Interior Works at Param Science, Innovation, History and Cultural center of Janseva trust at Magadi Road, Bengaluru under Power Finance Corporation CSR initiative

Providing and laying C.C. pavement of mix M-25 with ready

mixed concrete from batching plant. The ready mixed concrete

shall be laid and finished with screed board vibrator , vacuum

dewatering process and finally finished by floating, brooming

with wire brush etc. complete as per specifications and directions

of Engineer-incharge at all levels. - 100mm Thick (Note:-

Cement content considered in this item is @ 330

kg/cum.Excess/less cement used as per design mix is payable/

recoverable separately). at all levels For Communication

Room & Digital Server Room

18mm Thick Polished Granite Skirting -

Stone tile (polished) work for wall lining / Skirting over 12 mm

thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

cement slurry @ 3.3 kg/sqm including pointing in white cement

1 8.9.1.2 and half nosing of 6mmx6mm, Polishing, etc., complete. - -

Granite of any colour and shade for Skirting. - For Micro

Topping & VDF Flooring Area

FALSE CEILING WORKS -

GYPSUM BOARD FALSE CEILING : PLAIN -

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat fixed to the

angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling

2 section 0.5 mm thick bottom wedge of 80 mm with tapered -

flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of 2.64

mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel

with the help of dry wall screws of size 3.5 x 25mm at 230 mm

including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two

coats of primer suitable for board, all as per manufacturer's

specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but

excluding the cost of painting with : - 12.5 mm thick tapered

edge gypsum plain board conforming to IS: 2095- (Part I) :2011

(Board with BIS certification marks) - CABINS, VIP ROOM,

PANTRY, POWDER ROOM & LED DIS., Merchandise Room

Digitally signed by DEEPAK

SAPL - P. No. 1 KUMAR MEHRA

Sl. DSR INDEX

DSR Item/NS Item Description Unit Quantity AMOUNT

No. RATES @17.42% and

2 CALCIUM SILICATE BOARD CEILING : -

Providing and Fixing 15 mm thick densified tegular edged eco

friendly light weight calcium silicate false ceiling tiles of approved

texture of size 595 x 595 mm in true horizontal level, suspended

on inter locking metal grid of hot dipped galvanised steel

sections (galvanising @ 120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get

required length and of size 24x38 mm made from 0.33 mm thick

(minimum) sheet, spaced 1200 mm centre to centre, and cross

“T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet,

1200 mm long spaced between main’T’ at 600 mm centre to

centre to form a grid of 1200x600 mm and secondary cross ‘T’ of

length 600 mm and size 24 x28 mm made of 0.33 mm thick

(Minimum) sheet to be inter locked at middle of the 1200x 600

mm panel to from grid of size 600x600 mm, resting on periphery

1 12.53 walls /partitions on a Perimeter wall angle pre-coated steel of -

size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet

with the help of rawl plugs at 450 mm centre to centre with 25

mm long dry wall screws @ 230 mm interval and laying 15 mm

thick densified edges calicum silicate ceiling tiles of approved

texture in the grid, including, cutting/ making opening for

services like diffusers, grills, light fittings, fixtures, smoke

detectors etc., wherever required. Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size

25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm

long dash fasteners, 4 mm G.I. adjustable rods with galvanised

steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm

centre to centre along main ‘T’, bottom exposed with 24mm of

all Tsections shall be pre-painted with polyster baked paint,for all

heights, as per specifications, drawings and as directed

byEngineer-in-Charge.

Note :- The calcium silicate ceiling tile shall have NRC value of

(Minimum), light reflection > 85%, non- combustible as per B.S.

476 part IV, 100% humidity resistance and also having thermal

conductivity <0.043 w/mK.

CODE: CALCIUM BOARD FALSE CEILING (TYPE-F)

CODE: CALCIUM BOARD FALSE CEILING (TYPE-F)

CODE: CALCIUM BOARD FALSE CEILING (TYPE-F)

CODE: CALCIUM BOARD FALSE CEILING (TYPE-C)

2 CALCIUM SILICATE BOARD CEILING : -

Providing and Fixing 15 mm thick densified tegular edged eco

friendly light weight calcium silicate false ceiling tiles of approved

texture of size 595 x 595 mm in true horizontal level, suspended

on inter locking metal grid of hot dipped galvanised steel

sections (galvanising @ 120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get

required length and of size 24x38 mm made from 0.33 mm thick

(minimum) sheet, spaced 1200 mm centre to centre, and cross

“T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet,

1200 mm long spaced between main’T’ at 600 mm centre to

centre to form a grid of 1200x600 mm and secondary cross ‘T’ of

length 600 mm and size 24 x28 mm made of 0.33 mm thick

(Minimum) sheet to be inter locked at middle of the 1200x 600

mm panel to from grid of size 600x600 mm, resting on periphery

walls /partitions on a Perimeter wall angle pre-coated steel of

12.53 size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet -

with the help of rawl plugs at 450 mm centre to centre with 25

mm long dry wall screws @ 230 mm interval and laying 15 mm

thick densified edges calicum silicate ceiling tiles of approved

texture in the grid, including, cutting/ making opening for

services like diffusers, grills, light fittings, fixtures, smoke

detectors etc., wherever required. Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size

25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm

long dash fasteners, 4 mm G.I. adjustable rods with galvanised

steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm

centre to centre along main ‘T’, bottom exposed with 24mm of

all Tsections shall be pre-painted with polyster baked paint,for all

heights, as per specifications, drawings and as directed

byEngineer-in-Charge.

Note :-The calcium silicate ceiling tile shall have NRC value of

0.50 (Minimum), light reflection > 85%, non- combustible as per

476 part IV, 100% humidity resistance and also having thermal

conductivity <0.043 w/mK.

1 TEXTURE PAINTING: -

Finishing walls with textured interior paint of required shade

:New work (Two coats applied @ 3.28 L/10 m²) over and

including priming coat of interior primer applied @ 2.20kg/10 m²

to give an even shade after thoroughly brooming the surface to

remove all dirt, dust, mortar drops and foreign matter including

13.45.1 preparing the surface even and sand paper smooth, cost of -

materials, labour, HOM, Providing and removal of scaffolding,

loading and unloading, lead and lift, incidental charges, etc.,

complete as per specifications and as per directions of Engineer-

2 INTERNAL CEILING PAINT -

Note : LOW VOC Paints to be Used, certificate from the paint

Manufacturer to be produced as proof.

Digitally signed by DEEPAK

SAPL - P. No. 2 KUMAR MEHRA

Sl. DSR INDEX

DSR Item/NS Item Description Unit Quantity AMOUNT

No. RATES @17.42% and

Providing and applying Acrylic Emulsion (Premium) paint of

approved make and colour conforming to IS in two coats

(surface and finish acceptable to the Engineer in charge. must

be achieved by the contractor and any additional coats if

required shall be at the cost of the contractor); including

preparing surfaces, filling up with Approved Putty / gypsum or

approved crack filler, binder; cleaning and making the surface

dust-free, applying a sealer or primer coat of paint as

recommended by approved paint manufacturer, applying first

coat of paint (of approved make and shade) then Touchup putty

works to be done to cover up any level differences and then Final

Coat of Paint to be done after approval form the Engineer in

charge. the Rate quoted to be inclusive of required scaffolding,

cleaning and protecting till the handing over of site to the

employer Etc., all complete to entire satisfaction of the Engineer

in charge. (Location: Internal walls & Ceilings) (Roller Finish)

Colour/Shade to be Approved by EIC before starting the work.

Internal Ceiling Paint: (1 coat of primer, 2 coats of

putty, 1 coat of primer, 2 coats of paints) : Acrylic plastic

emulsion paint, smooth matt finish.

3 INTERNAL WALL PAINT -

Note : LOW VOC Paints to be Used, certificate from the paint

Manufacturer to be produced as proof.

Providing and applying Acrylic Emulsion ( Premium) paint of

approved make and colour conforming to IS in two coats

(surface and finish acceptable to the Engineer in charge. must

be achieved by the contractor and any additional coats if

required shall be at the cost of the contractor); including

preparing surfaces, filling up with Approved Putty / gypsum or

approved crack filler, binder; cleaning and making the surface

dust-free, applying a sealer or primer coat of paint as

DSR 2023 / recommended by approved paint manufacturer, applying first

Vol. 1 / coat of paint (of approved make and shade) then Touchup putty -

13.83.2 / P - works to be done to cover up any level differences and then Final

223 Coat of Paint to be done after approval form the Engineer in

charge. the Rate quoted to be inclusive of required scaffolding,

cleaning and protecting till the handing over of site to the

employer Etc., all complete to entire satisfaction of the Engineer

in charge. (Location: Internal walls & Ceilings) (Roller Finish)

Colour/Shade to be Approved by EIC before starting the work.

Internal WALL Paint: (1 coat of primer, 2 coats of putty, 1

coat of primer, 2 coats of paints) : Acrylic plastic emulsion

paint, smooth matt finish.

3 PAINT FINISH - PIGEON GREY (Wall Painting) -

Digitally signed by DEEPAK

SAPL - P. No. 3 KUMAR MEHRA

PROJECT : JST PARAM SCIENCE & CULTURE CENTRE

CLIENT : JST & PARAM FOUNDATION

TITLE : BOQ FOR CIVIL FINISHES & INTERIOR

DSR Item/NS Item Description Unit Quantity AMOUNT

1 MICRO TOPPING FLOORING SYSTEM:

Providing and applying a 3mm Thick Micro Topping Flooring

System with Natural mineral, texture of Retro finish over a

prepared concrete surface having a minimum compressive

strength of 25 N/mm² and pull-off strength of 1.5 N/mm², with

surface undulation not exceeding 5 mm over a 10 m span, to

achieve a polished concrete sheen finish as per the

manufacturer’s specifications. The surface shall be mechanically

prepared by abrasive blasting and/or grinding to remove loose

particles, cement laitance, grease, oil, contaminants, and weak

concrete; all embedded or exposed metal shall be removed.

Application shall be carried out at an ambient temperature of

17°C to 25°C and relative humidity not exceeding 70%. The

completed system shall achieve a compressive strength of 48

MPa, flexural strength of 7.8 MPa, and bonding strength of 1.5

MPa. The Over all coat is of 3mm thick which includes below

mentioned steps.

The First Step is Foundation Coat, of three-component hybrid

nanotechnology polymer, of approximately 0.200 mm

thickness, mixed in the ratio 2.5:1:DL, shall be applied to

penetrate and anchor into the concrete micro-porosity. Floor

repairs shall be carried out using PolyGH-96 & 2 mm thick three-

component pre weighed set, mixed in the ratio 2.5:7:DL using a

high-speed stirrer, shall be poured, trowel-spread, and levelled

to obtain a uniform surface.

Irregularities and porosities shall be encapsulated using a 0.15 -

0.20mm Thk. three-component resin and hardener encapsulate

coat with moisture-scavenger aggregates in the ratio

1:1:10–20%, followed by application of a four-component

sealer coat of 0.18–0.20 mm thickness, mechanically mixed and

applied by trowel and roller. Finally, a two-component water-

based polyurethane pre-final coat (AR-24) followed by a final

top coat of the same system, each of 0.10–0.20 mm thickness,

shall be applied by roller, allowing 8–12 hours between coats

and restricting heavy loads for 24 hours, to provide excellent

abrasion resistance, UV stability, and long-term durability.

MICROTOPPING SKIRTING:

Providing and applying 3mm Thick MICROTOPPING

SKIRTING using a two-component system:

Providing and applying 3mm thick Micro Topping Skirting

System with natural mineral retro texture finish over prepared

concrete/plastered vertical surface of height as shown in

drawings, having minimum substrate compressive strength of

25 N/mm² and pull-off strength of 1.5 N/mm², to achieve

seamless polished concrete sheen finish as per manufacturer’s

specifications. The surface shall be mechanically prepared by

grinding/abrasive treatment to remove laitance, grease, oil,

contaminants, loose particles and weak material, including

treatment of cracks, undulations and surface imperfections. The

system shall comprise application of a three-component hybrid

nanotechnology polymer foundation coat of approximately 0.20

NS mm thickness to penetrate and anchor into the substrate micro-

porosity, followed by repair and levelling using PolyGH-96 or

approved equivalent three-component pre-weighed repair

system of approximately 2 mm thickness, mechanically mixed

and trowel applied to obtain a smooth and uniform surface.

Irregularities and porosities shall be sealed using a three-

component encapsulation resin coat of 0.15–0.20 mm thickness

with moisture-scavenger aggregates, followed by application of

a four-component sealer coat of 0.18–0.20 mm thickness by

roller/trowel application.

Finally, applying one pre-final and one final coat of water-based

polyurethane protective coating (AR-24 or equivalent), each of

0.10–0.20 mm thickness, with required curing interval between

coats, complete to provide abrasion resistance, UV stability,

stain resistance and long-term durability, including edge

finishing, corner treatment, scaffolding, protection during

curing, all materials, labour, machinery, tools and consumables

complete as per approved method statement, manufacturer’s

specifications, relevant IS shades and direction of Engineer-in-

Ground Floor Rmt 202.00 1051.38 212378.76

Second Floor Rmt 326.00 1051.38 342749.88

Digitally signed by DEEPAK

SAPL - P. No. 1 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

6mm Thick ANTI SKID EPOXY FLOORING: For AHU

Rooms & Supply & Maintainance Room

6mm Thick ANTI SKID EPOXY FLOORING:

a) by substrate shall be thoroughly mechanically grided and

cleaned to remove the existing impurities and ensure a rough

profile for subsequent coating including repairing potholes and

craters with epoxy mortar.

b) by applying approved brand Epoxy primer on the

prepared floor @0.20mm thicknes and allowed dry for 12-18

c) by applying evenly mixed 4.50 mm thick underlay coat /

NS Screed of approved make Self levelling Epoxy on prepared

surface and allowing it to dry for 12 to 14 hours.

d). by applying 0.30mm approved make Epoxy Sealer coat

before applying final coat.

d) by applying a Top Coat of Anti skid epoxy of approved

colour to achieve a thickness of 1.00 mm and allowed to dry.

e)The finished floor should be left for curing for a minimum 24

hours before bare foot traffic is allowed.

Ground Floor Sqm 62.00 8732.00 541384.00

Second Floor Sqm 64.00 8732.00 558848.00

Third Floor Sqm 64.00 8732.00 558848.00

6mm Thick ANTI SKID EPOXY SKIRTING: For AHU

Rooms & Supply & Maintainance Room

6mm Thick ANTI SKID EPOXY SKIRTING:

a) by substrate shall be thoroughly mechanically grided and

cleaned to remove the existing impurities and ensure a rough

profile for subsequent coating including repairing potholes and

craters with epoxy mortar.

b) by applying approved brand Epoxy primer on the

prepared surface @0.20mm thicknes and allowed dry for 12-18

c) by applying evenly mixed 4.50 mm thick underlay coat /

NS Screed of approved make Self levelling Epoxy on prepared

surface and allowing it to dry for 12 to 14 hours.

d). by applying 0.30mm approved make Epoxy Sealer coat

before applying final coat.

d) by applying a Top Coat of Anti skid epoxy of approved

colour to achieve a thickness of 1.00 mm and allowed to dry.

e)The finished floor should be left for curing for a minimum 24

hours before bare foot traffic is allowed.

Ground Floor Rmt 58.00 970.55 56291.90

First Floor Rmt 98.00 970.55 95113.90

Second Floor Rmt 56.00 970.55 54350.80

Third Floor Rmt 56.00 970.55 54350.80

4mm Thick FIRE RETARDANT ESD EPOXY FLOORING:

For Electrical Room

4mm Thick FIRE RETARDANT EPOXY FLOORING:

a) by substrate shall be thoroughly mechanically grided and

cleaned to remove the existing impurities and ensure a rough

profile for subsequent coating including repairing potholes and

craters with epoxy mortar.

b) by applying approved brand Epoxy primer on the

prepared floor @0.20mm thicknes and allowed dry for 12-18

c) by applying evenly mixed 2.50 mm thick underlay coat /

NS Screed of approved make Self levelling Epoxy on

prepared surface and allowing it to dry for 12 to 14 hours.

d). by applying 0.30mm Epoxy Sealer coat before applying

d) by applying a Top Coat of Anti skid epoxy of approved

colour to achieve a thickness of 1.00 mm and allowed to dry.

e)The finished floor should be left for curing for a minimum 24

hours before bare foot traffic is allowed.

Ground Floor Sqm 14.00 8260.00 115640.00

First Floor Sqm 72.00 8260.00 594720.00

Second Floor Sqm 72.00 8260.00 594720.00

Third Floor Sqm 72.00 8260.00 594720.00

4mm Thick FIRE RETARDANT ESD EPOXY SKIRTING:

For Electrical Room

Digitally signed by DEEPAK

SAPL - P. No. 2 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

4mm Thick FIRE RETARDANT EPOXY SKIRTING:

a) by substrate shall be thoroughly mechanically grided and

cleaned to remove the existing impurities and ensure a rough

profile for subsequent coating including repairing potholes and

craters with epoxy mortar.

b) by applying approved brand Epoxy primer on the

prepared floor @0.20mm thicknes and allowed dry for 12-18

c) by applying evenly mixed 2.50 mm thick underlay coat /

NS Screed of approved make Self levelling Epoxy on prepared

surface and allowing it to dry for 12 to 14 hours.

d). by applying 0.30mm Epoxy Sealer coat before applying

d) by applying a Top Coat of Anti skid epoxy of approved

colour to achieve a thickness of 1.00 mm and allowed to dry.

e)The finished floor should be left for curing for a minimum 24

hours before bare foot traffic is allowed.

Ground Floor Rmt 22.00 911.55 20054.10

First Floor Rmt 56.00 911.55 51046.80

Second Floor Rmt 56.00 911.55 51046.80

Third Floor Rmt 56.00 911.55 51046.80

2mm Thick FIRE RETARDANT ESD EPOXY FLOORING:

For Supply & Maintance Room

2mm Thick FIRE RETARDANT EPOXY FLOORING:

a) by substrate shall be thoroughly mechanically grided and

cleaned to remove the existing impurities and ensure a rough

profile for subsequent coating including repairing potholes and

craters with epoxy mortar.

b) by applying approved brand Epoxy primer on the

prepared floor @0.20mm thicknes and allowed dry for 12-18

c) by applying evenly mixed 1.00 mm thick underlay coat /

NS Screed of approved make Self levelling Epoxy on

prepared surface and allowing it to dry for 12 to 14 hours.

d). by applying 0.30mm Epoxy Sealer coat before applying

d) by applying a Top Coat of Anti skid epoxy of approved

colour to achieve a thickness of 0.50 mm and allowed to dry.

e)The finished floor should be left for curing for a minimum 24

hours before bare foot traffic is allowed.

Second Floor Sqm 66.00 7906.00 521796.00

Third Floor Sqm 22.00 7906.00 173932.00

2mm Thick FIRE RETARDANT ESD EPOXY SKIRTING:

For Supply & Maintance Room

2mm Thick FIRE RETARDANT EPOXY SKIRTING:

a) by substrate shall be thoroughly mechanically grided and

cleaned to remove the existing impurities and ensure a rough

profile for subsequent coating including repairing potholes and

craters with epoxy mortar.

b) by applying approved brand Epoxy primer on the

prepared floor @0.20mm thicknes and allowed dry for 12-18

c) by applying evenly mixed 1.00 mm thick underlay coat /

NS Screed of approved make Self levelling Epoxy on

prepared surface and allowing it to dry for 12 to 14 hours.

d). by applying 0.30mm Epoxy Sealer coat before applying

d) by applying a Top Coat of Anti skid epoxy of approved

colour to achieve a thickness of 0.50 mm and allowed to dry.

e)The finished floor should be left for curing for a minimum 24

hours before bare foot traffic is allowed.

Second Floor Rmt 48.00 852.55 40922.40

Third Floor Rmt 18.00 852.55 15345.90

MATT FINISHED GVT VITRIFIED TILES FLOORING : - For

Providing and laying vitrified floor tiles in different sizes

(thickness to bespecified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), joints pointed

with matching colour pigment epoxy grout including grouting

2 the joints Cement based high polyer modified quick set tile -

adhesive (Water based) confirming to 1S: 15477 and matching

pigments etc., The tiles must be cut with the zero chipping

diamond cutter only. Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness, levelling system

and rubber mallet for placing the tiles gently and easily.. -

10mm thick Glazed Vitrified Tiles Matt / Anti Skid finish of Size,

approved colour and design .

shade: WOODEN TEXTURE ASH COLOUR FINISH

Digitally signed by DEEPAK

SAPL - P. No. 3 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

shade: ZV KLENZ GRIS TYPE-II (MATT FINISH)

Providing and laying Vitrified tiles in different sizes (thickness to

be specified by manufacturer), with water absorption less than

0.08 % and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick

bed of cement mortar 1:3 (1 cement: 3 coarse sand), joints

3 pointed with matching colour pigment epoxy grout including -

grouting the joints Cement based high polyer modified quick set

tile adhesive (Water based) confirming to 1S: 15477 and

matching pigments etc., complete.

shade: WOODEN TEXTURE ASH COLOUR FINISH

Providing and laying machine cut, mirror polished Marble stone

flooring, in required design (Simple geometrical, abstract etc.)

and in patterns in combination with Italian marble stones of

different colours, shades and finished surface texture etc., in

linear portions of the building, all complete as per the

architectural drawings, with 18 mm thick stone slab laid over 20

mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid andjoints pointed with matching colour

pigment epoxy grout including grouting the joints Cement

based high polyer modified quick set adhesive (Water based)

confirming to 1S: 15477 admixed with matching colour pigment

to match the marble shade, including rubbing, curing and

polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.- 18 mm thick Italian Marble stone slab,. -

GOLDEN BEIGE ITALIAN MARBLE - LIFT LOBBY

Second Floor Sqm 40.00 8134.09 3,25,363.60

Providing and fixing machine cut, mirror/ eggshell polished ,

Marble stone work for wall lining (veneer work) including dado,

skirting, risers of steps etc., in required design and pattern

wherever required, stones of different finished surface texture,

on 12 mm (average) thick cement mortar 1:3 (1 cement : 3

coarse sand) laid and jointed with white cement slurry @ 3.3

kg/sqm including pointing with white cement slurry admixed

with pigment of matching shade, including rubbing, curing,

polishing etc. all complete as per Architectural drawings, and as

directed by the Engineer-in-Charge. - 18 mm thick Italian

Marble stone slab,. - GOLDEN BEIGE ITALIAN MARBLE -

First Floor Sqm 2.00 12229.07 24,458.14

Second Floor Sqm 2.00 12229.07 24,458.14

Third Floor Sqm 2.00 12229.07 24,458.14

Providing and laying machine cut, factory finished 18mm thick

Zodiac Aqua Green Quartz (Type-C) engineered quartz stone

flooring of approved shade, pattern and texture, in required

designs, geometrical / abstract layouts as per architectural

drawings, using engineered quartz stone slabs of uniform

thickness, colour and finish, laid over 20mm thick cement

mortar bed in CM 1:4 (1 cement : 4 coarse sand) including

6 levelling and bedding complete, with joints filled using matching -

shade epoxy grout, including machine cutting, edge finishing,

groove making wherever required, pattern alignment, rubbing,

curing, cleaning and final finish complete, including all labour,

materials, cutting, wastage, tools and tackles complete as

specified and directed by the Engineer-in-Charge. - ZODIAC

AQUA GREEN QUARTZ (TYPE - C) - TOILET FLOORING

Second Floor Sqm 34.00 7753.65 2,63,624.10

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of

the building all complete as per the architectural drawings with

18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and joints

filled using matching shade epoxy grout with pigment of

7 NS matching shade including half round nosing as per details, -

rubbing, curing and polishing etc. all complete as specified and

as directed by the Engineer-in-Charge. - Polished Granite

stone slab colour of Black, Cherry/Ruby Red or

equivalent FOR COPING

Second Floor Rmt 92.00 1014.03 93,290.76

Digitally signed by DEEPAK

SAPL - P. No. 4 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

MATT FINISHED GVT VITRIFIED TILES FLOORING : -

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), joints pointed

with matching colour pigment epoxy grout including grouting

8 the joints Cement based high polyer modified quick set tile -

adhesive (Water based) confirming to 1S: 15477 and matching

pigments etc., The tiles must be cut with the zero chipping

diamond cutter only. Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness, levelling system

and rubber mallet for placing the tiles gently and easily.. -

10mm thick Glazed Vitrified Tiles Matt / Anti Skid finish

of Size, approved colour and design .

shade: NORWAY GREY - (TYPE - MATT FINISH)

shade: BOSCO BIEGE - (TYPE - MATT FINISH)

shade: NORWAY GREY - MATT FINISH - (TYPE - B)

shade: NORWAY GREY - MATT FINISH - (TYPE - B)

TYPE - 01: - 600 X 1200 X 10mm Thk. POLISHED GVT

VITRIFIED TILE DADOING :

Providing and laying Vitrified tiles in different sizes (thickness to

specified by manufacturer), with water absorption less than

0.08 % and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick

bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing

using epoxy grout mix of 0.70 kg of organic coated filler of

desired shade & matching pigments etc. complete.

Providing and fixing FULL BODY POLISHED GVT VITRIFIED TILE

of size 800 x 2400mm & 10mm thick for Dadoing over a cement

mortar backing coat of 15mm thick in CM 1:3, joints pointed

with matching colour pigment epoxy grout, properly cured,

Edge/ corner beading and finished in all respects all material,

lead, lift, labour etc. complete at all levels - TOILET AREA

GROUND FLOOR: -

shade: NIVEA GREY LIGHT TILE GLOSSY FINISHED

VITRIFIED TILE - 600x 1200 x 10mm

shade: ROSSATO SILVER DECOR TILE MATT FINISHED

VITRIFIED TILE - 600x 1200 x 10mm

shade: NORWAY GREY TILE MATT FINISHED VITRIFIED

TILE - 600x 1200 x 10mm

FIRST FLOOR: -

shade: NIVEA GREY LIGHT TILE GLOSSY FINISHED

VITRIFIED TILE - 600x 1200 x 10mm

shade: SLC - ZAFICO TEAL DECOR TILE GLOSSY

FINISHED VITRIFIED TILE - 600x 1200 x 10mm

shade: BASCO BIEGE TILE MATT FINISHED VITRIFIED

TILE - 200x 1200 x 10mm

SECOND FLOOR: -

shade: SR PARADISE BIANCO TILE GLOSSY FINISHED

VITRIFIED TILE - 600x 1200 x 10mm

shade: ZW CADIZ AQUA EM TILE GLOSSY FINISHED

VITRIFIED TILE - 600x 1200 x 10mm

shade: NORWAY GREY TILE MATT FINISHED VITRIFIED

TILE - 600x 1200 x 10mm

THIRD FLOOR: -

shade: ZL ENDLESS FEN TILE GLOSSY FINISHED

VITRIFIED TILE - 600x 1200 x 10mm

shade: ZV VOLCONO FLAME DAZZLE TILE GLOSSY

FINISHED VITRIFIED TILE - 600x 1200 x 10mm

Digitally signed by DEEPAK

SAPL - P. No. 5 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing and fixing 18mm thick Granite Stone 1st quality using

approved Adhesive to 19mm thick water proof Merine ply (BWP)

of Counter top and 400mm wide facia. The ITALIAN MARBLE

STONE rests on MS box frame work of 50 x 50mm which fixed

to the walls using anchor bolts etc., all as per drawing. The

9 NS - Cost includes providing and fixing M.S.frame work to wall using

necessary anchoring, zinc rich epoxy primer, two coats of

paint, all materials (like water proof ply, Adhesive, granite, full /

half round nosing, bull nosing, chamfering and edge polishing,

necessary openings wherever suggested, etc., complete)

labour, lead, lift, nails, screws, drilling, Adhesive, scaffolding,

etc., complete. - For Wash basin Counter & Facia.

shade: SUN YELLOW Granite (TYPE - F)

shade: MONT BLANC MARBLE (TYPE - H)

shade: ZODIAC AQUA GREEN QUARTZ (TYPE - C)

shade: ONYX MARBLE (TYPE - B)

POLISHED ITALIAN MARBLE LEDGE TOP SURFACE:

ITALIAN MARBLE STONE LEDGE :

Providing and laying machine cut, mirror polished Marble stone

flooring, in required design (Simple geometrical, abstract etc.)

and in patterns in combination with Italian marble stones of

different colours, shades and finished surface texture etc., in

linear portions of the building, all complete as per the

architectural drawings, with 18 mm thick stone slab laid over 20

mm (average) thick base of cement mortar 1:4 (1 cement : 4

10 NS coarse sand) laid and joints pointed with matching colour

pigment epoxy grout including grouting the joints Cement

based high polyer modified quick set adhesive (Water based)

confirming to 1S: 15477 admixed with matching colour pigment

to match the marble shade, including Nosing / edge chamfering

of 6mmx6mm, rubbing, curing and polishing etc. all complete

as specified and as directed by the Engineer-in-Charge.- 18 mm

thick Italian Marble stone slab,. - ITALIAN MARBLE for

shade: MONT BLANC MARBLE (TYPE-B)

shade: MONT BLANC MARBLE (TYPE-H)

shade: ICEBERG MARBLE (TYPE-B)

shade: MONT BLANC MARBLE (TYPE-E)

TOILET CUBICLES :

MODULAR PARTITIONS TO TOILETS:

MODULAR CUBICLES : TITAN 12MM Box-up SERIES:

Scope of Work : Supply and installation of Merino Besco TITAN

12mm BOX UP series cubicles of width and depth as per

specifications/site drawings Cubicle height to be 2100mm.

ITEM DESCRIPTION : Made from solid grade compact high-

pressure laminate as per IS:2046 and EN 438 manufactured

under high specific pressure > 5 MPa and temperature 120°C

with bunch of kraft papers impregnated with thermosetting

phenolic resin and decorative papers made of cellulose fiber

impregnated with thermosetting melamine resin which provide

superior scratch, abrasion, heat, chemical, impact, graffiti &

moisture resistance along with anti-bacterial properties. Panels

11 have a black core that when machined, presents a distinctive

All doors will be of single colour and made of 12 mm thick

Merino HPL compact panel. The doors will have chamfered

edges. Each door will be supported by 3 stainless steel made

hinges affixed to the pilasters. Stainless steel made coat hook

and stainless steel door knob are provided with each door. All

the doors will be routed at the vertical ends and the rubber

sponge lining will be incorporated at the routed ends.

All pilasters will be made of 12 mm thick Merino HPL compact

panel with chamfered edge and completed with stainless steel

made lock set(comprises of thumb turn and occupancy

indicator). Pilasters will be anchored to the floor using steel

made L brackets and box up fixtures are used for covering the

floor anchored mechanism. All pilasters will be routed at their

vertical ends to facilitate closure of doors.

All intermediate partitions or dividers will be made of 12 mm

thick Merino HPL compact laminate panels. They are affixed

with stainless steel made U-channel at their ends for ultimate

stability of the system. Design no. as specified by Arch. / Engr.

in suede finish. Size of panels to be as per drawing.

Digitally signed by DEEPAK

SAPL - P. No. 6 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

HARDWARE & ACCESSORIES

• Top rail is made of stainless steel grade 304. A thin plastic

film pasted for surface protection. Dimension is

55mmx42mmx1.6 mm.

• Corner joinery section made from Stainless steel grade 304.

Surface finish to be brush type. A thin plastic film pasted for

surface protection. Size to be 35mmx15mmx0.8 mm.

• Wall joinery section with hamming profile made from Stainless

steel grade 304. Surface finish to be brush type. A thin plastic

film pasted for surface protection. Size to be 21mmx16mmx0.8

• Fixed front panel to be anchored to floor with L Bracket of SS

316 and covered with SS 316 Grade Box Type plate from all

directions with 100mm clear Height from ground. Surface finish

to be matt type.

• Spring loaded Butt Hinges made from Stainless steel grade

304. Surface finish to be matt type. Covers to be lacquer

• Coat hook with rubber stopper made from Stainless steel

grade 304. Surface finish to be lacquer type.

• Round Door knob diameter 30 mm with grooves for better

hand grip made from Stainless steel grade 304. Surface finish

to be lacquer type.

• Rotating Thumb-turn locking system with privacy indicator

made from Stainless steel grade 304. Surface finish to be

• Anti-noise rubber padding of thickness 2 mm and width 10

• Stainless steel grade 304 screws.

• NOTE: DOOR SHUTTER FINISHED With imagino print on

front one side of Door and other side will be laminate SF

Titan Box-up 12mm Series Cubicles: Std Sizes Titan Box up 12

mm Series Cubicles: Std Sizes (W x D x H)- 1200 mm x 1500

NS mm x 2100 mm, (Height is including 100mm gap from bottom)

Door Width- 700 mm

URINAL HPL PARTITIONS TO TOILETS:

URINAL MODESTY SS

Thickness of Compact Laminate : 12mm

Color of HPL Boards: Single Standard and Plain Compact Color

Special Remarks For Customization : N/A

Size of UMP : 500mm (W) X 1200mm (H)

Overall Height Of UMP : 1850mm (Including bottom Gap of

Accessories: Standard - Merino Make Stainless Steel - 304

Grade accessories) - SS

a) SS Right Angle Brackets

b) S.S.Screws 304 G & P.V.C Wall Plugs

SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS

panels as per EN standard- 438.

GROUND FLOOR: Nos. 12.00 7670.00 92040.00

SECOND FLOOR: Nos. 12.00 7670.00 92040.00

FALSE CEILING WORKS:-

PLAIN METAL FALSE CEILING :

Supply and Installation Of LD Square Make Metal False Ceiling

tiles of 0.6mm thick GI sheets with 600x1200mm size

manufactured out of precoated hot dipped galvonised iron,and

light cut out tile would made of 0.6mm gi sheet with a finish

powder coated finish are formed in the grid to complete the

job , the grid would be 15mm shilouted grid made of 0.4mm gi

sheet , the grid would be hung to the true ceiling through M6

hook type anchor fastner and gi wire , butterfly clip provided

with every 800mm .Powder coating colour:

GROUND FLOOR: Sqm 78.00 3186.00 248508.00

SECOND FLOOR: Sqm 78.00 3186.00 248508.00

ACP INTERLOCKING LINEAR FALSE CEILING :

Digitally signed by DEEPAK

SAPL - P. No. 7 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing and fixing at all levels Aluminum Composite Panels

Louvers for external/ internal wall cladding with all necessary

aluminum member frame works at all heights and elevation,

fastening material, equipment handing transportation,

workmanship, preparation of working drawings, staging

scaffolding etc., all complete, as per specification drawings and

instructions of the engineer –in charge. The aluminum

composite Louvers panel shall be The ACP Louvers should be of

30mm thick in 610x2440mm, made with 3mm ACP in perfect

corrugation of 25x25mm with a gap of 25mm, The whole

corrugation is fixed on 3mm flat ACP sheet for easy fixing &

dimensional harmony. The surface shall be finished with PVDF

based coating and services coating on the reverse side shall be

with polymer paint coating. The Top surface shall be protected

with self-adhesive peel of masking foil the system shall be

14 NS designed to with stand a wind pressure of 200kg/sqm and shall

be fixed to the Masonry/RC walls with necessary clamps

brackets and anchor fasteners. All clamps and brackets shall be

hot dip galvanized minimum 80 microns thick and shall conform

to IS 4759-1996 the extruded aluminum section shall be

anodized in approved color with a anodic coating of minimum

20 microns Extruded section shall be 6063 T5 or T6 alloy

conforming to ASTM B221 Any other festering straps nuts bolts

rivets washers etc. shall be in stainless steel SS304 grade Rate

shall include providing EPDM gaskets open cell polyethylene

backer rods weather sealant etc.

shade: RA-154 NOVACENTOPINE ACP INTERLOCKING PANELS

FALSE Ceiling (Type - E) Sqm 78.00 11210.00 874380.00

DOOR FRAME & SHUTTER:

Providing, making and fixing seasoned solid wood (Sal wood

/equivalent approved). DOOR FRAMES made out of approved

quality wood size- (125mm X 65mm), kiln, seasoned, anti

treated, shaped, grooved, metered joint arrangement including

use of exterior quality approved water repellent adhesive,GI

screws, pins, etc. Also two coats of PU polish with two coats of

primer using spray machine and surfaces of frame in contact

with masonry/concrete surfaces shall be painted with one coat

of hot bitumen of approved quality, fixing using 4 nos GI Anchor

fasteners of 200mm x 15mm on each side of frame,all complete

at all leads, lifts, heights as per drawing.

The quoted rates to be inclusive of providing of wood architrave

of 50mm x 18mm size. made out of approved quality (Beach

wood or equivalent wood with cornice as approved by

Architect), kiln, seasoned, anti ternite treated, shaped, grooved,

mitered joint arrangement inculding use of exterior quality

approved water repellent adhesive,GI screws, pins, filling the

gaps with PU foam etc, Also to include polishing on architrave in

approved shade etc,all complete as per the

drawing,specification and instruction of the engineer in charge.

(Frame size-125mm X 65mm- Sal wood)

Providing and fixing factory made of 45mm thick block

Commercial board door shutter - (Company- Green ply/Merino

ply / Sonani Ply / Euro / equivalent as approved by Architect)

confirming to IS 2202 (Part - I); Shutter shall be manufactured

with exterior quality synthetic adhesive forming marine ply

surfaces, internally lipped as manufactured. The shutter shall

be provided with Teak wood louvers of 45mm wide and 12mm

thk placed at 45 degree angle of size - 600 x 300mm at bottom

& finished with PU Paint as per drawing. Further shutter shall be

finished both side with 1 mm thick Laminate,

edges of shutter shall be provided with 6mm thick teakwood

beadings using exterior quality synthetic adhesive, headless GI

nails, screws, beading finished with approved colour / shade

melamine polished, etc. including iron mongeries as per

schedule and drawings all complete to entire satisfaction of the

Architect / Engineer In Charge. (Stainless Steel Mongeries to be

from Dorset / Approved Brand only). (Shutter thickness-45mm-

& 1mm thickness Laminate.

Door Hardware : Rate should include supply and installation of

door and hardware at all levels with screws set as mentioned in

the door and hardware schedule as below. All the fixtures are

Brush Steel finish.

LADIES TOILET & GENTS TOILET DOOR:

Single Panel Door - Specification as per given specification FOR

DOOR FRAME & DOOR SHUTTER without Vision Panel - - Single

15 leaf Door - D3 (1200mmx2400mm) - LADIES TOILET & GENTS

Digitally signed by DEEPAK

SAPL - P. No. 8 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Single Panel Door - Specification as mentioned -

a) SS ball bearing Butt Hinges - 4nos / shutter - 125x76x3mm

Model: HG 1154 SS - 4 Nos,

b). 450mm H - Handle in pair , 25.4mm Dia , Product shade -

SH18PSS - 1 No - 1 Nos.

NS c) SS rubber door stopper (Dorset DB 22/DB WC 22 - Door

buffer or equivalent. - 1No.

d) Door Closure Max upto 80Kg, Product shade - DC80PDC -

e). 100mm Tower Bolt, Product shade - TS2410SS - 1 No

GROUND FLOOR: Nos. 4.00 64900.00 259600.00

SECOND FLOOR: Nos. 4.00 64900.00 259600.00

DT 01A - 1200 x 2400 - FLUSH DOOR - SINGLE SHUTTER WITH

LOUVER DOUBLE SWING DOOR - For PH Toilets.

Providing, making and fixing seasoned solid wood (Sal wood

/equivalent approved). DOOR FRAMES made out of approved

quality wood size- (125mm X 65mm), kiln, seasoned, anti

treated, shaped, grooved, metered joint arrangement including

use of exterior quality approved water repellent adhesive,GI

screws, pins, etc. Also two coats of PU polish with two coats of

primer using spray machine and surfaces of frame in contact

with masonry/concrete surfaces shall be painted with one coat

of hot bitumen of approved quality, fixing using 4 nos GI Anchor

fasteners of 200mm x 15mm on each side of frame,all complete

at all leads, lifts, heights as per drawing.

The quoted rates to be inclusive of providing of wood architrave

of 50mm x 18mm size. made out of approved quality (Beach

wood or equivalent wood with cornice ), kiln, seasoned, anti

ternite treated, shaped, grooved, mitered joint arrangement

inculding use of exterior quality approved water repellent

adhesive,GI screws, pins, filling the gaps with PU foam etc, Also

to include polishing on architrave in approved shade etc,all

complete as per the drawing,specification and instruction of the

engineer in charge. (Frame size-125mm X 65mm- Sal wood)

Providing and fixing factory made of 45mm thick block

Commercial board door shutter - confirming to IS 2202 (Part -

I); Shutter shall be manufactured with exterior quality synthetic

adhesive forming marine ply surfaces, internally lipped as

manufactured. The shutter shall be provided with Teak wood

louvers of 45mm wide and 12mm thk placed at 45 degree angle

of size - 600 x 300mm at bottom & finished with PU Paint as per

drawing. Further shutter shall be finished both side with 1 mm

thick Laminate,

edges of shutter shall be provided with 6mm thick teakwood

beadings using exterior quality synthetic adhesive, headless GI

nails, screws, beading finished with approved colour / shade

melamine polished, etc. including iron mongeries as per

schedule and drawings all complete to entire satisfaction of the

Engineer In Charge.

Door Hardware : Rate should include supply and installation of

door and hardware at all levels with screws set as mentioned in

the door and hardware schedule as below. All the fixtures are

Brush Steel finish.

The Hardware set for the Door are mentioned below:

1. 450mm H - Handle in pair , 25.4mm Dia , Product shade -

NS 2. 100Kg Floor Spring, Product shade - FS120 - 1 No

3. Bottom and Top Patch Fitting, Product shade - FSTP/BP - 1

GROUND FLOOR: Nos. 2.00 76700.00 153400.00

SECOND FLOOR: Nos. 2.00 76700.00 153400.00

DT 03A - 900 x 2400 - FLUSH DOOR - SINGLE SHUTTER WITH

LOUVER - For 3rd Gender Toilet

Providing, making and fixing seasoned solid wood (Sal wood

/equivalent approved). DOOR FRAMES made out of approved

quality wood size- (125mm X 65mm), kiln, seasoned, anti

treated, shaped, grooved, metered joint arrangement including

use of exterior quality approved water repellent adhesive,GI

screws, pins, etc. Also two coats of PU polish with two coats of

primer using spray machine and surfaces of frame in contact

with masonry/concrete surfaces shall be painted with one coat

of hot bitumen of approved quality, fixing using 4 nos GI Anchor

fasteners of 200mm x 15mm on each side of frame,all complete

at all leads, lifts, heights as per drawing.

Digitally signed by DEEPAK

SAPL - P. No. 9 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

The quoted rates to be inclusive of providing of wood architrave

of 50mm x 18mm size. made out of approved quality (Beach

wood or equivalent wood with cornice , kiln, seasoned, anti

ternite treated, shaped, grooved, mitered joint arrangement

inculding use of exterior quality approved water repellent

adhesive,GI screws, pins, filling the gaps with PU foam etc, Also

to include polishing on architrave in approved shade etc,all

complete as per the drawing,specification and instruction of the

engineer in charge. (Frame size-125mm X 65mm- Sal wood)

Providing and fixing factory made of 45mm thick block

Commercial board door shutter - confirming to IS 2202 (Part -

I); Shutter shall be manufactured with exterior quality synthetic

adhesive forming marine ply surfaces, internally lipped as

manufactured. The shutter shall be provided with Teak wood

louvers of 45mm wide and 12mm thk placed at 45 degree angle

of size - 600 x 300mm at bottom & finished with PU Paint as per

drawing. Further shutter shall be finished both side with 1 mm

thick Laminate,

edges of shutter shall be provided with 6mm thick teakwood

beadings using exterior quality synthetic adhesive, headless GI

nails, screws, beading finished with approved colour / shade

melamine polished, etc. including iron mongeries as per

schedule and drawings all complete to entire satisfaction of the

Engineer In Charge.

Door Hardware : Rate should include supply and installation of

door and hardware at all levels with screws set as mentioned in

NS the door and hardware schedule as below. All the fixtures are

Brush Steel finish.

GROUND FLOOR: Nos. 1.00 76700.00 76700.00

SECOND FLOOR: Nos. 1.00 76700.00 76700.00

DT 04A - 1200 x 2400 - FLUSH DOOR - SINGLE SHUTTER WITH

LOUVER - For BABY CARE

Providing, making and fixing seasoned solid wood (Sal wood

/equivalent approved). DOOR FRAMES made out of approved

quality wood size- (125mm X 65mm), kiln, seasoned, anti

treated, shaped, grooved, metered joint arrangement including

use of exterior quality approved water repellent adhesive,GI

screws, pins, etc. Also two coats of PU polish with two coats of

primer using spray machine and surfaces of frame in contact

with masonry/concrete surfaces shall be painted with one coat

of hot bitumen of approved quality, fixing using 4 nos GI Anchor

fasteners of 200mm x 15mm on each side of frame,all complete

at all leads, lifts, heights as per drawing.

The quoted rates to be inclusive of providing of wood architrave

of 50mm x 18mm size. made out of approved quality (Beach

wood or equivalent wood with cornice as approved by

Architect), kiln, seasoned, anti ternite treated, shaped, grooved,

mitered joint arrangement inculding use of exterior quality

approved water repellent adhesive,GI screws, pins, filling the

gaps with PU foam etc, Also to include polishing on architrave in

approved shade etc,all complete as per the

drawing,specification and instruction of the engineer in charge.

(Frame size-125mm X 65mm- Sal wood)

Providing and fixing factory made of 45mm thick block

Commercial board door shutter confirming to IS 2202 (Part - I);

Shutter shall be manufactured with exterior quality synthetic

adhesive forming marine ply surfaces, internally lipped as

manufactured. The shutter shall be provided with Teak wood

louvers of 45mm wide and 12mm thk placed at 45 degree angle

of size - 600 x 300mm at bottom & finished with PU Paint as per

drawing. Further shutter shall be finished both side with 1 mm

thick Laminate,

edges of shutter shall be provided with 6mm thick teakwood

beadings using exterior quality synthetic adhesive, headless GI

nails, screws, beading finished with approved colour / shade

melamine polished, etc. including iron mongeries as per

schedule and drawings all complete to entire satisfaction of the

Engineer In Charge.

Door Hardware : Rate should include supply and installation of

door and hardware at all levels with screws set as mentioned in

the door and hardware schedule as below. All the fixtures are

Brush Steel finish.

The Hardware set for the Door are mentioned below:

1. 450mm H - Handle in pair , 25.4mm Dia , Product shade -

2. Stainless Steel 2 Ball Bearing Hinge 125 x 75 x 3mm, Product

NS shade -HG1154SS - 4 Nos

3. Door Closure Max upto 80Kg, Product shade - DC80PDC -

4. 100 Tower Bolt, Product shade - TS2410SS - 1 No

GROUND FLOOR: Nos. 1.00 76700.00 76700.00

Digitally signed by DEEPAK

SAPL - P. No. 10 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

SECOND FLOOR: Nos. 1.00 76700.00 76700.00

SECOND FLOOR: Nos. 1.00 76700.00 76700.00

RECTANGULAR SHAPE MIRROR:

Providing, supplying and fixing 6mm thick Rectangular Shaped /

architect approved shape mirror with Stainless Steel Box section

Frame work as indicated in the detailed drawing of 25x25mm of

1.2mm thick. Providing, fabricating & fixing in position of

19 NS Stainless Steel box section as indicated in the detailed drawing.

All the exposed Stainless Steel surfaces shall be finished in

Brass Shade PVD coating as per the detailed drawing and

instruction of Engineer in Charge of Work,

GROUND FLOOR: Sqm 6.00 6490.00 38940.00

FIRST FLOOR: Sqm 6.00 6490.00 38940.00

SECOND FLOOR: Sqm 6.00 6490.00 38940.00

THIRD FLOOR: Sqm 6.00 6490.00 38940.00

ALUMINIUM U PROFILE CLADDING (ANODIZED /

POWDER COATED FINISH AS PER SUGGESTION)

Providing and fixing of anodised / powder coat finish with

3.5mm to 4mm thick aluminium U profile at the junction

between 2 materials (Horizontal sides) flushed in level with the

panelling as per details. Profile to be fixed with necessary /

adhesive Length 3 m.

Aluminium U profile cladding - 10mm

GROUND FLOOR: Rmt 16.00 2360.00 37760.00

FIRST FLOOR: Rmt 16.00 2360.00 37760.00

SECOND FLOOR: Rmt 16.00 2360.00 37760.00

THIRD FLOOR: Rmt 16.00 2360.00 37760.00

MODULAR MERINO LOCKERS AS PER SELECTION

Approx. per locker size -300x400mm & Approx. per locker

size -200x300mm

LOCKER: MERINO LOCKER TYPE-A4

Providing and fixing 375mm x 470mm x 1900mm Locker with

below mentioned specification.

Thickness of Compact Laminate:

: 3mm (Side & Back Parti ti on) & 9mm (Top, Bott om, Shelves

& Bott om Base)

Special Remarks For Customizati on : N/A

Color of HPL Boards: Single Standard Compact Color

Model Type : A4 (4 Tier in 1 Column)

Size of Column : 375mm (W) X 470mm (D) X 1800mm (H)

Excluding 100mm Bott om Base

Size of Locker : 375mm (W) X 470mm (D) X 450mm (H)

Accessories: Standard- Aluminum, Stainless Steel - 304 Grade

a) Aluminum Interlocking Supporti ng Channels

b) CAM LOCK-THREADED P-MCL2-25

c) SS Hinges - Stainless Steel

d) Door Stopper Rubber Lining

e) SS Hanger Rod (Providing only in A2 Model)

f) SS Screws & pvc Wall Plugs

SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS

panels as per EN standard- 438.

NS GROUND FLOOR Nos. 50.00 39657.44 1982872.00

TABLE 19MM PLYWOOD AND FINISHED WITH SOLID

ACRYLIC SURFACE (2.050x 0.750):

Providing, fabricating, and fixing table supports made from

18mm thick BWP Plywood of approved make and quality,

cut and assembled as per approved design, dimensions, and

drawings. All exposed surfaces (except table top) shall be

covered with 1.00mm Thick laminate of approved make as

selected by the Architect, fixed using synthetic resin adhesive.

The Table Top will be finished with 12mm thick SOLID

ACRYLIC SURFACE as mentioned in the drawing. All edges

shall be finished neatly with matching PVC edge band to achieve

a clean and seamless appearance. Internal and hidden surfaces

shall be finished with 0.8mm Thick laminate of approved make,

colour and texture as selected by Architect to prevent warping.

The supports shall be properly joined and reinforced to ensure

structural stability and load-bearing capacity. The work shall

include all materials, adhesives, fasteners, edge trims, labour,

and tools required for proper fabrication, finishing, and

installation of the table supports, all materials, all labours, HOM,

lead and lift, loading and unloading, providing and removal of

scaffolding, all incidental charges, etc., completed in

accordance with approved drawings and instructions of the

Engineer in charge of work at all levels.

NS GROUND FLOOR No 2.00 73325.20 146650.40

23 25 Micron ANODIZED ALUMINIUM SKIRTING :

Digitally signed by DEEPAK

SAPL - P. No. 11 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Modular Anodised Aluminum Skirting - 80 mm High (On

Peripheral walls, Partitions and Columns) :

Providing & fixing of 25 micron Anodised Skirting profile of

80mm height inclusive of all accessories and installation as per

the manufacturer specifications and details shown below. Rate

should include preparation of surfaces to have necessary

grooves as shown in details.

Slim design of the profile gives a recessed look.

The capped toe design of the profile covers wall to floor

expansion gaps making it an ideal profile for tiled/wooden floor

The profiles are installed using high tack adhesive making the

installation fast and easy on any surface, including 12mm Thk.

BWP Plywood and gypsum partitions.

Supplied with protection tape which is removed after completion

matching inner, outer corner and end cap complete the range.

Matching corner guards are provided with the profiles.

NS GROUND FLOOR Rmt 92.00 1093.86 100635.12

NS FIRST FLOOR Rmt 138.00 1093.86 150952.68

NS SECOND FLOOR Rmt 298.00 1093.86 325970.28

NS THIRD FLOOR Rmt 128.00 1093.86 140014.08

CONSOLE TABLE MADE WITH MDF & FINISHED WITH

APPROVED LAMINATE:

Providing, fabricating, and fixing WALL MOUNTED CONSOLE

TABLE of specified dimention made out of 18mm thick BWP

Plywood of approved make and quality, cut and assembled as

per approved design, size, and profile. The table shall be

securely fixed to the wall using concealed MS brackets with

two coats of zinc Rich primer and two coats of approved shade

synthetic enamel, designed to carry the required load and

maintain alignment. All exposed surfaces of the 18mm BWP

Plywood shall be finished with 1.0 mm thick LAMINATE, fixed

with synthetic resin adhesive. Edges shall be finished neatly

with 2 mm PVC edge band to achieve a clean and seamless

appearance. All unexposed surfaces shall be finished with

balancing laminate & two coats of synthetic enamel

paint with 2 coats of Zinc rich primer for strucctural steel

work to prevent warping. The item shall include all materials,

adhesives, edge trims, MS supports, hardware, accessories,

labour, and tools necessary for proper fabrication, installation,

and finishing of the unit, painting, all labours, HOM, lead and

lift, loading and unloading, providing and removal of

scaffolding, all incidental charges, etc., all complete as per

approved drawings.

NS (i). 4000mm Length, 500mm Wide & 200mm Depth Nos. 1.00 136852.86 136852.86

24 DRYWALL SYSTEM:

GYPSUM PARTITION WALL THICKNESS- 110MM

Providing and Fixing 110 mm thick Partition made of Double

board 15mm thick GRG(fireline) board on either side facing with

Aluminium frame work 50x50x2mm including 50mm thk 48 kg

Density Rockwool infill covered with LDPE sheet. aluminium

partition which includes inner layer of tapered edge 15mm

thick Gyproc® Fireline (conforming to IS:2095 – 1996-Part-I)&

outer layer of tapered edge 13mm thick Gyproc® Duraline

(conforming to BS 5234- 1992-part-2) is screw fixed with

drywall screws of 25mm & 35mm at 300mm centres to either

side of 50 x 50x2mm Aluminium Frame Work placed at 600mm

centre to centre, which is anchored to the floor & true ceiling

using suitable anchor fasteners or metal screws with PVC plugs.

The boards are to be fixed to the framework with joints

staggered to avoid leakage through joints.

Finally square and tapered edges of the boards are to be jointed

and finished so as to have a flush look which includes filling and

finishing with Gyproc Jointing compound, Gyproc Joint Paper

tape and two coats of Drywall Top Coat.

Special Provisions: Contractor to make cutouts for all electrical,

networking boxes as detailed in the drawing for which no extra

cost is payable.

NS GROUND FLOOR Sqm 15.00 10248.30 153724.50

GREEN AS PER SHOP DRAWING - PLY WOOD & 6MM HDF

BOXING: - OFFICE AREA

Digitally signed by DEEPAK

SAPL - P. No. 12 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing, fabricating, and installing wall cladding comprising

18mm thick BWP Plywood finished with 6mm HDF facing,

installed as per the detailed mentioned height. The cladding

shall be fixed 100mm away from the existing wall using a

50×50×2mm thick aluminium framework, spaced at

600×600mm c/c both horizontally and vertically. The

framework shall be fully aligned, levelled, and securely

anchored to walls, floors, and ceilings using approved anchor

fasteners to ensure stability and rigidity.

25 The complete cladding system shall achieve an overall thickness

of 100mm, including plywood, HDF, and the air gap. Cladding

panels shall be installed on the aluminium framework using

concealed screws or other approved fixing systems. The visible

surface shall be finished with approved shade paint on high-

pressure laminate (HPL) of designated design, colour, and

texture as per architectural approval. Laminate edges and cut-

outs shall be properly finished using edge-banding or approved

sealing methods.

Work shall include all labour, materials, tools, adhesives,

screws, aluminium brackets, and consumables required for

complete installation. Provision shall be made for electrical,

networking, and AV service boxes, including accurate cut-outs,

trimming, and supports. Service boxes shall be mounted on

25×25×1.2mm thick extruded aluminium “L” angles, fixed

securely to the aluminium framework at specified locations and

heights as instructed by the Engineer-in-Charge.

All works shall strictly follow approved architectural drawings,

technical details, and site instructions, ensuring a complete,

stable, and high-quality wall cladding installation.

Provision to be made for all electrical, networking boxes which

shall be installed on 25mm x 25mm x 1.2mm thick extruded

aluminium "L" angle screwed onto partition framework at

required heights/levels as directed.

NS FIRST FLOOR Sqm 16.00 9921.44 158743.04

13.52MM SANDWICH GLASS PARTITION AS PER

SANDWICH GLASS:

Supply and Fixing of SANDWITCH Glass partition of 13.52mm

Thk. (6mm + 1.52PVB+6mm) using Frames to a height of

maximum 3m or as per drawing.The Fixed glass to be fixed

using Profiles at Top & Bottom & at sides. The profile size to be

45x25MM to be fixed on to the floor/wall/ ceiling as per the

architect design. Junction profile to be used at all Glass to

Glass vertical joints, 90 Deg L Junction Profiles and T Junction

profiles necessary as per design.In case of Glass overall panel

Alexa MP45 & BP45 Overpanel Profile to be used.In case of

Open glass edges EP45 End Profile to be used. The Alexa

profiles shall be suitable for Glass thickness of 13.52mm.The

Profile shall be matt 50 micron powder coating, the Profile

Manufacturer to supply all the necessary clips, seals and fixing

accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 50

Micron of Powder coating.

NS FIRST FLOOR Sqm 16.00 15140.58 242249.28

26 LAMINATE PANELLING:

Providing & fabricating wall panelling with ply upto height

mentioned in the drawing on all the walls, ply panelling is done

using 50mmx50mmx2mm Aluminium frame work . The over all

cladding shall be 150mm including 18mm thk ply with

LAMINATE Metallic Silver finish. The Depth of panelling is

150mm from the wall and on the false level the horizontal and

vertical boxing depth shall be as per detail as shown in

drawing. The panel shall be fixed on the aluminium frame work.

The TV Details and laminated niche details will be as per AV

Vendor The Laminate shall be of approved design and colour.

The panel shall have 4mm thick grooves as shown in detail drg.

NS FIRST FLOOR Sqm 36.00 12390.00 446040.00

27 150MM WIDE LAMINATE PANELLING BAND:

Digitally signed by DEEPAK

SAPL - P. No. 13 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Provide and install 150 mm wide laminate panelling band using

1.0 mm thick high-pressure decorative laminate of approved

make, colour and finish, fixed over 18mm thk. BWR Plywood

substrate as specified. Laminate shall conform to IS standards,

be free from scratches and defects, and bonded to the

substrate using high-quality neoprene-based adhesive. Panels

shall be cut to required lengths, installed true to line and level,

and securely fixed to the wall using approved screws or

adhesive as per drawings. All exposed edges shall be finished

with matching 1 mm PVC edge band or laminate strips. Work

shall include all materials, labour, tools, adhesives, edge

finishing, and incidental items required to complete the

installation as per approved samples, manufacturer guidelines,

and architect’s instructions.

NS FIRST FLOOR Sqm 16.00 20720.80 331532.80

HERRINGBONE PATTERN LAMINATE PANEL - STAFF

Provide and install 450 mm wide laminate panelling band

using 1.0 mm thick high-pressure decorative laminate, of

approved make, colour and finish, placed in HERRINGBONE

PATTERN, fixed over 18 mm BWR plywood substrate as

specified Supported by 50x25x2mm thk. aluminium Frame

Work. Laminate shall conform to IS standards, be free from

scratches and defects, and bonded to the substrate using high-

quality neoprene-based adhesive. Panels shall be cut to

required lengths, installed true to line and level, and securely

fixed to the wall using approved screws or adhesive as per

drawings. All exposed edges shall be finished with matching 1

mm PVC edge band or laminate strips / 1" Edge Paint as per

drawing including all materials, all labours, HOM, lead and lift,

loading and unloading, providing and removal of scaffolding and

incidental items required to complete the installation as per

approved samples, manufacturer guidelines.

NS FIRST FLOOR Sqm 26.00 19520.74 507539.24

VINYL WALL PAPER:

Providing & fixing GREY EXPOSED BRICK TEXTURE VINYL

wall paper on all walls, wall panelling with 18mm thick BWP

ply upto height mentioned in the drawing on all the walls, ply

panelling is done using 50mmx50mmx2mm Aluminium

29 frame work. The over all cladding shall be 80mm/as per

drawing including 18mm thick BWP Plywood with approved

NS FIRST FLOOR Sqm 16.00 9090.72 145451.52

30 PANTRY COUNTER : STAFF DINING

Providing and fixing 600mm wide counter made of 18mm thick

BWR grade plywood boxing on all sides and 12mm thick

BWR grade plywood at rear side of the box, including

12mm thick BWR plywood inner shelves. The exposed

surfaces of the box shall be finished with 1.0mm thick approved

make laminate and non-exposed surfaces with 0.8mm thick

approved shade laminate, fixed using approved adhesive. The

counter top shall be 12mm thick acrylic solid surface fixed

on 18mm thk. waterproof marine BWR plywood box

framework top surface. The plywood box framework shall be

securely fixed to the wall using anchor bolts/fasteners. The

plywood box shutters shall be made of 18mm thick Merino

BWR plywood finished with 1.0mm thick approved laminate on

exposed surfaces and 0.8mm thick laminate on non-exposed

surfaces. The item includes providing and fixing complete

waterproof plywood framework, necessary cut-outs/openings,

edge profile of 35mm rough unfinished surface to counter top,

all materials including marine plywood, laminates, adhesives,

fixtures, screws, nails, drilling, scaffolding, labour, lead, lift,

handling of materials (HOM) and all other incidental works,

complete in all respects as per drawings, specifications - For

Counters. (The cost includes Water Proof Ply Wood framework).

NS FIRST FLOOR Sqm 4.00 39454.48 157817.92

31 12mm Thk. Acrylic Solid Surface Back Splash:

Providing and fixing 150 mm high counter splash board, etc.,

using 18mm thick BWR Plywood as the base substrate and

12 mm thick Acrylic SOLID SURFACES on horizontal

surfaces, verticals, and other portions, complete as per design.

The plywood shall be of approved quality, securely fixed to the

existing supporting framework, and properly leveled. The Acrylic

Solid surface sheets shall be cut, shaped, jointed, and finished

with seamless joints, smooth edges, and uniform appearance,

including necessary adhesives, sealants, and accessories. All

exposed edges shall be neatly finished, and the work shall be

executed strictly in accordance with the approved drawings,

specificationscomplete in all respects.

NS FIRST FLOOR Sqm 4.00 27905.82 111623.28

Digitally signed by DEEPAK

SAPL - P. No. 14 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

LAMINATED STORAGE UNIT ABOVE BOTTOM COUNTER

PARTIALLY OPEN & PARTIALLY CLOSED: - for PANTRY

Providing and fixing 400mm wide, 600mm height

Laminated Storage unit made in 310 grade 18mm thick

BWR Water proof Plywood boxing on all sides and 12mm

thick BWR Plywood at rear side of the box including 12mm

thick BWR Plywood inner shelves. The exposed surfaces of

the box shall be finished with 1.0mm thick approved make

32 laminate, fixed using approved adhesive and all edges to be of

2mm thick PVC Edge beading. The quoted rate shall include the

cost of providing and fixing necessary hardwares like SS hinges,

handles, locks, tower bolts and ball catches, draw channels etc.

all as per drawing.

NS First Floor Sqm 4.00 35743.38 142973.52

TEXTURE PAINT:- Deep Blue Gradient Paint up to

1.20mts as approved by Science Team: - STAFF DINING

Finishing walls with textured interior paint of required shade

:New work (Two coats applied @ 3.28 L/10 m²) over and

including priming coat of interior primer applied @ 2.20kg/10

m² to give an even shade after thoroughly brooming the

surface to remove all dirt, dust, mortar drops and foreign

matter including preparing the surface even and sand paper

smooth, cost of materials, labour, HOM, Providing and removal

of scaffolding, loading and unloading, lead and lift, incidental

charges, etc., complete as per specifications.

NS SECOND FLOOR Sqm 24.00 4537.10 108890.40

34 CNC CUTTING WITH PU PAINT FINISH: RECEPTION

Providing and fixing factory CNC (Computer Numerical

Control) routed panels cut in a Circular Shape as per the

approved design of the Architect, on 30mm thick MDF board

of approved make and quality protruded from the main 18mm

CNC Cut MDF Board in circular shape with various dia as

mentioned. The MDF board shall be termite and borer proof,

water and moisture resistant, and fire retardant. The CNC-cut

MDF panels shall be fixed at site as required, using a necessary

60 Micron powder coated 50mmx25mmx2mm aluminium

frame work of approved design and shade. The MDF surfaces

shall be finished with polyurethane (PU) paint of approved

shade and finish to achieve a smooth, uniform, and durable

surface. The LED WALL Light provision shall be made on

the protrued portion of the Circualr shape MDF board as

per the drawing & instruction. The rate shall include the

cost of all materials, labour, hire of machinery (HOM), provision

and removal of scaffolding, handling, loading, unloading, all

leads and lifts, and the complete execution of the work in all

35 CNC CUTTING WITH PU PAINT FINISH: RECEPTION AREA

Providing and fixing factory CNC (Computer Numerical

Control) routed panels cut in a concentric circular pattern

as per the approved design of the Architect, on 18mm thick

MDF board of approved make and quality. The MDF board shall

be termite and borer proof, water and moisture resistant, and

fire retardant. The CNC-cut MDF panels shall be fixed at site as

required, using a necessary 60 Micron powder coated

50mmx25mmx2mm aluminium frame work of approved

design and shade. The MDF surfaces shall be finished with

polyurethane (PU) paint of approved shade and finish to achieve

a smooth, uniform, and durable surface. The rate shall include

the cost of all materials, labour, hire of machinery (HOM),

provision and removal of scaffolding, handling, loading,

unloading, all leads and lifts, and the complete execution of the

work in all respects as directed by the Architect . Note: The

quoted rate shall include the cost of the required Powder

Coated aluminium framework in the approved shade.

NS SECOND FLOOR Sqm 60.00 23369.90 1402194.00

6mm thk. LACQUERED GLASS WALL PANELLING:

CONFERENCE ROOM

Providing, fabricating, and fixing writing board made of 6mm

thick LACQUERED GLASS with frame work of approved color

and make, fixed to 18mm thick ply which rest on aluminium

framework of 50x25x2.5mm thk. The aluminium frame sections

36 fixed to the wall surface using anchor bolts, and Lacqurered

Glass panel accessible from one end for writing. including edge

polishing, necessary fixtures, supports, and accessories, as per

approved drawings and instructions of Engineer-in-Charge.

NS SECOND FLOOR Sqm 34.00 24476.74 832209.16

Digitally signed by DEEPAK

SAPL - P. No. 15 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

65MM THK GYPSUM WALL LINING (GYPSUMBOARD): -

FOR CONFERENCE ROOM

1. 62.5mm(Min.) thick Wall lining with GypSerra™ C-stud which

includes single layer of tapered edge 12.5mm thick Gyproc®

Habito (conforming to EN 520: 2004, A1:2009, Type A,D,R,I

along with the transverse strength of 550 N and longitudinal

strength of 1090 N ,Thermal Conductivity: 0.24 (w/mºK)

Thermal resistance: 0.05 (m2K/w) and pull out strength of

>600N & density between 960 to 987 kg/m3, Specially designed

to give flexibility of static loading without any ply or combustible

material as a support or backing anywhere on the drywall to

utilize space in a fast and functional way, should be able to take

even unplanned static load upto 30Kg point load with regular

number 10 wood screw at minimum spacing of 150 mm and

board size 1220x2440mm is screw fixed to C-stud which is

placed adjacent to brick/RCC wall.

2. 48x0.5mm GypSerra™ C-stud {Material-IS 513,Y/S-300Mpa,

Finish - AZ150 (IS 15961)} placed at 610mm c/c in 50x0.5mm

GypSerra™ {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS

15961} floor and ceiling channel.

3. Floor & Ceiling channel is anchored to the floor & True ceiling

using Gyproc® Rawl plug Ø8x45mm {Material-IS 513 CR1

grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete

grade} /Hilti Nail anchor fasteners at 600mm c/c in centerline

4. 50x32x32x0.5mm GypSerra™ Floor channel to be cut & bend

& bracing at every 1200mm c/c vertically. Floor channel is fixed

to brick wall with Sleeve Anchor (Ø6x40mm)/ Impact anchor or

to RCC with Gyproc® Rawl Plug.

5. Floor channel to be wrapped with 70µ Self Adhesive LDPE

moisture barrier film to further improve corrosion resistance

6. A GypSerra™ Noggin channel {Material-IS 513,Y/S-300Mpa,

Finish - AZ150 (IS 15961)} of 48x0.5mm width has to be

provided at the horizontal joints of outer boards.

7. Single layer of 12.5mm Thick Gypsum board to be screw

fixed with Gyproc® Habito screws of 25mm at minimum

spacing of 300 mm at centre and 150 mm at periphery.

8. Finally square and tapered edges of the boards are to be

jointed and finished so as to have a flush look which includes

filling and finishing with Gyproc® Pro-Fill Jointing compound Air

Dry (Conforms to ASTM C475), Gyproc® Joint Paper tape.

9. The junction of the partition with masonry & all penetration

through the partition has to be treated with Acoustic sealant.

10. All other detailing and specifications to be followed as per

approved drawing of Gyproc. Note:

1. For heights between 4200mm and 8000mm, GypSerra™

Deep Flange Ceiling Channel should be used at head (subject to

deflection criteria).

2. Maximum reachable wall heights are based on L/240 at

3. Gyproc® Control Joint has to be provided at every 10 Mtr.

c/c. along the length of wall.

NS SECOND FLOOR Sqm 204.00 2277.40 464589.60

RIPPLE FROSTED TOUGHENED GLASS PARTITION WITH

WAVE PATTERN Shade similar to AP Light Sky on GREY

POWDER COATED ALUMINIUM FRAME WORK: FOR

CONFERENCE ROOM

Supply & Installation of Ripple Frosted Toughened Glass

partition with wave pattern shade similar to AP Light Sky on

Grey powder coated (60 Microns) approved shade finish

38 aluminium framing of section 50mm x 25mm x 2mm and the

gap filled with 8mm thick Frosted Toughened Glass. The powder

coated approved shade Aluminium frame work of will be as per

the details all as per drawing, detailing and instruction of EIC.

NS SECOND FLOOR Sqm 30.00 26165.32 784959.60

PANTRY STORAGE UNIT: SIZE: 600mm Deep & 900mm

Height for the length specified in dwg.

Digitally signed by DEEPAK

SAPL - P. No. 16 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing and fixing 600mm wide, 900mm height

Laminated Storage unit made in 310 grade 18mm thick

BWR Water proof Plywood boxing on all sides and 12mm

thick BWR Plywood at rear side of the box including

12mm thick BWR Plywood inner shelves. The top surface

of the counter to be 310 Grade 18mm thk. BWR Plywood

finished with 18mm Thk. approved GRANITE using

adhesive. The exposed surfaces of the box shall be finished

39 with 1.0mm thick approved make laminate, fixed using

approved adhesive and all edges to be of 2mm thick PVC Edge

beading. The quoted rate shall include the cost of providing and

fixing necessary hardwares like SS hinges, handles, locks, tower

bolts and ball catches, draw channels etc. all as per drawing,

instruction. (Top, Bottom & side storage unit)

NS Second Floor Sqm 8.00 44166.22 353329.76

PANTRY DADOOING: SIZE: 900mm Height for the length

specified in dwg.

Laying / Fixing of 900mm height of approved tiles as

dadooing in pantry area between top & bottom cabinet, using

1:3 proportion C.M. The 10mm thick Tiles of approved

make, shade and texture fixed to the wall surface using C.M

1:3 and the joints are filled with approved shade colour pigment

joint filler. The quoted rate shall include the cost of providing

and fixing appoved tiles using C.M, all materials, all labours,

lead and lifts, loading and unloading, HOM, all incidental

charges, providing and removal of scaffolding etc. at all level all

as per drawing, instruction.

NS Second Floor Sqm 6.00 3590.74 21544.44

LAMINATED STORAGE UNIT ABOVE COUNTER PARTIALLY

OPEN & PARTIALLY CLOSED: - for PANTRY Area

Providing and fixing 400mm wide, 600mm height

Laminated Storage unit made in 310 grade 18mm thick

BWR Water proof Plywood boxing on all sides for carcass

and shutter and 12mm thick BWR Plywood at rear side &

inner shelves and 18mm thick BWR Plywood for Open

shelves. All exposed faces shall be finished in 1.0mm thick

approved shade laminate and 0.8mm thick approved shade

41 laminate for unexposed / internal faces as per details. The unit

shall have a shelves made out of 310 Grade 18mm thk. BWR

Plywood. All exposed edges shall be PVC edge banding . The

quoted rate shall include the cost of providing and fixing

necessary hardwares like SS hinges, handles, locks, tower bolts

and ball catches, etc. all as per drawing, instruction and details

NS Second Floor Sqm 6.00 47048.96 282293.76

PANTRY STORAGE UNIT: SIZE: 600mm Deep & 800mm

Height for the length specified in dwg.for STAFF DINING

Providing and fixing 600mm deep, 800mm height,

Laminated storage units made in 310 grade 18mm thick

BWR Water proof Plywood boxing on all sides and 12mm

thick BWR Plywood at rear side of the box including

12mm thick BWR Plywood inner shelves. The top surface

of the counter to be 310 Grade 18mm thk. BWR Plywood

finished with Solid acrylic surface using adhesive. The

exposed surfaces of the box shall be finished with 1.0mm thick

approved make laminate (except counter top surface) and

0.8mm thick laminate for unexposed / internal faces, fixed

using approved adhesive and all edges to be of 2mm thick PVC

Edge beading. The quoted rate shall include the cost of

providing and fixing necessary hardwares like SS hinges,

handles, locks, tower bolts and ball catches, draw channels etc.

all as per drawing.

(Top, Bottom & side storage unit)

NS Second Floor Sqm 4.00 66937.86 267751.44

PANTRY DADOOING: SIZE: 700mm Height for the length

specified in dwg. for STAFF DINING Area

Laying / fixing 700mm height of approved tiles as

dadooing in pantry area between top & bottom cabinet, using

1:3 proportion C.M. The 10mm thick Tiles of approved make,

shade and texture fixed to the wall surface using C.M 1:3 and

the joints are filled with approved shade colour pigment joint

filler. The quoted rate shall include the cost of providing and

fixing appoved tiles using C.M, all materials, all labours, lead

and lifts, loading and unloading, HOM, all incidental charges,

providing and removal of scaffolding etc. at all level all as per

drawing, instruction.

NS Second Floor Sqm 4.00 3590.74 14362.96

LAMINATED STORAGE UNIT ABOVE COUNTER : - for

STAFF DINING Area

Digitally signed by DEEPAK

SAPL - P. No. 17 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing and fixing 400mm wide, 600mm height

Laminated Storage unit made in 310 grade 18mm thick

BWR Water proof Plywood boxing on all sides for carcass

and shutter and 12mm thick BWR Plywood at rear side &

inner shelves. All exposed faces shall be finished in 1.0mm

thick approved shade laminate and 0.8mm thick approved

shade laminate for unexposed / internal faces as per details.

44 The unit shall have a shelves made out of 310 Grade 18mm thk.

BWR Plywood. All exposed edges shall be PVC edge banding .

The quoted rate shall include the cost of providing and fixing

necessary hardwares like SS hinges, handles, locks, tower bolts

and ball catches, etc. all as per drawing.

NS Second Floor Sqm 2.00 35743.38 71486.76

LAMINATED OPEN SHELVES STORAGE UNIT NEXT TO

COUNTER: - for STAFF DINING Area

Providing and fixing 250mm wide, 400mm deep and

2100mm height Laminated Open Shelves Storage unit

made in 310 grade 18mm thick BWR Water proof Plywood

boxing on all sides for carcass and shutter and 12mm thick

BWR Plywood at rear side & inner shelves and 18mm thick BWR

Plywood for Open shelves. All exposed faces shall be finished in

1.0mm thick approved shade laminate and 0.8mm thick

approved shade laminate for unexposed / internal faces as per

details. The unit shall have a shelves and draws (if any) made

out of 310 Grade 18mm thk. BWR Plywood. All exposed edges

shall be PVC edge banding . The quoted rate shall include the

cost of providing and fixing necessary hardwares like SS hinges,

handles, locks, draw channel, tower bolts and ball catches, etc.

all as per drawing.

NS Second Floor Sqm 2.00 34834.78 69669.56

WRITING BOARD WITH LACQUERED GLASS: - PRIVATE

Providing, fabricating, and fixing writing board made of 6mm

thick LACQUERED GLASS of approved color and make, fixed

46 to partition framework, accessible from both sides for writing,

including polished edges, necessary fixtures, supports, and

accessories, as per approved drawings and instructions of

NS SECOND FLOOR Sqm 14.00 23860.78 334050.92

SINGLE GLAZED TOUGHENED GLASS PARTITIONS - WITH

ALEXA SYSTEM-45 FRAME PROFILES.

GLASS PARTITION: Supply and Fixing of Slim Glass partition

of 10mm Toughened Glass using Alexa System-45 Frames to a

height of maximum 3m or as per drawing.The Fixed glass to be

fixed using Alexa BP45 Profiles at Top & Bottom & Alexa SP45 at

sides. The profile size to be 45x25MM to be fixed on to the

floor/wall/ ceiling as per the architect design. Alexa H Junction

profile to be used at all Glass to Glass vertical joints, 90 Deg L

47 Junction Profiles and T Junction profiles necessary as per

design.In case of Glass overall panel Alexa MP45 & BP45

Overpanel Profile to be used.In case of Open glass edges EP45

End Profile to be used. The Alexa profiles shall be suitable for

Glass thickness of 10/12/13.52mm.The Profile shall be matt

natural anodized, the Profile Manufacturer to supply all the

necessary clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 20

Micron of Anodizing.

NS SECOND FLOOR Sqm 4.00 8494.82 33979.28

48 GYPSUM PARTITION WALL THICKNESS- 110MM

Providing and Fixing 110 mm thick Partition made of Double

board 15mm thick GRG(fireline) board on either side facing with

Aluminium frame work 50x50x2mm including 50mm thk 48 kg

Density Rockwool infill covered with LDPE sheet. aluminium

partition which includes inner layer of tapered edge 15mm

thick Gyproc® Fireline (conforming to IS:2095 – 1996-Part-I)&

outer layer of tapered edge 13mm thick Gyproc® Duraline

(conforming to BS 5234- 1992-part-2) is screw fixed with

drywall screws of 25mm & 35mm at 300mm centres to either

side of 50 x 50x2mm Aluminium Frame Work placed at 600mm

centre to centre, which is anchored to the floor & true ceiling

using suitable anchor fasteners or metal screws with PVC plugs.

The boards are to be fixed to the framework with joints

staggered to avoid leakage through joints.

Finally square and tapered edges of the boards are to be jointed

and finished so as to have a flush look which includes filling and

finishing with Gyproc Jointing compound, Gyproc Joint Paper

tape and two coats of Drywall Top Coat.

Special Provisions: Contractor to make cutouts for all electrical,

networking boxes as detailed in the drawing for which no extra

cost is payable.

Digitally signed by DEEPAK

SAPL - P. No. 18 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

NS Second Floor Sqm 36.00 10248.30 368938.80

LAMINATED OPEN STORAGE UNIT: - for CABINS

Providing and fixing Open Storage Cabinet of 600mm deep,

1500mm height, Laminated storage units made in 310

grade 18mm thick BWP Plywood boxing on all sides and

12mm thick BWP Plywood at rear side of the box including

12mm thick BWP Plywood inner shelves. The exposed

surfaces of the box includng top surface shall be finished with

1.0mm thick approved make laminate and 0.8mm thick

49 laminate for unexposed / internal faces, fixed using approved

adhesive and all edges to be of 2mm thick PVC Edge beading.

The quoted rate shall include the cost of providing and fixing

necessary hardwares like SS hinges, handles, locks, tower bolts

and ball catches, draw channels etc. all as per drawing,

instruction and details from Architect. - for Cabins

NS Second Floor Sqm 10.00 22297.28 222972.80

LAMINATED STORAGE UNIT COUNTER: - for Cabins

Providing and fixing 600mm deep, 900mm height, Laminated

storage units made in 310 grade 18mm thick BWP Plywood

boxing on all sides, for Carcass and Shutters and 12mm thick

BWP Plywood at rear side of the box including 12mm thick BWP

Plywood inner shelves. The exposed surfaces of the box

includng top surface shall be finished with 1.0mm thick

approved make laminate and 0.8mm thick laminate for

unexposed / internal faces, fixed using approved adhesive and

all edges to be of 2mm thick PVC Edge beading. The quoted

rate shall include the cost of providing and fixing necessary

hardwares like SS hinges, handles, locks, tower bolts and ball

catches, draw channels etc. all as per drawing.

NS Second Floor Sqm 8.00 42127.18 337017.44

LAMINATED STORAGE UNIT ABOVE COUNTER: - for

Providing and fixing 600mm Deep, 950mm height for the

specified length as per drawing, Laminated Storage unit made

in 310 grade 18mm thick BWR Water proof Plywood boxing

on all sides for carcass and shutter and 12mm thick BWR

Plywood at rear side & 18mm thick BWR Plywood for

shelves. All exposed faces shall be finished in 1.0mm thick

approved shade laminate and 0.8mm thick approved shade

51 laminate for unexposed / internal faces as per details. The unit

shall have a shelves made out of 310 Grade 18mm thk. BWR

Plywood. All exposed edges shall be PVC edge banding . The

quoted rate shall include the cost of providing and fixing

necessary hardwares like SS hinges, handles, locks, tower bolts

and ball catches, etc. all as per drawing

NS Second Floor Sqm 12.00 40780.80 489369.60

COLUMN CLADDING: CABINS

Providing & fabricating Column cladding with 18mm thk.

BWP Ply wood upto false ceiling Height. from floor finish and

the panelling shall be 80mm away from column surface using

50mmx50mmx2mm Thk. Aluminium box section frame

work. The over all cladding shall be 80mm thk. including

18mm thk BWP Ply wood with 1mm Thk. matte finish

approved laminate and 4mm thk. groove at specified

location as shown in the drawing. The panel shall be fixed

on the frame work & the Laminate shall be of approved design

and colour as shown in detail.

NS Second Floor Sqm 12.00 9402.24 112826.88

LAMINATED STORAGE UNIT COUNTER: - for OFFICE

SIZE: 600mm Deep & 900mm Height for the length

specified in dwg.

Providing and fixing 600mm deep, 900mm height,

Laminated storage units made in 310 grade 18mm thick

BWP Plywood boxing on all sides (except top surface), for

Carcass and Shutters and 12mm thick BWP Plywood at rear

side of the box including 12mm thick BWP Plywood for inner

shelves and draw. The top surface of the storage unit to be 310

Grade 25mm Thk. BWP Plywood. The unit shall have

shelves & draw. The exposed surfaces of the box excludng top

surface shall be finished with 1.0mm thick approved make

laminate and 0.8mm thick laminate for unexposed / internal

faces, fixed using approved adhesive and all edges to be of

2mm thick PVC Edge beading. The quoted rate shall include the

cost of providing and fixing necessary hardwares like SS hinges,

handles, locks, tower bolts and ball catches, draw channels etc.

all as per drawing, instruction and details from Architect. - for

Work Station Area

Digitally signed by DEEPAK

SAPL - P. No. 19 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

NS Second Floor Sqm 10.00 36233.08 362330.80

LAMINATED STORAGE UNIT ABOVE COUNTER: - for

OFFICE SUPPLY AREA

Providing and fixing 600mm Deep, 900mm height for the

specified length as per drawing, Laminated Storage unit made

in 310 grade 18mm thick BWP Plywood boxing on all sides for

carcass and shutter and 12mm thick BWR Plywood at rear side

& 18mm thick BWR Plywood for shelves. All exposed faces shall

be finished in 1.0mm thick approved shade laminate and

0.8mm thick approved shade laminate for unexposed / internal

faces as per details. The unit shall have a shelves made out of

310 Grade 18mm thk. BWP Plywood. All exposed edges shall be

PVC edge banding . The quoted rate shall include the cost of

providing and fixing necessary hardwares like SS hinges,

handles, locks, tower bolts and ball catches, etc. all as per

drawing, instruction and details from Architect. - for Work

NS Second Floor Sqm 10.00 38440.86 384408.60

LAMINATE FOR STORAGE UNIT COUNTER TOP: OFFICE

Providing and fixing 1.0mm thick approved laminate for counter

top using approved adhesive in Work Station area including

edge beading all as per the drawing, direction and instruction of

EIC at all levels.

NS Second Floor Sqm 8.00 8642.32 69138.56

ACCOUSTIC PINUP BOARD WALL IN SHADE OF PEACOCK

CREST SIZE: (10800mm x 1050mm Height) - OFFICE

Supply & Installation of Techno make Acoustic PET panels and

ply (310 grade 12mm Thk. BWP Ply (Non Woven Polyester

fibre Panels) with aluminium framing and polywool wadding as

backing with over all thickness of 70mm from the surface.

SPECS: Acoustic PET Panels (Non woven polyester fibre

Acoustical panel) has 12mm thickness and has density of 160

Kg/m³. The size of each panel is as per drawing.. These PET

Panels can be cut into size and shape as designed by the

architect or engineer in charge. Acoustic PET panel is a

homogenious product and is available in more than 30 Pre

finished colours. a Techno Acoustic Panel is mounted on the wall

with aluminium framing of 25mm high and the air gap between

the wall and the PET Panel to be filled with 45-50mm thick

polyester wadding having density 1000gsm, forming a system

thickness of 60mm the system thus formed to have Sound

Absorbtion 0.9 NRC and weighted sound absorbtion of 0.95.

NS Second Floor Sqm 14.00 14693.36 205707.04

SPLASH BOARD: OFFICE SUPPLY AREA

Providing & fabricating wall panelling with ply upto height of

150mm as mentioned in the drawing on all walls using 310

Grade 18mm thick BWP ply. The over all cladding shall be in

line with the pinup board level. The Wall panel including 18mm

thk BWP ply with approved shade 1mm Thk. APPROVED

laminate finish. The Laminate shall be of approved design and

colour as shown in detail drawing, design and instruction of

NS Second Floor Rmt 10.00 2872.12 28721.20

GLASS PARTITION WITH PEACOCK CREST POWDER

COATED ALUMINIUM FRAME WORK: QUITE ZONE

Supply & Installation of Glass partition with 60 Micron powder

coated approved shade finish aluminium framing of

section 50mm x 25mm x 2mm / as per the design and the

gap filled with 8mm thick Plain Clear Glass. The powder coated

approved shade Aluminium frame work will be as per the details

also includes extra frame work for fixing pin up board and

writing board using above frame work sections all as per

drawing, detailing and instruction of EIC.

NOTE: Approval to be taken for the frame work from the

Engineer In-charge before executing by submitting shop

drawing and design calculation sheet.

NS Second Floor Sqm 38.00 30547.84 1160817.92

ACCOUSTIC PINUP BOARD WALL IN SHADE OF PEACOCK

CREST - QUITE ZONE: SIZE: As per drawing details

Digitally signed by DEEPAK

SAPL - P. No. 20 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Provide, supply, and install Techno make Acoustic PET Panels

comprising 310-grade 12 mm thick BWP Plywood backing,

finished with non-woven polyester fibre acoustic PET

panels, complete with aluminium framing and polywool

wadding as acoustic infill, achieving an overall finished

thickness of 70 mm from the surface. Panels shall be

factory-cut, neatly finished, and installed as per approved

layout, ensuring proper alignment and acoustic performance.

The assembly shall be fixed onto the glass partition aluminium

framework, with all provisions already made in the frame for pin-

up board installation. Work includes all materials, labour,

accessories, trimming, joint finishing, and fixing hardware

required to complete the installation as per drawings.

SPECS: Acoustic PET Panels (Non woven polyester fibre

Acoustical panel) has 12mm thickness and has density of 160

Kg/m³. The size of each panel is as per drawing.. These PET

Panels can be cut into size and shape as designed by the

architect or engineer in charge. Acoustic PET panel is a

homogenious product and is available in more than 30 Pre

finished colours. a Techno Acoustic Panel is mounted on the wall

with aluminium framing of 25mm high and the air gap between

the wall and the PET Panel to be filled with 45-50mm thick

polyester wadding having density 1000gsm, forming a system

thickness of 60mm the system thus formed to have Sound

Absorbtion 0.9 NRC and weighted sound absorbtion of 0.95.

NS Second Floor Sqm 8.00 14693.36 117546.88

WRITING BOARD WITH LACQUERED GLASS:

Providing, fabricating, and fixing writing board made of 6mm

thick lacquered glass of approved color and make, securely

fixed to the partition framework and accessible from one side

for writing. The glass shall have polished, safe edges and a

smooth, high-quality surface suitable for use with dry-erase

markers. The assembly shall be mounted onto the glass

partition aluminium framework of 50mmx25mmx2mm /

as per the design requirement, utilizing the provisions

already made in the frame for writing board installation. Work

includes all materials, labour, necessary fixtures, supports,

accessories, trimming, joint finishing, and fixing hardware

required to complete the installation in accordance with

approved drawings.

NS Second Floor Sqm 8.00 23860.78 190886.24

LAMINATED STORAGE UNIT BOX WITH PLANTERS: - for

Quite Zone Area

SIZE: 650mm Deep & 1200mm Height including planters space

for the length specified in dwg.

Providing and fixing 650mm deep, 900mm height, Laminated

storage units and 300mm height (Total 1200mm) BWR ply

partion made in 310 grade 18mm thick BWR Water proof

Plywood for carcass and shutters. The shutter edges alround

shall be finished with PVC edge binding. The back of storage

unit shall be in 310 Grade 12mm thick BWR Ply. The top surface

of the counter to be 310 Grade 25mm BWR Plywood. All

exposed faces (except Counter Top) shall be finished in 1.0mm

61 thick approved shade laminate and 0.8mm thick approved

shade laminate for unexposed / internal faces as per details.

The unit shall have a shelves & draw made out of 310 Grade

19mm BWR Plywood. All exposed edges shall be PVC edge

banding . The quoted rate shall include the cost of providing

and fixing necessary hardwares like SS hinges, handles, locks,

tower bolts and ball catches, draw channels etc. all as per

drawing - for Work Station Area

NS Second Floor Sqm 6.00 30605.66 183633.96

AV RACK WITH 18MM BWP PLY FINISHED WITH WPC

PANEL. Size (810 x 810 mm) - CONFERENCE ROOM

Digitally signed by DEEPAK

SAPL - P. No. 21 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing and fixing 810mm x 810mm AV rack boxing

made of 18mm thk BWP Ply backing. There shall be

storage cabinet with frame with shutters made out of 18mm

thick BWP Ply . The shutters shall be made of 18mm thk.

BWP Ply and laminated with 5mm thick WPC sheet all

sides as per detailed drg. The shutter shall be finished with

5mm thick WPC Sheet of approved shade. The AV rack boxed

fixed to masonry / concrete / partition using 50x25x2mm

aluminium frame work, which anchored to the rigid surface

using anchor bolts / nailing. The unit inside shall have 18mm

thk BWP Ply boxing and laminated with 0.8mm thick laminate

on the inner surface. The unit shall have 100mm high skirting.

The skirting shall be finished with veneer of the same colour as

the outer facia. the storage shall have a drawer unit on top and

shelves at the bottom as per the detailed drg. The rate shall

include the cost of necessary hardwares like SS cut hinges , SS

handles, ball catches, tower bolts & lock etc., of approved

NS Second Floor Sqm 4.00 93263.66 373054.64

COLUMN CLADDING with 18MM PLY FINISHED WITH

WPC SHEET: CONFERENCE ROOM

Providing & fabricating Column cladding with 18mm thk.

BWP Ply wood upto false ceiling Height. from floor finish and

the panelling shall be 80mm away from column surface using

50mmx50mmx2mm Thk. Aluminium box section frame work.

The over all cladding shall be 80mm thk. including 18mm thk

63 BWP Ply wood with 5mm Thk. WPC sheet of approved shade

and 4mm thk. groove at specified location as shown in the

drawing. The wpc sheet shall be of approved design and colour

as shown in detail drawing, design.

NS Second Floor Sqm 6.00 19239.90 115439.40

65MM THK GYPSUM WALL LINING (GYPSUMBOARD) -

64 CEMENT TEXTURE PAINT APPROVED PAINT shade FROM

1. 62.5mm(Min.) thick Wall lining with GypSerra™ C-stud which

includes single layer of tapered edge 12.5mm thick Gyproc®

Habito (conforming to EN 520: 2004, A1:2009, Type A,D,R,I

along with the transverse strength of 550 N and longitudinal

strength of 1090 N ,Thermal Conductivity: 0.24 (w/mºK)

Thermal resistance: 0.05 (m2K/w) and pull out strength of

>600N & density between 960 to 987 kg/m3, Specially designed

to give flexibility of static loading without any ply or combustible

material as a support or backing anywhere on the drywall to

utilize space in a fast and functional way, should be able to take

even unplanned static load upto 30Kg point load with regular

number 10 wood screw at minimum spacing of 150 mm and

board size 1220x2440mm is screw fixed to C-stud which is

placed adjacent to brick/RCC wall.

2. 48x0.5mm GypSerra™ C-stud {Material-IS 513,Y/S-300Mpa,

Finish - AZ150 (IS 15961)} placed at 610mm c/c in 50x0.5mm

GypSerra™ {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS

15961} floor and ceiling channel.

3. Floor & Ceiling channel is anchored to the floor & True ceiling

using Gyproc® Rawl plug Ø8x45mm {Material-IS 513 CR1

grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete

grade} /Hilti Nail anchor fasteners at 600mm c/c in centerline

4. 50x32x32x0.5mm GypSerra™ Floor channel to be cut & bend

& bracing at every 1200mm c/c vertically. Floor channel is fixed

to brick wall with Sleeve Anchor (Ø6x40mm)/ Impact anchor or

to RCC with Gyproc® Rawl Plug.

5. Floor channel to be wrapped with 70µ Self Adhesive LDPE

moisture barrier film to further improve corrosion resistance

6. A GypSerra™ Noggin channel {Material-IS 513,Y/S-300Mpa,

Finish - AZ150 (IS 15961)} of 48x0.5mm width has to be

provided at the horizontal joints of outer boards.

7. Single layer of 12.5mm Thick Gypsum board to be screw

fixed with Gyproc® Habito screws of 25mm at minimum

spacing of 300 mm at centre and 150 mm at periphery.

Digitally signed by DEEPAK

SAPL - P. No. 22 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

8. Finally square and tapered edges of the boards are to be

jointed and finished so as to have a flush look which includes

filling and finishing with Gyproc® Pro-Fill Jointing compound Air

Dry (Conforms to ASTM C475), Joint Paper tape.

9. The junction of the partition with masonry & all penetration

through the partition has to be treated with Acoustic sealant.

10. All other detailing and specifications to be followed as per

approved drawing. Note:

1. For heights between 4200mm and 8000mm, Deep Flange

Ceiling Channel should be used at head (subject to deflection

2. Maximum reachable wall heights are based on L/240 at

3. Control Joint has to be provided at every 10 Mtr. c/c. along

the length of wall.

NS Third floor Sqm 60.00 2277.40 136644.00

WALL MOUNTED CONSOLE TABLE MADE WITH MDF

FINISHED WITH APPROVED SHADE LAMINATE:

Providing, fabricating, and fixing WALL MOUNTED CONSOLE

TABLE made out of 18mm thick Medium Density

Fibreboard (MDF) of approved make and quality, cut and

assembled as per approved design, size, and profile. The table

shall be securely fixed to the wall using concealed MS brackets

or frame supports designed to carry the required load

and maintain alignment. All exposed surfaces of the MDF

shall be finished with 1.0 mm thick approved LAMINATE of

approved make, shade, and texture, fixed with synthetic resin

adhesive. Edges shall be finished neatly with 2 mm PVC edge

65 band to achieve a clean and seamless appearance. All

unexposed surfaces shall be finished with balancing laminate or

two coats of synthetic enamel paint to prevent warping. The

item shall include all materials, adhesives, edge trims, MS

supports, hardware, accessories, labour, and tools necessary

for proper fabrication, installation, and finishing of the unit, all

labours, HOM, lead and lift, loading and unloading, providing

and removal of scaffolding, all incidental charges, etc., all

complete as per approved drawings and instructions of the EIC.

TV BACK MADE WITH MDF AND FINISHED WITH CEMENT

TEXTURE PAINT - APPROVED PAINT shade FROM

SCIENCE TEAM WITH WARM ORANGE COVE LIGHT IN

PLYWOOD PANEL finished with APPROVED SHADE PAINT

AS PER SELECTION:

Providing, fabricating, and installing wall cladding comprising

12mm thick BWP Plywood finished with 6mm HDF

facing, installed as per mentioned height. The cladding shall be

fixed 80mm away from the existing wall using a

50×50×2mm thick aluminium framework, spaced at

600×600mm c/c both horizontally and vertically. The

framework shall be fully aligned, levelled, and securely

anchored using approved anchor fasteners to ensure stability

66 The complete cladding system shall achieve an overall thickness

of 80mm, including plywood, HDF, and the air gap. Cladding

panels shall be installed on the aluminium framework using

concealed screws or other approved fixing systems. The visible

surface shall be finished with approved cement texture paint of

designated design, colour, and texture as per architectural

approval. The edges and cut-outs shall be properly finished

using edge-banding or approved sealing methods.

NS Third floor Sqm 10.00 9074.20 90742.00

WALL MOUNTED CONSOLE TABLE MADE WITH MDF

FINISHED WITH DARK GREY LAMINATE:

Digitally signed by DEEPAK

SAPL - P. No. 23 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing, fabricating, and fixing WALL MOUNTED CONSOLE

TABLE made out of 18mm thick Medium Density

Fibreboard (MDF) of approved make and quality, cut and

assembled as per approved design, size, and profile. The table

shall be securely fixed to the wall using concealed MS

brackets or frame supports designed to carry the required

load and maintain alignment. All exposed surfaces of the MDF

shall be finished with 1.0 mm thick LAMINATE of approved

make, shade, and texture, fixed with synthetic resin adhesive.

Edges shall be finished neatly with 2 mm PVC edge band to

achieve a clean and seamless appearance. All unexposed

67 surfaces shall be finished with balancing laminate & two coats

of synthetic enamel paint with 2 coats of Zinc rich primer for

strucctural steel work to prevent warping. The item shall include

all materials, adhesives, edge trims, MS supports, hardware,

accessories, labour, and tools necessary for proper fabrication,

installation, and finishing of the unit, all labours, HOM, lead and

lift, loading and unloading, providing and removal of

scaffolding, all incidental charges, etc., all complete as per

approved drawings and instructions of the Engineer in charge of

PANTRY STORAGE UNIT: SIZE: 600mm Deep & 900mm

Height for the length specified in dwg.

Providing and fixing 600mm wide, 900mm height Laminated

Storage unit made in 310 grade 18mm thick BWR Water

proof Plywood boxing on all sides and 12mm thick BWR

Plywood at rear side of the box including 12mm thick

BWR Plywood inner shelves. The top surface of the

counter to be 310 Grade 18mm thk. BWR Plywood

finished with 18mm Thk. approved granite using

68 adhesive. The exposed surfaces of the box shall be finished

with 1.0mm thick approved make laminate, fixed using

approved adhesive and all edges to be of 2mm thick PVC Edge

beading. The quoted rate shall include the cost of providing and

fixing necessary hardwares like SS hinges, handles, locks, tower

bolts and ball catches, draw channels etc. all as per drawing,

instruction(Top, Bottom & side storage unit)

NS Third floor Sqm 4.00 41725.98 166903.92

LAMINATED STORAGE UNIT ABOVE COUNTER PARTIALLY

OPEN & PARTIALLY CLOSED: - for PANTRY Area

Providing and fixing 400mm wide, 600mm height Laminated

Storage unit made in 310 grade 18mm thick BWR Water proof

Plywood boxing on all sides for carcass and shutter and 12mm

thick BWR Plywood at rear side & inner shelves and 18mm thick

BWR Plywood for Open shelves. All exposed faces shall be

finished in 1.0mm thick approved shade laminate and 0.8mm

thick approved shade laminate for unexposed / internal faces as

69 per details. The unit shall have a shelves made out of 310

Grade 18mm thk. BWR Plywood. All exposed edges shall be PVC

edge banding . The quoted rate shall include the cost of

providing and fixing necessary hardwares like SS hinges,

handles, locks, tower bolts and ball catches, draw channels,

provision to be made for fixing LED SCALE LIGHT, etc. all as per

NS Third floor Sqm 4.00 61778.90 247115.60

JET BLACK GRANITE FOR STORAGE UNIT COUNTER TOP:

Providing and fixing 18mm thick approved shade and

pattern JET Black Granite using approved made adhesive

for counter top in Pantry area including 6mmx6mm edge

chamfering, polishing, grinding, cutting, etc., complete all as

per the drawing, direction and instruction of EIC at all levels.

NS Third floor Sqm 4.00 5556.62 22226.48

PANTRY STORAGE UNIT BACK SPLASH: SIZE: 700mm

Height for the length specified in dwg. for STAFF DINING

Laying / Fixing of 700mm height of approved tiles as

dadooing in pantry area between top & bottom cabinet, using

1:3 proportion C.M. The 10mm thick Tiles of approved make,

shade and texture fixed to the wall surface using C.M 1:3 and

the joints are filled with approved shade colour pigment joint

71 filler. The quoted rate shall include the cost of providing and

fixing appoved tiles using C.M, all materials, all labours, lead

and lifts, loading and unloading, HOM, all incidental charges,

providing and removal of scaffolding etc. at all level all as per

NS Third floor Sqm 6.00 3590.74 21544.44

IRREGULAR SHAPE MIRROR:

Digitally signed by DEEPAK

SAPL - P. No. 24 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Providing, supplying and fixing 6mm thick Irregular Shaped /

architect approved shape mirror (Max. width of 600mm &

Ht. of 1200mm) with Stainless Steel Box section Frame work

as indicated in the detailed drawing of 25x25x1.2mm thick.

72 Providing, fabricating & fixing in position of Stainless Steel box

section as indicated in the detailed drawing. All the exposed

Stainless Steel surfaces shall be finished in Brass Shade PVD

coating as per the detailed drawing.

NS Third floor No 1.00 16676.94 16676.94

LAMINATED STORAGE UNIT PARTIALLY OPEN &

PARTIALLY CLOSED: - for POWDER ROOM Area

Providing and fixing 250mm deep, 1000mm height

Laminated Storage unit made in 310 grade 18mm thick BWR

Water proof Plywood boxing on all sides and 12mm thick

BWR Plywood at rear side of the box including 12mm

thick BWR Plywood inner & exposed shelves. The exposed

surfaces of the box shall be finished with 1.0mm thick approved

73 make laminate, fixed using approved adhesive and all edges to

be of 2mm thick PVC Edge beading. The quoted rate shall

include the cost of providing and fixing necessary hardwares

like SS hinges, handles, locks, tower bolts and ball catches,

draw channels etc. all as per drawing

NS Third floor Sqm 2.00 34814.72 69629.44

FALSE CEILING WORKS

Wave Accoustic Baffle False Ceiling (Suspended): For

Supply of Techno Acoustic Wavy baffle made of Techno Acoustic

PET panels 10mm Thickness of 1800-2000 GSM in the required

Techno Acoustic Baffle will consist designed wave pattern of the

maximum Height 150mm and 10 mm thickness . The wave

form on the bottom edge will be uniformly and smoothly cut on

74 CNC machines with clean bottom edge. The top edge would be

straight and will be attached to aluminum extruded U profile of

13*18*2mm with sliding option on top side for 6 mm threaded

bolts for suspension of the baffles. The aluminium profile

inserted on to the top of the wave baffle will be secured with

special glue and screw fixed from the top. The bolt positions on

the extruded profile may be shifted and secured as per the

suspension locations on the slotted C Channel above.

The individual wave baffles would be fixed to the Slotted C

Channel suspension (through the bolt and nut) at a center to

center distance of 175 mm . The suspension system

consisting of perforated & powder coated 0.8mm thick GI

channel 20*40*15 mm placed at 1200 to 2000 mm depending

upon the required layout and installation drawings. The

channels could be either suspended directly from the slab by

means of 6mm threaded rod. Alternately a secondary powder

coated C channels of 0.8mm thick may be used in case of

design requirements.

The baffle-to-baffle joints can be attached to each other by

means of a 150 mm connecting channel or one may plan to

leave a gap as per design requirements.

NS Second Floor Sqm 74.00 12648.42 935983.08

Wave Accoustic Baffle False Ceiling (Suspended): -

CONFERENCE ROOM

Supply of Techno Acoustic Wavy baffle made of Techno Acoustic

PET panels 10mm Thickness of 1800-2000 GSM in the required

Techno Acoustic Baffle will consist designed wave pattern of the

maximum Height 150mm and 10 mm thickness . The wave

form on the bottom edge will be uniformly and smoothly cut on

CNC machines with clean bottom edge. The top edge would be

straight and will be attached to aluminum extruded U profile of

13*18*2mm with sliding option on top side for 6 mm threaded

bolts for suspension of the baffles. The aluminium profile

inserted on to the top of the wave baffle will be secured with

special glue and screw fixed from the top. The bolt positions on

the extruded profile may be shifted and secured as per the

suspension locations on the slotted C Channel above.

Digitally signed by DEEPAK

SAPL - P. No. 25 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

The individual wave baffles would be fixed to the Slotted C

Channel suspension (through the bolt and nut) at a center to

center distance of 175 mm . The suspension system

consisting of perforated & powder coated 0.8mm thick GI

channel 20*40*15 mm placed at 1200 to 2000 mm depending

upon the required layout and installation drawings. The

channels could be either suspended directly from the slab by

means of 6mm threaded rod. Alternately a secondary powder

coated C channels of 0.8mm thick may be used in case of

design requirements.

The baffle-to-baffle joints can be attached to each other by

means of a 150 mm connecting channel or one may plan to

leave a gap as per design requirements.

NS Second Floor Sqm 90.00 12648.42 1138357.80

76 PAINT FINISH - PIGEON GREY PAINT WITH CEMENT TEXTURE

NS GROUND FLOOR Sqm 732.00 791.78 579582.96

NS SECOND FLOOR Sqm 16.00 791.78 12668.48

PAINT FINISH - WINTER MOON PAINT WITH CEMENT TEXTURE

(Wall Painting)

NS GROUND FLOOR Sqm 394.00 791.78 311961.32

NS SECOND FLOOR Sqm 166.00 791.78 131435.48

NS THIRD FLOOR Sqm 36.00 791.78 28504.08

CEMENT TEXTURE PAINT - APPROVED PAINT shade FROM

78 SCIENCE TEAM WITH STENCIL STUCCO FOR 20% OF THE WALL

FINISHED IN GREY SHADE AND COPPER BRUSHING

NS THIRD FLOOR Sqm 290.00 2698.66 782611.40

CEMENT TEXTURED POP FINISHED WITH ORANGE- COPPER

NS Third floor Sqm 4.00 2698.66 10794.64

80 Base Paint in shade of AP Pure Cotton L172

NS SECOND FLOOR Sqm 204.00 791.78 161523.12

81 Base Paint in shade of Whisper White as per approval

NS SECOND FLOOR Sqm 56.00 791.78 44339.68

Providing fabricating and fixing Double Leaf / Single Leaf

Flush shutter door made out of 35mm thick door shutter

finished with 1.0mm thick approved laminate on both sides as

indicated in detailed drawing. All Shutter edges finished with

2mm thick PVC Edge binding.

Door frame : Seasoned BEACH Wood door frame of 45mm x

100mm section of approved profile. The surface in contact with

the partition / wall shall be painted or treated with antitermite

paint of approved make before erection and all exposed

surfaces shall be finished with Polyurethane paint. The door

shall have teakwood architrive all around the frame

45mmx12mm & edge banding around.complete as per

drawings.The frame and achitrive to be finished with

Polyurethane paint of approved shade & brand.

Vision Panel in Doors - The shutter shall be provided with

vision panel of size 200 x 1800 / as mentioned in the

drawing using 6mm thk TOUGHENED clear Glass with 4mm thk

timber beading all around the glass finished with PU Paint as

per detail drawing

Door Hardware : Rate should include supply and installation of

door and hardware at all levels with screws set as mentioned in

the door and hardware schedule as below. All the fixtures are

Brush Steel finish . (The Shade, pattern, fixtures etc., to be

approved by EIC).

DT 01A - 1000 x 2400 - FLUSH DOOR - SINGLE SHUTTER

82 : - For PANTRY & DOC STORE, etc.,

The Hardware set for the Door are mentioned below :

1. 450mm H - Handle in pair , 25.4mm Dia , Product shade -

2. Mortise Dead Lock , Product shade - ML102SS - 1 No

3. Euro profile Cylinder both side key 60mm, Product shade -

4. Stainless Steel 2 Ball Bearing Hinge 5 x 3 x 3mm, Product

shade -HG1154SS - 4 Nos

5. 24" Tower Bolt, Product shade - TS2410SS - 1 No

6. Door Closure Max upto 80Kg, Product shade - DC80PDC - 1

NS SECOND FLOOR Nos. 2.00 62988.40 125976.80

Digitally signed by DEEPAK

SAPL - P. No. 26 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

DT 3A - 1500 x 2400 - Digital Server Room, Supply and

Maintenance Room, Store Room & Corridor

The Hardware set for the Door are mentioned below:

1. 450mm H - Handle in pair , 25.4mm Dia , Product shade -

SH18PSS - 2 Nos

2. Mortise Dead Lock , Product shade - ML102SS - 1 No

3. Euro profile Cylinder both side key 60mm, Product shade -

4. Stainless Steel 2 Ball Bearing Hinge 5 x 3 x 3mm, Product

shade -HG1154SS - 8 Nos

5. 24" Tower Bolt, Product shade - TS2410SS - 2 Nos

6. 8" Tower Bolt, Product shade - TS810SS - 2 Nos

7. Door Closure Max upto 80Kg, Product shade - DC80PDC - 1

NS FIRST FLOOR Nos. 2.00 115949.16 231898.32

NS SECOND FLOOR Nos. 3.00 115949.16 347847.48

NS THIRD FLOOR Nos. 1.00 115949.16 115949.16

DT 5A - 2000 x 2400 - Corridor

The Hardware set for the Door are mentioned below:

1. 450mm H - Handle in pair , 25.4mm Dia , Product shade -

SH18PSS - 2 Nos

2. Mortise Dead Lock , Product shade - ML102SS - 1 No

3. Euro profile Cylinder both side key 60mm, Product shade -

84 4. Stainless Steel 2 Ball Bearing Hinge 5 x 3 x 3mm, Product

shade -HG1154SS - 8 Nos

5. 24" Tower Bolt, Product shade - TS2410SS - 2 Nos

6. 8" Tower Bolt, Product shade - TS810SS - 2 Nos

7. Door Closure Max upto 80Kg, Product shade - DC80PDC - 1

NS SECOND FLOOR Nos. 1.00 97955.34 97955.34

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL.

Supply & Fixing of Aluminium Glazed Door (Single Leaf) with

Glass infill of 13.52mm thk toughened glass with DORMA

Alexa System-100/70 frames Stiles all around the door.

Aluminium Stile to be formed out of 100x45mm or

70mmx45mm of Alexa STP100 Door Profile frame with clips &

seals , service panel profile for access reader portal 100X70mm

with rebate clip DORMA Flush Hinges (4Nos) & Pure 8100 Lever

Handle 952 Narrow stile Lock package/TG 9356 Pull Handle 917

Narrow stile Dead Lock package and DORMA TS 96 EN4 Cam

Action concealed Door closer (as per EN 1154) with Hold Open

unit necessary seals to be provided all around the door frames.

For doors part of single/double glazed partiton DP100-SG/DG

Door rebate profile to be used.In case of Glass overall panel

Alexa OHPDP100-SD/DG Over Panel Door profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be matt natural anodized, the Profile

Manufacturer to supply all the necessary clips, seals and fixing

accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 20

Micron of Anodizing. Provision to be made for ACCESS

NOTE: APPROVAL to be taken from the Engineer In-charge BY

SUBMIITTING Shop Drawings along with calculation sheet

before starting of execution work.

ID 04 - 1000 x 2400 - Clock Room & DH

NS GROUND FLOOR Nos 4.00 182271.06 729084.24

NS FIRST FLOOR Nos 2.00 182271.06 364542.12

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL.

Digitally signed by DEEPAK

SAPL - P. No. 27 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Supply & Fixing of Aluminium Glazed Door (Single Leaf /

Double) with Glass infill of 13.52mm thk Partially Frosted

glass with DORMA Alexa System-100/70 frames Stiles all

around the door. Aluminium Stile to be formed out of

100x45mm or 70mmx45mm of Alexa STP100 Door Profile

frame with clips & seals , service panel profile for access reader

portal 100X70mm with rebate clip DORMA Flush Hinges (4Nos

for single leaf & 8 Nos. for Double Leaf) & Pure 8100 Lever

Handle 952 Narrow stile Lock package/TG 9356 Pull Handle (2

Nos. for Single Leaf & 4 Nos. for Double leaf) 917 Narrow stile

Dead Lock package and DORMA TS 96 EN4 Cam Action

concealed Door closer (as per EN 1154) with Hold Open unit

necessary seals to be provided all around the door frames. For

doors part of single/double glazed partiton DP100-SG/DG Door

rebate profile to be used.In case of Glass overall panel Alexa

OHPDP100-SD/DG Over Panel Door profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be matt natural anodized, the Profile

Manufacturer to supply all the necessary clips, seals and fixing

accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 20

Micron of Anodizing. Provision to be made for ACCESS

NOTE: APPROVAL to be taken from the Engineer in charge of

work, Project Manager BY SUBMIITTING Shop Drawings along

with calculation sheet before starting of execution work.

ID 04 - 1100 x 2400 - Staff Room, BOH, LOBBY & Dining

NS FIRST FLOOR Nos 2.00 185698.96 371397.92

ID 06 - 1500 x 2400 -Staff Breakout Area & Operations

NS SECOND FLOOR Nos 2.00 284864.98 569729.96

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL - SWING DOOR

Supply & Fixing of Aluminium Glazed Door (Single Leaf) with

Glass infill of 13.52mm thk Partially Frosted glass with

DORMA Alexa System-100/70 frames Stiles all around the door.

Aluminium Stile to be formed out of 100x45mm or

70mmx45mm of Alexa STP100 Door Profile frame with clips &

seals , service panel profile for access reader portal 100X70mm

with rebate clip DORMA Top Hung Patch Fitting (1Nos),

Heavy Duty Floor spring (to withstand wind load of 150

kgs/ cum) & Pure 8100 Lever Handle 952 Narrow stile Lock

package/TG 9356 Pull Handle 917 Narrow stile Dead Lock

package and DORMA TS 96 EN4 Cam Action concealed Door

closer (as per EN 1154) with Hold Open unit necessary seals to

be provided all around the door frames. For doors part of

single/double glazed partiton DP100-SG/DG Door rebate profile

to be used.In case of Glass overall panel Alexa OHPDP100-

SD/DG Over Panel Door profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be of approved shade Powder

coated, the Profile Manufacturer to supply all the necessary

clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 50

Micron of approved shade Powder coating. Provision to be

made for ACCESS CONTROL.

Approved Manufacturer: Profiles/Frames: DORMA, Glass : Saint

NOTE: APPROVAL to be taken from the Engineer in charge of

work BY SUBMIITTING Shop Drawings along with calculation

sheet before starting of execution work.

88 ID 06 - 1000 x 2400 - OFFICE AREA

NS FIRST FLOOR Nos 1.00 182271.06 182271.06

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL - TOUGHENED

Digitally signed by DEEPAK

SAPL - P. No. 28 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Supply & Fixing of Aluminium Glazed Door (Single Leaf) with

Glass infill of 13.52mm thk TOUGHENED CLEAR GLASS with

DORMA Alexa System-100/70 frames Stiles all around the door.

Aluminium Stile to be formed out of 100x45mm or

70mmx45mm of Alexa STP100 Door Profile frame with clips &

seals , service panel profile for access reader portal 100X70mm

with rebate clip DORMA Top Hung Patch Fitting (1Nos),

Heavy Duty Floor spring (to withstand wind load of 150

kgs/ cum) & Pure 8100 Lever Handle 952 Narrow stile Lock

package/TG 9356 Pull Handle 917 Narrow stile Dead Lock

package and DORMA TS 96 EN4 Cam Action concealed Door

closer (as per EN 1154) with Hold Open unit necessary seals to

be provided all around the door frames. For doors part of

single/double glazed partiton DP100-SG/DG Door rebate profile

to be used.In case of Glass overall panel Alexa OHPDP100-

SD/DG Over Panel Door profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be of approved shade Powder

coated, the Profile Manufacturer to supply all the necessary

clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 50

Micron of approved shade Powder coating. Provision to be

made for ACCESS CONTROL.

NOTE: APPROVAL to be taken from the Engineer in charge of

workBY SUBMIITTING Shop Drawings along with calculation

sheet before starting of execution work.

NS SECOND FLOOR Nos 3.00 109482.76 328448.28

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL - DOUBLE

Supply & Fixing of Aluminium Glazed Door (Double Leaf) with

Glass infill of 13.52mm thk Toughened Clear glass with

DORMA Alexa System-100/70 frames Stiles all around the door.

Aluminium Stile to be formed out of 100x45mm or

70mmx45mm of Alexa STP100 Door Profile frame with clips &

seals , service panel profile for access reader portal 100X70mm

with rebate clip DORMA Top Hung Patch Fitting (2Nos),

Heavy Duty Floor springs (to withstand wind load of 150

kgs/ cum) & Pure 8100 Lever Handle 952 Narrow stile Lock

package/TG 9356 Pull Handle 917 Narrow stile Dead Lock

package and DORMA TS 96 EN4 Cam Action concealed Door

closer (as per EN 1154) with Hold Open unit necessary seals to

be provided all around the door frames. For doors part of

single/double glazed partiton DP100-SG/DG Door rebate profile

to be used.In case of Glass overall panel Alexa OHPDP100-

SD/DG Over Panel Door profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be of approved shade Powder

coated, the Profile Manufacturer to supply all the necessary

clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 50

Micron of approved shade Powder coating. Provision to be

made for ACCESS CONTROL.

NOTE: APPROVAL to be taken from theEngineer in charge of

work BY SUBMIITTING Shop Drawings along with calculation

sheet before starting of execution work.

ID 07 - 2000 x 2400 - WORK STATION AREA &

CONFERENCE ROOM

NS SECOND FLOOR Nos 2.00 107352.86 214705.72

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL - DOUBLE

Digitally signed by DEEPAK

SAPL - P. No. 29 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Supply & Fixing of Aluminium Glazed Door (Double Leaf) with

Glass infill of 13.52mm thk Toughened Aqualite Textured

glass with DORMA Alexa System-100/70 frames Stiles all

around the door. Aluminium Stile to be formed out of

100x45mm or 70mmx45mm of Alexa STP100 Door Profile

frame with clips & seals , service panel profile for access reader

portal 100X70mm with rebate clip DORMA Top Hung Patch

Fitting (2Nos), Heavy Duty Floor springs (to withstand

wind load of 150 kgs/ cum) & Pure 8100 Lever Handle 952

Narrow stile Lock package/TG 9356 Pull Handle 917 Narrow stile

Dead Lock package and DORMA TS 96 EN4 Cam Action

concealed Door closer (as per EN 1154) with Hold Open unit

necessary seals to be provided all around the door frames. For

doors part of single/double glazed partiton DP100-SG/DG Door

rebate profile to be used.In case of Glass overall panel Alexa

OHPDP100-SD/DG Over Panel Door profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be of approved shade Powder

coated, the Profile Manufacturer to supply all the necessary

clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 50

Micron of approved shade Powder coating. Provision to be

made for ACCESS CONTROL.

NOTE: APPROVAL to be taken from the Engineer in charge of

work BY SUBMIITTING Shop Drawings along with calculation

sheet before starting of execution work.

NS SECOND FLOOR Nos 1.00 231967.94 231967.94

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL.

Supply & Fixing of Aluminium Glazed Door (Double Leaf) with

Glass infill of 13.52mm thk RIPPLE Frosted glass with

DORMA Alexa System-100/70 frames Stiles all around the door.

Aluminium Stile to be formed out of 100x45mm or

70mmx45mm of Alexa STP100 Door Profile frame with clips &

seals , service panel profile for access reader portal 100X70mm

with rebate clip DORMA Flush Hinges (8 Nos) & Pure 8100 Lever

Handle 952 Narrow stile Lock package/TG 9356 Pull Handle (4

Nos.) 917 Narrow stile Dead Lock package and DORMA TS 96

EN4 Cam Action concealed Door closer (as per EN 1154) with

Hold Open unit necessary seals to be provided all around the

door frames. For doors part of single/double glazed partiton

DP100-SG/DG Door rebate profile to be used.In case of Glass

overall panel Alexa OHPDP100-SD/DG Over Panel Door profile

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be matt natural anodized, the Profile

Manufacturer to supply all the necessary clips, seals and fixing

accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 20

Micron of Anodizing. Provision to be made for ACCESS

NOTE: APPROVAL to be taken from the Engineer in charge of

work BY SUBMIITTING Shop Drawings along with calculation

sheet before starting of execution work.

ID 06 - 1500 x 2400 -Staff Breakout Area & Operations

NS SECOND FLOOR Nos 1.00 215327.58 215327.58

SINGLE GLAZED RIPPLE FROSTED GLASS PARTITIONS -

WITH ALEXA SYSTEM-45 FRAME PROFILES.

Supply and Fixing of RIPPLE FROSTED Glass partition of

13.52mm Thk. using DORMA Alexa System-45 Frames to a

height of maximum 3m or as per drawing.The Fixed glass to be

fixed using DORMA Alexa BP45 Profiles at Top & Bottom & Alexa

SP45 at sides. The profile size to be 45x25MM to be fixed on to

the floor/wall/ ceiling as per the architect design. DORMA Alexa

H Junction profile to be used at all Glass to Glass vertical joints,

90 Deg L Junction Profiles and T Junction profiles necessary as

per design.In case of Glass overall panel Alexa MP45 & BP45

Overpanel Profile to be used.In case of Open glass edges EP45

End Profile to be used. The Alexa profiles shall be suitable for

Glass thickness of 13.52mm.The Profile shall be matt 50

micron powder coating, the Profile Manufacturer to supply all

the necessary clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 50

Micron of Powder coating.

PARTITION - CONFERENCE ROOM 18 PAX

NS SECOND FLOOR Sqm 42.00 17783.78 746918.76

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL.

Digitally signed by DEEPAK

SAPL - P. No. 30 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

Supply & Fixing of Aluminium Glazed Door (Single Leaf) with

Glass infill of 13.52mm thk TINTED TOUGHENED BULLET

PROOF GLASS with DORMA Alexa System-100/70 frames

Stiles all around the door. Aluminium Stile to be formed out of

100x45mm or 70mmx45mm of Alexa STP100 Door Profile

frame with clips & seals , service panel profile for access reader

portal 100X70mm with rebate clip DORMA Flush Hinges (4Nos)

& Pure 8100 Lever Handle 952 Narrow stile Lock package/TG

9356 Pull Handle 917 Narrow stile Dead Lock package and

DORMA TS 96 EN4 Cam Action concealed Door closer (as per EN

1154) with Hold Open unit necessary seals to be provided all

around the door frames. For doors part of single/double glazed

partiton DP100-SG/DG Door rebate profile to be used.In case of

Glass overall panel Alexa OHPDP100-SD/DG Over Panel Door

profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be matt natural anodized, the Profile

Manufacturer to supply all the necessary clips, seals and fixing

accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 20

Micron of Anodizing. Provision to be made for ACCESS

NOTE: APPROVAL to be taken from the Engineer in charge of

work BY SUBMIITTING Shop Drawings along with calculation

sheet before starting of execution work.

ID 04 - 1200 x 2400 - WAITING AREA

NS FIFTH FLOOR Nos 1.00 53100.00 53100.00

ALUMINIUM GLAZED DOOR WITH ALEXA SYSTEM-100/70

FRAME PROFILES WITH SERVICE PANEL - SWING DOOR

Supply & Fixing of Aluminium Glazed Door (Single Leaf) with

Glass infill of 13.52mm thk TINTED GLASS with DORMA

Alexa System-100/70 frames Stiles all around the door.

Aluminium Stile to be formed out of 100x45mm or

70mmx45mm of Alexa STP100 Door Profile frame with clips &

seals , service panel profile for access reader portal 100X70mm

with rebate clip DORMA Top Hung Patch Fitting (1Nos),

Heavy Duty Floor spring (to withstand wind load of 150

kgs/ cum) & Pure 8100 Lever Handle 952 Narrow stile Lock

package/TG 9356 Pull Handle 917 Narrow stile Dead Lock

package and DORMA TS 96 EN4 Cam Action concealed Door

closer (as per EN 1154) with Hold Open unit necessary seals to

be provided all around the door frames. For doors part of

single/double glazed partiton DP100-SG/DG Door rebate profile

to be used.In case of Glass overall panel Alexa OHPDP100-

SD/DG Over Panel Door profile to be used.

The Alexa profiles shall be suitable for Glass thickness of

13.52mm.The Profile shall be of approved shade Powder

coated, the Profile Manufacturer to supply all the necessary

clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 50

Micron of approved shade Powder coating. Provision to be

made for ACCESS CONTROL.

NOTE: APPROVAL to be taken from the Engineer in charge of

work BY SUBMIITTING Shop Drawings along with calculation

sheet before starting of execution work.

ID 06 - 1050 x 2400 - PANTRY AREA (HANDICAP

COMPLIANT ACCESS)

NS THIRD FLOOR Nos 1.00 190872.08 190872.08

Providing fabricating and fixing Single leaf WATER PROOF flush

shutter door made out of 35mm thick flush door shutter

finished with 1.0mm thick approved laminate on both sides as

indicated in detailed drawing. All Shutter edges finished with

2mm thick PVC Edge binding.

Door frame : Seasoned BEACH WOOD door frame of 45mm x

100mm section of approved profile. The surface in contact with

the partition / wall shall be painted or treated with antitermite

paint of approved make before erection and all exposed

surfaces shall be finished with Polyurethane paint. The door

shall have teakwood architrive all around the frame

45mmx12mm & edge banding around.complete as per

drawings.The frame and achitrive to be finished with

Polyurethane paint of approved shade & brand.

Vision Panel in Doors - The shutter shall be provided without

vision panel as mentioned in the detail drawing

Door Hardware : Rate should include supply and installation of

door and hardware at all levels with screws set as mentioned in

the door and hardware schedule as below. All the fixtures are

Brush Steel finish. The cost includes brass inlay design in

shutters as per drawings.

DT 04A - 900 x 2400 - FLUSH DOOR - SINGLE SHUTTER

For POWDER Room

The Hardware set for the Door are mentioned below :

Digitally signed by DEEPAK

SAPL - P. No. 31 KUMAR MEHRA

DSR Item/NS Item Description Unit Quantity AMOUNT

1. 450mm H - Handle in pair , 25.4mm Dia , Product shade -

2. Stainless Steel 2 Ball Bearing Hinge 5 x 3 x 3mm, Product

shade -HG1154SS - 4 Nos

3. Door Closure Max upto 80Kg, Product shade - DC80PDC -

4. 24" Tower Bolt, Product shade - TS2410SS - 1 No

NS THIRD FLOOR Nos. 1.00 57807.02 57807.02

Providing fabricating and fixing Single Leaf SLIDING door made

out of 35mm thick door shutter finished with 1.0mm thick

approved laminate on both sides as indicated in detailed

drawing. All Shutter edges finished with 2mm thick PVC Edge

Door frame : Seasoned BEACH WOOD door frame of 45mm x

100mm section of approved profile. The surface in contact with

the partition / wall shall be painted or treated with antitermite

paint of approved make before erection and all exposed

surfaces shall be finished with Polyurethane paint. The door

shall have teakwood architrive all around the frame

45mmx12mm & edge banding around.complete as per

drawings.The frame and achitrive to be finished with

Polyurethane paint of approved shade & brand.

Vision Panel in Doors - The shutter shall be provided without

vision panel as per detail drawing

Sliding Channels : Sliding channel has to be provided on top

to operate both sides.

Door Hardware : Rate should include supply and installation of

door and hardware at all levels with screws set as mentioned in

the door and hardware schedule as below. All the fixtures are

Brush Steel finish.

DT 01A - 1100 x 2400 - FLUSH DOOR - SINGLE SHUTTER

For REST ROOM / SICK ROOM, etc.,

The Hardware set for the Door are mentioned below :

1. 450mm H - Handle in pair , 25.4mm Dia , Product shade -

SH18PSS - 1 No (Flush Handle)

2. Mortise Dead Lock , Product shade - ML102SS - 1 No

3. Euro profile Cylinder both side key 60mm, Product shade -

4. Stainless Steel Sliding door channel - 1 No. on top

5. 24" Tower Bolt, Product shade - TS2410SS - 1 No

NS SECOND FLOOR Nos. 1.00 67448.80 67448.80

Providing fabricating and fixing DOUBLE Leaf SLIDING door

made out of 35mm thick door shutter finished with 1.0mm thick

approved laminate on both sides as indicated in detailed

drawing. All Shutter edges finished with 2mm thick PVC Edge

Door frame : Seasoned BEACH WOOD door frame of 45mm x

100mm section of approved profile. The surface in contact with

the partition / wall shall be painted or treated with antitermite

paint of approved make before erection and all exposed

surfaces shall be finished with Polyurethane paint. The door

shall have teakwood architrive all around the frame

45mmx12mm & edge banding around.complete as per

drawings.The frame and achitrive to be finished with

Polyurethane paint of approved shade & brand.

Vision Panel in Doors - The shutter shall be provided without

vision panel as per detail drawing

Sliding Channels : Sliding channel has to be provided on top

to operate Two shutter on both sides.