“General Civil Maintenance of 9 nos. of Metro Stations (i.e. Koteshwar Station, Vishwakarma Station, Tapovan Circle Station, Narmada Canal Station, Koba Circle Station, Juna Koba, Koba Gam, Sachivalaya & Sector-10 including Viaduct from Koteshwar Station to GNLU Station and Viaduct of Sector -1 Station to Sachivalaya Station of Ahmedabad Metro Rail Project Phase-2”

BILL OF QUANTITIES

1.0 The Bill Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers,

Special Conditions of contract, Scope of Work, Technical Specifications etc.

2.0 Schedule ‘A’ consists of DSR items for Civil works as detailed in Tender documents. Tenderer has to quote

percentage above/below/at par the rates against BOQ amount given in Schedule ‘A’.

3.0 Schedule ‘B’ consists of Non DSR items for Civil works as detailed in Tender documents. Tenderer has to

quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘B’

4.0 The rates and prices to be tendered in the unit Priced Bill of Quantities of Schedule ‘A’, ‘B’ are for completed

and finished items of works and complete in all respect. It will be deemed to include cost of all plants,

labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification,

contractor’s profit, taxes and establishment/overheads, together with preparation of design and drawings,

all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the

5.0 The Summary Sheet of Bill of Quantity is given in Annexure – 1. The bidder may note that the quote shall

be inclusive of all taxes. The tax bifurcations is to be given in Annexure – 2 of the BOQ.

6.0 If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-

responsive and shall be rejected.

7.0 Tenderers shall quote their offer in Indian Rupees (Rs.) only. Tenderers are required to quote percentage

(%) above/below/at par in figures in the appropriate highlighted cell in the summary sheet.

8.0 Errors will be corrected by the employer for any arithmetical errors in computation or summation as per

contract conditions.

9.0 All the unit rates/ percentages should be filled in figures. In case of any discrepancy, the value provided in

words shall be treated as sacrosanct.

10.0 The work executed against all the BOQ items in Schedule ‘A’ & ‘B’ as detailed in tender document would be

paid on measurement basis.

11.0 The contractor may raise their “On Account” payments on monthly basis as per the status of work on the

last day of the respective month.

12.0 In case of Schedule A item the description is given in brief and detailed description of item should be as

given in respective i.e., DSR.

13.0 The financial bid is to be submitted online on https://tender.nprocure.com. The other relevant clauses of

submission of bid is clarified in ITT, Para / Clause D1 to D11

GMRCL Page 2 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

FINANCIAL BID FORM

To : The Managing Director,

Gujarat Metro Rail Corporation (GMRC) Limited

Address : Block No.1, First Floor, Karmayogi Bhavan, Behind Nirman Bhavan,

Sector 10/A, Gandhinagar: 382010, Gujarat, India

Name of Work: “General Civil Maintenance of 9 nos. of Metro Stations (i.e. Koteshwar

Station, Vishwakarma Station, Tapovan Circle Station, Narmada Canal Station, Koba Circle

Station, Juna Koba, Koba Gam, Sachivalaya & Sector-10 including Viaduct from Koteshwar

Station to GNLU Station and Viaduct of Sector -1 Station to Sachivalaya Station of

Ahmedabad Metro Rail Project Phase-2.”

1. Having examined the site of works and Bid Documents, comprising Instructions to Bidders, Scope of

works, Conditions of Contract, Technical Specifications, Bill of Quantities I/we, the undersigned offer to

execute and complete such works and remedy any defects therein in conformity with the said bid

documents for the sum of Rs. (Refer Annexure – 1) or such other sum as may be ascertained in

accordance with the said Bid documents.

2. We undertake, if our Bid is accepted, to commence the work from issuance of LOA / receipt of the order

to commence the work, and to complete and deliver the sections and whole of the works comprised in

the Contract within the period (i.e. 24 Months) stated in the bid hereto.

3. If our Bid is accepted, we will furnish Performance Security (ies) in the form of a Bank Guarantee to be

jointly and severally bound on us, in accordance with the Conditions of Contract.

4. We agree to abide by this Bid for the period of One Hundred & eighty (180) days from the last date

fixed for Bid Submission and it shall remain binding upon us and may be accepted at any time before

the expiry of that period.

5. We confirm our agreement to treat the Bid documents and other records connected with the works as

secret and confidential documents and shall not communicate information contained therein to any

person other than the person authorised by the Employer or use such information in any manner

prejudicial to the safety and integrity of the works.

6. Unless and until an agreement is prepared and executed, this Bid, together with your written

acceptance thereof, shall constitute a binding Contract between us, but without prejudice to your right

to withdraw such acceptance without assigning any reasons thereof.

7. We understand that you are not bound to accept the lowest or any bid you may receive.

We attach herewith proof of submission of income tax returns along with profit & loss statement attached

with tax returns.

Yours faithfully,

Authorized Signature :

GMRCL Page 3 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Tender Notice No.: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026

“General Civil Maintenance of 9 nos. of Metro Stations (i.e. Koteshwar Station,

Vishwakarma Station, Tapovan Circle Station, Narmada Canal Station, Koba

Name of Works Circle Station, Juna Koba, Koba Gam, Sachivalaya & Sector-10 including Viaduct

from Koteshwar Station to GNLU Station and Viaduct of Sector -1 Station to

Sachivalaya Station of Ahmedabad Metro Rail Project Phase-2.”

Annexure – 1 (i.e. Summary Sheet of Bill of Quantity)

Rate to be Quoted by the Tenderer

Sr. No Schedule

(in Rs.) In Figures In Words

(% above/below) (% above/below)

Schedule - A ……………………………………

(Non DSR Items) ..

Total Amount (INR) In

Total Amount (INR) In

(Inclusive of all taxes)

1.0 The tenderer shall quote a single percentage (Above/Below/At Par) at Sr. No. 1 & 2 of this Summary Sheet only and nowhere e

2.0 The bidder’s quote to be filled in Annexure – 1 (i.e. Summary Sheet of Bill of Quantity), it should be inclusive of all

3.0. The tax bifurcations to be filled in Annexure – 2 (i.e. Details of Taxes and Duties).

GMRCL Page 4 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

“General Civil Maintenance of 9 nos. of Metro Stations (i.e. Koteshwar Station,

Vishwakarma Station, Tapovan Circle Station, Narmada Canal Station, Koba Circle Station,

Juna Koba, Koba Gam, Sachivalaya & Sector-10 including Viaduct from Koteshwar Station

to GNLU Station and Viaduct of Sector -1 Station to Sachivalaya Station of Ahmedabad

Metro Rail Project Phase-2.”

Summary of BOQ – Phase - II

Sr. No. Schedule Amount

Schedule A - Provisional sum for item not covered under the

schedule of items in this BOQ.

All item of work which are not covered in BOQ but are required to

be carried out as per direction of Engineer, will be based on list of

concerned items as available in DSR-2023 of CPWD.

i. Schedule of Rates DSR -2023 CPWD

ii. Schedule of Rates of SCHEDULE OF RATES FOR BUILDING WORKS

AHMEDABAD CITY (AMC) YEAR: 2023-24 issued by GOVERNMENT

A OF GUJARAT ROAD AND BUILDING DEPARTMENT ₹

iii. SCHEDULE OF RATES FOR BUILDINGS, ROADS & BRIDGES WORKS

OF GANDHINAGAR DISTRICT for the year 2023-24 of Road &

Building (R&B) Department of Government of Gujarat.

iv. Delhi Schedule of Rates (E&M)

v. Delhi Schedule of Rates (mechanical)

Note: The order of preference for adopting the Rates will be in

accordance with as first preference being at (i) and the last

preference being at (iii) above, till the availability of concerned

items in the respective schedule of Rates.

1 Sub-Schedule-B.1 (False Ceiling/Roofing/Flooring/Stone

2 Sub-Schedule-B.2(Toilet/Washroom)

3 Sub-Schedule-B.3(Door lock, windows, Railing, metal)

4 Sub-Schedule-B.4 (PHE)

5 Sub-Schedule-B.5(Sheet work & Rolling shutter)

6 Sub-Schedule-B.6 (Carriage/Disposal)

7 Sub-Schedule-B.7 (PCC/RCC/Waterproofing)

8 Sub-Schedule-B.8(Glass Work)

9 Sub-Schedule-B.9(Signage)

B Total Amount for Schedule B ₹

B Total Amount for Schedule B ₹

Total amount in Rs. (Including GST) ₹

Total amount in Rs. (Including GST) ₹

GMRCL Page 5 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

Schedule B-Non-DSR-Building Works

Sub-Schedule-B.1 (False Ceiling/Roofing/Flooring/Stone work/Cladding)

Providing and fixing PVC Printed pain colour false ceiling with grid type with aluminium

frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used as panel insert in a

frame work made using anodized aluminium T section of size 1 x 1 (235 x 25mm, 19 gauge

or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) The aluminium frame

1 NDSR-1 Sq. m.

work is supported from the ceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods

of required sizes to maintain proper level etc. The aluminium frame work is supported on

side wall with the use of aluminium L section of size 1 x 1 (25 x 25mm) angles etc. complete

as per direction of Engineer in charge. Manufactures specification and drawing.

Providing and fixing (approved make) 12 mm thick Cement fibre board cladding fixed both

side on Aluminium / MS pipe frame for bulkhead as per approved architectural drawings.

The frame is 100 x 100 x 6 mm Sq. Pipe fixed with vertiges @ 1.2 m/c and fastener to fix

2 NDSR-2 Sq. m.

bulkhead on aluminium box section, aluminium beading etc. The rates shall include all

necessary materials, labour, tools & plants as per instruction of Engineer-in-charge Note:

Nothing extra shall be paid against these items.

Providing and installing in position as per approved sample reflected ceilings plans

1200x600 perforated metal panel ceilings demountable tray type made up of minimum

1mm thick manufactured from GI corrosion resistant steel/matt lyreal coated sheets/foils.

The pitch and dia of perforations shall be as per approved design. The tiles shall be laid

down on a suitable grid system made up of minimum 1.5mm thick roll formed galvanised

steel sections with suitable suspension system with hangers placed at a maximum distance

of 2400mm centre to centre. The ceiling system shall be powder coated to approved shade

3 NDSR-3 Sq. m.

& colour with a minimum thickness of 55 microns. On the top of the ceiling panel shall be

lined with factory fitted non-woven acoustic felt of soundex or equivalent make, with a

NRC value of 0.70. The ceiling system shall have provision of fixing lights, diffusers,

speakers as per systems contractor requirements. The ceiling system shall have an easy

mechanism of removing the tiles for inspection and access of the services above. provision

of special access panels to be made where marked on the drawings. All the suspension

system and substructure cost is included in the item.

Providing & fixing in position plain cement concrete of mix 1:2:4, with 20mm and down

size gladded granite metal coarse aggregate. Concrete laid in layers not exceeding 15cm

thick well compacted, including cost of chipping & levelling off the floor as required all

4 NDSR-4 Cu. m.

leads & lifts, staging materials, labour, hiring of machines (HOM) curing etc., all complete

as per drawing, specification and as directed by engineer 1:2:4 (1 cement: 2 coarse sand:

4 graded stone aggregate 20 mm nominal size)

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

5 NDSR-5 Sq. m.

hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening

compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications.

This includes cost of cement slurry, but excluding the cost of Nos.ing of steps etc. complete

Providing and fixing removable raised/ false access flooring with system and its

components of approved make for different plenum height with possible height

adjustment upto 50mm, comprising of modular load bearing floor panels supported on G.I.

rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural

drawings, as specified and as directed by Engineer-in-charge consisting of:a) Providing at

required spacing to form modular frame work, pedestals made out of GI tube of thickness

6 NDSR-6 Sq. m.

minimum 2 mm and 25mm outer diameter, fully welded on to the G.I. Base plate of size

100mm X 100mm X 3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mm x 75mm x 3.5mm welded with GI fully threaded stud 16mm outer diameter with

two Gi check nuts screwed on the stud for level adjustment upto 50mm, locking and

stabilizing the pedestal head in position at the required level. The pedestals shall be fixed

to the subfloor (base) through base plate using epoxy based adhesive of approved make

GMRCL Page 6 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

or the machine screw with rawl plug.b) Stringers system in all steel construction hot dipped

galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for

securing the stringers on to the pedestals head using fully threaded screws ensuring

maximum lateral stability in all directions, the grid formed by the pedestal dns stringer

assembly shall receive the floor panel, this system shall provide adequate solid, rigid

support for access floor panel, the system shall provide a minimum clear uninterrupted

clearance between the bottom of the floor for electrical conduits and wiring etc. all

complete as per the architectural drawings, as specified and as directed by the Engineer-

in-charge.c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade

Filled steel anti-static high pressure Lamination of 800H grade (FS800H). Access Floor panel

shall be steel welded construction with an enclosed bottom pan with uniform pattern of

64 hemispherical cones. The top and bottom plates of steel Gauges: top 0.6mm and

bottom 0.7mm fused spot welded together (minimum 64 welds in each dome and 20 welds

along each flange). The panel should be Corroresist epoxy coated for lifetime rust

protection and cavity formed by the top and bottom plate is filled with Pyro grip non-

combustible Portland cementitious core mixed with lightweight floaming compound. The

access floor shall be factory finished with Anti-static High-Pressure laminate with non-warp

technology upto 1mm thickness for superior adhesion and Surface flatness within 075mm.

The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm X 25mm

without collapse in the panel which is placed on four steel blocks. The panel will withstand

and Uniformly Distributed Load (UDL) minimum 1500 kg/Sq. m. and an impact load of 50kg

all complete as per the approved manufacturers specification and as per the direction of

Engineer-in-charge. All specification must be printed on the side of the panel to ensure the

quality of the product.450 mm Finished Floor Height (FFH)

Providing and laying vitrified floor tiles of light and dark shades, in different sizes (thickness

to be specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick

7 NDSR-7 cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints (paper joints) Sq. m.

with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Laser

machines shall be used for cutting tiles for cut / corner tiles and the cut edges shall be

grounded smooth to obtain straight and hairline joints.

Providing & fixing polished granite coping in approved shade (Dark coloured granite-D

black, Kharda red or equivalent), bill -Nos.ed over 20mm thick cement mortar

8 NDSR-8 1:4(1cement:4course sand) bed joint treated with white cement mixed with matching Sq. m.

pigment including rubbing, curing, moulding & polishing to edge to edge to give high gloss

finish etc. complete 30 mm thick

Providing skirting upto 300 mm, height with cement mortar 1:3 finished with a floating

coat of neat cement, including rounding off junction’s floor, overall, 18 mm thick including

cost of material, labour, complete as per specification. Including cutting to required shape,

set in 15 mm thick cement mortar 1:3 backing coat or set in special tile adhesive paste as

9 NDSR-9 Sq. m.

per manufacturer's guide lines, finished to proper levels, slopes including neat cement

float, pointed flush in white cement pigmented to match the shade of the tile, etc.

complete all as directed by Engineer. (The edges shall be ground with laser cut to give

smooth and straight edges such as to obtain hairline joints.)

Providing and fixing 10 mm thick acid and / or alkali resistant vitrified tiles of approved

make and colour using acid and /or alkali resisting mortar bedding and joints filled with

10 NDSR-10 acid and / or alkali resisting cement as per IS:4457 complete as per the direction of Sq. m.

Engineer-in-charge.

For flooring on a bed upto 30 mm thick mortar 1:4 (1 appropriate cement : 4 coarse sand).

Providing and laying gang saw cut 25mm thick polished granite flooring of size 1200*600

and shape of approved shade,color and texture in flooring stone of required size and shape

11 NDSR-11 of approved shade ,colour and texture in flooring and similar locations laid over 20mm

thick base of cement mortar 1:4(1cement:4coarse sand) including grouting the joints with

white cement mixed with matching pigment, epoxy touch ups,curing,rubbing,mirror

GMRCL Page 7 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

polishing /honing/sand blasting ,washing, cleaning etc. Complete as per direction of the

12 NDSR-12 Polished light-coloured granite stone (jiraval white, P white, crystal yellow or equivalent) Sq. m.

13 NDSR-13 Polished dark coloured granite stone (D black, Kharda red or equivalent0 Sq. m.

Providing and laying in position on floor ,skirting and in bands vitrified monolithic

homogeneous unglazed anti-skid/Uni colour series floor tiles 300x300x7.3mm thick of

approved make, specification and colours like terracota,polo,mushroom,nut brown laid

14 NDSR-14 over upto 30mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) to the pattern Sq. m.

as called for including finishing the joints with matching pigment and approved grouting

materials, cutting borders, chamfering of edges, marking of tiles shapes on the wall etc.,

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:

of approved make in all colours and shades in for outdoor floors such as footpath, court

15 NDSR-15 Sq. m.

yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement

: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement

mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and fixing yellow warning FRP tile of dimensions 600x100x8mm thick for a width

16 NDSR-16 of 100mm throughout the length of the platform using epoxy tile adhesive material as per Sq. m.

the manufacture specification and the direction of Engineer in charge.

Providing & laying 100mm wide strip of 8mm thick yellow warning strip made of heavy

duty Vitrified ceramic tile on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand),

17 NDSR-17 sprinkled with white cement and jointed with white cement slurry mixed with pigment to Sq. m.

match the shade of the slabs including rubbing and polishing complete. Rates include

coordination with other agencies for cut-outs, holes and finishing of the same.

Providing and laying broken white glazed China mosaic flooring for plain and curved

surfaces on terraces, floors, balconies, roofs etc. comprising of 12mm to 20mm size broken

pieces of ceramic/ glazed tiles, laid over cement mortar 1: 3 bedding on plain or sloped

The Treatment includes preparation of surface as required for water proofing of roofs,

balconies, terraces etc consisting of following operations:

(a) Apply of slurry coat of neat cement using 2.75 kg/Sq. m. of cement admixed with water

proofing compound confirming to IS 2645 and approved by engg. Incharge over the slab

including adjoining walls upto 300mm height including the cleaning the surface before the

(b) Laying brick bats with mortar using broken bricks/ Brick bats 25-115mm size with 50%

cement mortar (1:5) admixed with water proofing compound confirming to IS 2645 and

approved by engg. Incharge over 20mm thick layer of cement mortar of Mix 1:5 admixed

with water proofing compound confirming to IS 2645 to required slope and treating

18 NDSR-18 similarly the adjoining walls upto 300 mm height including rounding of junctions of walls Sq. m.

(c) After 2 days of proper curing applying coat of cement slurry using 2.75kg/Sq. m. of

cement admixed jointless cement mortar of mix 1:4 admixed with water proofing

compound confirming to IS

(d) Providing and laying broken white glazed China mosaic flooring for plain and curved

surfaces on terraces, floors, balconies, roofs etc. comprising of 12mm to 20mm size broken

pieces of ceramic/ glazed tiles, laid over cement mortar 1: 3 bedding on plain or sloped

The flooring shall be tamped to bring the cement mortar cream upto the surface, including

rounding of junctions and extending them upto 30 cm along the parapet. The rate shall

include bands, if different colour is used, any pattern or design as per drawing and

direction, finishing with white cement, curing, cleaning with water and oxalic acid, etc.

complete at all levels, as directed and to satisfaction to the engineer in charge. Rate shall

include all tools, tackles, machines, necessary scaffolding, adding of waterproofing

GMRCL Page 8 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

material as recommended in the bedding mortar by the Engineer in charge.

(e) The Whole terrace so finished shall be flooded with water for a min. period of 2 weeks

for curing and for final testing as per the direction of Engg. Incharge.

Refixing of dry cladding upto 10 metre heights with 300mm thick gang saw cut stone with

(machine cut edges) of uniform colour and size upto 1m x 1m, fixed to structural steel

19 NDSR-19 frame work and/or with the help of cramps, pins etc. and sealing the joints with approved Sq. m.

weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The

steel frame work, stainless steel cramps and pins etc. shall be paid for separately).

Refixing of old 30 mm thick granite stone of required size and shape of approved shade,

colour and texture in footpath, flooring in road side plazas and similar locations, laid over

20 NDSR-20 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the Sq. m.

joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as

per direction of Engineer-in-charge.

Providing and fixing access floor panel of 600*600*32 mm medium grade filled steel anti-

21 NDSR-21 Each

static high-pressure lamination of 800IL grade (FS80011)

Replacing existing floor tiles/granite including cutting existing fixed tile/granite,

dismantling tile/granite, removing all debris, cleaning and fixing new tile/granite using

22 NDSR-22 suitable adhesive of Laticrete or approved equivalent, all complete as per direction and Sq. m.

satisfaction of Engineer-in- Charge. (This item does not include cost of Tile/Granite which

shall be paid extra)

Sub-Schedule-B.2(Toilet/Washroom)

Providing and fixing in position GI Gutter of 2mm thick sheet of approved quality including

fabrication and erection with self-tapping screws epdm washers with necessary laps and

23 NDSR-23 stiffeners, application of sealant, making provision for drainage spout with all leads and Sq. m.

lifts etc. Complete as per drawing and specifications. (Measurement to be as per profile

Providing and fixing white vitreous China pedestal type water closet (European type )with

seat and lid, 10 litre low white various China flushing system & C.P flush bend with fittings

24 NDSR-24 & C.I Basets, 40mm flush bend, overflow arrangement with special of standard make and Nos.

mosquito proof coupling of approved municipal design complete , including painting of

fittings and brackets, cutting and making good the walls and floors wherever required.

25 NDSR-25 Providing and fixing full Urinal (Make - Hindware) Cat. no. 60010 Each

Providing and fixing wash basin with C I brackets, 15 mm C. P. brass pillar taps, 32mm C.P.

brass waste of standers pattern including painting of fittings and brackets, cutting and

26 NDSR-26 Nos.

making good the walls wherever require. White Vitreous China wash basin size 630x450

mm with a pair of 15mm Cc.P brass pillar taps

Providing and fixing mirror of superior glass (of approved quality) and of required shape

and size with plastic moulded frame of approved make and shade with 6mm thick hard

27 NDSR-27 Nos.

board backing. Rectangular shape.

Providing and fixing mirror of superior glass (of approved quality) and of required shape

and size with plastic moulded frame of approved make and shade with 6mm thick hard

28 NDSR-28 Nos.

board backing. Rectangular shape.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with

C.P brass with conceal fittings arrangements of approved quality and colour. 600 mm long

29 NDSR-29 Nos.

towel rail with total length of 645 mm width 78 mm and effective height of 88 mm weighing

note less than 190 gms.

Providing and fixing vitreous toilet paper holder of vitr with mortar / white cement with all

30 NDSR-30 Nos.

fittings and fastenings all complete as required

Providing and fixing of bib cock with health faucet with flexible pipe of appropriate length

31 NDSR-31 with a separate stop cock for the health faucet. The cost to include all fittings and Nos.

fastenings all complete as required

32 NDSR-32 Providing and fixing of CP grab rail in PWD Toilet. The cost to include all fittings and Nos.

GMRCL Page 9 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

fastenings all complete as required

Providing and fixing Urinal Partition of 20mm thick of approved material granite/plastic as

33 NDSR-33 Nos.

specified. The cost shall include all fittings and fastenings all complete as required

Providing and fixing 32 mm CP brass flush valve concealed or exposed type with isolation

34 NDSR-34 Nos.

valve, CP brass flush bend etc. including all fittings and fastenings all complete as required

Proving fixing white vitreous China oval counter bottom fixed wash basin, installed below

granite / marble counter (or as per architects’ approval) with CI bracket 15mm CP brass

35 NDSR-35 pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and Nos.

brackets cutting and making good of the walls wherever required. Wash basin size

Providing and fixing heavy cast brass C.P coat hooks fixed with rawl plugs with C.P brass

36 NDSR-36 Nos.

screws all complete as required

Providing and fixing automatically operated Hand Dryer with in-built heating unit and twin

37 NDSR-37 Nos.

blowers of NovoTech or equivalent make

38 NDSR-38 Providing and fixing Angle Valve (Make - Jaquar) Code: FLR-5053N Each

39 NDSR-39 Providing and fixing Pillar Cock (Make - Jaquar) Code: PRS-031 Each

40 NDSR-40 Providing and fixing of jet spray with flexible tube made of Volga or approved quality. Each

Providing and Fixing of WC seat Cover, complete with all accessories required as per

41 NDSR-41 direction of Engineer-in-charge. Each

CERA make (B1510108) or equivalent

Cleaning of sewer line: Cleaning including Pumping out water from blocked sewer lines or

42 NDSR-42 otherwise by suitable sewerage pump of 5HP all work completed as per direction by RMT

Engineer in charge.

Testing of potable water as per the standard of local (As per IS 10500) water supply

43 NDSR-43 authority (I/c supplying of water sample to the laboratory) and providing the sample test Each

Cleaning of underground water tank of all the sections/Capacity of tank by emptying of

water in other tanks or in a separate storage device to avoid the wastage of water. The

rates are inclusive of all taxes, men, materials, safety equipments and other required

44 NDSR-44 Per Tank

resources. Nothing shall be paid extra and work shall be paid extra and work shall be

carried out as per direction of Engineers in charge. The tank shall be cleaned on half yearly

basis and report shall be submitted to GMRC.

45 NDSR-45 Providing and fixing electronic sensors for flushing in urinals Nos.

Providing and supplying battery box for urinal sensor and repairing the urinal sensor to

46 NDSR-46 Each

working condition all complete as per direction of Engineer-in-Charge.

Providing and fixing AA size cell of DURACELL make in urinals as per direction and

47 NDSR-47 Each

satisfaction of engineer-in-charge

Providing and fixing of CP grab rail in disable toilet. The cost to include all fittings and

48 NDSR-48 Nos.

fastenings all complete as required.

Providing and fixing soap dispenser om masonary/RCC/CC including all fitting and screws

49 NDSR-49 Nos.

including cutting and making good the wall wherever required.

Sub-Schedule-B.3(Door lock, windows, Railing, metal)

Providing and fixing chromium plated brass 100mm mortice latch and lock with 6 levers

and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing Aluminium door stops/wall stoppers to flush doors or panelled solid Each

and glazed doors, etc., complete as per drawings and directions of engineer in charge. Shutter

Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto

52 NDSR-52 Each

36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment

with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less

53 NDSR-53 than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with Each

necessary screws etc. complete:

GMRCL Page 10 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

Size 200 X 10 mm

Providing and fixing 250 mm long two stainless steel handles in a door with all necessary

54 NDSR-54 Per Pair

screws etc complete.

Polishing and buffing of stainless steel 304 railing/ stainless steel surface provided in metro

stations with minor grinding (as required) and removing stains/blemish with proper

rubbing and polishing the surface with suitable material & finally buffing the surface with

55 NDSR-55 Sq. m.

high-speed buffing machine using buffing material as per direction of Engineer-in-charge.

The work will be carried out in non-revenue hours and rates are inclusive of all taxes, man

power, material, tools and plants, CO and OH etc. all complete.

Repairing of existing aluminium door and windows I/c opening the section and refining the

56 NDSR-56 section as per the existing as per direction of Each

57 NDSR-57 250*150 mm vision panel with 6mm thick clear toughened glass Nos.

58 NDSR-58 Clear vision panel of 200mm * 300mm Each

Providing & fixing G.I Hexagonal chicken wire mesh of size 12mm*20-gauge conforming IS:

3150 at the junction of dissimilar surfaces of brick/block masonry wall and RCC column

59 NDSR-59 /beams and the like including necessary "U" nails /screws with cleats for fixing, overlapping Sq. m.

etc. complete all as per specification and as directed by the Engineer for all height and all

Sub-Schedule-B.4 (PHE)

Providing and fixing UPVC soil and waste pipes ISI marked / SWR with solvent cement /

rubber ring joints and further protected with fibreglass paste, including all specials such as

bends, tees, reducers etc with or without door as required, including any cutting and

making good of floors / walls that may be necessary, clamps and stays as per requirements.

The pipes laid above the floor level (sunken level) should be rigidly fixed with PCC bedding

and levelled at every one metre intervals

61 NDSR-60.1 a) 50mm Dia 6 Kg/cm2 RMT

62 NDSR-60.2 b) 75mm Dia 6 Kg/cm2 RMT

63 NDSR-60.3 c) 110mm Dia 6 Kg/cm2 RMT

PVC PIPE 160 MM: Providing and laying 160mm dia & 6kg pressure PVC pipe for drainage,

all work completes as directed by engineer in charge. (make - as per approved list).

Providing and fixing PVC P-trap /multi-trap /Nahani-trap of 110mm dia for kitchen

/bathroom with demolishing of Kota stone/cement concrete flooring of required area or

up to 1.0 Sq. m. for rectification of seepages and repairing the same as above, including

65 NDSR-62 Each

the cost of materials i.e. PVC P-trap/multi-trap/Nahani trap, solvent, piece of PVC pipe,

Kota stone, cement concrete or other materials, labour charges, taxes etc. complete as per

direction of Engineer-in-charge.

Providing and fixing UPVC/CPVC union in CPVC pipeline of approved quality, including

66 NDSR-63 cutting and threading the pipe and making long screws etc., complete as directed by

engineer in charge.

67 NDSR-63.1 15 mm nominal bore Each

68 NDSR-63.2 20 mm nominal bore Each

69 NDSR-63.3 25 mm nominal bore Each

70 NDSR-63.4 32 mm nominal bore Each

71 NDSR-63.5 40 mm nominal bore Each

72 NDSR-63.6 50 mm nominal bore Each

73 NDSR-63.7 65 mm nominal bore Each

74 NDSR-63.8 80 mm nominal bore Each

Providing and fixing UPVC/CPVC ball valve of approved quality, High or low pressure, with

plastic floats complete as directed by engineer in charge.

76 20 mm nominal bore Each

77 25 mm nominal bore Each

GMRCL Page 11 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

78 32 mm nominal bore Each

79 40 mm nominal bore Each

80 50 mm nominal bore Each

81 65 mm nominal bore Each

Providing and fixing UPVC/CPVC Female brass thread Tee (FBT Tee) of approved quality

82 NDSR-64 Each

:15mm nominal bore

Providing and fixing UPVC/CPVC Female brass thread Elbow (FBT Elbow) of approved

83 NDSR-65 Each

quality :15mm nominal bore

84 NDSR-66 Core cutting as per direction of engineer Incharge

a) Core cutting work in RCC structure (Vertical as well as horizontal) -50 MM Inches

b) Core cutting work in RCC structure (Vertical as well as horizontal) -100 MM Inches

c) Core cutting work in RCC structure (Vertical as well as horizontal) -125 MM Inches

Sub-Schedule-B.5(Sheet work & Rolling shutter)

Supplying, fabricating, fitting & fixing of GI sheet 18 SWG sheet tray (fixing with dash

fastener of M10x100mm) with the help of supporting MS fate clamp of 50x4 mm and clamp

will be fixed on beam by dash fastener. Tray will be made/fabricated by way of rivets,

Nut/bolts, m-seal sealant thoroughly provided to make the joint of tray perfectly water

88 NDSR-67 proof. Rate is inclusive of all tools and plants such as cutter, welding set, power hammer Sq. m.

driller, drilling machine etc., scaffolding, transportation of material to site of work, all

skilled and unskilled labour. Work shall be carried out as per direction of site engineer.

Rate is also inclusive of all lead, lift, ascent and descent etc. complete. And to be execute

as per instruction of engineer in charge.

Polycarbonate sheet: Providing and fixing of leak proof fire resistance and UV resistance at

all height of Lexan compact clear sheet of 5mm thick GE plastic or approved equivalent

89 NDSR-68 make confirming to IS14443-1987 the rates i.e. the cost of fasteners silicon sealant, EPDM Sq. m.

gasket and all other ancillary works as required for completion of work as per Engineer- in-

charge are inclusive.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch,

including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I

plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The

sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3%

ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They

shall be of uniform pigmentation and thickness without air pockets and shall conform to IS

10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented,

textured or smooth as specified.

91 NDSR-69.1 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified Sq. m.

Providing and fixing (Aluminium Composite Panel) Sheet any colour on existing frame as

per requirement all complete in all respect as per direction and satisfaction of Engineer-in-

92 NDSR-69.2 Sq. m.

4mm thick ACP (FR grade) of Aludecor ALAS colour AD09

Providing hardware or other parts fot smooth functioning of rolling shutter. Items will be

supplied as per CPWD specifications.

94 NDSR-70.1 Brackets(sides) Each

95 NDSR-70.2 Wire Spring Each

96 NDSR-70.3 Spring Holder Each

97 NDSR-70.4 MS-Garaee device Each

98 NDSR-70.5 Gear Box Each

99 NDSR-70.6 Rolling Shutter Handle Each

GMRCL Page 12 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

100 NDSR-70.7 Locking Naka/kundee including welding Each

101 NDSR-70.8 Ball Bearing Each

102 NDSR-70.9 Garaee Rod Each

NDSR- MS-Top Cover

NDSR- Bottom Locking rail

NDSR- MS pipe shaft 2'" dia

NDSR- Side guide Rail

NDSR- MS-Grill (for existing pattern)

NDSR- Rolling Shutter lever lock

Annual repairing and maintenance of existing rolling shutters including dismantling shutter

and refining the same and fixing of new items as per requirement including cleaning, oiling,

greasing, alignment and testing complete. The cost of new items will be paid separately

110 NDSR-71 Each

except small hardware like nuts/bolts and nails which are included in this item. The scope

of work includes checking of shutters for smooth functioning quarterly or as & when

requires in emergency.

Sub-Schedule-B.6 (Carriage/Disposal)

Supply of canter on hire charges basis, for carriage of any material from metro stations to

111 NDSR-72 Each

Supply 5-7.5 HP submersible pump of discharge capacity 50-60 kl/hrs including cost of Shift of

operation etc. complete. Hour

113 NDSR-74 Supply of Sky lift with operator on hire charge basis up to 20-25 m. long boom.

Disposal of Malba away from the premises through Dumper. Rates are for each trip.

114 NDSR-75 Per Trip

(Minimum quantity of Malba = 8 Cu. m.).

Hire charge of sewage suction machine having Tank's capacity 5000 Liters or more for

115 NDSR-76 septic tank cleaning etc including the fuel, driver charges, transportation cost, cleaner staff, Each

T&P, taxes, cess etc all complete.

Sub-Schedule-B.7 (PCC/RCC/Waterproofing)

Core cutting in RCC/Plain CC of 100 mm dia having depth up to 200 mm deep. The rate

116 NDSR-77 Each

shall be inclusive of all taxes, duties etc. and nothing shall be paid extra.

Core cutting in member of RCC/Plain CC of all grades 200mm dia having depth up to

117 NDSR-78 150mm deep. The rate shall be inclusive of all taxes, duties etc. and nothing shall be paid Each

Providing, cutting and fixing Hilti chemical fastener M16x200mm with HILTI chemical grout

RE 500 V3 including drilling of hole in RCC, Concrete or brick masonary, cleaning the hole

118 NDSR-79 Each

with blow out pump, fixing the fastener with chemical grout using chemical injecting gun

etc. complete as per direction of Engineer-in-charge.

Applying bonding agent on old surface of concrete including cleaning and preparation of

119 NDSR-80 Per Set

surface with all T&P. (make - as per approved list ).

Repair of loose/damaged aluminium expansion joint strip with GP-2 or equivalent at

120 NDSR-81 Sq. m.

Platform and concourse level.

Expansion Joint: Compression seal joint

Providing and installing compression seal joint confirming to specification including

121 NDSR-82 provision of edge beams at end edges of both at joining precast diaphragm segments, cast RM

in situ units and all related operations as required to complete the work as specified in

specifications.

Providing, placing and pasting Silicone Sealant WX of approved make for sealing the

surface of concrete to aluminium, aluminium to glass, aluminium to aluminium, aluminium

GMRCL Page 13 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

to masonry surface etc. With preparing the surface and placing the sealant with the help

of gun, complete in all respect as per satisfaction of E.I.C.

Providing and pasting of Sika multiseal tape 100 mm wide at all locations including all T&P,

labour etc for cleaning the surface, applying the tape all complete as per direction of EIC.

Providing and supplying CICO Grout V1, premixed ultra-high strength non-shrink

124 NDSR-85 Bag

cementitious grout or equivalent as approved by Engineer-in-Charge.

Cleaning of existing joints (Expansion dummy and construction joints) by removing old

existing sealing compound by kerosene oil, drying with blow lamp and filling again with

Polysulphide Sealant of approved make including painting the sides of slabs with primer of

approved make complete as per satisfaction of Engineer-in-charge.

126 NDSR-87 Supplying Cold Bitumen to site as per direction of Engineer-in-Charge Each Bag

Sub-Schedule-B.8(Glass Work)

127 NDSR-88 Providing & fixing in position glass

128 NDSR-88.1 5 mm thick heat reflecting glass Sq. m.

Providing and fixing 6mm-10mm thick clear float glass in aluminium door, window,

ventilator, shutter and partitions etc. with PVC and neoprene gasket etc. complete as per

129 NDSR-88.2 Sq. m.

architectural drawing and as per the directions of engineer in charge. (make - as per

Providing and fixing of structural toughened glass 13.52 mm (6.00+1.52+6.00) in all

locations of metro stations including the cost of sealing gaps with clear / coloured sealant

130 NDSR-88.3 Sq. m.

/ silicon of approved make and brand, cutting of groove (wherever required) including

fixtures & fittings etc. complete as per site requirement. (make - as per approved list)

Providing and fixing/ pasting frosted film of approved make on existing glass panes after

131 NDSR-88.4 thoroughly cleaning of existing surface the rata is inclusive of all T&P, manpower etc as per Sq. m.

direction of Engineer-in-Charge.

Sub-Schedule-B.9(Signage)

Providing and pasting vinyl digital print signages at all locations including all T&P, labour

etc for cleaning the surface, pasting signages all complete as per direction of EIC.

133 NDSR-89.1 a) On 3mm Sunboard Base Sq. m.

134 NDSR-89.2 b) On 3mmAcrylic Base Sq. m.

135 NDSR-89.3 c) On 3mm ACP base Sq. m.

Providing, supplying and fixing High Intensity Retro reflective sheet of approved make on

3mm ACP Sheet. (Cost of ACP Sheet shall be paid extra) as per direction and satisfaction of

136 NDSR-90 Sq. m.

Engineer-in-Charge.

Printing Matter for Signage

Lettering with synthetic enamel paint of approved brand & manufacture as per direction Litter

and satisfaction of EIC. per cm

Providing and fixing acrylic hanging plate with printing on both sides of size 1 ft x 0.5 ft all

138 NDSR-92 Each

complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 6mm thick SS Plate matt finish with 4no. of holes of dia 8mm/10mm

and four edge mirrors grinding and duly chamfered,

finishing with floor, including drilling holes in floor and fixing with screws, all complete as

per direction and satisfaction of Engineer-in- Charge.

Additional wiring for illuminated signage: Supply and wiring for lighting/Receptacle in the

existing conduit for lighting circuits/single phase sockets from DB to the switch box with P

+ N _+E copper FRLSZH 1.1 KV grade cable to connect all signage’s, LEDs, Lights, switches

sockets etc. All wires shall be terminated with Pin tyle lugs and provided with ferrules for

identification normally circuit mains start from DB, MCB and run up to the switch box/MCB

controlled lights up to first point.

141 NDSR-94.1 Single circuit consisting of 3 Run 2.5 Sq. mm copper conductor FRL SZH 1.1 KV Grade cable RM

142 NDSR-94.2 Double circuit consisting of 6 Run 2.5 Sq. mm copper conductor FRLSZH 1.1 KV Grade cable RM

143 NDSR-94.3 LED Rope light for Glow type signage RM

GMRCL Page 14 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Sr. No. Description of Item Unit

144 NDSR-94.4 Adapter Nos.

Providing and fixing of Anti Birds Spikes made of high quality of Poly Carbonate, 5 Row

145 NDSR-95 304mm. Rates are inclusive of screws, cable ties, adhesives, fasteners up to 5-meter Height m.

complete as per direction of Engineer-in-Charge.

Attending various day to day complaints consisting of repairs to the doors, windows,

tables, chairs, ventilation, leakage of pipe lines, fixing the fittings using putty, nails, screws,

minor paints in parts not exceeding 0.50 Sq. m. and rectifying the defects, cause of

complaints, with necessary T&P but without changing/replacing the fittings/fixtures and

its internal parts and it shall be treated as one complaint only. This includes maintenance

of all the buildings and installations, involving repairs & maintenance & attending the

complaints/faults/breakdowns and taking rectification action, within specified time to

ensure the 24 x7 operation of Metro systems and installation/fixtures etc. [ material like

screws/nails for fixing of tower bolts/door handles etc. and washers/ thread/ sefeda etc.

in bib cock pillar cocks etc. to prevent the leakage is included in the rates.]

Note: - For one location attending one complete unit (such as one door, one window, one

table, one ceiling unit of one room, one Almirah etc. shall be treated as one complaint.)

148 NDSR-96.1 Cost for Each complaint Each

Supply of Supervisor required in case of Labour supply only. Nos./

GMRCL Page 15 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

Annexure – 2, DETAILS OF TAXES AND DUTIES (Tax Bifurcation) INR: Indian Rupees (Tax Estimate)

GST (Goods and Services Tax)

Customs Duty Total

CGST SGST IGST Any other Tax Amount of

t on t on Amount Amount

Amou Amount on Amoun Amoun

which Rate which Rate Amount Rate on which Rate Amount on which Rate (6) = sum

nt which tax/ t t

tax/ (%) tax/ (%) (INR) (%) tax/ duty (%) (INR) tax/ duty (%) of (1) to

(INR) duty levied (INR) (INR)

duty duty levied levied (5)

al Note :1 Contractor at any point of time shall be bound to share the details pertaining to the Input Tax Credit availed or to be availed along with the supporting documents.

Note:2 In the Tax Schedule Contractor shall require to furnish component wise tax details.

Note:4 GST TDS will be deducted from the invoice considering the prevailing rates

Note 5: It shall be sole responsibility of Contractor to pass all the accrue or to be accrued Input tax credit to GMRC as per Section 171 of CGST Act.

GMRCL Page 16 of

Tender No: GMRC/CIVIL MAINTENANCE/ PRIORITY REACH-2/PH-2/2026 BOQ

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer C15 & C26 of ITT)

1The following are the particulars of minor deviations from the requirements of the Tender Document:

Sr. No Clause Deviations Price adjustment for each

1 The Tenderer shall indicate price adjustment against each deviation in Annexure 13A of BOQ. This price is the price

which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer.

2 Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No

Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the

tenderer has not proposed any deviations from tender documents.

3 If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender,

other than in this Annexure, it will have no effect.

Signature of authorized signatory on behalf of tenderers

GMRCL Page 17 of