Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC 19 PAOTA C ROAD JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.3 L+₹2.2 L (12.7%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹19.7 L+₹2.5 L (14.6%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) No 02 Jodhpur
GE (AF) No 02 Jodhpur
BR WORKS IN EM INSTALATION UNDER AGE BR-I AT GE (AF) NO 02 JODHPUR
2023_MES_598731_1
8383/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) No 02 Jodhpur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) No 02 Jodhpur
₹40,000
Yes
23 Jul 2023
26 May 2023
28 Jun 2023
26 May 2023
26 Jun 2023
13 Jun 2023
2 Jun 2023 - 9 Jun 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site complete all as specified and directed.
S&F 35 mm thick factory made , second class hard wood palin framd paneelled shutter (two panel with lock rail and panel of 9 mm BWP commericasl ply or 12 mm veneered particle board with commercial veneering on both face .The size of rail and stile as per IS: 1003 (Part-1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing as directed by Engineer-in-Charge.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded as directed by Engineer-in-Charge.
S&F Steel ventilator with top hung shutter, in two part one part fixed glass and other part are openable including hinges, steel peg stay, all as specified and directed.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc for 105 X60 mm complete & fixing also as specified supplied and fixed and as directed by Engineer-in-Charge
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described priming coat with pink primer and applying two coats of synthetic enamel paint as directed by Engineer-in-Charge
M&L for preparing of new steel surface of any description not otherwise described over 10cms width or girth and applying 2 coats of synthetic enamel paint over one coat ofred oxide primer complete all as specified and as directed.
S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed as directed by Engineer-in-Charge.
S&F 300 mm long aluminium alloy anodized silding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or casr aluminium alloy complete all as specified and directed.
S&F for 100 mm long butt hinges, medium weight stainless steel complete all as specified and directed.
S&F aluminium handles, cast type, anodized, of size 150mm complete all as specified and directed.
S&F 300 mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete as directed by Engineer-in-Charge.
S&F floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor as directed by Engineer-in-Charge.
S&F in repairs aluminium handles, cast type, anodized, of size 150mm as directed by Engineer-in-Charge.
S&F in repairs 300 mm long aluminium alloy anodized silding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast aluminium alloy as directed by Engineer-in-Charge
S&F in repairs 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed as directed by Engineer-in-Charge.
S&F in repair 25 mm MS powder coated curtain rod with and including fancy type powder coated MS fixing brackets, stops rollers etc complete all as directed by Engr-in-charge
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed as directed by Engineer-in-Charge.
S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixedcomplete all as directed by Engr-in-charge.
M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones as directed by Engineer-in-Charge.
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as directed by Engr-in-charge.
S&F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.
S&F alluminium anodised frame for doors,windows,ventilator with one or more rebates including joining cleat for fixing etc complete all as spd and directed.
S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, ruber neopene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos is each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc complete all as specified and directed. Note :- Glass panes / other filling materials in panels shall be masured and paid separately.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.
S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and directed.
S&F 100mm, 4 levers, aluminium mortice lock vertical type complete all as specified and directed.
S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as directed by Engineer-in-Charge.(Minium weight 15 mm-450 gms)
S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup , screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions as directed by Engineer-in-Charge.(Minium weight 15 mm-400 gms)
S&F 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions as directed by Engineer-in-Charge.((Minium weight 15 mm-450 gms)
S & F 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe and fixed in repairs
S&F in repairs 20 mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes as directed by Engineer-in-Charge (Minium weight 15 mm-450 gms)
S&F in repairs PVC connection 15 mm size with nuts of length 450 mm as directed by Engineer-in-Charge.
S&F in repair CP grating 100 mm dia all as specified and as directed.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe PVC connection 15 mm size with nuts of length 450 mm.complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish and as directed by Engineer-in-Charge.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets all as directed by Engr-in-charge.
S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore plastic ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) as directed by Engineer-in-Charge
S&F in repair 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore plastic ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) as directed by Engineer-in-Charge.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed as directed by Engineer-in-Charge.
M&L for Rendering 15mm thick on fair faces of brick/concrete/stone work in CM 1:4 finished even and smooth without using exctra cement, in any possition complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of any type of work in CM 1:6 finished even and smooth without using exctra cement complete all as specified and directed.
M&L for 5mm thick rendering in CM(1:3) on ceiling/soffit/chajja etc stone/concrete surface in any possition, finish even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound ISI marked as directed by Engineer-in-Charge
M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified.
Preparation of newely plastered surfaces of wall and applying three coats white wash all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified.
Preparation of newely plastered surfaces of ceiling and applying three coats white wash all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated/painted surfaces and applying one coat (Finishing coat) of cement base paint, colour/pattern, all as specified and as directed by Engineer-in-Charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed. Note : The quoted rate shall be deemed to be included use of scaffoldings, trestles, ladders, cradles etc, necessary for execution of work and protective measures of any height all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash. Note:- Quoted rate shall be deemed to be included for work in buildings/structure(like Staircase, mumpty,OHT, Shed, Sump etc) of any height including necessary scaffolding all as specified and directed.
M&L for preparationof old surfaces (plastered or unplastered) of walls including removing/scrapping down existing surface where ever necessary and applying one coat (finish coat) of oil bound distemper (OBD) white or approved tinted including removing existing nails, if any and filling the disturbed /uneven surface, holes/voids with wall care putty/POP to achieve the smooth surface complete all as specified & directed.
Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.
Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.
Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site to store complete as directed by Engineer-in-Charge.
Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site to store complete all as specified.
M & L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.
All as per item No 65.00 here-in-before but 20mm bore pipe.
Cutting chases stone concrete blocks pinning in making good to facing where required and pointing in CM 1:3 to ends or edge of landing steps cills sunshades shelves lintels eytc and cutting chases for conealed water tuibing making good not exceeding 10 cm girth for stone walls as directed by Engineer-in-Charge
Dismantling of cast iron/PVC or reinforced concrete drain pipe, jointed in cemented mortar and taking out of trenches or in vertical position of internal dia 100 mm & less all as directed by the Engineer-in-charge.
S&F PVC (SWR) gully traps of size 125/110 mm,setting and jointing with solvent cement and complete and as directed by Engineer-in-Charge.
S&F in repair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors as directed by Engineer-in-Charge.
S&F in repair for PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors as directed by Engineer-in-Charge.
S&F in repair for PVC (SWR), junction single, (Single T) with door 110 mm dia equal or unequal as directed by Engineer-in-Charge
S&F in repair for PVC (SWR) door bends 110 mm dia as directed by Engineer-in-Charge
S&F in repair for PVC (SWR), 75mm dia of floor trap, with grating including jointing with solvent cement and complete and as directed by Engineer-in-Charge.
M&L for PCC block masonary with solid blocks exc 10 cm in width 1:3:6 Type C1 20 mm graded aggregate and setting in cement moratr 1:6 complete and as directed by Engineer-in-Charge.
Cutting holes in brick walls in cement mortar for insering holdfasts and making good dismantled portion in cment mortar 1:3 or cment conrete 1:2:4 type B-1 as required exc half brick but not exc one brick as directed by Engineer-in-Charge.
Wire brushing and cleaning top surfaces of tarrace or cement concrete including dismantling existing old roof treatment and junction of parapets as directed by Engineer-in-Charge
M&L 10 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately as directed by Engineer-in-Charge.
M&L APP modified membrane minimum weighting 3 Kg/Sqm and minimum 3mm thick with polyster non woven polyster reinforcement ( weight not less than 150 gms/sqm )shall be laid by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises as directed by Engineer-in-Charge
M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 as directed by Engineer-in-Charge
M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors and skirting etc. (square/rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 as directed by Engineer-in-Charge
M&L for glazed ceramic tiles, coloured, 450x300x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone or brick masonry surfaces as directed by Engineer-in-Charge.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors as directed by Engineer-in-Charge.
M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement all as specified and as directed by Engineer-in-Charge.
M&L for framed work as in door or gates of angle or other section with gusset plate rails braces etc complet drilled for fixing of steel sheeting or other covering . Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings 9 exclusive of steel sheeting or other covering running rails and guides ) and hanging also fastening and fixing complete grade Fe-290 (Gde E-165) as directed by Engineer-in-Charge
M&L for MS plain black sheet 0.80 mm in wall cladding steel gate and similar work cut to size holes punched includinground headed screws clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required complete all as required as directed by Engineer-in-Charge
Dismantling AC sheet (Corrugated/Semi-corrugated) in roof covering .
S&F 6 mm thick Asbestos cement corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers.
S&F 6mm thick Asbestos cement two pieces adjustable serrated ridge fixed with J or L hook or cranked bolt with wahsers.
Dismantling MS plain sheet of any description any position all as specified & directed.
S & F for MS pipes as in pillars and roof grid work , hand rails, half round or other stock section or core for wooden hand - rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps incl embeding in concrete and screweing etc wind ties for roof incl securing bolts, posts and struts in fencing incl cutting tops to shape , drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or riveting,welding etc, and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
S&F steel work as in trusses (framed work) incl. Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding dorrs; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed.
S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-A,etc complete all as spd and directed.
S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde-E-250) quality-A,etc complete all as spd and directed.
S & F 4 mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after fillingc complete all as spd and directed.
S&F colour coated galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering including all necessary accessories & fixing arrangements and drilling in existing structure all as per manufactures instructions complete all as specified and directed.
Dismantling posts or struts(wood, steel or RCC) any sectin including taking out embeded portion and making good disturbed portion all as specified and directed.
Excavation in post holes (or simlar holes) each n.exc 0.5 cum, in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.
M&L for PCC work as in (1:3:6) type C-2 using 40mm graded stone aggregate in foundation filling & mass concrete for Post/Pillars etc all as specified and directed.
Supply only chain link MS galvanised fencing, heavy zinc coated (Hot Dip) of 4mm nominal dia of wire and mesh of size 100mm x 100mm conforming to IS: 2721-2003 complete all as specified in clause 10.34 on page 214 & 215 of MES SSR - 2009, Part-I and as directed.
Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.
S&F MS flats iron fillets for securing chain link fencing including all necessary drilling holes,bolting or riveting etc and similar work conforming to grade Fe-410 or Fe-310 complete all as specified and directed.
S&F MS Screw bolts hot dip galvanized machine made with hexagonal or square heads at one end and screwed the other or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nut 5 to 10mm dia meter of neck exc 5cm but n exc 10cm longall as specified and directed.
S&F MS round bar 10mm dia and over cut to length bent to shapes requried including cranking bending etc conforming to IS grade Fe-410-W for tying wire mash/chain linked fencing complete all as specified and directed.
M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in sub base of floor all as specified and directed.
M&L for 25 mm thick cement concrete type B1, 1 :2 : 4 (using 20 mm graded stone aggregate) in floor finishing surface even and smooth with using extra cement complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20 -25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigmenst to match the shade of the slab including rubbing and polishing complete including 15 mm screed bed or bedding layer in cement mortar 1:6 as directed by Engineer-in-Charge
M&L for kota-stone slab 15 mm thick in riser of steps skirting dado skirting and risers to step set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick renedering in CM 1:4 on stone masonary surfaces as directed by Engineer-in-Charge
M&L chequered cement concrete tiles 25cm x 25cm x 25mm thick with grey cement and pigment, machine pressed, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in C:M 1:6 complete all as specified and directed
M&L 50 mm thick sand filling under floor or in foundation including watering and condolodation
M&L for providing and laying 60 mm thick factory made chamefered edge cement concret paver block of M-35 grade with approved colour design & pattern as in footpath parks lawns drive ways or lighttraffic parking etc of required strength thickness & size shape made by table vibratory method using PU mould laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand comapcting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern finishing and sweeping extra sand as directed by Engineer-in-Charge
M/S MAJISA CONSTRUCTIONS
JAMWAY MATA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .