GENERAL-LIFT IRRIGATION SCHEMEAnnual Maintenance of LI Scheme in Kuruppanthara Section for the year 2024-2025- General Civil Work

Amount

APPENDIX A - KIDANGOOR LI Scheme

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD16299/2024-2025:Charges for dismantling motor and pump from the base plate for one motor and other related accessories from LI station and conveyed to the work shop with the help of chain block, wire sling , coir rope etc complete as directed by the departmental officers at site

OD16300/2024-2025:overhauling the the existing motor, separate the strator and rotor of motor , remove the dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearings assembling and refitting the same, and conducting test run etc complete as per the direction of departmental officers at site

OD16301/2024-2025:Charges for erecting 1 no motor with corresponding pump and other accessories in correct alignment on bed including porviding electric connections and trial running etc complete

OD16302/2024-2025:charges for resetting vacuum pump on correct alignment including damaged pipe refixing the valve, checking the joints etc complete

OD16303/2024-2025::supplying transformer oil

OD16304/2024-2025:Supplying engine oil

OD16305/2024-2025:Supplying grease

OD16306/2024-2025:Supplying carbon brush

OD16307/2024-2025:Supplying graphite packing

OD16308/2024-2025:Supplying and providing 12 mm gland packing

OD16309/2024-2025:Supplying water seal

Appendix B-MEVELLOOR LI SCHEME

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

OD16279/2024-2025::supplying transformer oil

OD16280/2024-2025:Supplying water seal

OD16281/2024-2025:Supplying carbon brush

OD16282/2024-2025:Supplying and providing 12 mm gland packing

OD16283/2024-2025:Supplying grease

OD16284/2024-2025:charges for resetting vacuum pump on correct alignment including damaged pipe refixing the valve, checking the joints etc complete

OD16285/2024-2025:Charges for erecting 1 no motor with corresponding pump and other accessories in correct alignment on bed including porviding electric connections and trial running etc complete

OD16286/2024-2025:overhauling the the existing motor, separate the strator and rotor of motor , remove the dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearings assembling and refitting the same, and conducting test run etc complete as per the direction of departmental officers at site

OD16287/2024-2025:Charges for dismantling motor and pump from the base plate for one motor and other related accessories from LI station and conveyed to the work shop with the help of chain block, wire sling , coir rope etc complete as directed by the departmental officers at site

APPENDIX C- MULAKKULAM SOUTH KUNNAPPALLY 1st AND 2nd STAGES LI SCHEME

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

OD16310/2024-2025::supplying transformer oil

OD16311/2024-2025:Supplying water seal

OD16312/2024-2025:Supplying carbon brush

OD16313/2024-2025:Supplying and providing 12 mm gland packing

OD16314/2024-2025:Supplying grease

OD16315/2024-2025:charges for resetting vacuum pump on correct alignment including damaged pipe refixing the valve, checking the joints etc complete

OD16316/2024-2025:Charges for erecting 1 no motor with corresponding pump and other accessories in correct alignment on bed including porviding electric connections and trial running etc complete

OD16317/2024-2025:overhauling the the existing motor, separate the strator and rotor of motor , remove the dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearings assembling and refitting the same, and conducting test run etc complete as per the direction of departmental officers at site

OD16318/2024-2025:Charges for dismantling motor and pump from the base plate for one motor and other related accessories from LI station and conveyed to the work shop with the help of chain block, wire sling , coir rope etc complete as directed by the departmental officers at site

APPENDIX D- MULAKKULAM SOUTH LI SCHEME

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

OD16319/2024-2025::supplying transformer oil

OD16320/2024-2025:Supplying grease

OD16321/2024-2025:Charges for dismantling motor and pump from the base plate for one motor and other related accessories from LI station and conveyed to the work shop with the help of chain block, wire sling , coir rope etc complete as directed by the departmental officers at site

OD16322/2024-2025:overhauling the the existing motor, separate the strator and rotor of motor , remove the dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearings assembling and refitting the same, and conducting test run etc complete as per the direction of departmental officers at site

OD16323/2024-2025:Charges for erecting 1 no motor with corresponding pump and other accessories in correct alignment on bed including porviding electric connections and trial running etc complete

OD16324/2024-2025:charges for resetting vacuum pump on correct alignment including damaged pipe refixing the valve, checking the joints etc complete

OD16325/2024-2025:Supplying and providing 12 mm gland packing

OD16326/2024-2025:Supplying carbon brush

OD16327/2024-2025:Supplying graphite packing

OD16328/2024-2025:Supplying water seal

APPENDIX E - PRAYAR LI SCHEME

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD16288/2024-2025:Charges for dismantling motor and pump from the base plate for one motor and other related accessories from LI station and conveyed to the work shop with the help of chain block, wire sling , coir rope etc complete as directed by the departmental officers at site

OD16289/2024-2025:overhauling the the existing motor, separate the strator and rotor of motor , remove the dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearings assembling and refitting the same, and conducting test run etc complete as per the direction of departmental officers at site

OD16290/2024-2025:Charges for erecting 1 no motor with corresponding pump and other accessories in correct alignment on bed including porviding electric connections and trial running etc complete

OD16291/2024-2025:charges for resetting vacuum pump on correct alignment including damaged pipe refixing the valve, checking the joints etc complete

OD16292/2024-2025::supplying transformer oil

OD16293/2024-2025:Supplying engine oil

OD16294/2024-2025:Supplying grease

OD16295/2024-2025:Supplying carbon brush

OD16296/2024-2025:Supplying graphite packing

OD16297/2024-2025:Supplying and providing 12 mm gland packing

OD16298/2024-2025:Supplying water seal

12.51.3:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:North light curves

Bidder Name

VINOD BHASKAR