TENDER FOR CIVIL/ INTERIOR/ ELECTRICAL/HVAC WORK FOR OFFICE OF THE STATE TEX, JAMKHAMBHALIYA.

Dismantling and removing old tiles - Removal of all types of Flooring , such as vitrified tile, marble, granite,kotah stone etc. including the PCC bedding on the floor upto RCC slab level using manual / mechanical means as instructed including all types of bedding and brickbat coba in toilets sunken portions. No extra payment towards removal of brickbat coba/double tile flooring etc. over and above the flooring measurement shall be paid. Only the plan area would be measured for payment (all measurements for a particular area would be measured only once).

Scrapping out old plaster - Removing all types of plaster of any thickness for wall/ ceiling surface etc. complete.

(i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement: 4 -coarse sand) in super structure (B) Conventional upto floor two level. (Ground floor)

Providing plaster in work - Providing and applying internal plaster - average 12 mm thick in Cement Mortar 1:4 (1 cement : 4 fine sand) without neeru finish in all positions, levels and heights including finishing, scaffolding, curing, etc., complete as per directions of the EIC/ Architect.

P AND L 24" x 24" vitrified 8 mm thick tile flooring over 20mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing AND cleaning the surface etc. complete for antiskit / matt finish. Providing 3 to 5 mm grooves for between the tiles and filling with epoxy material as per enginer in charge.

Providing and fixing skirting - Providing and laying Vitrified tiles (thickness to be specified by manufacturer), conforming to I.S. 15622, of approved make, in all colours AND shade, in walls, skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry 3.3 kg/ sqm including grouting the joint with white cement AND matching pigments etc. complete.

Providing colour work - Providing and applying Plastic emulsion paint of approved colour on wall, ceiling surfaces with Birla Wall putty to obtain level and smooth surface followed by a coat of primer as per manufacturer’s specification and finally painting with two or more coats of plastic emulsion paint to give an even shade. The first coat shall be brush applied and the final coat shall be roller finish. The rate shall include surface preparation, Birla Wall putty and scaffolding etc. complete as per the directions of the EIC/Architect.

Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S. standards.

Providing and laying (PCC) cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick.

Providing and Laying brick bats with mortar using broken bricks/brick bats 25 mm to 75 mm size with 50PERCENTAGE of Cement Mortar 1:5 ( 1 cement:5 coarse sand) in two layer with well compacting and curring and treating similarly the adjoining walls upto 450 mm height including rounding of junctions of walls and slabs.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement 0.488 kg/sqm mixed with water proofing cement compound 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement 0.242 kg/sqm mixed with water proofing cement compound 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry with all height.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat of red lead paint.

Providing and fixing table with drawer box to be made with 19mm,6mm and 12mm thick BWP marine ply with 1mm thick Laminate Open edges of plywood to be finished with 2mm thick pvc edge beading Balancing laminate at inner side. Drawers to be slid on approved make telescopic chanel it should be complete with approved make lock SS handle and all necessary fittings and hardware.Complete as per drg and design. Complete with CPU stand ,key board trey and wire manager.Executive table with drawer box1800X750x750mm ht. 450x600x 700mm ht. drawer box.

Providing and fixing table without drawer box. Entire table (Table top,modesty panel and side vertical panel) to be made with 19mm,6mm thick BWP grade marine ply (IS CODE -710) with 1mm thick laminate on exterior surface and Balancing laminate at hidden side.(BELOW TABLE TOP) it should be complete with all necessary fittings and hardware. Complete with CPU stand ,key board trey and wire manager.Complete as per drg and design. TABLE-1500X750 x 750mm ht. w/o drawer box

Providing and fixing table along with wall withd rawer box. Entire table (Table top,modesty panel and side vertical panel) to be made with 19mm,6mm thick BWP grade marine ply (IS CODE -710) with 1mm thick laminate on exterior surface and Balancing laminate at hidden side.(BELOW TABLE TOP) it should be complete with all necessary fittings and hardware (lock,telescopic channel handle etc). Complete with CPU stand ,key board trey and wire manager.Complete as per drg and design. TABLE-1350X600 x 750mm ht. with drawer box.-450x450,x700mm ht.

Providing and fixing table without drawer box. Entire table (Table top,modesty panel and side vertical panel) to be made with 19mm,6mm thick BWP grade marine ply (IS CODE -710) with 1mm thick laminate on exterior surface and Balancing laminate at hidden side.(BELOW TABLE TOP) it should be complete with all necessary fittings and hardware. Complete with CPU stand ,key board trey and wire manager.Complete as per drg and design.STAFF TABLE-1350X600x750mm ht. w/o drawer box

Providing and fixing of storage units with partly drawer and partly shutter. as per drawings and as per the site requirements. Unit to be made of 19 mm thick BWP grade marine ply (IS CODE -710) with 1.0mm thick laminate on exteral side. Balancing laminate at hidden side. for top, bottom, sides and 9 mm thick plywood for back. Shelves to be made of 19 mm thick BWP grade marine ply (IS CODE -710) plywood. All exposed surfaces of plywood are to be finished with 2mm thick PVC beading or teak wood beading with melamine polished.. All internal surfaces and external back surface to be finished with .5 mm thick balancing laminate including shelves. Shutters to be made of 19mm thick BWP grade marine ply (IS CODE -710) plywood finished Item includes all types of hardwares of approved make such as drawer telescopic chanel, cupboard locks, S.S. handles, tower bolts, S.S. hinges, S.S. buttons, complete as per the directions of the EIC/ Architect. Rates includes hardwares SIDE CABINET-900mm L.x.750mm ht. x450mm d.

Providing and fixing of back side storage units with all hardware and fittings.Entire unit to be made of 19 mm thick BWP grade marine ply (IS CODE -710) with 1mm thick laminate on exterior surface and Balancing laminate at hidden side. for top, bottom, sides and 9 mm thick plywood for back. Shelves to be made of 19 mm thick BWP grade marine ply (IS CODE -710) plywood. All exposed surfaces of plywood are to be finished with 2 mm thick PVC beading. All internal surfaces and external back surface to be finished with .5 mm thick balancing laminate including shelves. Shutters to be made of 19mm thick BWP grade marine ply (IS CODE -710) plywood finished with 1 mm thick approved laminate Item includes all types of hardwares of approved make such as drawer telescopic chanel, cupboard locks, S.S. handles, tower bolts, S.S. hinges, S.S. buttons, complete as per the directions of the EIC/ Architect. Rates includes hardwares

Providing and supplying medium back chair with Adjustable Seat Height, Armrest, Wheels, Locking Mechanism, , Recline, Seat Lock,Frame Material: nylone. Upholstery Type: Cushion (A.C. CHAMBER)

Providing and supply low back chair with Seat and back in single piece with integrated arms like bucket shape, nylon moulded of 450 to 500 density fix inner and outer snap fit arrangement in back with mesh fabric inside on equal interval of rectangular slots design. The mechanism of the chair have have following features : 360竅ｰ revolving type, 2.5mm thk CRCA powder coated center tilt Mechanism, Tilt tension adjustment, locking in single position, Plastic component inside the mechanism of Grade - MI 3530 and Epoxy Powder coated 70 Microns with tested 1.2 lacs cycles as per BIFMA Standard The chair have be provided with pneumatic height adjustment which have have stroke of 100 +/- 5 mm. The Base have be made of injection moulded nylon. It have be fitted with 5 nos. twin wheel castor - 50 mm diameter. The size of the base be 660 +/- 1 mm pitch-centre-diameter. The twin wheel castors have be made of Nylon injection moulded in black colour. Overall dimensions of Chair have be, Width of Chair - 570 mm, Depth of chair 570 mm as measured from base below. Height of back from ground - min 930 to max 1030 mm. Seat height -min 455 mm to max 555 mm. Dimensions tolerance / variations have be within +/- 10 mm.(Staff)

Fixed chair (all visitor's )

Providing AND Fixing wall paneling made from 37x25 mm aluminium frame at approx. 600mm x 600mm c/c distance clad with 12mm thick ply BWP grade marine ply (IS CODE -710) with 1mm thick laminate with grooves as per drg.

Providing and fixing full height 70 to 75mm thick double skin partition with partly 8mm thick glass. It should be made from 50mmx37mmx1.2mm thik aluminium frame (C/C 600x600MM)covered with both side 8mm thick bwp marine ply (IS COSE 710) with both side 1.0mm thick laminate with groove. without any air gap. Aluminium framing to be erected above false ceiling up to rcc slab. .No extra cost to be paid for the same.Open edges to be finished with ply with laminate, Before installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from partition Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge. Entire work to be completed as per the instructions of EIC / Architects.

LOW HT. PARTITION-Modular :Providing and fixing low height (1350 mm ht.) double skin solid partition. It should be made from 50mmx37mm aluminium frame (C/C 600x600MM)covered with both side partly 8mm thick BWP marin ply with 1.0mm thick laminate up to 900mm ht.,partly 5mm th. thick glass,partly 12mm thick soft board with fabric,or partly ply with laminate to be provided above 900mm ht.. and grooving as per design. open edges to be finished with powder coated alluminium frame.Before installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from partition Including all materials and labour etc. complete as per detail drawing and as per the instructions of EIC / Architects.Length x ht. to be meassured for mode of messurment.

Providing and fixing Translucent Roller Blind fixed on window level on wooden batten and curtain lift with cotton thin rope, design and colour as per instruction by engineer – in – Charge with necessary hardware fitting, material and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant. Approved make Vista / Neon

Providing and fixing Gypsum board 12.50 mm thick false ceiling in steps and design using Original Indian Gypsum board with original GI sheet section of Gypsteel (Gypsteel shall be used) supporting system in line and level. Finishing the surface and applying 3 coats of Plastic emulsion paint as directed complete. Entire work to be done as per standard specifications of Saint Gobin Gyproc India..

Providing AND fixing of Ecotone Soft Fiber Acoustical Suspended Ceiling System with Beveled Tegular Edge tiles with Ecotone Silhouette 15mm thick Black Treveal GRID system. The tiles should have NRC 0.9, Light Reflectance >85PERCENTAGE, Thermal Conductivity k EQAUL TO 0.052 - 0.057 w/m K, Color White/Black , Fire Performance UK Class 0/Class1 (BS 476 Part 6 AND 7) in module size of 600 x 600 x 20 mm, suitable for Green Building application, with Recycled content of 31PERCENTAGE. The tiles shall be laid on Ecotone Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in black/white color and with a web height of 38mm and a load carrying capacity of minimum 15.68 Kgs/M2 AND minimum pull out strength of 100 Kgs. Silhouette, Main RunnersAND cross Tees to have mitred ends AND "birds’ mouth" notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 AND need to be installed with Suspension system of Ecotone make. The Tile AND Grid Perimeter trim to be Ecotone wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centers Suspension System accessories manufactured and supplied by Ecotone consisting of M6 Anchor Fasteners with Vertical hangers made of Galvanized steel of size 26 x 26 x 25 x 1.2mm with a Galvanized thickness of 80 gsm. A pre-Straightened Hanger wire of dia. - 2.5 mm of 1.8 m length, thickness of 80 gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.68 mm with a minimum pull strength of 110 Kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner. Entire work shall be carried out as per the detailed technical specification, drawings and as per the instruction of Engineer-in-charge.Make:-( ecorox/avorox/ecotone by Preksha/Metafino)

Dismantaling and Removing existing false ceiling with all electrical fittings and fixtures,switch board from wall ,partition with door including stacking the materials with all lead and lift.

Repaint existing entire door,vent, door frame with scraping old paint,rate should be included replace broken glass above door.(vent).provide new hardware such as handles,lock,hinges etc.rate should be included both side of each door and edges.Total no. of door is 8 No.(1.2 x2.7 mt approx.)

Repaint existing entire window,vent, frame with scraping old paint,rate should be included replace broken glass..(if any)provide new hardware such as handles,lock,hinges etc.rate should be included both side of each window and edges. And removing and refixed with plaster.

Providing AND fixing S. S. perforated dust bin size 350mm x 250mm etc. complete.as directed by EIC/Architect.

Providing and fixing of full ht. storage units with all hardware and fittings.Entire unit to be made of 19 mm thick BWP grade marine ply (IS CODE -710) with 1mm thick laminate on exterior surface and Balancing laminate at hidden side. for top, bottom, sides and 9 mm thick plywood for back. Shelves to be made of 19 mm thick BWP grade marine ply (IS CODE -710) plywood. All exposed surfaces of plywood are to be finished with 2 mm thick PVC beading. All internal surfaces and external back surface to be finished with .5 mm thick balancing laminate including shelves. Shutters to be made of 19mm thick BWP grade marine ply (IS CODE -710) plywood finished with 1 mm thick approved laminate Item includes all types of hardwares of approved make such as drawer telescopic chanel, cupboard locks, S.S. handles, tower bolts, S.S. hinges, S.S. buttons, complete as per the directions of the EIC/ Architect. Rates includes hardwares

Over head cabinet-350mm depth :Providing AND fixing in position Over Head storage units of 350mm depth. Sides, top,back, bottom, shelves and shutters are to be made of 19 mm thk BWP marine plywood. All exposed surfaces except the top most surface are to be finished with 1mm thick approved laminate and all internal surfaces of the storage are to be finished with balancing laminate as detailed in drawing.All exposed surfaces of plywood are to be finished with 2 mm thick approved pvc edge beading .. Shelves are to be suitably supported on SS clips. The entire item is to be completed in totality with necessary hinges, ball catchers, , hardware, consumables all etc. complete as per the directions of the EIC/Architect. Length x ht to be measured for mode of measurment

Providing and fixing 40mm thick solid door with 5mm thick glass slit as shown in the drg. Door shall consist of approved make pre-fitted necessary hardwares of Enox / Ozone make for smooth swinging action. Rate shall include necessary approved locking systems, S.S. brush finished Handle pair, door closer (Heavy duty or equivalent), AND miscellaneous hardware items. Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant.

Providing and fixing 1.2 thick S.S. 304 2b grade sheet with nitric acid.Process etching plate and all text ANDgraphics fill-up by standard enemel black colored. Fitted with flats SS etching plat should be mounted on wall / wooden surface by SS screws and/or by 3m double side gum-tape,and where applicable as per company's guideline,with prior approval by Architect or on-site-authorised person.

Supply installation testing and Commisioning of 8Way TPN - DD Type DB I/C-40A/63A FP ELCB 30MA o/C:- 40A DP MCB -3nos, 10/16/20/25A SP MCB -18nos

WITH MODULAR TYPE SWITCHES Wiring of points to be done in concealed / Open manner (As per drawings AND Architect suggestion) in 25 mm dia medium gauge Rigid PVC FRLS pipe. Wiring shall be done with FRLS type copper flexible wire of 650V/1100V. Separate pipe should be taken for circuit mains. Nos of circuit of the same phases may be taken in same conduit (Max. 2 Ckts). The circuit shall be laid in 25/40 mm dia medium gauge rigid PVC FRLS pipe. The point rate shall include all the necessary piping and wiring from Distribution board to switch board AND Switch board to the batten holder / angle holder / Connector / Ceiling rose all inclusive Except Sub panel / Dist board. Supply installation testing and Commisioning of Two Way Light point controll with 2nos of Two Way Switch switch.

Supply installation testing and Commisioning of Primary Light point controll with 1nos of 5A switch.

Supply installation testing and Commisioning of Secondary Light point controll from above point.

Supply installation testing and Commisioning of FAN point controll l by 1nos of 5A switch and 2M Fan Regulator

Item Description

Supply installation testing and Commisioning of Exhust Fan point controll with 5A sswitch and connector at exhaust fan side

Supply installation testing and Commisioning of 15A Plug Point Controll by 15A Switch

Supply installation testing and Commisioning of Ac point controll by 15A Switch indicating Switch

Supply installation testing and Commisioning of 5A Plug Point Controll by 5A Switch

The wiring shall be done as per relevant prevailing standard. The looping of the wiring should be done in the switch boxes or light and fan point outlet boxes to avoid the junction boxes. The junction boxes and switch boxes for the ceiling light point, fan point etc shall be minimum 60mm deep. All the necessary jarry in brick plastered walls should be done with machine cutter only, also jarry should be filled with cement, sand and wire/Chicken mesh as required, the material cost for rough finish shall be included in point rate. Wiring should be done as per distribution details. Each circuit should have dedicated phase, neutral AND earth wire. Mains will be cosider running meter Supply and Labour charges for laying of 1.5sqmm (p+N), 1.5sqmm ( E) wire in PVC conduit

Supply and Labour charges for laying of 2.5sqmm (p+N), 1.5sqmm ( E) wire in PVC conduit

Supply and Labour charges for laying of 4.0sqmm (p+N), 2.5sqmm ( E) wire in PVC conduit

Supply and Labour charges for laying of 6.0sqmm (p+N), 4.0 sqmm ( E) wire in PVC conduit

Supply and Labour charges for laying of 4.0sqmm (3p+N), 2.5 sqmm ( E) wire in PVC conduit

Supply and Labour charges for laying of 6.0sqmm (3p+N), 4.0 sqmm ( E) wire in PVC conduit

Supply and labour charges for Fixing of AnchorFishnor with Appropriate size of Fan Rod

SITC charges for fixing ofLINEAR Hanging light

Supply, installation, testing and commissioning of ' 6”/9” dia. of 12 W LED Downlighter to be recessed in false ceiling with all necessary hardware, chains, hook etc., complete. (with minimum -03- Years warranty)

SITC charges for fixing of WALL POINT

Supply, installation, testing and commissioning of 300 mm Exhaust fan, fresh air ventilator type with louver complete AND 6 Amp. 3 pin TOP, double ball bearing etc. [Wooden mounting frame should be fixed in coordination with carpenter - furniture contractor] (with minimum -01- Years warranty)

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be approved by Engineer in charge](with minimum -01- Years warranty)

Supply, Installation and Testing of Data outlet with 2-port Faceplate, 1 no. of RJ-11 Jack (CAT-6) and modular GI box /PVC Surface box as per detail technical specifications and as per instruction of engineer in charge. - FOR TELEPHONE

Supply, Installation and Testing of Data outlet with 2-port Faceplate, 1 no. of RJ-45 Jack (CAT-6) and modular GI box /PVC Surface box as per detail technical specifications and as per instruction of engineer in charge. - FOR DATA

Supply, Installation, Testing and Connection of UTP, 4-pair, 23 AWG, LSZH rated CAT-6 , 1Gbps Data rate cable laid through conduits/Cable Tray etc. (Rates of conduits/Cable tray shall be quoted separately at elsewhere ) as per detail technical specifications

Supply, Installation and Testing of CAT-6 Patch cables (UTP) - 1 Mtr. Length with both side male RJ-45 Connectors and connections as per detail technical specifications and as per instruction of engineer in charge.

Supply, Installation and Testing of CAT-6 Patch cables (UTP) - 2 Mtr. Length with both side male RJ-45 Connectors and connections as per detail technical specifications and as per instruction of engineer in charge.

Sitc of fixing of 20pair telephone krone box

SITC of laying of 20pair jellyfield Armoured Telephone Cable

SITC of laying of 6pair optical fibre cable

Fire Detection, Alarm and Control System SITC of 2ZONE CONVETIONAL FIRE ALARM PANEL

SITC of Inteligent Convetional Smoke Detector detector with bicolour 360 deg LED indication, electronic addressing, multiple sensitivity levels, pre-alarm option, non-volatile memory having provision for seld diagnostics and history log, dust and dirt resistant with dirft compensation, plug in design, feild replacable photo chamber, with compatible mounting bases, Junction box and other accessories, as required and working on 19-24V DC supply, all complete as required.

SITC of Convetional Manual Call Point, integrally mounted addressable module, that monitors and reports the contact status. The device shall be EN 54 / LPCB Approved

SITC of Analogue Convetional Electronic Hooter cum Strobe of 88dba/90dba and 15,30,75 AND 110 cd,The device shall be EN 54 / LPCB Approved

Supply, Installation, Testing AND Commissioning of 2 Core X 1.5 Sq.mm FRLS PVC insulated armoured copper conductor cable with all Required Accessories as per technical specification etc. as required. For FAS AND PA System.

Supplying AND providing 1.5.00 TR Split A/C with high wall mounted unit. [Mini 3 Star rating as per BEE Guide Line 2019] Machine shall have copper condensor coil unit.

Supplying AND providing 2.00 TR Split A/C with high wall mounted unit. [Mini 3 Star rating as per BEE Guide Line 2019] Machine shall have copper condensor coil unit.

Supplying AND providing 1.0.00 TR Split A/C with high wall mounted unit. [Mini 3 Star rating as per BEE Guide Line 2019] Machine shall have copper condensor coil unit.

Installation charges for above 2.0TR/1.50TR TR Split A/C including 5.0 Rmt copper tubing and electrical wiring connection etc. complete.

Referigerant piping - insulated 0.80mm wall thicknees copper tube of Mandav/ Totalline make between indoor to out door unit beyong 5 Rmt dist. Of 1.50TR /2.00TR Hiwall split unit with 1.5 Sqmm 4 Core copper flexible cable of Finolex/R R Kable/Havells/CEI make. The copper piping shall be insulated with 9 mm thick Nitrite rubber insulated of 'O' Class of K Flax/Armaflex/ Superlon Make ( copper pipe concealed in inside wall)

25/32 mm Dia UPVC drain pipe with insulation of Dutron/Supreme/Astral make - schedule 40 pipe, white in colour, joint properly glued with UPVC adhesive for water outlet from indoor unit. (drain pipe concealled in inside wall)

Providing ,Fabricate and Fixing MS L Type Stand /M.S stand Plateform for keeping outdoor unit of Cassette /Split A/C. with M.S cage for locking of outdoor unit of Cassette/Split A/C. including painting