Construction of Sub Treasury office building at Baldwara in Tehsil Baldwara Distt. Mandi (HP)

Amount

Cutting In earth work in all kinds of soil such saturated soil pick work, jumper work, hard or soft blasting work including chiselling/wedging out of rock etc, any other mixed classification of soil in all heights and depths including clearance of Jungles and uprooting of trees and bushes etc. stacking the serviceable materials in specified stacks and disposing of all surplus excavated earth with in all leads and lifts disposed earth to be neatly levelled and dressed complete as per the direction of Engineer-in-Charge.

Earth work in excavation in all kind of classification of soil in foundation of structures upto all depth/ height as per drawing and technical specification Clause 305.1 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material and disposal of all surplus excavated earth in specified site and direction of Engineer-in-charge complete.

Excavation in earth work in foundation and trenches in all kinds of classification, soils viz, pick work, pick jumper work, jumper work, blasting work and hard blasting work saturated soils including chiselling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift upto any depth stacking the excavated soil upto any leads and lifts clear from the edge of excavation and then returning the stacked soil in any thickness of layers when required into plinths, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as specified dumping place as per the direction of Engineer-In Charge.

Providing form work with steel plates 3.15mm (Three decimal fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete work In foundation,footings bases of columns and mass concrete including plinth beam and column upto all floors level including carriage of material with in all leads and lifts and other incidentials charges.

In flat surfaces such as soffits of suspended floors,roofs,landing and the like floor upto any thickness in all floor level

In columns, pillars, posts and struts square rectangular or polygonal in plain in all floor level.

In stair cases with slopping or stepped soffits, excluding landing etcetra upto all floor level.

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in all depths and heights in all floor level.

Edge of slabs and breaks in floor an walls.

In vertical surfaces such as wall in wall any thickness 0.10 mm (Zero point millmetre) thickness

Providing and laying cement concrete plain/ reinforced 1:5:10 ( One cement: Five sand: Ten graded crushed stone aggregate 40mm (Forty milimeters) in open foundation as per drawing and technical specification clause 802, 803and 1202,1203 including form work for plian/ reinforced concrete work as per drawing and HPPWD technical specification including entire carriage of material with in all leads and lifts and direction of Engineer- in-Chrage.

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 110mm ( One hundred ten millimetre) dia PVC(poly vinayal chloride) pipe extending through the full width of the structure with slope of 1 vertical : 20 horizontal towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-Chrage.

Providing and laying cement concrete 1:6:12 (One cement: Six sand: Twelve graded crushed stone aggregate) 40mm (Forty millimetre) nominal size mechanically mixed and vibrated including curing complete but excluding cost of form work in foundation and plinth including all heights/depths and carriage of materials within all leads and lifts and other incidentials charges.

Providing and laying cement concrete work 1:2:4 (one cement:two sand:four graded crushed stone aggregateof grade 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in foundation and plinth including carriage of materials within all leads, lifts and other incidentals.

suspended floor, roofs landing and their support balconies,beams, girders, bressumer and cantiliver upto all floor level including carriage of materials with in all leads and lifts and other incidentals charges.

In columns, pillars, posts and struts square rectangular or polygonal in plain in all floor level.

Stair case (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto all floor level.within all leads and lifts and other incidentials charges.

Providing Tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete in all heights including cost of binding wire and entire carriage of materials within all leads and lifts and other incidentials charges

Providing and laying cement concrete 1:3:6 (One cement: three sand: six graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete but excluding cost of from work in foundation and plinth and super structure including carriage of materials within all leads and lifts and other incidentals.

Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (One cement : two Sand : four graded stone aggregate) 20mm (Twenty millimetre) nominal size to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in Mouldings as in cornices windows sills etc. exceeding 15cm (Fifteen centimetre)in girth including all leads, lifts and carriage of materials as per entire satisfaction of Engineer-in-charge.

Second class brick work using common burnt clay building bricks in super structure in cement mortar 1:6 (One cement : Six sand) Upto all floor level. including carriage of materials within all leads and lifts and other incidentals charges.

Second class half brick masonry common burnt clay building bricks in cement mortar 1:4 (one cement : four sand) above plinth level upto all floor level including entire carriage of material within all leads and lifts and other incidentals.

Providing wood work in frames of doors windowes clerestory window and other frames wrought framed and fixed in position 2nd class deodar wood including curing complete and carriage of materials within all leads and lifts and other incidentals .

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws.40mm ( Forty milimetre) thick 2nd class deodar wood including curing complete and carriage of materials within all leads and lifts and other incidentals .

Providing and fixing 40mm (forty milimetres ) thick 2nd class ( Second class ) deodar wood wire guage shutters using galvenised M.S wire guage I.S guage designation 85G with wire of dia 0.56mm ( zero point fifty six milimetres ) for doors windows and clerestory window including bright finished black enamelled iron hinges with necessary screws including carriage of materials within all leads and lifts and other incidentials charges.

Providing and fixing Mild steel plain grills of required pattern in wooden/steel frames of window etc, with M.S. flats square or round bars with round headed bolts and nuts or by including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of material within all leads and lifts and other incidentials. 250x16mm( two hundred fifty into sixteen millimetre) size.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc complete including carriage of material within all leads and lifts and other incidentals. 150x10mm (one hundred into ten millimetre) size within all leads and lifts and other incidentals in all floor levels as per the direction of the Engineer-in-charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete including carriage of material within all leads and lifts and other incidentals. 125mm (one hundred twenty five millimetre) size.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete making good the floors within all leads and lifts and as per the direction of Engineer-In-Charge

Providing and fixing 19mm thick(Nineteen millimetre)Commercial Board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc complete within all leads and lifts and as per the direction of Engineer-In-Charge

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etcetra complete including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) within all leads and lifts and as per the direction of Engineer-In-Charge

P/F 12 mm (Twelve millimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (Forty millimetre) thick frame. within all leads and lifts and as per the direction of Engineer-In-Charge

Providing and fixing factory madePVC door frame single rebate of any clours of size 50x47mm (Fifty into forty seven millimetre) with a wall thickness of 5mm made out of extruded 5mm (Five millimetre) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. of 150mm (One hundred fifty millimetre) long brackets of 15mmx15mm (Fifteen into fifteen millimetre) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (Nineteen into nineteen millimetre) M.S. square tube of 19 gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100mm(One hundred millimetre) long with wooden or rawl plugs emedded in masonry complete as per manufactures specification & direction of Engineer-in-Charge.

Providing and fixing to existing door frames, 30mm (Thirty millimetre)thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x19mm (Nineteen into nineteen millimetre)for styles and 15mmx15mm (Fifteen into fifteen millimetre) for top & bottom rails M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm(Thirty millimetre) thickness 70mm width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre)shall be tappred in 45 (Forty five ) degree angle on either side forming style and 5mm (Fivemillimetre) thick,95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm(Twenty miillimetre) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm(One hundred fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm(Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be 10mm (Ten millimetre)thick, 20mm(Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S frame welded/sealed to the style & rails, joints mitred and jointed with PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into one point nine zero millimetre) size with necessary screws etc complete.within all leads and lifts and other incidentals as per the direction of the Engineer-in-charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm (Nineteen into six millimetre) section including mitring at junctions with wood screws and nails complete 1st class Indian teak wood. with in all leads and lifts and other incidentals as per the direction of the Engineer-in-charge.

Providing and fixing 75mm x60mm (Seventy five into sixty millimetre) moulded hand rails in straight length complete in ist class Teak wood with in all leads and lifts and other incidentals as per the direction of the Engineer-in-charge.

Kota stone slab flooring 20 mm (Twenty millimetre) (average) thick base of cement mortor 1:4 (One cement :Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete 25 mm (Twenty five millimetre) thick up to fllor all level within all leads and lifts and other incidentals as per the direction of the Engineer-in-charge.

Kota stone slab 25 mm(Twenty five millimetre) thick in risers of steps,skirting dado and pillars laid on 12 mm (Twelve millimetre) (average) thick cement mortar 1:3 (One cement :three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete up to fllor all level within all leads and lifts and other incidentals as per the direction of the Engineer-in-charge.

Precast terrazzo tiles hydraulic compressed 20 mm (Twenty millimetre) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (Twenty five millimetre)average thickness of cement mortar 1:6 (One cement :six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of following shades up to floor all level including carriage of material within all leads, lifts and other incidentals.

Precast terrazzo tiles hydraulic compressed 20 mm(Twenty millimetre) thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm (Thirty centimetre) in height on 10 mm (Ten millimetre) thick cement plaster 1:3 (One cement: three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of following shades.:-Medium including carriage of material within all leads, lifts and other incidentals.

Providing and laying double charged vetrified tiles (600x600mmx10mm)( Six hundred into six hundred into ten millimetre in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. within all leads and lifts and other incidentals as per the direction of the Engineer-in-charge.

Providing and laying Duro stone vetrified tiles (600x600mmx10mm)( Six hundred into six hundred into ten millimetre) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm( Twelve millimetre) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. within all leads and lifts and other incidentals as per the direction of the Engineer-in-charge.

Providing and laying marble work (table rubbed and polished) in flooring 20mm.(Twenty millimetre) thick base in cement mortar 1:3(One cement: three sand) including jointing with cement mortar 1:2(One white cement: two marble dust)with an admixure of pigment to match the shade of the marble. 20 mm(Twenty millimetre).thick white makrana marble up to floor all level including carriage of material within all leads, lifts and other incidentals.

Providing and fixing black cuddapa stone slab 20mm(Twenty millimetre) thick 10 cm ( Ten centimetre) wide in flooring on 20mm (Twenty millimetre)thick base of cement mortar 1:4 (One cement : Four sand) including jointing with grey cement slurry mixed with pigment to match the shade of stone including rubbing and polishing complete up to floor all level including carriage of material within all leads, lifts and other incidentals.

Providing and laying spartic ceremic tiles 5.5mm (Five point five millimetre).thick in flooring (300 x300mm. size)(Three hundred into three hundred millimetre) treads of steps laid on a bed of 12mm.( Twelve millimetre) thick cement mortar 1:3(One cement: tthree sand) finished with flush pointing in white cement. including carriage of material within all leads, lifts and other incidentals.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimetre) thick average thickness of cement mortar 1:4 (One cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm (Sixty millimetre) thick inter locking blocksthick block including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 0.60mm ( Zero point sixty milimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified poliyster (RNP) organic coating of 20 (twenty ) microns over 5 ( five ) microns primer coating to black coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six milimetres ) with prepainted G.I limpet and bitumen washers complete with all accesories as required as per direction of Engineer in Charge.

Providing and fixing ridges or hips overall 60 cm (sixty centimetre) with 0.60mm (zero decimal six zero millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) micron over 5 (five) micron primer coating to black coat of polyster of 5 (five)microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction and entire satisfaction of the Engineer-in-charge.

Providing and fixing valley overall 60 cm (sixty centimetre ) with 0.60mm (zero decimal six zero millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) micron over 5 (five) micron primer coating to black coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction and entire satisfaction of the Engineer-in-charge.

Providing and fixing 0.63mm (zero point six three millimetre) thick, 15cm. (fifteen centimetre) wide, 45cm. (forty five centimetre) overall semicircular plain galvanised iron sheet gutter with iron brackets 40x3mm (forty into three millimetre) size bolts and nuts and washers etcetra including making necessary connections with rain water pipe complete as per design and including carriage of material within all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete upto any height including entire carriage of material within all lead, lifts and other incidentals

In Gratings framed guard bars, ladders, railing, brackets and similar works

In trusses and trussed purlins in building

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentials charges.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping with ready mixed paint other than white including carriage of materials within all leads and lifts and other incidentials charges.

6mm (six millimetre) cement plaster to ceiling with cement mortar 1:3 (one cement : three sand) and curing complete including carriage of material within all leads and lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) upto any floor level including carriage of materials within all leads and lifts and other incidentals.

15mm (fifteen millimeter) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 ( One cement : six sand) including carriage of material within all leads, lifts and other incidentals.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on un-decorated wall surfaces (Two coats ) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials within all leads and lifts and other incidentals .

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface.carriage of materials within all leads and lifts and other incidentials charges.

Distempering ( two coats) with dry distemper of approved brand and manufacture of required shade on undectoraed wall surface to given an even shade over and including priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface from mortar dropping and other foreign matter including preparing the surface even and sand papered smooth with primer coat / distemper primer including carriage of materials within all leads and lifts and other incidentials charges.

Random rubble masonry/polygonal rubble masonry (un-coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement: six sand : Twelve graded/crushed stone aggregate 40mm (Forty millimetre) nominal size at plinth level in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts and other incidentials charges.

Second class half brick masonry common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) above plinth level upto all floor level including entire carriage of material within all leads and lifts and other incidentals.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (One cement: four sand: eight graded crushed stone aggregate 40mm (forty millimetre) nominal size and curing complete but excluding cost of from work in foundation and plinth including carriage of materials within all leads and lifts and other incidentals.

15mm (fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetres) in girth and finished even and smooth in cement mortar 1:3 (one cement : three sand) including carriage of material within all leads and lifts and other incidentals.

Filling in plinth with approved sand under floors and plinth including watering, ramming, consolidating and dressing complete including entire carriage of material in all leads and lifts as per the direction of the Engineer-in-charge.

Boulder filling dry hand tightly under floor including entire carriage of material within all leads and lifts and other incidentals.

Cement concrete flooring 1:2:4 (One cement : two sand: four graded stone aggregate 20 mm (Twenty millimetre)nominal size laid in one layer finished with a floating coat of neat Cement. 50mm (Fifty millimetre) thick.including entire carriage of material in all leads and lifts as per the direction of the Engineer-in-charge.

Suppliying cast iron cover without frame for manholes.For frame of 500mm( five hundred) internal diameter C.I. cover (medium duty) the weight of cover to be not less than 58kg (fifty five Kilogramme)including carriage of material within all leads, lifts and other incidentals.

Providing and laying cement concrete 1:1.5:3 (One cement :One point five Sand : three graded stone aggregate) 20 mm (Twenty millimetre) nominal size and curing complete excluding cost of form work.Walls including attached buttresses, pilasters and their caps and bases string courses etc. upto floor all level.including entire carriage of material in all leads and lifts as per the direction of the Engineer-in-charge.

10mm(Ten millimetre) cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (Eighty millimetre in girth and finished even and smooth. including entire carriage of material in all leads and lifts as per the direction of the Engineer-in-charge.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately including entire carriage of material in all leads and lifts as per the direction of the Engineer-in-charge.

40mm (Forty millimetre)nominal bore

Providing and fixing switch board and fittings including wire 2 mm (Two millimetre) thick as per site requirement including fitting at site.

Providing and fixing Two Horse power Motor for lifting water 1st quality including fittings

Providing amd fixing cast iron ring 200mm (Two hundred millimetre) in 12mm dia ( Twelve millimetre diametre) steel

Providing and fixing 100mm (one hundred millimetre) diametre nominal size cast iron cowl of approved quality including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing sand cast / cast iron supun spigot and socket soil, waste and ventilating pipes (Lead chaulked joints to be measured and paid for separately including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge .

110mm. ( one hundred ten milimetre ) nominal size

Providing and fixing 1.00mm (One point zero millimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete within all leads and lifts and other incidentials charges.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of workingpressure not less than 4.5 kg(four point five kilogram) /sqm including filling the joints withapproved adhesive complete150mm dia pipes with in all leads lifts and carriege of Material as per direction of Engineer in Charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend with in all leads lifts and carriege of Material as per direction of Engineer in Charge.

Plain bend150mm.( One hundred and fifty millimetre)

PVC Shoe 150mm.( One hundred and fifty millimetre)

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etcetra complete. with in all leads lifts and carriege of material and as per direction of Engineer in Charge.

150mm dia (One hundred fifty millimetre)

Providing and fixing angle iron cup board frames manufactured from M.S. angle iron section 25x25x5mm (Twenty into twenty into five millimetre) thickness including hinges jamb, lock jamb , beed and if required angle thrashold of mild steel angle 25x25mm(Twenty into twenty millimetre) welded or rigidly fixed by mechanical means , lugs with split end tails to each jamb including steel butt hinges 2.5mm ( Two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge including entire carriage of material in all leads and lifts as per the the direction of Enigneer-in-Charge.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) thick cement concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate) 40mm (forty millimetre) nominal size and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20 mm (twenty millimetre) nominal size and finished with a floating coat of neat cement complete as per standard drawing/design including carriage of material within all leads, lifts and other incidentals.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) including carriage of materials within all leads and lifts and other incidentials charges.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground and carriage of materials within all leads and lifts and other incidentials charges.

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or / and residual bitumen applied hot at 1.45 kg(One point four five kilogramme) per suare metre of area for each course second course of roofing felt type 3 grade 1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm (Six milimetre) and down size or pea sized gravel spread at 6 cu.dm or 0.006 cu.m) per square metre. including preperation of surface excluding grading complete within all leads and lifts and other incidentials charges.

Extra cost for providing and mixing polyester triangular synthetic fibres in specified ration 6-18mm ( Six to eighteen millimetre) length designed for melting point 240-260 (Two hundred forty- two hundred sixty) degree centigrade and having specific gravity of 1.33-140 as per IS-456 amendment August 2007 & IRC 442008 @ 125 grams/50kg of cement bag in all types of CC, RCC, plastering and flooring work etcetra within all leads and lifts and other incidentials charges

Providing and fixing to wall ceiling and floor 15mm (fifteen millimetre) nominal bore galvanised mild steel tubes (medium grade) of superior quality with tube fittings and clamps including making good the wall, ceiling and floor including entire carriage of material within all leads, lifts and other incidentals.

20mm (Twenty millimetre) nominal bore

Providing and fixing vitreous Orissa Pattern china wash down, water closet squatting pan (Indian type W.C. pan) size 580mm (five hundred eighty milimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing vitreous China wash down, water closet (European type W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (Seat and cover to be measured and paid for separately). within all leads and lifts and other incidentals .

Anglo Indian Universal closet

Providing and fixing PVC made of Finolex 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.110 mm (one hundred ten milimetre) dia.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete.with in all leads and lifts and as per direction of Engineer-in-charge.

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 (Ten litre) litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetre) nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm (Forty millimetre diametre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) .

Providing and fixing plastic seat (solid type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type white plastic seat and cover of commander,Diplomat,Hindware,Admiral,Cera make made including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge

Providing and fixing 550mmx 400mm (five hundred fifty millimetre into four hundred millimetre) size viterous China wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material within all leads, lifts and other incidentals.

Providing and fixing CP brass waste for wash basin or sink 32mm dia (Thirty two millimetre diameter)ncluding carriage of material within all leads, lifts and other incidentals.

providing and fixing M I union for wash basin or sink 32mm dia (Thirty two millimetre diameter)ncluding carriage of material within all leads, lifts and other incidentals.

Providing and fixing C.P. Bottle Trap for wash basin and sink 32mm(Thirty two millimetre diameter)ncluding carriage of material within all leads, lifts and other incidentals.

Providing and fixing PTMT grating round of approved quality and colour 100 mm(One hundred millimetre diametre) nominal dia.including carriage of material within all leads, lifts and other incidentals.

Providing and fixing G.I inlet connection for flush pipe for W.C pan including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 600mm x 450 mm ( Six hundred into four hundred fifty millimetre)bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including carriage of material within all leads, lifts and other incidentals.

Providing and fixing C.P. Brass Towell rail coplete with C.P. Brass brackets fixed to wooden pluges with C.P. Brass screws including carriage of material within all leads, lifts and other incidentals.

600mm x 20mmm (Six hundred into twenty millimetre)

Providing and fixing 600mm X 120mm (Six hundred into one hundred twenty millimetre) glass shelf with CP brass bracket and guard rail complete fixed to wooden plug with CP brass screws. including carriage of material within all leads, lifts and other incidentals.

Providing and fixing toilet paper holder CP brass including carriage of material within all leads, lifts and other incidentals.

Providing and fixing Choromium plated brass soap dish with CP brass brakckets fixed to wooden cleats with CP brass screws. including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) diametre chromium plated brass bib tap with capstan head of superior quality including carriage of material within all leads, lifts and other incidentals.

Providing and fixing15mm (fifteen millimetre) C.P Brass pillar tap with Capstan head of superior quality including carriage of material within all leads, lifts and other incidentals

Providing and fixing 15mm (fifteen millimetre) diametre Chromium plated stop cock of superior quality including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) nominal bore and 45 (forty five) centimetre long chromium plated connection pipe of approved quality with brass unions including carriage of material within all leads, lifts and other incidentals.

Providing and fixing G.I./M.I Union of following sizes (where not included in the items) .including carriage of material within all leads, lifts and other incidentals.

15mm (Fifteen millimetre diameter)

20 mm (Twenty( millimetre diameter)

Providing and fixing 1000 (one thousand litre) net capacity PVC water storage tank of ISI 12701 marked, galvanised iron inlet and outlet connection,15mm (fifteen milimetre) nominal bore ball valve and mosquito proof PVC coverwith locking arrangement including hoisting upto all heights above ground level including all leads, lifts and carriage of materials as per entire satisfaction of Engineer-in-charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. with in all leads and lifts and as per direction of Engineer-in-charge.

150 mm dia. (One hundred fifty millimetre diameter)

110 mm dia. (One hundred millimetre diameter)

75 mm dia. (Seventy five millimetre diameter)

Providing and fixing 110 mm dia (one hundred ten milimetre) PVC door bend with oval access door made of Finolex insertion rubber washer 3 (three) millimetre thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage with in all leads and lifts and and as per direction of Engineer-in-charge.

Providing and fixing 75mm (Seventy five millimetres) nominal size PVC single equal branch plain including fixing with approved adhesive etcetera complete including entire carriage of material with in all leads and lifts and and the direction of Engineer-in-Charge

Providing and fixing PVC collar complete PVC Finolex including fixing with approved adhesive etcetera complete upto all floor level complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge

110 mm (one hundred ten millimetres diametre)

75 mm dia (Seventy five millimetre diameter)

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.including carriage of material within all leads, lifts and other incidentals.

110 mm dia.(One hundred ten millimetre diameter)

75 mm dia (Seventy five millimetre diameter)

Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC double equal branch with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing 75mm (Seventy five millimetres) nominal size PVC double equal branch with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. including entire carriage of material with in all leads and lifts and as per the direction of Engineer-in-Charge

110 mm dia. (One hundred ten millimetre diameter)

75 mm dia. (Seventy five millimetre diameter)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260mm x 350 and 340x430x265mm (Four hundred tirty into two hundred sixty into three fifty and three hundred forty into four hundred thirty into two hundred sixty five) millimetre )size, respectively with authomatic flusing cistern with fittings R.S or C.I. Brackets standard size galvansied steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, inciuding painting of cistern and fittings, cutting and making good the walls floors where required including entire carriage of material with in all leads and lifts and as per the direction of Engineer-in-Charge

one urinal basin with 5(Five) litres C.I. automatic flushing cistern

Providing and fixing division plate for Urinal 600mmx300mm (six hundred into three hundred milimeters) viterous China of ( Hindware/Parryware /CERA, Sanitary ware,Naycer make ) (Starwhite colour)including entire carriage of material with in all leads and lifts and as per the direction of Engineer-in-Charge

Providing and fixing brass full way valve with including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge .

20mm nominal bore (Twenty millimetre bore)

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting with in all leads and lifts and as per the direction of Engineer-in-Charge

P.V.C. waste pipe flexible (Coil type) length not less that 800 mm(Eight hundred millimetre).with in all leads and lifts and as per the direction of Engineer-in-Charge

32 mm dia.(Thirty millimetre diametre)

Providing and fixing jet with 1.50 mtr. ( one point five metre ) long flexible tube 8mm (eight milimetre ) dia chrom finish with wall hook complete hard shower ( Health faucet ) ALD-597 of Jaguar its equivalent in Hindware/Cera and approved by Engineer-in-Charge including entire carriage of material with in all leads and lifts and and the direction of Engineer-in-Charge

Constructing manhole with R.C.C top slab in 1:2:4 mix in one cement : two sand : four graded stone aggregate) 20mm nominal size( Twenty millimetre) foundation concrete1:4:8 (One cement : four sand : eight graded stone aggregate) 40mm (Forty millimetre) nominal size inside plastering 15mm(Fifteen millimetre) thick with cement mortar 1:3 (One cement :three sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (One cement : two sand : four graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing with in all leads and lifts and and the direction of Engineer-in-Charge

Inside size 800 mm x 800 mm and 1000 mm (Eight hundred into one thousand millimetre) deep including C.I cover with frame.(Light duty single seal pattern - 1) 455mmx610mm ( Four hundred into six hundred ten millimetre)internal dimensions total weight of cover and frame to be not less than 38kg(Thirty eight kilogramme). (Weight of cover 23 kg )(Twenty three kilogramme)

With 200mm(Two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (One cement : three sand)

Ankush Kaundal

Jay Kumar

Sohan lal