Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.5 LAccepted-AOC | ₹12.5 L | 1 | Accepted-AOC Agreement executed on 30/10/2023 |
Tender Value
₹12.5 L
EMD Value
₹31,210
Closing Date
21 Aug 2023, 6:00 pmClosed
SECRETARY
VALLIKUNNAM GP OFFICE VALLIKUNNAM PO
148 No Anganwadi construction w 17
2023_DP_576346_17
01/2023-24/SEC/MGNREGS/VKM
Open Tender
Raw Materials
Item Rate
180 days
VALLIKUNNAM GP
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,500
Yes
₹31,210
Yes
21 Dec 2024
27 Jul 2023
23 Aug 2023
27 Jul 2023
21 Aug 2023
27 Jul 2023
Amount
Stone aggregate 40 mm nominal size
Stone aggregate 20 mm nominal size
Coarse sand zone 3
Portland cement
Hire charges of concrete mixer 0.25 to 0.40 cum
Vibrator (needle type 40 mm)
Stone for masonry work
Stone aggregate 10 mm nominal size
Wall form panel 1250x500 mm
Corner angle 45x45x5 mm 1.50 m long
100 mm channel shoulder 2.50 m long
Double clip (bridge clip)
Single clip
M.S tube 40 mm dia
Solid blocks of size 30x20x15 cm
Solid blocks of size 30x20x20 cm
Solid blocks of size 40x20x10 cm
Structural steel such as tees, angles, channels and R.S joists
Red oxide zinc chromate primer
Adjustable span ESO+SI (2.35-3.040)
Adjustable telescopic prop 3m (2.02-3.75)
Beam clamp 300-380 mm (450-1070 mm)
Second class kail wood in planks
Second class kail wood in scantling
Hollock ballies 125 mm dia
Wall form panel 1250x450 mm
Corner angle 45x45x5 mm 2.50 m long
Column clamp 450x1070 mm
Prop 2 m (2-3.5 m)
Twisted steel / Deformed bar
Flats upto 10 mm thickness
Mild steel round bar 12 mm dia and below
Welding by electric plant
Anjili wood scantles
Mild steel round bar above 12 mm dia
Rawl plug 50 mm (designation 10 nos)
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50X37X1.50 mm
Bright finished or black enameled mild steel screw 40 mm
Bright finished or black enameled mild steel screw 20 mm
Anjili wood planks
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
Fine sand zone 4
Vitrified floor tile 50x50 cm
Ceramic glazed tiles first quality min thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms / litre
Plastic emulsion paint
Pink primer (for wood)
Synthetic enamel paint in black or chocolate shade
PVC pipe 25 mm outer dia 10 kgf / sqcm
PVC pipe 20 mm outer dia 10 kgf / sqcm
PVC pipe 50 mm outer dia 6 kgf / sqcm
PVC pipe 110 mm outer dia 6 kgf/ sqcm
PVC pipe 63 mm outer dia 6 kgf / sqcm
PVC vent cowls 63 mm dia
PVC elbow 63 mm dia
Stainless steel kitchen sink without drain board 470x420 mm bowl depth 178 mm
C.I bracket for wash basin and sinks
15 mm CP brass tap
Polyethylene water storage tank with cover and suitable locking arrangement
Vitreous china oriss type W.C pan size 580 mm
Flushing cistern PVC 10 litre capacity (low level) (white) (with fittings, accessories and flush pipe)
100 mm S.C.I trap with vent heel
Vitreous china flat back wash basin 550x400 mm
C P brass waste 32 mm
Oxidised mild steel handles 125 mm
Oxidised mild steel screws 25 mm
Oxidised mild steel towed bolt (barrel type) 200X10 mm
Oxidised mild steel screws 30 mm
Brass mortice latch and lock 100X65 mm with 6 levers & a pair of brass liver handles
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_873288.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].