Bid Documents of Constructing of Anganwadi at Various location in Lunawada Nagarpalika.

Name of work :Constructing Anganwadi In Sindhi Colony Area.At.Lunawada Nagarpalika.

Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out

1 and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(C) Hard Murrum

Providing and laying Cement Concrete 1:4:8 (1 Cement : 4 Coarse

sand : 8 hand Broken Stone aggregates 40 mm Nominal size) and

curing complete excluding cost of formwork in. (a) Foundation and

Providing and laying controlled cement concrete M.200 for curing

complete excluding cost of formwork and reinforcement for

reinforced concrete eork in.(A) Foundations, footings, Base of

columns and Mass concrete.

Providing and laying ordinary cement concrete M.200exposed work

with curing etc. complete including the cost of formwork but

4 excluding the cost of reinforcement for R.C.C. work in. (A) BEAMS

:(iii) Having cross-sectional area more than 0.08Sq.m and upto

Providing and laying ordinary cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but

5 excluding the cost of reinforcement for R.C.C. work in. (B) COLUMNS

: (ii) Having cross-sectional area more than 0.08Sq.m and upto

Providing and laying ordinary cement concrete M.200exposed work

with curing etc. complete including the cost of formwork but

6 excluding the cost of reinforcement for R.C.C. work in. (A) BEAMS

:(ii) Having cross-sectional area more than 0.08Sq.m and upto

Brick work using common brunt clay building bricks having

crushing strength not less than 35kg/Sq.Cm. in foundation and

plinth in cement mortar 1:6 (1 cement : 6 Fine sand) (B)

(i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4- coarse sand) in foundation and plinth,(B)

Providing and laying ordinary cement concrete 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregates 20mm nominal size ) and

9 finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C.Work

in.(iii) Slabs having more than 10 cm. and upto 13 cm. thickness

Filling in foundation and plinth with brick bats. Chhara in layers of

10 20cm. thickness including watering remming and consolidating etc.

Providing and laying cement concrete 1:2:4 (1-cement : 2-coarse

sand : 4-graded stone aggregates 20mm nominal size) For R.C.C.

11 Lintel including finishing smooth with, curing etc. complete

including the cost of formwork but excluding the cost of

Providing 20mm thick cement plaster in single coat on single or half

12 brick walls for interior plastering upto floor two level and finishing

even and smooth in. (ii) Cement Mortar 1:4 (1-cement:4-sand)

LUNAWADA NAGARPALIKA - LUNAWADA

Name of Tender : Bid Documents of Constructing of Anganwadi at Various loaction in Lunawada Nagarpalika.

SCHEDULE - "B1"

Name of work :Constructing Anganwadi In Sindhi Colony Area.At.Lunawada Nagarpalika.

Quantity Rate Per Amount

Providing 15mm thick cement plaster in single coat on fair side

13 brick/concrete walls for interior plastering upto floor level finished

even and smooth in : (ii) Cement Mortar 1:4 (1 Cement : 4 Sand)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

14 bending, binding and placing in position complete upto floor two

Providing and laying 24" x 24" Vitrified 8mm thick flooring over

20mm (average) base of cement mortar 1:6 (1-cement : 6 coarse

sand ) on new surface or fixing on existing flooring by adhesive

15 material including dismentalling of existing flooring and jointed

with colour cement slurry including finished with flush pointing &

cleaning the surface etc.complete. For Light shade.

Providing and laying polished kota stone slab 25mm thick in risers

of steps, Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 –coarse sand) and jointed with gray cement slury

including rubbing and polishing etc.complete.

Providing and fixing 35 mm thick shutters for doors, windows and

clerestory windows including Indian teak wood frames 10 cm x

17 cm. size including anodized alluminium fixtures and fastenings

including primer coat of approved quality and two coats of oil

painting etc. complete.(i) Fully Glazed

Providing and fixing extruded aluminium window having extruded

aluminium Colour Powder Coated section frame main outer size

127mm x 38.10mm x 1.35mm (of Jindal Section no:2443, @ Wt.

1384 Kg/mt), horizontal Four track member size 122.20mm x

31.75mm x 1.10mm (of Jindal Section no:8787, @ Wt1.205 Kg/mt),

vertical member of size 122.20mm x 31.75mm x 1.50mm (of Jindal

Section no:8935, @ Wt.1.398 Kg/mt) with sliding shutters of

18 horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section

no:8949, @ Wt.0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29mm (of Jindal Section no:8947, @ Wt.0.456

Kg/mt/Section 8948, @ Wt.0.457 Kg/mt) with 5 mm thick

transparent bronze colour aluminium fitting and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm (jindal Section :2434, @ Wt.

19 0.643kg per mt) with colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as details etc complete for

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed dolts and

nuts or by screws.(B) Ornamental Grill.

Distempering (Two coats) with oil bound distemper of approved

brand and manufacture and of required shade on wall surfaces to

give an even shade, over and including a priming coat with

21 distemper primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar dropping and

other foreign matter and also including preparing the surface even

and sand papered smooth.

Constructing a cooking platform 60 cm. width and 70 cm high

resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii)Fixing

black kadappa stone 30mm thick laid on precast R.C.C.(1:2:4) slab

with plastering on exposed faces of wall in C.M. (1:4) etc complete.

LUNAWADA NAGARPALIKA - LUNAWADA

Name of Tender : Bid Documents of Constructing of Anganwadi at Various loaction in Lunawada Nagarpalika.

SCHEDULE - "B1"

Name of work :Constructing Anganwadi In Sindhi Colony Area.At.Lunawada Nagarpalika.

Quantity Rate Per Amount

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm

& earthwire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in /flushed on wall/ceiling

complete with 6A Tissino Type ISI marked flush type switch / bell

push and accessories erected on Metal / PVC Box covered with

mm thick PC(Polycarbonet) /Acrylic sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

Point wiring for independent PLUG with following size mains

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in /flushed on wall/ceiling , complete

with ISI marked 3 / 5 Pin socket and tissino type switch erected

with earth continuity connection erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. [A] For 2-

1.5 sq. mm Cu. Mains

(a) with medium class Rigid PVC pipe and accessories 20.00 312.93 Pt

Providing and erecting Approved make Ceiling fan with double ball

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

25 complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing.[Make shall be

approved by Engineer in charge]

Providing following type of Modular Type Accessories mounted with

pvc / metallic box, single mounting base frame covered with

textured / metallic front plate , modules erected with necessary

connection. As desired by Engineer In charge.

(5) Electronic hum Free four or more steps EME Fan regulator.

Providing following type of Modular Type Accessories mounted with

pvc / metallic box, single mounting base frame covered with

textured / metallic front plate , modules erected with necessary

connection. As desired by Engineer In charge.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB

(16) 32 Amp. DP Main Switch Operating with Energy Key Tag.

Supplying & erecting approved make HFHC Electronic ballast having

28 operation voltage range 120V to 300V at 0.95 power factor for (a)

One No. 20/40 watt tube light.Cat.I

29 Halogen Pin type lamp 12V 20 W. Cat.II

Add 18% GST Charge Rs.

Add 3% Consultacy Charge Rs.

Add 1% QC Charge Rs.