REPAIR TO JOINERY WORK AND CERTAIN B/R REPAIRS FOR MD AND OTM ACCN OF ODTD UNDER AGE B/R (WEST) AT GE DEHU ROAD

Amount

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) of wood, steel, aluminium etc, exc. 1.5 Sqm but n. exc. 4 Sqm each.

All as per item No 1 above but n.exc. 1.50 sqm each

Taking down shutters of any description exc 1 sqm but n. exc. 2 Sqm each.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts measured from the face of the jamb into wall exc half brick but no exc one brick.)

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm

M/L for PCC 1:2:4 type B -0 (using 12.5mm graded aggregate ) in door frame filling

S&F factory made 2nd class hardwood 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauze / glass (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F Flush shutter 30 mm thick, solid core construction with block board core & ply wood face panels commercial type on both sides

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer andas per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Fiberglass ReinforcedPlastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick S&F FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thick PVC Sheet re-in-forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a priming coat of Pink primer.

Supply and fixing three track sliding window including frame with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engineer-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note:- Cost of Tinted glass & wire cloth shall be included in the quoted rate of the item).

S & F aluminium powder coated decogrill 7.5m width and 6 mm thick of design DG 102 having weight 3.131 kg/Sqm fixed to and including powder coated aluminium U type frame with CP brass / SS Screws @ 200 c/c including cutting the grill to proper opening size for fixing and operation of handle and fixing powder coated aluminium section around the opening all as per requirement and direction of Engineer-in-Charge.

S & F in repairs pre-laminated particle board 25mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl leaping patti complete.

S&F in repairs Butt Hinges stainless steel 100 mm long pin, bright polished and fixed, typeB-11 complete .

S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast orextruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

S&F Door closer hydraulically regulated, aluminium extruded, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples .

S&F 3 mm thick sheet glass ordinary quality fixed in panes n.exc. 0.50 Sqm each pane and glazing with oil putty complete including Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips

S& F 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete including hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

M&L for false ceiling with 10mm thick of panel size 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed.Make: Gyproc or Equivalent

M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifiaction complete all as specified and as directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for vitrified light shed tiles 8 to 10 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed.

All as per item No 36 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L for providing edge to moulding to 18-20mm thick marble, granite stone any description including machine polishing to edge to give high gloss finish ect complete all as specified and as directed by Engineer-in-Charge

Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, rounding to edges of granite stone etc.complete all as specified and directed.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

M&L for rendering 15 mm thick (internal plaster) on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M&L for rendering 15 mm thick (external plaster) on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of primer on plastered surfaces complete all as specified and as directed..

Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.

S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure fancy type, chromium plated with longshank and cup (concealed type) screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.

S&F in repairs 15 mm dia bib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.

S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia all as specified and as directed by Engineer-in-Charge

S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc specified and directed complete including fixing in any opening.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or labor-atory with plugs, washers and wastes; including fixing cantilever brack-ets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with 40mm dia CP wast coupling complete.

Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level) complete all as specified and directed.

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed

M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

Material and labour for complete removal of existing treatment of plastered OR unplastered old decorated surface walls by brooming down and applying two coats of weather proof paint on external surfaces including a coat of acrylic based primer at any height of building / tower complete all as specified and as directed by Engineer-in-Charge.

M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction. (c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. specifically provided for complete all as specified and directed.

M & L for providing 25 mm thick PCC 1:2:4 type B1 ( using 20mm graded stone aggregates ) as in filling in levelling course one roof slab complete all as specified and directed.

Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.

Supply only Liquid water proofing compound.

S Y Itkar Construction and Company (BID ID -3413958)

DR J S CHADHA AND SONS (BID ID -3413847)

Santhi Enterprises (BID ID -3413581)