Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-AOC PLOT NO 626 627 GIDC BEHIND GANGOTRI DIARY PORBANDAR 360 577 | PORBANDAR | GUJARAT | 360577 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹41.4 L+₹4.7 L (12.7%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹42.5 L+₹5.8 L (15.7%)Rejected-Finance 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹43.0 L+₹6.3 L (17.1%)Rejected-Finance KUCHHADI VADI VISTAR PORBANDAR GUJARAT 360579 | PORBANDAR | GUJARAT | 360579 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹45.4 L+₹8.7 L (23.6%)Rejected-Finance PLOT NO P PARASNAGAR NR SBI BANK NARSANG TEKRI PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
Refer Docs
EMD Value
₹76,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Prahalad Meena, Offg Garrison Engineer
GE Navy Porbandar Tija Mile Porbandar
PROVN OF COLD AND COOL ROOM AT NAVAL BASE UNDER GE NAVY PORBANDAR
2023_MES_593495_1
9170/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
Porbandar
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Garrison Engineer Navy
₹76,000
Yes
11 Jul 2023
6 May 2023
30 May 2023
6 May 2023
29 May 2023
22 May 2023
6 May 2023 - 19 May 2023
Amount
Surface dressing n.exc. 15 cm deep in hard/dense soil including cutting of bushes, sapling etc. complete all as specified and direced by Engr-in-Charge.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc. and getting out in hard/dense soil, complete all as specified and direced by Engr-in-Charge.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc. and getting out in soft/disintegrated rocks, complete all as specified and direced by Engr-in-Charge.
M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete plinth beam complete all as specified and direced by Engr-in-Charge.
M&L for Treating the AntiTermite Treatment for bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and direced by Engr-in-Charge.
M&L for Treating the AntiTermite Treatment for flooring at the rate of 7.5 litres of emulsion per square metre of surface area complete all as specified and direced by Engr-in-Charge.
M&L for Treating the AntiTermite Treatment for soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and direced by Engr-in-Charge.
M&L 75 mm thick PCC, type C-2, 1:3:6 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified and direced by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in foundations, plinth beams, bases for column etc. complete all as specified and direced by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in column etc. complete all as specified and direced by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as specified and direced by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in chajjas etc. complete all as specified and direced by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as specified and direced by Engr-in-Charge.
Returing, filling in, including spreading, levelling, watering and well reamming in layers not exc 25 cm in rocks, complete all as specified and direced by Engr-in-Charge.
Removing excavated material as rocks exc. 1.5km and n.exc 5 km depositing where directed complete all as specified and direced by Engr-in-Charge.
M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as specified and direced by Engr-in-Charge.
M&L for form work to sides of columns, square, rectangular, complete all as specified and direced by Engr-in-Charge.
M&L for formwork to chajjas,troughs and similar items including edgeson flat and finished surface complete all as specified and direced by Engr-in-Charge.
M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and direced by Engr-in-Charge.
Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping) complete all as specified and direced by Engr-in-Charge.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and direced by Engr-in-Charge.
S&F Mild steel TMT bars 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and direced by Engr-in-Charge.
M&L stone walling porbandar type block masonary in cm 1:6, brought up to courses, complete all as specified and direced by Engr-in-Charge.
M&L 20 mm thick External Plaster in CM 1:4 mixed with water proofing compound, finished even and smooth (without using extra cement) complete all as specified and direced by Engr-in-Charge.
M&L 15 mm thick Internal plastering in CM 1:6 finished even & smooth without using extra cement and applying sagol finish complete all as specified and direced by Engr-in-Charge.
M&L Internal Plastering 5 mm thick to Ceiling in CM 1:3 complete all as specified and direced by Engr-in-Charge.
Supply only water proofing compound complete all as specified and direced by Engr-in-Charge.
M&L for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and direced by Engr-in-Charge. (Note:- Polymeric membrane will be measured and paid separately)
M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/ specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 4 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non wovwn polyster fabric or weight not less 160 gms per sqm. (Note:- (i) Laying of APP based membrane shall be done by torch on method or as per manufacturers instruction. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instruction. (c) Applying two coats of reflective Bituminous aluminium paint on top of APP membrane.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and direced by Engr-in-Charge.
M & L for preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering complete all as specified and direced by Engr-in-Charge.
M & L for preparation of newly plastered surfaces of Ceiling and applying three coats of white wash complete all as specified and direced by Engr-in-Charge.
M&L for Hard core, using broken stone or boulders of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as specified and direced by Engr-in-Charge.
M&L for PCC 100 mm thick, type C-2, 1:3:6 (40mm graded aggregate) as in sub-base complete all as specified and direced by Engr-in-Charge.
S&F powder coated aluminium sliding windows/ventilator, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and direced by Engr-in-Charge.
S&F Plain solid, straight chowkats and frames of second class shard wood wrought framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and direced by Engr-in-Charge.
S&F 35mm thick, 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 3097 (Part I), kiln seasoned and chemically pressure treated complete all as specified and direced by Engr-in-Charge.
M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described over 10 cm width or grith and painting with 2 coats of synthetic enamel paint over a coat of pink primer, complete all as specified and direced by Engr-in-Charge.
S & F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and direced by Engr-in-Charge.
S & F 200mm long mild steel barrel tower bolt of extruded section and fixed, complete all as specified and direced by Engr-in-Charge.
S & F 150mm long mild steel handles cast type, complete all as specified and direced by Engr-in-Charge.
S & F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and direced by Engr-in-Charge.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and direced by Engr-in-Charge.
S&F in door closer hydraulically regulated, aluminium extruded section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and direced by Engr-in-Charge.
S&F in floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 140mm length complete all as specified and direced by Engr-in-Charge.
S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and direced by Engr-in-Charge.
S&F Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and direced by Engr-in-Charge.
S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square not exc 0.5 sq. m in each pane complete all as specified and direced by Engr-in-Charge.
S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and direced by Engr-in-Charge.
S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type anodised complete all as specified and direced by Engr-in-Charge.
S&F in 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direced by Engr-in-Charge.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and direced by Engr-in-Charge.
S&F PVC (SWR) bends any radius laid in trenches of nominal bore 75 mm complete all as specified and direced by Engr-in-Charge.
S&F PVC (SWR) junction single, (Single T) equal or unequal of nominal bore 75mm complete all as specified and direced by Engr-in-Charge.
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and direced by Engr-in-Charge.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and direced by Engr-in-Charge.
S&F PVC (SWR) branch piece, double (double Y), equal or unequal 110mm dia complete all as specified and direced by Engr-in-Charge.
M&L PVC (SWR) multifloor trap 75mm dia with grating including jointing with solvent cement complete all as specified and direced by Engr-in-Charge.
M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and direced by Engr-in-Charge.
M&L for reinforced cement concrete (Type B1 1:2:4, 20mm graded stone aggregate) Slabs supported on walls,manhole covers beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and direced by Engr-in-Charge.
M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thick M-35 grade etc complete (with grey cement and pigment) over sand cushioning complete all as specified and direced by Engr-in-Charge.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and direced by Engr-in-Charge.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in cement mortar 1:4 as in floor and skirting complete all as specified and direced by Engr-in-Charge.
Supply, installation, testing and commissioning of the walk-in-cold room inclusive of PUF panels & Refrigeration units with copper piping, cabling, electric defrost cycle and accessories etc. for Cool & Cold Room of following specifications at Porbandar complete all as specified and direced by Engr-in-Charge.
(A) General Details for Freezer Room:- (i) External Room Size - Chiller Room - in Feet - 8.71 x 7.96 x 8 (ii) Internal CFT- 390 CFT (iii) Room Temperature required -18 to -22 °C (iv) Max Ambient Temperature -45°C (B) Product Details (i) Product to be stored Fish, sea food items (2 Ton) (ii) Incoming Product Temperature +35 °C (iii) Cooling Time 24 Hours (iv) Door Openings 5-10 times per day (v) Lighting Load 2 Watts/sqmt (C) PUF Panel Details (Blue Star make) (i) Material Of Insulation Polyurethane Foam (PUF) with Cyclopentane blowing agent (ii) Density of panels 40 +/- 2 Kg/cubic meter (iii) Thickness Of Insulation for walls/Ceiling 125 mm (iv) Thickness Of Insulation for floor 60 mm (v) Lamination for Walls PP GI Sheet inside and outside (vi) Lamination for Ceiling PP GI Sheet inside and outside (vii) Lamination for floor PUF slab with tarfelt sheet on top
(D) Door Details (Blue Star make) (i) Door Clear Opening 34" x 78" (ii) Insulation Thickness 125 mm (iii) Type Of Door Hinged Door with Manual Swing (iv) Number of doors 01 Nos (v) Lamination for door PP GI Sheet inside and outside (E) Refrigeration System Details (Blue Star make) (i) Type of System Split (ii) Type of condenser Air cooled (iii) Type of compressor Hermetic (iv) Total Capacity Of Units 6000 BTU/Hr (v) No. of Units 1 No. (SS body) (vi) Refrigerant R404 a (vii) Compressor Run Time 16 – 18 hrs. if unit runs 24 Hours (viii) Electricity Power Supply 415 V/3 Ph/50 Hz (ix) Temperature indicator Digital Temperature indicator cum controller (x) Defrost Cycle -Auto Defrost
(B) General Details for Ante Room:- (i) External Room Size - Chiller Room - in Feet -4 x 7.96 x 8 (ii) Internal CFT- 157 CFT (B) Product Details (i) Fresh vegetables (ii) Incoming Product Temperature +35 °C (iii) Cooling Time 24 Hours (iv) Door Openings 5-10 times per day (v) Lighting Load 2 Watts/sqmt (C) PUF Panel Details (Blue Star make) (i) Material Of Insulation Polyurethane Foam (PUF) with Cyclopentane blowing agent (ii) Density of panels 40 +/- 2 Kg/cubic meter (iii) Thickness Of Insulation for walls/Ceiling 60 mm (iv) Thickness Of Insulation for floor 60 mm (v) Lamination for Walls PP GI Sheet inside and outside (vi) Lamination for Ceiling PP GI Sheet inside and outside (vii) Lamination for floor PUF slab with tarfelt sheet on top (D) Door Details (Blue Star make) (i) Door Clear Opening 34" x 78" (ii) Insulation Thickness 60 mm (iii) Type Of Door Hinged Door with Manual Swing (iv) Number of doors 01 Nos (v) Lamination for door PP GI Sheet inside and outside
(C) General Details for Vegetable Chiller Room:- (i) External Room Size - Chiller Room - in Feet - 13.5 x 8.71 x 8 (ii) Internal CFT- 791 CFT (iii) Room Temperature required +2 to +8 °C (iv) Max Ambient Temperature -45°C (B) Product Details (i) Product to be stored Fresh vegetables (4 Ton) (ii) Incoming Product Temperature +35 °C (iii) Cooling Time 24 Hours (iv) Door Openings 5-10 times per day (v) Lighting Load 2 Watts/sqmt (C) PUF Panel Details (Blue Star make) (i) Material Of Insulation Polyurethane Foam (PUF) with Cyclopentane blowing agent (ii) Density of panels 40 +/- 2 Kg/cubic meter (iii) Thickness Of Insulation for walls/Ceiling 60 mm (iv) Thickness Of Insulation for floor 60 mm (v) Lamination for Walls PP GI Sheet inside and outside (vi) Lamination for Ceiling PP GI Sheet inside and outside (vii) Lamination for floor PUF slab with tarfelt sheet on top (D) Door Details (Blue Star make) (i) Door Clear Opening 34" x 78" (ii) Insulation Thickness 60mm (iii) Type Of Door Hinged Door with Manual Swing (iv) Number of doors 01 Nos (v) Lamination for door PP GI Sheet inside and outside
(E) Refrigeration System Details (Blue Star make) (i) Type of System Split (ii) Type of condenser Air cooled (iii) Type of compressor Hermetic (iv) Total Capacity Of Units 10000 BTU/Hr (v) No. of Units 1 No. (SS body) (vi) Refrigerant R404 a (vii) Compressor Run Time 16 – 18 hrs. if unit runs 24 Hours (viii) Electricity Power Supply 230 V/1 Ph/50 Hz (ix) Temperature indicator Digital Temperature indicator cum controller (x) Defrost Cycle -Auto Defrost. Note : 1. Design details of plants to be submitted for approval before execution of work through Enineer-in-Charge for approval of Accepting Officer. 2. The work is to be carried out only through specialist agency i.e. Carrier /Voltas / Bluestar as this is specialized work.
S& F of XLPE insulated armoured and pvc sheated heavy duty electric cable, 3.5 core 50 Sqmm cross sectional area, aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete all as specified and direced by Engr-in-Charge.
Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested complete all as specified and direced by Engr-in-Charge.
Removing excavated surplus soil (Soft/hard soil) obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and direced by Engr-in-Charge.
S& F in replacement of laying of Double Walled Corrugated (DWC) HDPE pipe of size 50/38 mm outer/inner dia of conforming to IS 16205 Part -24 including necessary bends, coupling, tees, reducers, spacers, end caps, rubber rings etc having pressure rating not less than 450 N through trenches / wall / floor / on pole in any type of soil for protection of electric cable complete all as specified and direced by Engr-in-Charge.
S & F MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar, neutral link, IP-43-IK09 protection grade ,Glazed door 415 Volts TPN with 4 way Double door complete all as specified and direced by Engr-in-Charge.
S & F MCCB TPN 100 Amps, 415Volts, 16 KA complete all as specified and direced by Engr-in-Charge.
S & F MCB TP 415 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and direced by Engr-in-Charge.
S & F in replacement MCB SP 240 Volts 'C' series, breaking capacity 10 KA of rating 6-32 Amps complete all as specified and direced by Engr-in-Charge.
Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of 1991 (part-I) complete all as specified and direced by Engr-in-Charge.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 20 Amps complete all as specified and direced by Engr-in-Charge.
Supply and fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps complete all as specified and direced by Engr-in-Charge.
S & f sub main wiring of size 4 sq mm 2 core (FRLS) along with earth wire of 4 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC casing caping of suitable size complete all as specified and direced by Engr-in-Charge.
S & F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 4 Single core of size 10 Sqmm, earth continuity conductor of size 1X 10 Sqmm to be drawn through and including PVC casing caping/PVC Conduit not less then 32mm dia medium Grade complete all as specified and direced by Engr-in-Charge. Notes:- (i) four wires of 10 sqmm and one wire of 10 sqmm and one run of PVC conduit /casing caping shall be measured as one unit.
S & F of LED tube light fittings 4 feet 1x20 Watt ,220V, AC decorative box type with driver,Upto 4 KV Surge protetction ,holder including LED Tube light connecting up with flexible copper conductor cable with suitable size from ceiling rose complete all as specified and direced by Engr-in-Charge.
M & L for Point wiring with PVC insulated unsheathed stranded copper conductor cable FRLSH of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width /concealed with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
S & F Modular switch 1 way 6A, 1 module complete all as specified and direced by Engr-in-Charge.
S & F Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified and direced by Engr-in-Charge.
Leo Elevator Company
ALBA AC AND REF SERVICES
JAY BHARAT METAL SUPPLIERS
AADESH CONSTRUCTION
Nitesh Enterprise
shree chamunda enterprise
SANVI ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .