Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.6 LAccepted-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹23.4 L+₹49,134.39 (2.15%)Rejected-AOC 34 10 37 1 GNANAPURAM DAYAS STREET VISAKHAPATNAM VISAKHAPATNAM ANDHRA PRADESH 530004 | VISAKHAPATANAM | ANDHRA PRADESH | 530004 | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹24.7 L+₹1.8 L (7.94%)Rejected-AOC | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹25.7 L+₹2.8 L (12.4%)Rejected-AOC | L4 | Rejected-AOC Not being L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
COMPREHENSIVE MAINTENENCE WORKS OF CERTAIN MINOR UNITS UNDER AGE BR II OF GE ND VISAKHAPATNAM
2023_MES_588732_1
8255GEND
Open Tender
Civil Works
Item Rate
240 days
Visakhapatnam
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ND VIZAG
₹60,000
13 Jul 2023
10 Apr 2023
13 May 2023
10 Apr 2023
8 May 2023
24 Apr 2023
Amount
The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to vist the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M & L for 25 mm thick PCC 1:2:4, type B-O, using 12.5mm graded crushed stone aggregate finished fair and even etc complete all as specified and directed
S&F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed.
M&L for Virified Ceramic tiles Dark shade , 8 - 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over and including 15 mm thick cement screed bed in cm 1:4 complete all as specified and as directed.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including Screed bed or bedding layer of cement mortar (1:4) 15 mm thick for laying floor finishes complete all as specified and as directed.
M&L for Non - skid coloured ceramic riser tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in staircase etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) as rough surface on vertical surfaces as backing coat of wall tiles complete all as specified and as directed.
Taking down chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.
Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed
Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.
S&F 2nd class hard wood as in plain straight chowkat and frames wrought framed rebeared on the solid rounded or charmfered but together with glue pinned at joints,etc complete all as specified and as directed
M & L for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing 2nd class Hard wood factory made 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.
Supply and fixing 2nd class hard wood Factory made 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats.complete all as specified and directed.
Supply and fixing factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.
S&F for anodised alumnium door using 96.6mm X44.8mm X 1.5 mm aluminium chowkhats,84.0X44.7mmX1.5mm section vertical styles and 101.60X44.88X1.5mm rails mounted 04 Nos SS butt hinges 100 for each shutter with mortice lock six lever vertical tye mild steel 100mm size (make Godrej/Harrison) 02 Nos tower bolt 159mm,sliding bolt 300mm long 01 No 200mm 2 Nos door handle and fittings complete all as specified and directed by Engr-in-charge bottom panel and top panel fixed with snap beading rubber of suitable size.
S&F for anodised three track aluminim sliding window and ventilator frame made up 62 mm /29.5mm 1.5 mm thick aluminium section & shutter made pu 38mm/20mm/1.5mm thick without sash bar aluminium section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings ,suitable alumn handle and locking arrangment etc acomplete all as specified and directed
Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including Powder Coated Aluminium Channel of size 20 X 12 X 1.5mm for fixing Deco Grill complete all as specified and as directed.
Easing of door shuttrs window shutters kitchen cupboard shutters show case shutter drawers incl fixing of screws for easy closing / operning and tightening of hinges or changing the position of hinges adjustment of tower bolts with new screws etc complete all as specified and directed.
S&F for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.
S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.
S & F in repair aluminium body door closer hydraucally regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed
M & L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed
M/L for taking down and refixing the same existing aluminium door shutters for carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling as required each shutter area not exc 4 Sqm. complete all as required and as directed
Supply & fixing for frosted glass / tined glass 4.8 mm thick glazing in aluminium frames and ms pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed
Supply & fixing Sheet glass 4mm thick,ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each complete all as specified and directed.
S & F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F for drapery rods (curtain rods) of 25 mm outer diameter, designed on electric resistance welded mild steel pipe having a corrugated virgin PVC extrusions reinforced to minimize friction and eliminate scratches with colour matching brackets and finials etc. of approved colour /shade/design wherever necessary with anchoring arrangements complete all as specified and as directed. Note:- The quoted rate shall be deemed to be inclusive of all necessary Brackets as required at site.
S&F for butt hinges 75 mm long medium weight, cold rolled stainless steel complete all as specified and directed.
S&F in repairs butt hinges of 75 mm size cold rolled stainless steel medium weight, ISI marked complete all as specified and directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply and fixing 125 mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
Supply and fixing in repairs 125 mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S&F butt hinges 100 mm long medium weight, cold rolled stainless steel complete all as specified and directed.
S&F in repairs SS butt hinges of 100 mm size cold rolled stainless steel medium weight, ISI marked complete all as specified and directed.
S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S & F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Supply and fixing 200 mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.
Supply and fixing in repairs 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.
S & F for 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
S & F in repairs 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
Supply and fixing in repairs 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
Demolition of cement concrete in reinforcement and in any position not otherwise specifically provided complete all as specified and directed.
M&L for Granite (of any type) tiles 18-20mm thick machine cut, in , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed in cement sand mortar 1:4 including rounding and moulding to all exposed edges complete all as specifed and directed EIC.
Demolition Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed
Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified and directed.
Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% of weight of cement complete all as specified and directed. Note :Water proofing compound shall be measured and paid separately
Supply only integral water proofing compound complete all as specified and directed.
M&L for rendering 5 mm thick in CM (1:3) on ceiling sufaces, finished even & smooth without using extra cement , complete all as specified and directed.
M & L for Cutting / Chipping the spalled loose concrete of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Zinc rich epoxy primer to all steel surfaces as antirust agent and welding steel wire Fabric / Mesh of aperture 75mm and 2mm dia of wire to existing reinforcement, applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd as per manufacturer's instructions and providing pressure Guniting up to 40 mm and averaging 25mm thick at a pressure of not less than 6 KG / Sqcm in CM 1:3 duly mixing the mortar with and including polycrete admixture of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 2% of weight of cement, finishing the surface rough and finally rendering with 15 mm thick in CM 1:4 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics to match with the existing surface including providing double scaffolding and safety measures as required and removal of the same on completion and disposal of demolished materials / debris outside MD land complete all as specified and as directed. Note:-The work will be carried out through authorized manufacturer and contractor will have to submit all necessary documents for the same
prepration of newly plastered wall surfaces by using vaccume based hand held or long handle sander machine and applying two coats of distemper oil emulsion (Oil bound washable distemper)over and including 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces by using auto roller or airless sprayer machine complete all as specified and directed.
Complete removal of existing treatment and prepration of old decorated wall surfaces by using vaccume based hand held or long handle sander machine and applying two coats of distemper oil emulsion (Oil bound washable distemper)over and including 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces by using auto roller or airless sprayer machine complete all as specified and directed.
prepration of old decorated wall surfaces by using vaccume based hand held or long handle sander machine and applying one coat of distemper oil emulsion (Oil bound washable distemper) by using auto roller or airless sprayer machine complete all as specified and directed.
prepration of old decorated ceiling surfaces by using vaccume based hand held or long handle sander machine and applying one coat of distemper oil emulsion (Oil bound washable distemper) by using auto roller or airless sprayer machine complete all as specified and directed.
prepration of newly plastered ceiling surfaces by using vaccume based hand held or long handle sander machine and applying three coats of white wash by using auto roller, complete all as specified and directed
prepration of old decorated ceiling surfaces by using vaccume based hand held or long handle sander machine and applying one coat of white wash by using auto roller, complete all as specified and directed
prepration of old decorated wall surfaces by using vaccume based hand held or long handle sander machine and applying one coat of white wash by using auto roller, complete all as specified and directed
Prepration of newly plastered wall surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) by using auto roller or airless sprayer machine over a coat of primer complete all as specified and directed
Prepration of old decorated wall surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying one coat of exterior weather proof (100% acryllic paint) by using auto roller or airless sprayer machine complete all as specified and directed
Preparing old surfaces of walls by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying one coat of cement based paint by using auto roller or airless sprayer machine complete all as specified and directed .
M & L for preparing old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and directed
M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coats of synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and directed .
M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer by using auto roller or airless sprayer machine complete all as specified and directed
M & L for preparation new or prevously untreated surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer by using auto roller or airless sprayer machine complete all as specified and directed
Supply, Fabrication and Fixing of 4 mm thick Exterior aluminum composite panels (ACP) as in wall paneling, facia of roof, porch, etc in panels of different colours as approved by GE, fixed with aluminium frame work with aluminium section of size 25mm x 38mm and with screws, joints sealed with silicon tape, glazing tape etc., complete all as specified and directed.
Supply and fixing in position suspended false ceiling using GI exposed ceiling suspension system of grid size 600mm x 600mm with main runner 38x24mm (0.25mm thick) of central black line / black groove, Cross Tee 27mmx24mm(0.25mm thick) of central black line / black groove and Angle 22mm x 24mm (0.4mm thick) & including Supply and fixing 4mm thick (high pressure stream cured) pre-painted self-embossed, reinforced designer cement board (Ivory) with texture of size 595 x 595mm including conforming to IS 14862-2000 to be placed in a grid of GI system duly suspended with 4 mm dia galvanized iron /mild steel bar hanger fixed with steel dash fastener or iron purlins from the roof with adjustment clip. The main runner to be secured to structural soffit by hanger @ 1200mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1200mm cross tee to be interlocked between main runner @600mm C/C, so as to firm 600mm x 600mm grid etc., including demolition of old false ceiling including frame work complete all as specified and directed.
S&F 5 mm thick solid PVC wall lining consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling old wall panelling complete alll as specified and directed
S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall complete all as specified and directed
Removing the existing roof treatment completely and roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc then Brushing neat cement slurry with 3 Kg of cement per Sqm,then Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC @ 3% of weight of cement and finished even and fair without using extra cement then supplying testing and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including coating the APP membrane surface with water based bituminous primer of blow bitumen of 85/25 at 1.2 Kg/Sqm both at bottom and top of the membrance (Three layers of bitumen primer one on plastered surface and two on APP membrane) and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified and directed. Notes:- (a)The Roof treatment work shall be carried out through the original manufacturer or his authorized applicator only , Contractor will have to submit all necessary documents like Purchase Vouchers, test Certificates, Authorization letter of manufacturer, etc before payment of RAR. (b) Contractor will have to submit a written guarantee for water proofing treatment for a period of 10 years on a stamp paper of Rs 100 . (c) Contractor will have to deposit a FDR for a Sum equal to 3% of Total Cost of water proofing Treatment before issue of final completion of work failing which the sum shall be deducted from his RARs/Final Bill.
S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) EWC white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.
S&F in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580xmmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and directed.
S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.
S &F in repairs Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws complete all as specified and directed
S&F in repairs for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe complete all as specified and directed
S&F in repairs 32mm PVC pipe for waste fitting,brass , CP for glazed ware sinks,basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S & F in repairs 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repairs PVC 10 litres capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and directed.
S&F in repairs 15mm dia PVC connection pipe with PTMT nuts of length 450mm all as directed incl taking down old one complete all as specified and directed.
S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms) complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks two layered (ISI Marked) 1000 litres capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tanks complete all as specified and directed
S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.
S&F in repairs 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed
S&F in repairs stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets andover all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete as specified and directed.
Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
Supply, laying and Testing for 16mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed.
Supply and laying for 20mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed.
Supply and laying for 25mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed.
Taking down eaves gutters & rain water pipes ( any size or pattern) including all fittings , heads, shoes , bends, swan- necks, etc including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings & accessories) complete all as specified and directed .
S&F 110 mm dia PVC (SWR) pipes single socketed in any length , with rubber ring joints fixed in walls complete all as specified and directed.
S&F 110 mm dia bore PVC (SWR) bends complete all as specified and directed .
S&F 110 mm PVC (SWR) junction single(Single T) equal or unequal with access doors complete all as specified and directed.
S&F 110 mm PVC (SWR) vent cowl complete all as specified and directed
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed
S&F 75 mm dia of PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as specified and directed.
S&F 75 mm size PVC(SWR) bends any radius complete all as specified and directed
S&F 75 mm PVC (SWR) junction single(Single T) equal or unequal with access doors complete all as specified and directed.
Demolition of cement concrete in Sunken floors and provision of 75 mm thick PCC (1:1 1/2:3) type A-O using 12.50 mm graded crushed stone aggregate with and including integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout and providing 15 mm thick plastering on vertical sides in CM (1:3) mixed with and including water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green ie . PCC & Plaster be carried out at the same time , Applying two coats of Dr fixit epoxy compound (or equivalent in other makes as given in list of makes ) after laying sewage / plumbing pipes with fixtures in position and filling the sunken floor with 50 mm thick PCC ( 1:5:10) type E-2 using crushed stone aggregate over the treated surface including provision of Spouts of 50mm dia GI pipe light grade projecting 450mm clear of face outer wall with mosquito proof cap on inner face of pipe to drain out seepage water ,including cutting holes and making good if needed complete all as specified and directed. NOTE:- The water Proofing treatment shall be tested after application of Dr fixit epoxy compound and before filling of PCC 1:5:10 by filling the same with water and testing continuously for 72 hours for any leakage and dampness etc and further work shall be allowed only after successful testing in presence of Engineer-in-charge
Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.
S&F Roof trusses (framed) trussed purlines, crane gantries, rails and fastenings and heavy brackets framing (beam, Tee, angle, channel or flat sections)of Fe-410-W(Gde-E-250) quality B including distance pieces, cleats etc complete all as specified and directed.
S&F in repairs pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and a directed .
M&L for Excavation for post holes (or similar holes) each not exceeding 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for soft / loose soil complete all as specified and directed.
M&L for plain Cement Concrete type C2 1:3:6 ( using 40mm graded crushed stone aggregate) as in foundation filling or in mass concrete complete all as specified and directed.
S & F in repairs framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of grade Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever equired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
S & F 18 mm thick Wood Plastic Composite (WPC) boards with one side decorative lamination & other side balancing lamination fabricated using adhesive and all required brackets, screws etc. as in shutters including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer instructions complete all as specified and as directed.
S & F 18 mm thick Wood Plastic Composite (WPC) boards, plain white fabricated using adhesive and all required brackets, screws etc. solid board plain, for shelf / partition including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer instructions as specified and as directed.
Supply and fixing in repairs for 100mm size Aluminium handles, cast type,anodised,ISI marked complete all as specified and directed.
Supply and fixing in repair 100mm size Aluminium handles, cast type,anodised,ISI marked complete all as specified and directed.
S&F in repairs for 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified.
S&F in repair 125 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified.
S & F for 100mm size aluminium anodised,barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
S & F in repair 125 mm size aluminium anodised,barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
S & F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as specified and directed
S&F for magnetic PVC catcher for kitchen/shelve cup board complete all as specified and directed
M&L uprooting of tree from walls of bldgs up to extranded root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1(1:3:6) using 20mm graded aggregate including necessary scafolding complete for tree of girth up to 5 to 10 CM complete all as specified and directed
aswitha engineering works
K NAGARAJU
VENKATA SHIVA RAJENDRA PRASAD ARAVALA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .