mm thick in cement mortar 1:4 with and including mixing of water proofing compound as per manufacturer’s instructions over 10 mm thick in cement mortar 1:6) on other then fair faces of brick work finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint as base coat and making camouflage pattern by applying two more coats of different coloured patches in different shapes as directed over a coat of primer complete all as specified and as directed

M & L for cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 200 mm bore including packing under and completely surrounding pips with concrete after they are laid and tested complete all as specified and directed.

S & F of 200 mm bore reinforced concrete pipe class NP-2 laid, jointed with collar in neat cement slurry complete all as specified and directed.

M&L for Aluminium anodised powder coated partition wall with sash bars, fabricated as per site requirement section having vertical and horizondal rail shall be size not less then 83.50 mm wide including necessary jointing cleats, aluminium anodised snap beading, screws, PVC packing and 5.5mm thick tinted glass etc complete all as specified and directed.

M&L for Aluminium anodised chowkats made of Aluminium section of size 101.60mm x 44.75mm x 3.18mm with necessary jointing cleats for fitting etc fixed to wall complete all as specified and directed.

M&L for Aluminium anodised powder coated door shutter single / double leaf, side hung type without sash bars (in two panels) fabricated with 1.5 mm thick Aluminium sections of size as vertical and top rail 83.50mm X 44.45mm, bottom rail 150mm X 44.45mm and middle rail 115mm X 44.45mm including necessary jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fittings such as pair of ‘D’ type handle (decorative type), tower bolts 150mm long 2 Nos for each shutter, 100mm size butt hinges minimum 03 Nos for each shutter, PVC packing, locking arrangement with mortice lock of best quality (as approved), 5.5 mm thick tinted glass with AF crest on top panel shutter including necessary beading/ packing and necessary fittings & fixtures complete all as specified and directed.

S & F of double action heavy duty floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel complete all as specified and directed.

S & F of flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out in soft / loose soil, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface complete all as specified and directed.

M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S & F of mild steel work in hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing of steps, wind ties, post and struts for fencing, flat iron fillets and the like including necessary cutting, drilling holes, notching etc. as required conforming to Fe-290 Grade E-165 complete all as specified and directed.

M & L for mild steel round bars 10 mm dia, cut to length, bent to shape, hooking ends as required for support of chain link fencing complete all as specified and directed.

S & F of mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc. 10 cm and diameter of the neck of bolt exc. 11 cm but not exc. 15 cm complete all as specified and directed.

S & F of chain link fencing, size of mesh 100 X 100 mm made out of 4 mm dia GI wire to any type of standard, rails, straining bolts etc. complete all as specified and directed.

S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. confirming to Fe-410-W (Grade E-250) Quality 'B', drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

M & L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and completely surrounding pips with concrete after they are laid and tested complete all as specified and directed.

M & L for 150 mm bore salt glazed stoneware drain pipes grade ‘A’ laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.

M & L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed.

M & L for construction of soak well of 1.20 m internal dia and 3.00 m effective depth (Except Free Board) including necessary excavation and earth work in any type of soil, PCC 1:3:6, type C-2 in foundation, brick work and honeycomb brick work in cement mortar 1:4, PCC Band 1:2:4, Type B-1, RCC M-25 in slab, Pre-cast RCC manhole cover duly reinforced, Dwarf wall and plaster thereof 15 mm thick cement plaster in cement mortar 1:4, from work as required for soffit and sides, filling of brick bats of appropriate size complete all as specified, directed and shown on TD drawing No. TD/309 Sheet 1/4 to 4/4.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for providing 25 mm thick pre-cast cement concrete louvers or RCC Jali made out of cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate and set in cement mortar 1:4 including all mouldings etc. complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance exc. 250 m but not exc. 500 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary form work and water proofing compound as per manufacturer’s instructions complete all as specified and directed.

M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling with cement mortar 1:4 finished even and fair complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for glazed digital ceramic coloured tiles 350 mm X 250 mm X 7 mm thick or 450 mm X 350 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15 mm thick rendering in Cement mortar 1:4 complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for rubber moulded coloured chequered cement concrete tiles 30 cm X 30 cm X 25 mm thick, set, jointed and pointed in neat cement slurry as in floors with and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.

M & L for providing precast cement concrete block in any shape as approved by GE made of PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in kerb stone of size 300 mm X 350 mm X 100 mm thick with and including necessary excavation, earth work and setting in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) with and including making good the disturbed portions of walls in CM 1:4 complete all as specified and directed.

Taking down door or window shutter of any description exc. 1.00 Sqm but not exc. 2.00 Sqm each complete all as specified and directed.

Taking down door or window shutter of any description not exc. 1 Sqm each complete all as specified and directed.

M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.

S & F of 35 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 100 mm size aluminium anodised hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F of rubber beading for doors of required size complete all as specified and directed.

S & F of 0.56 mm thick plain aluminium sheeting, alloy 31000 H4, fixed with aluminium alloy screws as in back and bottom of door shutters and the like as required at site complete all as specified and directed.

S & F of 100 mm long stainless steel butt hinges, medium weight cold rolled complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F of 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane with and including hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer and a thick layer of wall care putty to achieve smooth surface complete all as specified and directed.

M & L for 18-20 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish over and including 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes, finished even and rough with and including dismantling of existing floor or kota stone slab with cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe-410-S including cutting, welding etc. complete all as specified and directed.

M & L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor and finishing top surface even and smooth with using extra cement complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

S&F of 4mm thick E-Board ceiling tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid comprising 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with and including hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 m centre to centre both ways with dash fastners complete and making good disturbed surfaces complete all as specified and directed.

S & F of point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) drawn into and including PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed on surface and sunk cast iron or 1.6 mm thick pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connecting all metal parts, to common earth dolly complete all as specified and directed.

Supply and fixing of switch piano flush button single pole one-way 5 Ampere complete all as specified and directed.

S & F of ceiling rose three phase, PVC / polycarbonate isolated body complete all as specified and directed.

S & F of factory made sheet metal distribution board made of CRCA Sheet, dust and vermin proof, (single door type) when MCB’s to be used, single pole and neutral, 2 ways with 200 ampere rated copper bus bar, 240 volts fixed sunk / flush to the wall or niche complete all as specified and directed.

S & F of MCB single pole and neutral, 32 Ampere 240 volt ‘C’ curve 10 KA including suitable size copper Lugs complete all as specified and directed.

S&F LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

M & L for earthing complete with galvanised iron earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade LT cable (heavy duty) of size 6 Sqmm, 2 core XLPE insulated armoured with stranded aluminium conductor including commissioning and testing complete all as specified and directed.

Supply and fix ceiling Fan with blades and down rod, 230/240V of size 1200mm sweep complete all specified and directed.Note:-Fixing incl modification in GI pipe for connecting of ceiling fan included in quoted rate.

M & L for fine sand free from sharp materials as in filling in trenches for cable protection including necessary punning and consolidation as required complete all as specified and directed. Note:- Punned thickness of sand shall be measured.

M & L for laying brick as in protection covers over cables using sub class 'B' old size bricks complete all as specified and directed.

S & F 40 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc complete all as specified and directed.

Notes:- If any item has erronously been repeated in this schedule and the contractor had quote different rates for the same. In such cases, least quoted rate for whole quantity shall be applicable and the item for which higher rate has been quoted by the contractor, shall not executed at site.

JAI SRI RAM ASSOCIATE

SANJEEV ENTERPRISES

R K CONSTRUCTION

Mohit Enterprises

TRISHOOL ASSOCIATE

hardeep singh enterprises