CONSTRUCTION OF SANITARY COMPLEX NEAR OLD JAMIA MASJID UNDER MPLADS. YEAR 2025-26 P/H MALPORA, BLOCK NARWAH

Earthwork in excavation by manual means in trenches for foundation (Not exceeding 1.5m in width), depth upto 1.5m incl. disposal of excavated earth upto 1m from cutting edge. (All Kinds of Soil)

Providing & Laying of Dry stone soling hand packed and plum in concrete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) plumb 20%

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4( 1 cement : 4coarse sand) upto plinth lvl

R/R massonery laid dry using quarrey stone

structural steel work in single section fixed with or without connecting plate and applying a priming coat of approved steel primer complete job

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases of columns etc. for mass concrete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1.2:4 (1 cement : 2coarse sand :4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

12 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand

Finishing walls with premium acrylic smooth exterior paint thick finished even and smooth two or more coats

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 20 mm thick bed of cement mortar 1:4 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Carraige of Sand / bajri by MT work for 20 kms

Carraige of bricks by MT/from source to site of work for 85 kms

Providing and fixing white vitreous china pedestal type water closet (indian type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, con colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings (Water storage tank)

P/Fixing Ms sheet of 1mm thick for doors ,including cutting complete job incl applying a priming coat of approved steel primer all complete job

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. External work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 20mm OD(SDR-7.4)

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work on wall with clamps at 1.00 meter spacing PN-16 pipe , 20mm OD(SDR-7.4)

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of site engineer incharge

P/Fixing of bib cocks/Angle cocks of 15mm nominal bore of quality complete job

P/F 75 mm sewage pipes of class B of approved brand.

P/F 100 mm sewage pipes of class B of approved brand.

P trap

S trap

P/F cowel 75 mm

D bend

Providing and fixing of Cp grating 100mm dia

P/F ball valves 15 mm nominal bore of approved quality

p/f of pipes incl cost of unions ,sockets etc 25 mm nominal bore (supply line 150 rft )of approved brand and maufacture

Carraige of Stones MT work for 20 kms

P/F of information sign board and photograph incl painting for design of SBM logo as directed by engineer incharge