PROVN OF MARRIED ACCN FOR OFFICERS AND AIRMEN AT 3 AFSB GANDHINAGAR (PHASE-I)

Amount

SCHEDULE 'A' PART I is not prepriced by MES and prepriced rates indicates 0.00 under col 5 signified this fact only . (TO BE QUOTED BY THE CONTRACTOR) Bidders shall insert their lumpsum amount in BOQ Ser No 1 to 5 in the Green coloured field under Col-6 only. Note : The quoted rate against is deemed to included for the provisions contained in Sch 'A' Notes. Ref Sch A Notes complete before quoting these items. Structural design and structural drawings for super structure and foundations for the building/structure shall be prepared to comply with the provisions for design and analysis of RCC structures as per latest editions relevant IS Codes

Design and Construction of AIR CMDE BUNGALOW using 3D monolithic Precast modular Technology in RCC M-40 Design mix with Cast in Situ foundation incl ATT, WPT, aluminium windows and ventilators, SS railing, seismic strengthening etc. as shown vide drg no CEAG/GAN/AR/60R/2024 Sh 1R/2 & 2R/2, incl structural designing complete all as specified and as directed.

Design and Construction of GP CAPT BUNGALOW with using 3D monolithic Precast modular Technology in RCC M-40 Design mix with precast panel walls and Cast in Situ foundation incl ATT, WPT, aluminium windows and ventilators, SS railing, seismic strengthening etc. as shown vide drg no CEAG/GAN/AR/61R/2024 Sh 1R/2 & 2R/2, incl structural designing complete all as specified and as directed.

Design and Construction of MARRIED ACCOMODATION FOR SQN LDR AND ABOVE WITH SERVENT QTRS & GARAGE (G+1) (One Block of 04 Units) having 02 qtrs in each floor, using 3D monolithic Precast modular Technology in RCC M-40 Design mix with precast panel walls and Cast in Situ foundation incl ATT, WPT, aluminium windows and ventilators, SS railing, seismic strengthening etc. as shown vide drg no CEAG/GAN/AR/59R/2024 Sh 1R4 to 3R/4 & CEAG/GAN/EM/59R/2024 Sh-1/1 incl structural designing complete all as specified and as directed.

Design and Construction of SERVENT QTRS & CAR PARKING (S/S) for Air Cmde using 3D monolithic Precast modular Technology in RCC M-40 Design mix with precast panel walls and Cast in Situ foundation incl ATT, WPT, aluminium windows and ventilators, SS railing, seismic strengthening etc. as shown vide drg no CEAG/GAN/AR/60R/2024 Sh 1R/2 & 2R/2, incl structural designing complete all as specified and as directed.

Design and Construction of SERVENT QTRS & CAR PARKIG (S/S) for Gp Capt using 3D monolithic Precast modular Technology in RCC M-40 Design mix with precast panel walls and Cast in Situ foundation incl ATT, WPT, aluminium windows and ventilators, SS railing, seismic strengthening etc. as shown vide drg no CEAG/GAN/AR/61R/2024 Sh 1R/2 & 2R/2, incl structural designing complete all as specified and as directed.

Notes : for Ser No Item No 1 to 5 (i) Design , Project brief and structural design basis report shall be submitted by the contractor duly vetted by IIT/NIT. (ii)The Structural system above the plinth level prodominantly shall consists of three dimensional reinforced concrete volumetric box units. (ii) Each box unit to be typically bouded by reinforced concrete walls on four sides and roof at the top, making each box unit stable by itself. (iii) Openings for windows and doors may be present in the walls. (iv) Wall thickness shall be 125mm thick. (v) Partition wall thickness shall be 100mm thick. (vi) Slab thickness shall be not less than 125mm thick.

Schedule ‘A’ Part IA to XI under Ser No. 6.00 to 15.00 are prepriced by MES. Bidders shall insert their lumpsum amount in the green coloured field under Col-6 only.

Lump sum price worked out for BUILDINGS/ STRUCTURES as listed in Sch 'A' Part IA.

Lump sum price worked out for EXCAVATION, EARTHWORK AND SITE CLEARANCE as listed in Sch 'A' Part II

Lump sum price worked out for INTERNAL WATER SUPPLY as listed in Sch 'A' Part III

Lump sum price worked out for INTERNAL ELECTRIFICATION as listed in Sch 'A' Part IV

Lump sum price worked out for ROAD / PATH as listed in Sch 'A' Part V

Lump sum price worked out for AREA DRAINAGE as listed in Sch 'A' Part VI

Lump sum price worked out for SEWAGE DISPOSAL as listed in Sch 'A' Part VII

Lump sum price worked out for EXTERNAL WATER SUPPLY as listed in Sch 'A' Part VIII

Lump sum price worked out for FENCING & GATE as listed in Sch 'A' Part IX

Lump sum price worked out for EXTERNAL ELECTRIFICATION as listed in Sch 'A' Part X

SCHEDULE 'A' PART - XI MISCELLANEOUS ITEMS is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.

MODULAR KITCHEN

S&F Modular Kitchen on both side of kitchen with 18MM THICK HDHMR board with laminate finish of any colour fixed with heavy duty SS Screws with rawl plugs and shutter fixed on Auto concealed cabinet hinges, Magnetic catcher, suitable size stainless steel handles and heavy duty telescopic channel complete with following accessories : (i) Stainless steel wire(6mm) modular kitchen basket set with corrosive resistance durable and seamless glossy finish (ii) Chase SS Basket 4'' Plain - 3 Nos (iii) Chase SS Basket 4" Cutlery - 1 Nos (iv) Chase SS Basket 4" Cup & Socer - 1 Nos (vi) Chase SS Basket 6" Plain - 2 Nos (vii) Chase SS Basket 8" Plain - 3 Nos (viii) Chase SS Basket 8" Thali - 1 Nos (ix) Plain Cabinets at top & Bottom with shelves as shown on drawing and as directed by GE NOTE: Contractor shall submit the drawing of Modular kitchen to be provided with above accessocieres to GE for approval ,complete all as specified and as directed

INTERNAL WATER SUPPLY

S&F CP bib cock with wall flange fixed to15mm bore pipe complete with all fittings and as specified . (Make- Jaquar Cat No. FON-40037 or Equivalent in cera, parryware).

S&F Concealed stop cock with fitting sleeve, operating lever & adjusting wall flange with seal specified and directed (Make Jaquar Cat No ALD-CHR-083Ft & ALI 85083K or equivalent in cera, parryware).

S&F Angular stop cock with wall flange fixed to15mm bore pipe complete all as specified. (Make- Jaquar Cat No. KUP-35053PM or Equivalent in cera, parryware).

S&F Pillar tap single lever long body without popup waste system with 600mm long braided hoses complete all as specified and directed. (Make : Jaquar Cat part No OPP-15021PM or Equivalent in cera, parryware).

S&F Bottle trap 32mm size with 250mm &190mm long wall connection pipes & wall flange complete all as specified . (Make- Jaquar Cat No. ALD-769L250X190 or Equivalent in cera, parryware).

S&F 15 mm CP Bib cock 2 way with wall flange fixed to15mm bore pipe complete with all fittings and as specified . (Make- Jaquar Cat No. KUP-35041PM or Equivalent in cera, parryware).

S&F 15mm CP Health Faucet with 1.20 mtr long flexible tube & wall hook complete all as specified . (Make- Jaquar Cat No. ALD-573 or Equivalent in Cera, parryware)

S&F Liquid Soap dispenser with metallic bottle complete all as specified . (Make- Jaquar Cat No. ACN-1135N or Equivalent in Cera, parryware)

S&F toilet paper roll holder with stainless steel flap complete all as specified . (Make- Jaquar Cat No. ACN-1153S or Equivalent in cera, parryware).

S&F stainess steel towel rack 600mm long with lower hangers complete all as specified . (Make- Jaquar Cat No. ACN-1181S or Equivalent in Cera, parryware)

S&F Sink mixer with regular swinging spout (wall mounted model) with connecting legs & wall flanges complete with all fittings and as specified . (Make- Jaquar Cat No. ARI-39309 or Equivalent in Cera, parryware)

S&F CP Overhead shower 150x150mm squarel shape single flow (ABS Body chrome plated with grey face plate ) with rubit cleaning system complete all as specified . (Make- Jaquar Cat No. OHS-35495 or Equivalent in Cera, parryware)

S&F CP wall mixer with provision for overhead shower with 115mm bend pipe on upper side, connecting legs & wall flanges complete with all fittings and as specified . (Make- Jaquar Cat No. FUS-29273UPR or Equivalent in Cera, parryware)

INTERNAL ELECTRIFICATION

S & F for wall mounted LED box type tube light fitting 4' x 20 watts industrial commercial interior batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F for LED tube light fitting with aluminium housing 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting with warranty option of 5 years from date of installationcomplete all as specified and as directed.

S & F for LED tube light fitting with aluminium housing 2 feet x 5 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting with warranty option of 5 years from date of installationcomplete all as specified and as directed.Make :- Bajaj or its equvalent in Wipro, Philips, Havells.

S & F for Decorative wall mounted luminaire made out of Nickle finesh square base with bend pipe with unbreakable globe glass suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed.

Supply & fixing for storage water heater (Geyser) 25 Ltr of capacity verticle mounting type electric driven (single phase), not less than 5 Star rating (BEE) and grouting new suitable size anchor fastner in wall and mounting geyser on anchor fastner and writing MES No on geyser and testing complete all as specified directed.

Supply and Installation of Smart Single Phase Meter of different makes (Not more than 33 % of a particular make) including polycarbonate boxes with transparent cover to view meter display with the following specifications: (a) AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 5A-60A, with 3200 impulses per KWh,LED for Phase presence & LED for Relay status, conforming to IS-16444 standard with inbuilt 865-867 MHz 6 Low PAN Mesh Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LCD based display only with compatible IP54 compliant polycarbonate box for outdoor mounting with optical port Provision on meter box. Meter Should support the following data : 15/30 min instantaneous data for Voltage, Current, Power factor, Power, Cumulative energy and frequency, monthly billing data & antitamper features. Load survey data for 45 days with 30 min integration period for kWh, Voltage, Current, frequency etc.Meter should have connect / disconnect functionality operable from prepaid billing software & shall show balance on display The meter should support open communication protocol DLMS with the software Note :- (a) It should run the meter in both prepaid and postpaid mode (b) The meters should carry 5 year warranty. (c) OEM shall have own NABL accredited lab for testing meters as per IS 16444 and certification shall be provided during sample approval (d) The meter cost would include DCU/ Gateway and repeater cost for RF commuication meters

Supply and Installation of Smart Three Phase Meter of different makes (Not more than 33 % of a particular make) including polycarbonate boxes with transparent cover to view meter display with the following specifications: AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 3x240 V, 50 Hz, 10A-60A, with 1600 impulses per KWh & KVArh,LED for Relay status, conforming to IS-16444 standard with inbuilt Cellular or inbuilt 865-867 MHz 6LowPAN Mesh Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LCD based display only with compatible IP54 compliant polycarbonate box for outdoor mounting with optical port Provision on meter box Meter Should support the following data : 15/30 min instantaneous data for Voltage, Current, Power factor, Power, Cumulative energy and frequency, monthly billing data & antitamper features. Load survey data for 45 days with 30 min integration period for kWh, Voltage, Current, frequency etc.Meter should have connect / disconnect functionality operable from prepaid billing software & shall show balance on display The meter should support open communication protocol DLMS with the software Note :- (a) It should run the meter in both prepaid and postpaid mode (b) The meters should carry 5 year warranty. (c) OEM shall have own NABL accredited lab for testing meters as per IS 16444 and certification shall be provided during sample approval (d) The meter cost would include DCU/ Gateway and repeater cost for RF commuication meters

Supplying, Fixing, Commissioning and testing of configuration of cloud based prepaid software for with following modules: (i) Meter Data Management Module: The meter data management module would be responsible for collecting the data from the data concentrator and make the data available to the billing system. The system would support offline meter data entry. The meter data management system would capture and provide the following data: (a) 30min instantaneous data from all the meters for seven parameters- Cumulative Energy,Power, Current, Voltage, Power factor and Frequency. (b) Monthly and quarterly billing survey data for cumulative energy and max demand, Load Survey Data, Tamper Events (ii) Communication module: The system should provide communication of energy data and bills via print, email. (iii) Meter Master Data : The system would support meter data repository. The system should support meter replacment process. (iv) Excel Export : The system would support export of metering and billing data in excel format Note:- (i). Software will be compatible with all makes of smart meter & shall be CERT-IN certified from CERT approved vendors for any cyber security related threat & complying as per ENC guidelines. (ii) It shall also include recurring SMS charges, Email gateway integration charges, payment gateway charges for online meter recharge etc & shall be included in quoted rate for 2 years DLP period. (iii) Provision for comprehensive operation including periodic charges of telecom operator, smart meter billing from completion of work till the competion of defect liability period of 2 years. (iv) The software would be hosted on MEITY GCC approved server. 2 years hosting costs would be included.

OUTGOING : (a) MCB, Tripple pole & neutral, 63 amps, 415 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 4 Nos (Officers Accn) (b) MCB, single pole & neutral, 10 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 1 No (Stair case lighting) (c) Slot for fixing the three phase smart prepaid meter - 04 Nos (Cost of Smart meter cost will be paid seperately under respective itemly)

M& L Thermo plastic road marking 2 mm thick painting (lines, dashes, arrow, letters etc on new road surfaces) with road safety spikeries glass beads including preparation of new road surfaces and applying paint by using special applicator machine with heating arrangement complete all as specified and as directed .

Supplying & fixing delinator made out of acrylic material fitted with high intensity retro reflector in yellow, red colour fitted on CRCA pipe 40mm dia and 60cm long powder coated or stove enamelled white/black colour provided with steel wire mesh made up into cage for safety of reflector and embedding the same in PCC (1:2:4) type B-1 using 20mm graded stone aggregate size 300x300x450mm including necessary excavation & removal of spoil complete all as specified & directed by Engineer-in-charge. Make : Interantional wire Products (Modle No. IWP5) or equivalent of Dark Eye/Surya Enterprises/Greenlite/TATA BP/Sinor Infrastructure.

S&F dual directional reflective cat eye of size 100mmx100mm of inpact resistance ABS plastic sstud having violet resistance color with plastic strip containing 31 mini retro reflective glass beads of colour white/red/yellow to each side and fixed with 12mm dia 120mm long zinc plated steel nails at the centre of cats eye of hammering comlete all as specified and directed by Engineer-incharge. Make:- Dark Eye (Model No. DA 978) or equivalent of International Wire Products/Surya Entrprises / /TATA BP Greenlitee/ Sinor Infrastructure Model No. DA-5.

S&F Rectangular Sign Board Double legged informatory Eco boards of size 900mm x 600mm fixed on single frame. The board shall be of high intensity of required colour grade retro-reflective sheeting of AVERY DENNISOX made out of 2mm thick alco bond sheet to be covered with high intensity grade retro reflective sheeting, fixed to structural steel frame work of MS pipe of size 35x35mm square pipe with nut bolt/rivets ensuring safety against removal of planted, the lettering is computerized cut of high intensity grade white and black alternative bands of 25cm each with synthetic enamel paint and fixed through PCC block (1:3:6) of size 300mmx300mmx450mm complete all specified abd directed by Engr-in-Charge.

S&F Tringular/Round Sign Board of 600mm sides/dia single legged informatory Eco boards fixed on single frame. The board shall be of high intensity of required colour grade retro-reflective sheeting of AVERY DENNISOX made out of 2mm thick alco bond sheet to be covered with high intensity grade retro reflective sheeting, fixed to structural steel frame work of MS pipe of size 35x35mm square pipe with nut bolt/rivets ensuring safety against removal of planted, the lettering is computerized cut of high intensity grade white and black alternative bands of 25cm each with synthetic enamel paint and fixed through PCC block (1:3:6) of size 300mmx300mmx450mm complete all specified and directed by Engr-in-Charge.

EXTERNAL WATER SUPPLY

Supply, laying & jointing in trenches / floor etc in standard length, centrifugally cast (spun) ductile iron (DI) pressure pipe of 100mm bore, with spigot and socket ends class K-7 conforming to IS 8329/2000 or latest revision, ISI marked with inside cement mortar lining and black bitumen external coating ,including with tyton joints & testing complete all as specified and directed by Engr -in- Charge. Note :- (i) The cost of joint deemed to be included in this quoted item rate (ii) Excavation/earth work shall be measured and paid for separately

M & L for cutting of exisitng DI pipe line upto 150 mm dia and inserting tee or tapper piece etc. as required at site for connecting of 100 mm dia DI pipe line complete all as specified and directed. Note: CI/DI special fitting required at site shall be meaured separately.

Construction of brick masonary valve pit Complete as per Chief Engineer Airforce Gandhinagar Drg No. CEAA/TD/57 sheet No.1.1, Ser No.4 Type 'D' of size 1050 x 1050 x 1000mm for Sluice / Reflex valve. Complete as specified & directed by Engr-in-charge.

EXTERNAL ELECT SUPPLY

M & L for Boring of holes under road, pavement, hard standing by Mannualy or necessary machine for inserting of GI pipe up to 80 mm dia complete all as directed and specified.

M & L for outdoor type weather proof LT street light panel with locking arrangement, made out of 2.0 mm thick CRCA sheet steel factory fabricated with powder coating with Protection Degree IP 54 including with contactor 32 A TP, time switch Digital 24 hour, MCB 40 Amp Rating including all electrical connection and testing / setting of ON/OFF time complete all as specified and directed .

Supply and fix PVC box of outside size 300mm x 200mm x 105mm including 4 Nos. of bus bar strip of aluminium of size 25x4 mm suitable for 440 volts of suitable amps rating including 1 No MCB SPN, 6 to 10 Amps, 220 volts with 'C' curve, to be fixed on pole with clamp complete all as specified and as directed.

S&F round PVC insulated standed copper conductor wire of 1.5 sqmm dia, 3 core from junction box to light fitting complete all as specified and as directed.

Supply and installed cubical compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, TTA Type, fabricated out of 3.15 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed. The panel board shall be suitable housed with the following items:- (Main LT Panel) (a) Aluminium bus bar with PVC sleeves 200 Amps capacity 3 Nos for phase, and neutral - 01 Set. (b) MCCB 125 Amps 4 Pole with thermal magnetic adjustable setting 25 KA -01 Nos (for Incoming) (c) LED Multimeter VAF+PF Class 0.5 (d) RYB phase Indicator lamp 1 set (e) MCCB 63 Amps 4 Pole with thermal magnetic adjustable setting 10 KA -03 Nos (for AOC, GP Cptn, and one spare) (f) MCCB 100 Amps 4 Pole with thermal magnetic adjustable setting 16 KA -01 Nos (Sqn Ldr Accn - 1 Nos) (g) MCB TPN 32 Amps 10 KA - 02 Nos (for Street light & one spare) (h) Digital Astronomical function time switch (suitable for Chiloda Gujarat Area) with power conductor 20 Amps, 3 Pole, 415 volts-01 Nos.

M/s SK Traders (BID ID -3426793)