Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-Finance 601 6TH FLOOR INFINITY BENCHMARK ROAD NO 25 GP BLOCK SECTOR V BIDHANNAGAR NORTH 24 PARGANAS WEST BENGAL 700091 UDYAM WB 10 0009593 | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | ₹1.9 L | L1 | Accepted-Finance Lowest bidder |
| 2 | L2₹2.0 LRejected-Finance | ₹2.0 L | L2 | Rejected-Finance Not lowest bidder |
| 3 | L3₹2.1 LRejected-Finance | ₹2.1 L | L3 | Rejected-Finance Not lowest bidder |
| Sl No | Description | Qty | Unit | FAIRDEAL CONSTRUCTION L2 | BISWAS ENTERPRISE L3 | RSC Projects Private Limited L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and cutting, dirlling, Laying, edge preparation for fabrication by Arc welding, to hang the MS structure (at 6 M height) from roof top EP and anchoring of side supports with checkered plate and anchor fastener on side walls. After removing the old structure New structure should be fabricated. The New structure will be used for hang the Helium GasBag. | 1 | Job | 35,900 ₹35,900 | 34,000 ₹34,000 Lowest | 82,900 ₹82,900 |
| 2.00 | Supply of K type 25 NB or greater dia, 1.5 mm or greater wall thickness Copper Pipe and SS 304 flat bar 20 M long 25 x 5 mm cross section. All the copper pipe should be cleaned, cut and edge prepared before fabrication of pipe structure by bending using torch heating and pipe bender to give the structure required geometrical shape as per drawing. This structure will be hanged from MS Angle structure with the help of SS flat strips, SS nut Bolt and C clamp. Finally the Helium GasBag will be hanged on this structure using nylon cord neated soccer net tied using loose nylon cord. | 1 | Job | 90,000 ₹90,000 | 80,000 ₹80,000 | 48,800 ₹48,800 Lowest |
| 3.00 | Supply and fabrication of MS grill based horizontal platform (2 sq M, at 4 M height) with MS Angle 40 x 40 x 5 mm and MS Flat 25 x 5 mm and railing at the edge of the platform 1.2 M height, made with MS Angle 40 x 40 x 5 mm and MS Round Pipe dia 25 x 3 mm thickness and modification of existing monkey ladder support by MS flat 25 x 5 mm in half round shape. | 1 | Job | 55,500 ₹55,500 | 40,000 ₹40,000 | 28,900 ₹28,900 Lowest |
| 4.00 | After completion of fabrication of all the MS components, it should be thoroughly cleaned using sand paper and painted with zinc rich primer (2 coat) and finally with synthetic enamel paint of reputed brand (2 coat). | 1 | Job | 8,000 ₹8,000 Lowest | 23,000 ₹23,000 | 12,680 ₹12,680 |
| 5.00 | Sypply and make one time use bamboo structure with top wooden platform (6 x 5) Sq. M at 6 M height to facilitate accident free fabrication, erection GasBag structure and painting . Dismantling of the bamboo structure to be done after completion of the entire job. Debris and scrap materials must be removed and thrown to scrap yard and clean the workplace to get the completion certificate of the Job. | 1 | Job | 10,000 ₹10,000 Lowest | 37,000 ₹37,000 | 20,300 ₹20,300 |
Tender Value
₹1.9 L
EMD Value
₹3,880
Closing Date
4 Jun 2026, 3:00 pmClosed
Executive Engineer, VECC
1/AF, Bidhannagar, Kolkata-700064
Supply and fabrication of Gas Bag hanging structure with MS Platform, Railing and Monkey Ladder modification at Cryogenic Plant Building, 1 AF, Bidhan Nagar, Kolkata 700064.
2026_VECC_908477_1
VECC/MEG/CPID/RSB/NIT/T-621
Open Tender
Job Works
Works
60 days
VECC, Kolkata
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹3,880
13 Aug 2026
18 May 2026
5 Jun 2026
18 May 2026
4 Jun 2026
29 May 2026
25 May 2026 - 28 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and cutting, dirlling, Laying, edge preparation for fabrication by Arc welding, to hang the MS structure (at 6 M height) from roof top EP and anchoring of side supports with checkered plate and anchor fastener on side walls. After removing the old structure New structure should be fabricated. The New structure will be used for hang the Helium GasBag. | 1 | Job | 1,698 | ₹1,698 |
| 2 | Supply of K type 25 NB or greater dia, 1.5 mm or greater wall thickness Copper Pipe and SS 304 flat bar 20 M long 25 x 5 mm cross section. All the copper pipe should be cleaned, cut and edge prepared before fabrication of pipe structure by bending using torch heating and pipe bender to give the structure required geometrical shape as per drawing. This structure will be hanged from MS Angle structure with the help of SS flat strips, SS nut Bolt and C clamp. Finally the Helium GasBag will be hanged on this structure using nylon cord neated soccer net tied using loose nylon cord. | 1 | Job | 1,698 | ₹1,698 |
| 3 | Supply and fabrication of MS grill based horizontal platform (2 sq M, at 4 M height) with MS Angle 40 x 40 x 5 mm and MS Flat 25 x 5 mm and railing at the edge of the platform 1.2 M height, made with MS Angle 40 x 40 x 5 mm and MS Round Pipe dia 25 x 3 mm thickness and modification of existing monkey ladder support by MS flat 25 x 5 mm in half round shape. | 1 | Job | 1,698 | ₹1,698 |
| 4 | After completion of fabrication of all the MS components, it should be thoroughly cleaned using sand paper and painted with zinc rich primer (2 coat) and finally with synthetic enamel paint of reputed brand (2 coat). | 1 | Job | 1,698 | ₹1,698 |
| 5 | Sypply and make one time use bamboo structure with top wooden platform (6 x 5) Sq. M at 6 M height to facilitate accident free fabrication, erection GasBag structure and painting . Dismantling of the bamboo structure to be done after completion of the entire job. Debris and scrap materials must be removed and thrown to scrap yard and clean the workplace to get the completion certificate of the Job. | 1 | Job | 1,698 | ₹1,698 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.42 MB
BOQ_954818.xls
BOQ • 0.24 MB
NIT.pdf
Tender Documents • 3.40 MB
InformationfromVendor.xls
Tender Documents • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].