Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.9 L
EMD Value
₹29,000
Closing Date
25 Nov 2026, 12:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE CD-1, PWD Kannauj
EE CD-1, PWD Kannauj
As per boq
2026_CEKNP_1209163_6
1535/9A Date 14.10.2026
Open Tender
Civil Works
Percentage
60 days
Kannauj
Please refer Tender documents.
2 documents required · 2 mandatory
₹768
₹29,000
Yes
EE CD-1, PWD Kannauj
18 Nov 2026
18 Nov 2026
25 Nov 2026
18 Nov 2026
25 Nov 2026
18 Nov 2026
23 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. | 82.6 | Sqm | 25 | ₹2,065 |
| 2 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Gr II(Bitumen VG-30) | 4.12 | Cum. | 13,000 | ₹53,560 |
| 3 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects | 1.76 | Cum. | 15,000 | ₹26,400 |
| 4 | rking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface
Providing and laying of hot applied thermoplastic compound 2.5 mm thick,100 mm wide including reflectorising glass beads 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35-2015 The finished surface to be level, uniform and free from streaks and holes. MoRTH-803 (8.13) | 41.3 | Sqm | 600 | ₹24,780 |
| 5 | (STOP Sign) 60 cm equilateral tringle with diffinitation plate (20cm X 60cm) :-
Retro-reflectorised Traffic sign as per IRC-67-2012
providing and foxing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminiurn sheeting 1.5 mm thick supported on a mild steel angle con post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 46 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shinkage, flexibility, äner removal, adhesion, impact resistance,-----------------------provisionally in such a situation, the Employer/Clent, if so desires could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering ng of of the the sheeting as per IRC 67.2012 Legends, letters numerals and borders etc should be as per MoRTH specification No-801.3.7 Proof of the same in form of goveminent report shall be uploaded while quoting tender. MoRTH-801 (8.4) | 10 | Nos | 3,300 | ₹33,000 |
| 6 | 155X60 cm Double chevron :-
Retro-reflectorised Traffic sign as per IRC-67-2012
providing and foxing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminiurn sheeting 1.5 mm thick supported on a mild steel angle con post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 46 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shinkage, flexibility, äner removal, adhesion, impact resistance,-----------------------provisionally in such a situation, the Employer/Clent, if so desires could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering ng of of the the sheeting as per IRC 67.2012 Legends, letters numerals and borders etc should be as per MoRTH specification No-801.3.7 Proof of the same in form of goveminent report shall be uploaded while quoting tender. MoRTH-801 (8.4) | 6 | Nos | 5,600 | ₹33,600 |
| 7 | 30X90 cm (Left/Right) Object Hazard :-
Retro-reflectorised Traffic sign as per IRC-67-2012
providing and foxing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminiurn sheeting 1.5 mm thick supported on a mild steel angle con post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 46 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shinkage, flexibility, äner removal, adhesion, impact resistance,-----------------------provisionally in such a situation, the Employer/Clent, if so desires could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering ng of of the the sheeting as per IRC 67.2012 Legends, letters numerals and borders etc should be as per MoRTH specification No-801.3.7 Proof of the same in form of goveminent report shall be uploaded while quoting tender. MoRTH-801 (8.4) | 4 | Nos | 3,300 | ₹13,200 |
| 8 | Speed Limit Signs Board 90 cm equilateral tringle with diffinitation plate size (20cm X 60cm) :-
Retro-reflectorised Traffic sign as per IRC-67-2012
providing and foxing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminiurn sheeting 1.5 mm thick supported on a mild steel angle con post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 46 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shinkage, flexibility, äner removal, adhesion, impact resistance,-----------------------provisionally in such a situation, the Employer/Clent, if so desires could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering ng of of the the sheeting as per IRC 67.2012 Legends, letters numerals and borders etc should be as per MoRTH specification No-801.3.7 Proof of the same in form of goveminent report shall be uploaded while quoting tender. MoRTH-801 (8.4) | 5 | Nos | 4,000 | ₹20,000 |
| 9 | Sign Board (90cm equilateral tringle with definition plate) speed table :-
Retro-reflectorised Traffic sign as per IRC-67-2012
providing and foxing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminiurn sheeting 1.5 mm thick supported on a mild steel angle con post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm x 46 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shinkage, flexibility, äner removal, adhesion, impact resistance,-----------------------provisionally in such a situation, the Employer/Clent, if so desires could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering ng of of the the sheeting as per IRC 67.2012 Legends, letters numerals and borders etc should be as per MoRTH specification No-801.3.7 Proof of the same in form of goveminent report shall be uploaded while quoting tender. MoRTH-801 (8.4) | 4 | Nos | 3,300 | ₹13,200 |
| 10 | Edge line / center line :-
MORTH 304 Reflective Raised Pavement Markers (Cat Eye/ Road Stud)
supply and fixing of raised pavement marker with Made of Plastic body of RPSW Road Stud shall be Butadien Styrene (ABS) of Any other sutatie material approved by the Engineer. The Marker shat support a load of 13.535 kg tested in accordance with ASTM D4280 The Reflective panels shall consist of number enses containing single or dual prismatic cubes capable of providing total internal reflection of the light enting the lens face Lenses shall be mouled of methyl methecrylate conforming to ASTM D788 of equivalent. The siop or retro-reflecting surface shall preferably be 35-1-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq cm the marker height shall not be less than ----------------d performance of the finished road marker shall also be given by contractor who carries out the work of foong of reflective road markers. In case displaced damaged get wom out or lose their refectivity compared to stipulated standards the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate, shall include all materials, labour. T&P, transportation, installation and incidentats all complete as per drection of the Engineer-in-Charge. markers are. MoRTH-8.04 (8.35)- Suggestive
RPM (without shank) . | 277 | Nos | 190 | ₹52,630 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
T1compressed.pdf
Tender Documents • 0.34 MB
BOQ_2296014.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .