REPAIR/MAINTENANCE TO PCC FLOORING, PLASTERING, BW, JOINERY, TILING,ROOF WITH WALL CLADING,SANITARY FITTINGS,CHEQUERED TILES,PAVER BLOCKS AND CERTAIN MISC B/R WORKS AT G AREA AND IN LIVING AREA AT INS GARUDA, UNDER GE (NW) KOCHI

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises,complete all as specified and as directed

M&L for non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match , laid over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

M&L for vitrified ceramic tiles, 10 mm thick (square / rectangular),light shade, polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm,, laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match,laid over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

M&L for glazed ceramic coloured tiles, of size 350x250 or 450x350mm, 7 mm thick as in dado/ skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed

M&L for 15mm thick rendering on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed .

M&L for 15mm thick rendering on brick or concrete wall surfaces with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed .

M&L for 5mm thick rendering on concrete surfaces as in ceiling with cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed .

M&L preparing new surfaces of ceilling and applying two coats of white wash, complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed .

Demolition of plain cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above gound level) complete all as specified and as directed .

M & L for hardcore of broken stone of boulders gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed .

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and directed .

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry, complete all as specified and as directed .

M&L for 20 mm thick Screed bed or bedding layer in cement mortar (1: 6 ) for laying in floor finishes complete all as specified and as directed .

M & L for coarse aggregate for granolithic floors, graded from 12.5mm to 4.75 mm, spread and levelled in layers n exc. 40 mm thick, watered and rammed to a true surface complete all as specified and as directed by

M&L for machine pressed pre cast concrete interlocking paver bolck any shape and size confirming to IS 15658/2006 of 60mm thickness M 35 grade with grey cement and pigment, ,complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed

Taking down PVC chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and as directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube, and fixing in opening as per specifications and drawing, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing.Complete all as specified and as directed

S& Fix 30 mm thick second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats ,complete all as specified and as directed .

S&F 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed

S&F 75 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150mm aluminium handles, cast type, anodised complete all as specified and as directed .

S&F 200 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodized, sliding door bolt plate with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed .

M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed .

M&L for preparation of new wooden surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over acoat of pink primer complete all as specified and as directed .

M&L for mild steel flat iron of size 25 x 3mm as in hold fast for fixing door frame etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed .

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for embedding of hold fast etc.including necessary form work complete all as specified and as directed .

S & F in repairs Wash basins, china Vitreous China (flat back or angle back type) of 630 X 450 mm & brackets incl cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of supply and wastage pipe ,complete all as specified and as directed .

S&F in repair fancy type 15mm pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed .

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45 gms) complete all as specified and as directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm to suit 15 mm bore G.I pipe/PVC pipe, complete all as specified and as directed.

S&F in repair Vitreous China Urinal of size 465x355x265 mm (minimum), White, Bowl type, Flat back including providing and Fixing Plugs, bedding Urinal against Wall in Cement Mortar 1:2, securing Urinal to Plugs with and including 60mm long Brass Screws, pointing around Urinal back in Cement and fixing with Grating and Union for Discharge Pipe including Flush Pipe and Waste Pipe), complete all as specified and as directed.

S&F in repairs aluminium wire cloth, 0.45 mm nominal dia or wire and average width of aperature 1.40mm, fixed with aluminium wire stapples to wooden shutters or steel frames including wooden beads or necessry fixing arrangements ,complete all as specified and as directed .

S&F in repairs Cast iron body Door closer hydraulically regulated, designation No 1, universal type, suitable for door shuttersup to 700 mm in width and of weight not more than 35 kg and fixed ,complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L mild steel( Fe 410 -W (Gde- E- 250) quality- A ) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for Mild steel rolled sections conforming to Fe 410-W (Gde E-250, quality A) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for preparation of new steel surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .

Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed .

S&F mangalore pattern roof tiles, interlocking at sides, joints laid dry complete all as specified and as directed .

S&F mangalore pattern ridge tiles or hip tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed .

Dismantling timber scantlings 40 sq. cm and over in section, in any position framed work and all as directed.

S&F second class hard wood scantling, clean sawn,scantling in timber framed work complete all as specified and as directed .

Dismantling timber scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins etc in unframed work and all as directed.

M&L second class soft wood (CHIR) plain fillets square ,rectangular any section clean sawn, secured with nails or brads, sectional area exe 6 sqcm and n exe 13 sqcm, complete all as specified and directed

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and directed.

S&F interlocking aluminium alloy anodized snap grid consists of main Tee runners of size 38mm x 25mm x 1.5mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25x25x2mm, aluminium alloy extruded section shall be aluminium anodized (minimum 15 micron) and shall conform to IS-733, IS-1285 and IS-737 including GI hangers 6 mm dia (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3mm size 60 mm long and expansion hold fastners 12.5mm dia 40mm long complete all as specified and directed

S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework in ceiling flat or sloping fixed with jointless finish with jointing compound and tape as per manufacturer's instructions complete all as specified

M & L for preparation of new or previously treated ceiling surfaces and applying one coat of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.

S&F for 10mm thick PVC insulation Panels with EPS stuck to 1mm plain PVC sheet suitably placed in wall/ false ceiling grid made of Aluminium /GI/ M.s as per specification and drawing all as specified.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified.

S&F 12mm thick decorative perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed in aluminium snap grid false ceiling with staples all as specified

M & L for preparation of new or previously treated perforated board surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Albert Rebello and Company

M/s Antony Kallarakkal

M.J.JOY AND COMPANY