Loading…
Loading…
Tender Value
₹56.6 L
EMD Value
₹1.1 L
Closing Date
19 Jun 2026, 5:30 am4d left
Construction of Kitchen and store Room for Community Center in Township at HAL Korwa.
25768
HAL/KWD/Civil/06 of 26-27
Limited
IMM
Accessories Complex - Avionics Divn - Korwa
₹0
₹1.1 L
26 May 2026
26 May 2026
26 May 2026
19 Jun 2026
Abstract Estimate
Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18
Time Required for
(a) Conclusion of contract- 03month
(b) Completion of works- 12 Months
Sl. No. Particulars Amount In Rs. Reference
1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.
a Civil Works #REF! [Annexure- D-1]
2 Add 5% towards contigencies #REF!
Grand Total #REF!
Say ` 14.07 Lakhs
Sr. Manager (Works ) ATA
(Satyendra K Maurya) (SK Chaudhury)
Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18
1 SCHEDULE - "A" (PART-A) #REF!
2 SCHEDULE - "A" (PART-B) #REF!
Contingency @ 5% #REF!
Grand total #REF!
SAY : 14.07 Lakhs
HINDUSTAN AERONAUTICS LIMITED
AVIONICS DIVISION, KORWA
POST OFFICE: HAL, TEH: AMETHI
DISTT: AMETHI (UP) - 22 74 12
HINDUSTAN AERONAUTICS LIMITED
AVIONICS DIVISION, KORWA
POST OFFICE: HAL, TEH: AMETHI
DISTT: AMETHI (UP) - 22 74 12
Name of Work:-Construction of Kitchen and store Room for Community Center in Township at HAL Korwa.
NIT No.- HAL/KWD/Civil/06 of 26-27
Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.
NAME OF AGENCY (To be filled in highlighted box ) :
Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% Amount excluding GST @18% in (Rs.)
Part-A -Civil items
1 Earthwork Excavation in foundation trenches, column footing drains, manholes, chambers or any description of similar types of excavation works in all soils except hard rock upto 1.50 mt. depth getting out, including dressing and levelling of trenches sides and also returning filling, dewatering if required etc., all complete as per drawing, specifications and direction of E.I.C. 62.00 Cum 220.77 13687.74
2 Supplying and applying Pre-construction Anti termite treatment conforming to IS 6313 (Part II) 1981 with amendment upto date with chloropyriphos EC 20 % of make RanBaxy, Dursban, HIL BAN,Bayers as per IS standard in foundation, refilling in trenches, plinth filling and under plinth protection of building including cost of chemical emulsion labour, T&P etc. and applying as per specification and as directed by EIC. (The work shall be carried out by an approved specialized firm and shall carry a GUARANTEE for satisfactory performance for a period of Ten years. The agency will be approved by the department for which details of experience, license etc. of the agency are to be subbmitted). Payment will be made on the basis of plinth area measurement at one time for all the functions to be carried out as below:
(a ) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor With Chlorpyriphos E.C. 20% with 1% concentration etc all complete as per specification and direction of EIC 115.00 Sqm 403.93 46451.95
( b) Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole With Chlorpyriphos E.C. 20% with 1% concentration etc all complete as per specification and direction of EIC 75.00 RM 74.90 5617.50
3 Supplying and filling earth brought from outside of HAL premises (mechanical transport upto a lead of 5km approx. ) including excavation, loading, unloading, transportation, depositing, filling in layers not exceeding 20 cm, compaction etc . where directed, T&P etc all complete as per specification and direction of EIC 20.00 Cum 594.13 11882.60
4(a) Dismantling of Brick Works of any description and in any position including stacking of serviceable material and disposal of unserviceable material of debris at directed place, including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 22.00 Cum 1747.36 38441.92
4(b) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 2.00 Cum 3012.00 6024.00
4(c) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 25.00 Sqm 46.35 1158.75
4(d) Dismantling roofing including MS Truss, ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead and useable dismantled material to civil maintenance Township store or as directed by EIC, all complete with cost of transportation, loading , unloading, T&P, cleaning the area etc, all complete as per specification and direction of Engineer-in-charge. 70.00 Sqm 65.56 4589.20
4(e) Making the opening for door/ window/ clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. 3.00 Sqm 1072.36 3217.08
4(f) Dismantling tile work in wall , floors and roofs laid in cement mortar for thickness of tiles 10 mm to 25 mm of any description and in any position stacking of serviceable material and disposal of unserviceable material of debris at directed place, including stacking material within 50 metres lead, cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 115.00 Sqm 62.25 7158.75
5 Providing & laying PCC: 1:4:8(1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work as per specification and direction of E.I.C 55.00 Cum 5777.61 317768.55
6 Providing and fixing M.S. Foundation bolt of 20 mm dia with hexagonal or square head screwed at one end to be fitted with washers and hexagonal or square nut including all labour, material, cartage, T&P etc all complete as per specification and direction of EIC. 22.00 Kg 135.15 2973.30
7(a) Providing, fabricating and fixing Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete with cut to length in required shape and sizes , welding, drilling holes, removal of welding burrs, all lead & lifts, etc. cutting hole, drilling, fixing in wall with hold fast including all labour, material, T&P, cartage, wastage etc. all complete as per specification and direction of EIC. 370.00 Kg 113.40 41958.00
7(b) Providing and fixing in position collapsible steel shutters with vertical channels 20x1 0x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys or as approved by EIC and complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer as specified, erected in position and securing runners with holdfasts and brackets including labour, material, T&P, cartage, wastage etc. all complete as per specification and direction of EIC. 7.00 Sqm 9702.51 67917.57
8 Providing & fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steet sheet 0.50mm thick in horigantal/vertical in roof covering / cladding to wall, fixed with self drilling and self tapping screws as specified by manufacturar of any approved colour and quality of make National/TATA/ Bhushan/Jindal or as approved by EIC. The minimum end lap of sheet should not be less than 150 mm or as per manufacturer instructions and the minimum side lap of sheet should be as per manufacturer instructions or direction of EIC .The sheet shall be supplied as per site requirement to suit site dimensions. including cutting, wastage , all necessary L or J hooks where required, bitumenous cup and washer etc. with all labour , material, T & P, safety arrangements etc. all complete as per specification and direction of EIC. 21.00 Sqm 626.49 13156.29
9(a) Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). All work up to plinth level, excluding the cost of centering, shuttering, finishing and reinforcement all complete with labour, material, T&P etc. as per specification and direction of E.I.C 15.00 Cum 7672.16 115082.40
9(b) Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). All work above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement all complete with labour, material, T&P etc. as per specification and direction of E.I.C 31.00 Cum 9204.94 285353.14
10 Providing, laying and fixing pre- cast drain/ trench covers in reinforced cement concrete 1:1½:3 (1cement, 1.5 coarse sand, 3- 20 mm size graded stone aggregate of Bharatcoop, Dala, Jhansi) including necessary shuttering, sides and all edges finished and set at position with cement mortar 1:3 (1cemennt, 4coarse sand) , suitable arrangement for lifting and placing at site, including labour, material, T&P etc. all complete as per direction of E.I.C. 1.00 Cum 7401.69 7401.69
11 Providing, fixing and laying TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/ Kamdhenu or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 4700.00 Kg 91.47 429909.00
12(a) Providing, fabricating, fixing and removing, Form work / shuttering of side of Foundations, footings, bases of columns, etc. for mass concrete with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings, ladders, gangways, use & wastage of timber, removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 34.00 Sqm 332.60 11308.40
12(b) Providing, fabricating, fixing and removing, Form work / shuttering of side of Lintels, beams, plinth beams, girders, bressumers and cantilevers with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs, all braces, struts, balli, etc,with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 140.00 Sqm 624.58 87441.20
12(C ) Providing, fabricating, fixing and removing, Form work / shuttering of side of Columns, Pillars, Piers, Abutments, Posts and Struts with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 50.00 Sqm 815.33 40766.50
12(d ) Providing, fabricating, fixing and removing, Form work / shuttering of Suspended floors, roofs, slab, sunshed, landings, balconies and access platform etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 158.00 Sqm 786.45 124259.10
13(a) Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and in foundation and plinth, for walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 14.00 Cum 6049.23 84689.22
13(b) Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level including necessary cutting of bricks as required , wastages,straight or curved, work up to floor V level including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 31.00 Cum 7723.22 239419.82
14 Providing and laying Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) in superstructure above plinth level including necessary cutting of bricks as required , wastages,straight or curved, work up to floor V level including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 8.00 Sqm 953.15 7625.20
15(a) Providing and laying 40 mm thick, cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size of Bharatcoop/Dala/Jhansi) laid in panels, finished with a floating coat of neat cement slurry including rounding of edges, making /finishing surface even and smooth with using extra cement , in required shape , size & gradients etc including all labour, material, T&P, side shuttering, curing etc all complete as per specification and direction of EIC. 17.00 Sqm 520.93 8855.81
15(b) Providing and fixing glass dividing strip 04 mm thick and 40 mm wide in cement concrete flooring including cutting, placing in position / panels as per designed size and gradient, all labour, material, wastages, curing , T&P, etc complete all as required and directed by EIC. 15.00 RM 77.82 1167.30
15(c) Providing and laying matt finished vitrified tile of size 300x300x9.8 mm or 400x400x9.8 mm of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 43.00 Sqm 1234.61 53088.23
16 Providing and laying cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size of Bahratcoop /Dala / Jhansi) in floor, pavement, drain beds or any other similar description of works etc. in required shape, size and gradients, including manual / mechanical mixing, wastage, compaction, curing also making contraction joints/grooves if required in pavement with all labour, material, T&P etc all complete as per direction of EIC. 24.00 Cum 7289.99 174959.76
17 Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC 343.00 Sqm 335.32 115014.76
18 Providing ,rendering, screeding, dubbing out cement plaster 15 mm thick at any depth / height in cement mortar 1:4 (1 cement : 4 Coarse sand )on brick or concrete surfaces of any description fair/rough side ,finishing fair or trowelled to a smooth & even finish with using extra cement including scaffolding ,labour, material, curing, T&P etc. all complete as per specification and direction of EIC. 23.00 Sqm 405.33 9322.59
19 Providing ,rendering, screeding, dubbing out cement plaster 12 mm thick on ceilings at any depth/height in cement mortar 1:4 (1 cement: 4 Coarse sand )on brick or concrete surfaces of any description fair/rough side ,finishing fair or trowelled to a smooth & even finish without using extra cement including scaffolding ,labour, material, curing, T&P etc. all complete as per specification and direction of EIC. 117.00 Sqm 303.09 35461.53
20 Providing and laying integral cement based water proofing treatment i.e. Brick Coba With average thickness of 120 mm and minimum thickness at khurra as 65 mm. including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound as approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. 126.00 Sqm 1428.80 180028.80
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound as approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound as approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:
21 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete including all material, labour, T&P, curing, wastage etc. as per specification and direction of EIC. 3.00 Nos. 252.96 758.88
22 Providing & applying approx. 1 mm thick wall care putty with priming coat of make birla, berger , ACC or approved make on surface to give a smooth & even finish at all floors on walls / ceilings or any description of works including removing of existing treatment, preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of Engineer-in-charge. 1957.00 Sqm 132.35 259008.95
23 Providing & applying two coats of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. 1800.00 Sqm 102.41 184338.00
24 Providing and applying two coats of acrylic distemper of approved brand and shade such as Asian/Berger etc. on wall / ceiling including surface preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, blinds etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 531.00 Sqm 53.18 28238.58
25 Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 55.00 Sqm 87.19 4795.45
26(a) Providing & fixing power coating Aluminium anodized sliding window partially fixed and partially sliding of anodized Aluminium section in window shutter, tripple track Al. window with following specification for each window:- i) Outer Al. frame 100x44x2mm section, ii) Three track Al. channel 100x25mmx1.5mm approx, iii) Window Shutter of 12x25 mm appx. Size, for one leaf reflective glass sliding shutter other outer leaf mosquito SS mesh sliding shutter using bearing, handle, intermediate locking sections/channels with T-rubber beading and U-rubber gasket, screw aluminium angle section for fixure etc. clutch type handle (heavy duty) in each shutters, 4.8 mm thick Reflective glass in different colour of make Saint gobain / Modiguard/Triveni / TATA or as approved by EIC, including Stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed on Alluminium framed shutter tolerance as per manufacturer / IS specifications and member will be fitted as per drawing c/c horizontally and vertically both ways complete in all respects including material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC. 18.00 Sqm 6862.00 123516.00
26(b) Providing, fabricating and fixing of powder coated aluminium hinged door partly glazed al. door of extruded sections of high strength and weight ratio (All the aluminium section are to be anodised for door shutter (All the aluminium section/ fittings are to be anodised 50 micron minimum). Vertical frame of 83 x 44 x 2 mm for style, Top & middle rail section 83 x 44 x 2 mm and bottom rail section of 114 x 44 x 2 mm (with tolerance ± 5%) and cut to length, joints mitred, and corners grinded and jointed with aluminium angle cleats with fins to match the section of frame , including providing & fixing 5 mm thick plain float glass panes of Modiguard/Saint Gobain/ Triveni / TATA etc or approved make fixed with heavy duty 0.70mm thick aluminium clips, neoprene rubber gasket, angle cleat etc at top portion and providing and fixing 4mm thick APP sheet in bottom portion ( approx 0.9m height)of approved shade and colour, approved brand like alcon, 4 no heavy duty MS hinges for fixing Door shutter(Heavy duty), 6 levers Alfa Lock with 3 Nos Kay, Aluminium handle etc all labour, material, T&P, transportation, wastage, necessary screws and dash fastener for fixing of frame and other required fixture for proper completion of work as per specification & direction of E.I.C.(Tolerance of Aluminium members ± 5% or as per manufactures/IS specification in thickness) 5.00 Sqm 4080.00 20400.00
26(C) Providing fabricating and fixing of aluminium Ventilators of extruded section jointed with Aluminium angles, cleats with fins to match the section of the frame (All the aluminium section are to be powder coated with 50 micron minimum) including providing & fixing SS mosqtuito proof jali with the help of aluminium beading / Aluminium Cilip and fixing of Aluminium grills of 3" size all complete as per drawing and size of section will be 63x38x2mm and min 02 horizontal members or as per site requirement with tolerance of +/- 5% or as per Manufacturers and member will be fitted with 0.60 M approx. C/C horizontally and 1.20 M approx. C/C vertically or as per site requirement including all labour, material, T&P, transportation, wastage, necessary screws and dash fastener for fixing of frame and other required fixture for proper completion of work as per direction of E.I.C. (Tolerance of Aluminium members ± 5% or as per manufactures/IS specification in thickness) 10.00 Sqm 8760.64 87606.40
27(a) Providing and fixing Modular Kitchen cabinets wooden cup-boards above counter kitchen top approximatley 2 fit, height above the counter slab, the Modular cabinet/cup-board box made with with 18 mm thick HDHMR Board OSL (one side lamination) of Century/ Green/ Austin ISI Mark, rear side of cabinate to be fixed 12mm HDHMR Board BSL (both side lamination). The cabinate shutters shall be 5mm thick glass pane fixed into 75mm wide frame of 18mm thick HDHMR board, inside cabinate one dividing shelve of 8mm thick clear glass of Modigards/ sentgovind/TATA, the exposed and outer surface of board shall be fixed 1.00 mm thick decorative mica in approved colour/ design/pattern of (Sunmica/ Virgo/ Century/ Merino/ Formica / Greenlam) brand. The depth of modular cabinet shall be 300 mm. The size of each cup-board box of composite modular cabinets shall be approximately 400 X 600 mm (400mm wide / 600mm height ) including chrome finished profile handles, edge bending, adhesive, nails, screws . all complete with labours, materials, T&P, wastage etc. Area of ready composite wooden modular shall be measured as length of composite modular multiplied by its height in front elevation. All complete as directed by EIC.Note- (1mm thick mica to be paid separately). 4.00 Sqm 12159.00 48636.00
27(b) Providing and fixing Modular Kitchen cabinets below counter platorm of kitchen with shutters wherever required, made of 18 mm thick thick HDHMR Board OSL (one side lamination) of Century/ Green/ Austin ISI Mark, and back side and Innotech Drawer sides and bottom 12mm thick HDHMR board BSL (both side lamination) the exposed and outer surface of board shall be fixed 1.00 mm thick decorative mica in approved colour/ design/ pattern of (Sunmica/ Virgo/ Century/ Merino/ Formica / Greenlam) brand. The depth of wooden modualr cub boards shall be 600 mm approx. The size of each cup-board box of composite modular cubboards shall be approximately 450 mm to 600 mm wide and 600mm deep and 750mm hieght approxiately horizontal partition slab of 18 mm HDHMR Board to be provide wherever required at site condition beneath the sink portion double leaf openable cabinet comprising by horizantal and vertical HDHMR Board BSL (both side lamination) blocks to be made as per site conditions including chrome finished profile handles, edge bending, adhesive, nails and screws . all complete with labours, materials, T&P, wastage etc. Area of ready composite wooden modular shall be measured as length of composite modular multiplied by its height in front elevation including the area below washing sink. All complete as directed by EIC. Note- (1mm thick mica to be paid separately). 5.00 Sqm 13414.00 67070.00
27(c) Providing and fixing wardrobe shutter made with 18 mm thick HDHMR Board OSL (one side lamination) of Green/ Austin ISI Mark. The wardrobe shutter fixed in the frame of 80mm to 100mm width and 18 mm thick HDHMR Board OSL (one side lamination). The exposed and outer surface of shuttersof wardrobe shall be fixed 1.00 mm thick decorative mica in approved colour/ design/ pattern of brand. The size of each cup-board shall be approximately 900X 2200mm (900mm wide / 2200mm height ) with 4 nos. handle for each wardrobe including adhesive, nails, screws . all complete with labours, materials, T&P, wastage etc. Area of ready composite wadrobe shutter shall be measured as length front face of wardrobe shutter multiplied by its height in front elevation. All complete as directed by EIC. Note- (1mm thick mica to be paid separately). 8.00 Sqm 3980.23 31841.84
27 (d) Suplying and fixing of set of pair of Auto Closing Hydraulic hinges of Godrej, Hettich, or equivalent approved make half or full overlay to be fixed in ward robe wooden shutters with required size of SS Screws in position including cost of all materials, labour, T&P all complete as per specification and as directed by E.I.C. 66.00 Nos 199.00 13134.00
27( e) Supplying and fixing in position 1.00MM thick Decorative laminate (Mica) type I of surface finish, coloured & designer pattern of (Sunmica/ Virgo/ Century/ Merino/ Royal touche/ Sundek/ Formica/ Tajpuria/ Heritage/ Greenlam or equivalent approved make and brand, fixed with recommended adhesive as per manufacturer's specification etc., for wooden work of ward robes, cubicles and partitions, wooden furniture and wall paneling. Area of ready composite wooden modular or wardrobe shutter shall be measured as length of composite modular multiplied or wardrobe shutter by its height in front elevation. including cost of all materials, labour, T&P etc all as specified and as directed by E.I.C. 17.00 Sqm 1020.00 17340.00
28 Providing & laying heavy duty vitrified tiles for out door of size 600x600mm thickness 15 mm of 1st quality of approved shade & brand like Kajaria/ Johnson/ somany or other equivalent brand, grouting of tiles with neat cement slurry and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 85.00 Sqm 2372.00 201620.00
29 Providing and fixing anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 32.00 KG 541.42 17325.44
30 Providing & laying glazed ceramic wall tiles of size 450x300 mm or larger size with 1st quality of Kajaria/Somany or approved make by EIC including provision of pencil tiles / decorative bands / border in wall tiles , skirting and dado in bedding layer 15mm av. Thickness in CM 1:3 (1cement, 3coarse sand) jointing with grey cement slurry @ 3.3kg per sqm, and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P, curing, scaffolding all complete as per specification and direction of E.I.C. 121.00 Sqm 1075.41 130124.61
31 Providing & fixing Granite slab 18mm-20mm thick of machine cut, pre-polished Black/ Cherry/Ruby Red or equivalent for flooring including cutting the stone as per required dimension (size) grinding and polishing, laid over 20mm thick av. cement screed base in 1:4 (1cement, 4coarse sand) , filling the joints with suitable filler and matching pigment including all labour, material, wastage T&P etc all complete as per specification and direction of EIC 39.00 Sqm 3800.82 148231.98
32 Providing , fabricating and fixing M.S. frames for doors, windows and ventilators, MS grill, grating, railing made out from MS square sections, M.S. angles and M.S. flats as per design, electrically welded and fixed in chowkhats with screws or treads of steps and R.C.C. balcony slabs in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 hard stone aggregate 12.5 mm nominal size) including labour, material & T&P grinding etc. all complete, as per drawing, specification and direction of EIC. 35.00 Kg 110.68 3873.80
33 Providing and fixing to door frame (MS/ Wooden) flush door shutter 30 mm thick (Single / double leaf) phenol formaldehyde bonded, core of block board construction with frame of hard wood all round lipping, commerical ply on both faces of shutters of Gee doors/Kit ply/ Swastik or other approved make, ISI mark as approved all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including 4 nos for each leaf Stainless Steel butt hinges with necessary screws labour, material, T&P, cartage, wastage etc all complete as per direction of EIC. 3.00 Sqm 2686.90 8060.70
34 Supplying and fixing aluminium powder coating fitting with necessary fixtures all complete. 0.00
(a) Providing and fixing anodised aluminium sliding door bolt 250x16 mm of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 2.00 Nos. 221.03 442.06
(b) Providing and fixing Tower bolt anodised Aluminium 200mm long of apporved make such as classic, shivalik, diamond or any other approved make as per specification and direction of EIC. 1.00 No. 84.56 84.56
( c) Providing & fixing anodized Aluminium handle 125 mm grip length of apporved make with necessary screws, such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 2.00 Nos. 56.19 112.38
35 Providing & fixing anodized Aluminium door stopper double peg ISI marked of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC.. 1.00 No. 33.59 33.59
36 Providing & fixing heavy duty Aluminium extruded hudraulic door closure universal type sleek model, ISI marked of Amar/ Everite make or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 2.00 Nos. 833.86 1667.72
37 Cutting holes up to 30x30 cm in walls or existing manholes built in brick wall / concrete wall for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel ( ½ round or 3/4 section ) in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4- 20mm graded stone aggregate) smooth finished and reforming benching as required including all labour, material, cutting, fixing, T&P etc. all complete as per specification and direction of EIC. 1.00 No. 353.51 353.51
38 Providing, laying and fixing 22 mm thick coloured chequered precast cement concrete tiles size 25 x25 cm or 30 x 30cm or as directed by EIC over a bedding layer of 20 mm thick average cement sand mortar 1:4 (1 cement : 4 Coarse sand) jointed and pointed with pigmented neat cement slurry in floors and a coat of cement painting on finished surface with matching colour . All complete with labour and material, wastage, tool & Plants required for proper completion of works etc. as directed by EIC. 322.00 Sqm 1189.11 382893.42
Sanitary Fittings 0.00
39(a) Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 20mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand , cost of cutting chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 20.00 RM 455.97 9119.40
39(b) Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 25mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand , cost of cutting chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 10.00 RM 532.00 5320.00
40(a) Providing & fixing 100/ 110 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 18.00 RM 320.09 5761.62
40(b) Providing & fixing 75 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 5.00 RM 211.02 1055.10
41(a) Providing & fixing 100/ 110 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 5.00 Nos 127.52 637.60
41(b) Providing & fixing 75 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 2.00 Nos 89.82 179.64
42(a) Providing & fixing 100/ 110 mm dia PVC (SWR) Tee of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 2.00 Nos 187.74 375.48
42(b) Providing & fixing 100/ 110 mm dia PVC (SWR) Tee with door of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 3.00 Nos 198.59 595.77
42(c ) Providing & fixing 75 mm dia PVC (SWR) Tee of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 1.00 No. 122.39 122.39
43 Providing and fixing SS Cockroach Trap 100mm dia round with waste hole of Prayag, Hindware, Parryware, Plumber, Silver Shine Kitchen Sinks or equivalent as approved by EIC including labour, material, T&P etc as per specification & direction of EIC. 4.00 Nos 474.00 1896.00
44 Supplying and fixing to wall C.P. Soap tray of approved sample and quality, size, make Plumber, L&K, essess, Jaquar, Marc etc. or any other approved make including labour, T&P, material etc. complete as per specification & direction of E.I.C. 3.00 Nos 416.00 1248.00
45 Providing and fixing CP Sink mixer with regular spout(W/M) for Kitchen stainless steel sinks of Prayag, Hindware, Parryware, Plumber, or as approved by EIC including labour, material, T&P, wastage etc. as per specification & direction of EIC. 3.00 Nos 3780.00 11340.00
46 Providing and fixing 600 x 450 mm x 5.00 mm bevelled edge mirror with the holes on all the four corners of the glass of Modiguard/Saint Gobain/Atul or as approved by EIC, complete fixed with SS spacers or 6 mm thick asbestos sheet/ commercial hard board as required, fixed to wooden / PVC cleats with C.P. brass screws and washers all complete with labour, material, T&P etc and as per specification and direction of EIC. 3.00 Nos 1363.78 4091.34
47 Providing & fixing CP brass long body bib cock 15 mm dia of Prayag / L&K / Hindware / Parryware / Plumber or as approved by EIC including labour, material, T&P, soota, safeda etc including removal of existing bathroom fittings if requred all complete as per specification & direction of E.I.C. 3.00 Nos 677.63 2032.89
48 Providing and fixing Chromium plated Towel rail 600 mm length or as approved by EIC, including all required accessories etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 3.00 Nos 601.30 1803.90
49 Providing and fixing 600x120x5 mm CP glass shelf of make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC, including all required accessories, C.P. brass brackets, 40 mm long screws, rawl plugs etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 3.00 Nos 918.97 2756.91
50 Providing and fixing CP Towel ring minimum 200mm dia of approved make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC, including all required accessories etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 3.00 Nos 196.73 590.19
51 Providing and fixing Stainless Steel kitchen sink with C.I. brackets, waste pipe, and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 3.00 Nos 4190.55 12571.65
Part-B - Electrical works 0.00
1 Supply & making point wiring with PVC insulated multistrand copper wire of size 2X1.5 sq mm for light & fan light point with 1X1.5 sqmm. earth wire((for fan points only)) (ISI mark), grade 1100V make-Havells/ Anchor/ National/ Polycab/ Gloster/Finolex/ Kei/ RR Kabel/ Cap cab in appropriate size of PVC conduit(ISI marked), medium class, concealed in wall by cutting, plastering, matching painting/on wall surface with accessories such as bends, junction boxes, inspection boxes, sheet cover, socket, lock nut, brass bush,saddle, screw-gullies etc.(as required) or in existing conduit(as per site) with s&f of modular metal box concealed in wall/on wall surface with modular frame, plate for fixing of switch, socket , fan regulator etc., internal connection, testing complete in all respect as per EIC.(Note: (i). Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green. (ii). Switch socket colour White/Cream or as directed by EIC)
a) Light point & Fan point wiring as per item above by providing & fixing 5/6 Amp modular switch Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make, making connection & testing complete in all respect. 30.00 Nos. 1429.77 42893.10
b) Secondary light point (extension point) wiring as per item above, controlled by the switch (as per item 1) by multistrand copper wire of size 1.5 sqmm. 20.00 Nos. 834.03 16680.60
c) Supply & fixing two module stepped type fan regulator make: Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make on the same board (Item No. 1), making connection & testing complete in all respect. 5.00 Nos. 337.30 1686.50
d) Supply & fixing of 5/6 Amp modular multi socket (3 pin) - 01 No. & 5/6 Amp modular switch - 01 No., Anchor/Havells/L&T/Legrand/GM/ABB make on the same board (Item No. 1), making connection & testing complete in all respect. 5.00 Nos. 215.64 1078.20
2 Supply & making Circuit wiring from SPN/TPN D.B. to switch board & Power Point with 2x2.5 sq. mm. multistrand copper wire (ISI marked) with 1X2.5 sqmm. earth wire (ISI mark), grade 1100V make - Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex/ Kei/ RR Kabel/Cap cab for continuity.(Note: Color code for Phase wire:Red/ Yellow/ Blue, Neutral: Black & Earth: Green). 180.00 Mtrs 260.95 46971.00
3 Supply & fixing of modular 6pin, 5/6A & 15/16A socket outlet and 15/16A switch- 01 each, Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make by S&F of appropriate modular metal box with modular frame, plate, screw etc. by cutting, plastering, matching painting/on wall surface(as required) , making connection & testing complete in all respect as per direction of EIC..(Note: i) Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green ii). Switch socket colour White/Cream or as directed by EIC). 10.00 Nos. 552.95 5529.50
4 Supplying, installation, Testing & Commissioning of 50 watt Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P.F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tiltable fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K/6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). make Crompton/Surya/Havells/Philips/Bajaj/Syska. 10.00 Nos. 1685.69 16856.90
5 Supply, Installation, Testing and Commissioning of ceiling fan 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) with BrushLess Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 60-75 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. Make: Usha/ Orient/ Bajaj/ Havells/ Crompton/ Atomberg, complete in all respect as per EIC. 5.00 Nos. 2261.29 11306.45
6 Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) 18- 22 Watt, and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K 46 DELHI SCHEDULE OF RATES (E&M)-2025(As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Make: Usha/ Orient/ Bajaj/ Havells/ Crompton/ Syska/Philips/GM, complete in all respect as per EIC. 25.00 Nos. 615.88 15397.00
7 Supply and fixing of Exahust Fan (metal - heavy duty) 18 inch size, make Crompton/Surya/Havells/Philips/Bajaj/Vansal on wall, connection & testing, complete in all respect as per EIC. 5.00 Nos. 5207.25 26036.25
8 Supplying and fixing of 8 way (4 + 24), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs without MCCB and MCBs. Make: Legrand /Havells /L&T / Hager/ Schneider/ ABB/ Anchor/ Indoasian/ Eaton 1.00 No 8998.15 8998.15
9 Providing and fixing 100 A, 16 KA,TPMCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. Make: Legrand /Havells /L&T / Hager/ Schneider/ ABB/ Anchor/ Indoasian/ Eaton 1.00 No 3358.79 3358.79
10 Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Triple poles in the existing MCB DB complete with connections, testing and commissioning etc. Make: Legrand /Havells /L&T / Hager/ Schneider/ ABB/ Anchor/ Indoasian/ Eaton 2.00 Nos. 897.80 1795.60
11 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as per direction of EIC. Make: Legrand /Havells /L&T / Hager/ Schneider/ ABB/ Anchor/ Indoasian/ Eaton 10.00 Nos. 239.13 2391.30
12 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 50.00 Nos. 11.75 587.50
13 Supply, Laying and testing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5CX35 sq. mm (clamped with 25x3mm MS flat clamp on wall surface). Make: Gloster//Havells/National cables/Polycab/TESCAB, as per standard code of practice as per direction of EIC. 150.00 Meter 469.29 70393.50
14 End Termination of 3.5CX35 sqmm.size 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable with brass compression gland, Al. lug etc. as per direction of EIC. 2.00 Nos. 366.67 733.34
15 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required., Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make by S&F by cutting, plastering, matching painting/on wall surface(as required) appropriate modular metal box with modular frame, plate, screw etc., making connection & testing complete in all respect as per direction of EIC. 5.00 Nos. 677.13 3385.65
16 Supply & making point wiring with PVC insulated multistrand copper wire of size 2X4.0 sq mm+1X4sqmm. earth wire (earth connection by looping) (ISI marked) make Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex in appropriate size of PVC conduit(ISI marked), medium class, concealed in wall by cutting, plastering wall surface(as required) with all accesories such as bends, Junction boxes, Junction box cover (laminated sheet), inspection boxes, socket, lock nut etc. (as per site) for power point. 50.00 Meter 312.97 15648.50
17 Supplying and fixing 32 Amp., 415 V, Industrial type 5 pin socket outlet, with (3 Pole, Nuetral and earth), plug top along with 32 Amp. "C" curve, TPN MCB, in sheet steel enclosure, on surface or in recess, for the socket out let make: Anchor/ Havells/ L&T/ Legrand/ABB and complete with connections, testing and commissioning etc. complete in all respect as per direction of EIC. 1.00 No. 3656.65 3656.65
18 Supply and making point wiring with PVC insulated multistrand copper wire of size of 4 X 6 sq. mm + 2 X 6 sq. mm earth wire (earth connection by looping) (ISI marked) make Havells/Anchor/National/Polycab/Gloster/Finolex in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering wall surface(as required) with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. as per site for AC point. 10.00 Meter 682.16 6821.60
19 Supply, making & testing of earth pit for earthing as per IS standard the job involves digging of pit up to 4.5 meter deep, supply & fixing of GI pipe 40mm dia (Internal) 4.5mtrs long, class B, make Jindal/TATA, wooden charcoal & salt (40 Kg each approx) suitable GI reducer CI funnel CI hinged Chamber cover with frame size 12" X 12" GI nipple etc and perforation from bottom, making of Earth Chamber and S&F of earth resistance identification marker with MS angular channel of thickness 5 mm of size 40 mmx40mm of length 450mm. the channel shall be grouted approximately 300 mm x 300mm x300mm depth of which 150 mm will be below the ground cement concrete pedestal work with 300 mm channel above the ground length just next to earthing pit as per direction of EIC. 2.00 Nos. 6425.57 12851.14
20 Supply, laying of 25mm x 5mm GI strip at 0.5 meter below ground as strip earth electrode including connection/terminating with GI nut-bolt-spring washers etc.complete as required(jointing shall be done by overlapping and with 2sets of GI nut bolt & spring washer spaced at 50mm) as per instructions of engineer in charge. 50.00 Meter 134.25 6712.50
Total (Civil + Electrical) 4757933.12
Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00
Sub Total 4757933.12
Add BOCW @ 1% on sub total 47579.33
Add GST @18% on sub total 856427.96
Total Quoted value including GST @18% 5661940.00
Annexure-D (Para 4.6.4)
Abstract Estimate
Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)
Time Required for
(a) Conclusion of Contract - 03 months
(b) Completion of works- 12 months
Sl. No. Particulars Amount in Rs. Reference
1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.
(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]
Grand Total #REF!
Say Rs. #REF! Lakhs
Manager (Works) ATA
HINDUSTAN AERONAUTICS LIMITED
AVIONICS DIVISION, KORWA
POST OFFICE: HAL, TEH: AMETHI
DISTT: AMETHI (UP) - 22 74 12
Comparative price statement( as per estimated rate)
Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.
C. A. No- HAL/KWD/Civil / 02 of 2015-16
PART 'A' MES ITEMS
S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate
Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage
13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735
16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669
19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675
Rebate offered (in %age) if any 2.00
Status of Parties L-2 L-1 9.380172329
Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)
D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya
HINDUSTAN AERONAUTICS LIMITED
AVIONICS DIVISION, KORWA
POST OFFICE: HAL, TEH: AMETHI
DISTT: AMETHI (UP) - 22 74 12
SCHEDULE - 'A' Part 'B'
Comparative price statement( as per estimated rate)
Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.
C. A. No- HAL/KWD/Civil/21 of 2013-14
PART 'B' NON MES ITEMS
S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate
Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount
1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909
2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00
3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00
Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)
D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya
HINDUSTAN AERONAUTICS LIMITED
AVIONICS DIVISION, KORWA
POST OFFICE: HAL, TEH: AMETHI
DISTT: AMETHI (UP) - 22 74 12
Comparative price statement( as per estimated rate)
Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.
C. A. No- HAL/KWD/Civil / 02 of 2015-16
PART 'A' MES ITEMS
S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate
Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage
13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85
16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3
19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925
Rebate offered (in %age) if any 2.00
Total Amount (Part-B) 168130.00 208000.00 188500.00
Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38
Status of Parties L-2 L-1
Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)
D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya
Hindustan Aeronautics Limited
(Avionics Division, Korwa)
DEPARTMENT OF CIVIL ENGINEERING
CHECK LIST FOR SUBMITTING E-TENDER
NAME OF WORK:- Construction of Kitchen and store Room for Community Center in Township at HAL Korwa.
NIT No.- HAL/KWD/Civil/06 of 26-27 Date: 25.05.2026
Name of Contractor:
S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below
1 ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2025 of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).
2 EMD (As per NIT)
3 SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.
4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.
5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR
i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR
ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.
6 Registration certificate with Government department and Government undertaking, if any.
7 Proof of GST registration
8 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.
9 Constitution and legal status.( Partnership/ Proprietary)
10 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.
11 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.
12 Tenderers are required to attach Format of undertaking as per Annexure I & J
13 Signature done, wherever required.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
1NIT.pdf
TENDER_DOCUMENT • 1.43 MB
5Pricebid.xlsm
TENDER_DOCUMENT • 0.14 MB
2Technicalbid.pdf
TENDER_DOCUMENT • 2.29 MB
4Chceklist.xlsm
TENDER_DOCUMENT • 0.07 MB
3Pricebidfreeview.pdf
TENDER_DOCUMENT • 0.57 MB
Download all tender documents and submit your bid
| # | Company Name | Location | Address |
|---|---|---|---|
| 1 | PREETI ENTERPRISES | LUCKNOW,India | B-1102, INDIRA NAGAR LUCKNOW,B-1102, INDIRA NAGAR LUCKNOW,LUCKNOW,Uttar Pradesh,India,Pin-226016 |
| 2 | P.K. TRADERS | SULTANPUR,India | MISHRAULI PAKHRAULI SULTANPUR,,SULTANPUR,Uttar Pradesh,India,Pin-228001 |
| 3 | CHANSLAR ESTATE PRIVATE LIMITED | Kanpur,India | 168 N Block,Kidwai Nagar,Kanpur,Uttar Pradesh,India,Pin-208011 |
| 4 | EVEREST ELECTRO MECH ENGINEERS | LUCKNOW,India | 3/212,SEC H JANKIPURAM,LUCKNOW,Uttar Pradesh,India,Pin-226021 |
PREETI ENTERPRISES
LUCKNOW,India
B-1102, INDIRA NAGAR LUCKNOW,B-1102, INDIRA NAGAR LUCKNOW,LUCKNOW,Uttar Pradesh,India,Pin-226016
P.K. TRADERS
SULTANPUR,India
MISHRAULI PAKHRAULI SULTANPUR,,SULTANPUR,Uttar Pradesh,India,Pin-228001
CHANSLAR ESTATE PRIVATE LIMITED
Kanpur,India
168 N Block,Kidwai Nagar,Kanpur,Uttar Pradesh,India,Pin-208011
EVEREST ELECTRO MECH ENGINEERS
LUCKNOW,India
3/212,SEC H JANKIPURAM,LUCKNOW,Uttar Pradesh,India,Pin-226021