DEPOSIT

Amount

Working Charges

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

OD112199/2024-2025:Divers engaged for removing plastic and bio waste from river bed

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

OD112200/2024-2025:Trenching the river bed in liquid mud and ordinary soil for laying H D P E pipes upto a depth of 1.5M below water level using diving set and air compressor or using any other scientific method stocking the excavated soil at convenient place and refilling the trenches

100.98.1008:Engaging Coolie.

100.98.1009:Engaging Fitter ( grade 1).

OD112201/2024-2025:Hire for second class boat with boat man

OD212736/2024-2025:Casting RCC Sleeves using 1:1.5:3 mm cement concrete Sleeve with ID 200 mm Outer dia 400 mm length 200 mm

OD214519/2024-2025:Conveying and fixing 160 mm HDPE electro fusion coupler for jointing 160mm HDPE pipe & specials by aligning the pipe in position, inserting the coupler, jointing the coupler with pipe by using electrofusion machine, including hire charges for electrofusion machine, electricity charges, etc. completed.

OD112203/2024-2025:Conveying and laying 160 mm HDPE pipe in position by plotting the pipe in water, fixing RCC sleeves or anchor blocks with bolt and nut or plastic rope as per the direction by using country boat or engine driven boat, aligning the pipe line , lowering the pipe line in position into the trenches already made in the river bed and back filling and leveling the trenches including the cost of all labour charges, hire for appliances etc. complete.

100.10.5:Laying HDPE pipes (IS : 4984) on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi-automatic electrofusion machines, testing the pipeline thus fabricated to suit the hydraulic working pressure and after testing, aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and levelling the trenches including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 160mm Nominal Outside Diameter Pipes.

OD214677/2024-2025:Providing flanged joints to HDPE pipes and specials, including testing of joints: 160 mm diameter pipe

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Cost of Materials

100.98.158:Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 160mm Outer Dia.

OD212775/2024-2025:Supply of 160 mm OD HDPE electrofusion coupler

OD214557/2024-2025:Supply of 160 mm OD HDPE stub end

100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

Arun (BID ID -2436365)

Bidder Name

udayakumar