Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
2 Sept 2026, 3:00 pm
Executive Engineer
O/O. the Executive Engineer, PWD(RandB) Belonia Division, South Tripura
Re-carpeting, Patch Metalling, Patch grouting, Seal coat, Box culvert, Protection wall and other allied works.
2026_CEPWD_76107_1
78/NIT/SE-III/R/PWDRandB/26-27
Open Tender
Civil Works - Roads
Percentage
180 days
B.C. Nagar R.D. Block area
Please refer Tender documents.
5 documents required · 5 mandatory
₹4,000
₹2.2 L
21 Aug 2026
21 Aug 2026
2 Sept 2026
21 Aug 2026
2 Sept 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for Structures
A. Without dewatering.
Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
(I) Ordinary Soil
(i)Upto 3 m depth | 0.2 | Cum | 458.2 | ₹91.64 |
| 2 | Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200
(I) Sand filling | 1 | Cum | 1,361.06 | ₹1,359.7 |
| 3 | Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement)
(I) P.C.C grade M 10( using jhama brick aggregate)
(i) Nominal mix 1:3:6 | 1 | Cum | 9,484.8 | ₹9,475.32 |
| 4 | Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 and 1204, (including centering, shuttering, staging etc. but excluding reinforcement.
(I) P.C.C grade M 15
(i) Nominal mix (1:2.5:5) | 0.4 | Cum | 11,243.3 | ₹4,486.08 |
| 5 | Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centering, shuttering, staging etc. but excluding reinforcement)
i) R.C.C grade M-25
a) upto 5 m height | - | Cum | 12,756.65 | - |
| 6 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202. | 0.8 | Tonne | 91,869.48 | ₹73,486.4 |
| 7 | Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line & grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm including reinforcement as per drawing and MoRD technical specifications Clauses 800, 900 and 1208.3 (including centering, shuttering, staging etc. and reinforcement) | 1 | Mtr | 4,320.77 | ₹4,316.45 |
| 8 | Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7. | 0.2 | Mtr | 392.2 | ₹78.05 |
| 9 | Providing & laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8. | - | Cum | 4,882.3 | - |
| 10 | Backfilling behind abutment, wing wall & return wall complete as per drawings & MoRD technical specification Clause 1204.3.8.
i) Sandy material | - | Cum | 1,592.1 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.71 MB
DNIeT78.pdf
Tender Documents • 2.52 MB
BOQ_77474.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].