PROVIDING & LAYING NEW DRAINAGE LINES ON VARIOUS REMAINING T.P. ROADS AND AUGMENTATION OF OLD DRAINAGE LINES AS PER REQUIREMENTS IN EAST ZONE-A (VARACHHA) & OTHER ZONE AREA WITH IN SURAT MUNCIPAL CORPORATION (2nd Attempt)

Name of Work:- PROVIDING & LAYING NEW DRAINAGE LINES ON VARIOUS REMAINING T.P.

ROADS AND AUGMENTATION OF OLD DRAINAGE LINES AS PER REQUIREMENTS IN EAST

ZONE-A (VARACHHA) & OTHER ZONE AREA WITH IN SURAT MUNCIPAL CORPORATION (2 nd

ITEMS QTY. RATE Unit AMOUNT

Excavation for pipe line trenches for water supply, sewerage line,

machine hole etc. all withshoring and struting if required

as per required gradient and line including safetyprovisions

using site rails and stacking excavated stuff including up to all

required leadcleaning the site etc.

complete for all lifts and strata as specified.

In hard murrum, boulders incl. macadam road. 697.974 155.25 C.M.

Item No. 1.A.1 (a), Page No. 32 GWSSB SOR 2022-23

Excavation in bituminous road as per required gradient and line

including safety provisions using site rails and stacking excavated

stuff including up to all required lead cleaning the

site etc. complete for all lifts as specified.

Excavation in Bituminous road 1628.61 288.65 C.M.

Section 1&2 B, Item No. 1.A.1 (d), Page No. 32, GWSSB

Excavation for pipe line trenches for water supply, sewerage line,

machine hole etc. all withshoring and struting if required

as per required gradient and line including safetyprovisions

using site rails and stacking excavated stuff including up to all

required leadcleaning the site etc.

complete for all lifts and strata as specified.

In C.C. Road. 30.00 427.80 C.M.

Item No. 1.A.1 (d), Page No. 32 GWSSB SOR 2022-23

Excavation for pipe line trenches for water supply, sewerage line,

machine hole etc. all with shoring and struting if required as

per required gradient and line including safety provisions

using site rails and stacking excavated stuff including up to

all required lead cleaning the site etc. complete for all lifts

and strata as specified. In all sorts of

soil and soft murrum

(A) Upto 1.5 Mt. dpt.from G.L. 6065.96 102.35 C.M.

(E) 6.0 Mt TO 7.50 Mt depth 0.00 129.95 C.M.

(F) 7.5 Mt. TO 9.00 Mt. Depth 0.00 162.15 C.M.

Section 1&2 B, Item No. 1.A.1 to 6 (a), Page No.

GWSSB SOR 2022-23

ITEMS QTY. RATE Unit AMOUNT

Providing cutting of existing bituminous surface up to 6192.84 51.00 RM

suitable depth in line and alignment using Mechnically

operated cutter machine before excavating existing surface for

utility laying including cost of all type of machinery,

fuel, labour etc. and as per direction of engineer incharge.

RAC Approved Rate

Supplying & Filling with fine sand in compacted thickness over

the base including watering ramming, consolidating & dressing

etc. complete. Item includes by using vibratory plates

compacted machine and as directed by engineer in

Item No. 10, SMC Drainage SOR 2022-23

Providing and supplying ISI Standard R.C.C. pipes (of

Sulphate Resisting cement) in standard lengths of following class

and diameter suitable for rubber ring joints including all taxes,

insurance, transportation,freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental

stores, stacking etc. One rubber ring should be supplied with each

full length socketed pipe, cost included in rates below.

Lowering, laying and jointing R. C. C. pipes of following

diameters in proper position, grade and alignment at all level as

directed by Engineer-in-charge including conveyance from

stores to site of work, labour, giving hydraulic testing

as per ISI code.

(A1) 150 mm dia (NP3 Class) 0.00 403.45 Rmt.

(A2) 150 mm dia (NP4 Class) 0.00 563.45 Rmt.

(D1) 250 mm dia (NP3 Class) 0.00 638.55 Rmt.

(D2) 250 mm dia (NP4 Class) 681.00 868.55 Rmt.

(E1) 300 mm dia (NP3 Class) 0.00 891.85 Rmt.

(E2) 300 mm dia (NP4 Class) 1678.50 1223.85 Rmt.

(F1) 350 mm dia (NP3 Class) 0.00 1031.95 Rmt.

(F2) 350 mm dia (NP4 Class) 0.00 1531.95 Rmt.

(G1) 400 mm dia (NP3 Class) 0.00 1324.80 Rmt.

(G2) 400 mm dia (NP4 Class) 0.00 2047.80 Rmt.

(H1) 450 mm dia (NP3 Class) 0.00 1557.65 Rmt.

(H2) 450 mm dia (NP4 Class) 0.00 2375.65 Rmt.

(I1) 500 mm dia (NP3 Class) 0.00 1702.35 Rmt.

(I2) 500 mm dia (NP4 Class) 967.50 2554.35 Rmt.

ITEMS QTY. RATE Unit AMOUNT

(J1) 600 mm dia (NP3 Class) 0.00 2208.20 Rmt.

(J2) 600 mm dia (NP4 Class) 0.00 3256.20 Rmt.

(K1) 700 mm dia (NP3 Class) 0.00 3205.20 Rmt.

(K2) 700 mm dia (NP4 Class) 0.00 4208.20 Rmt.

(L1) 800 mm dia (NP3 Class) 0.00 3522.30 Rmt.

(L2) 800 mm dia (NP4 Class) 0.00 5922.30 Rmt.

(M1) 900 mm dia (NP3 Class) 0.00 3992.00 Rmt.

(M2) 900 mm dia (NP4 Class) 0.00 7029.00 Rmt.

(N1) 1000 mm dia (NP3 Class) 0.00 5252.25 Rmt.

(N2) 1000 mm dia (NP4 Class) 0.00 8713.25 Rmt.

(O1) 1100 mm dia (NP3 Class) 0.00 5533.35 Rmt.

(O2) 1100 mm dia (NP4 Class) 0.00 9141.35 Rmt.

(P1) 1200 mm dia (NP3 Class) 0.00 6405.00 Rmt.

(P2) 1200 mm dia (NP4 Class) 0.00 10210.00 Rmt.

(Q1) 1400 mm dia (NP3 Class) 0.00 8178.10 Rmt.

(Q2) 1400 mm dia (NP4 Class) 0.00 14801.10 Rmt.

(R1) 1600 mm dia (NP3 Class) 0.00 11830.55 Rmt.

(R2) 1600 mm dia (NP4 Class) 0.00 18365.55 Rmt.

(S1) 1800 mm dia (NP3 Class) 0.00 14355.50 Rmt.

(S2) 1800 mm dia (NP4 Class) 0.00 20002.50 Rmt.

Section 1&2 A, Item No. 10.1.D&E, Page No. 15, Section 1&2

B, Item No. 11.b, Page No. 39, GWSSB SOR 2022-

Providing and constructing Sewer machine holes, scraper machine

holes and unit house connection chamber, as per the type design in

brickmasonry in C. M. 1:5 and inside and outside 20mm thick

plastering in C. M. 1:3 necessary 100 mm coping with

reinforcement in R.C.C.M.200 fixing C. I. steps and fixing

machine hole frame and covers (But excluding supply of

machine hole frame and covers) over machine holes and

houseconnection chambers and fixing machine hole covers (but

excluding supplying of machine hole covers) over scraper

machine hole etc. complete,providing and fixing safety

chain wherever necessary as per the stipulations in the type design

as per latest CPHEEO manual.(excl. excavation).

ITEMS QTY. RATE Unit AMOUNT

TYPE-A 1200 mm DIA

(Add or Deduct Rs.662.8.00 per

0.10 Mt.Depthincrease or

TYPE- B 1500 mm DIA

(Add or Deduct Rs.1231.30 per

0.10 Mt.Depthincrease or

TYPE-C 1500 mm DIA

ITEMS QTY. RATE Unit AMOUNT

(Add or Deduct Rs.1878.60 per

0.10 Mt.Depthincrease or

Providing and Fixing in position R.C.C. ventilating column

Dewatering by pumping set of required capacity including

temporary platform carting pumping at site and fixing the

same in position including all accessories, and fuel and

labour etc. complete.

Pump set of Capacity 14400.00 18.32 HP/Hr

Section 2 E, Item No. 1, Page No. 104, GWSSB SOR

Coloured RCC Precast Machine hole Frame & Cover Manufacture,

supply & Delivery at store or at site of work precast RCC M-40

Grade Frame & Cover suitable to drainage machine hole and as per

type design & drawing including cost of reinforcement M.S.

Angles or Flat, curing mould work etc.

(A) For Circular machine hole (heavy duty) 122.00 2294.00 No.

Section 1&2 A, Item No. 10.4.A, Page No. 16&17,

GWSSB SOR 2022-23

(B) For Scraper machine hole. 0.00 7289.00 No.

Item No. 8 b, SMC Drainage SOR 2022-23

(C) For House Connection Chamber light duty 10.00 1733.00 No.

Section 1&2 A, Item No. 10.4.C, Page No. 16&17,

GWSSB SOR 2022-23

Providing and filling Rubble including hand packing and 0.00 1064.80 C.M.

filling interstices with quarry spalls behind abutment and

between ruturns as derected.

Item No. 22, SMC Housing SOR 2023-24

Shoring or timbering for trench with 50 mm thick planks and

suitable size struts etc. complete.

Section 1 G, Item No. 16, Page No. 82, GWSSB SOR

ITEMS QTY. RATE Unit AMOUNT

Refilling the pipeline trenches incl. ramming, watering,

consolidating desposal of surplus stuff as directed within a

radius of 3 km.

Section 1&2 B, Item No. 14, Page No. 40, GWSSB SOR

Providing and constructing rectangular brick masonry

chamber for house connection as per type design in brick

masonry in C. M. 1:3 including M-100 in foundation M-150 in

benching inside plastering in C. M. 1:3 and outside plastering

in C. M. 1:3 coping in M200 and fixing RCC precast

machine hole frame and covers, but Excl. supply of

machine hole and cover etc. complete excl. excavation.

Section 2 D, Item No. 4, Page No. 102, GWSSB SOR

Making connection with the machine hole by boring hole on the 20.00 267.86 No.

masonary of machine hole and jointing pipe with cement mortar in

prop. (1:2) inside as well as outside of existing machine

hole,curing etc.complete as directed by Engineer-in

Providing and supplying ISI Standard R.C.C. pipes in

standard lengths of following class and diameter suitable for rubber

ring joints including all taxes, insurance,

transportation,freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores,

stacking etc. One rubber ring should be supplied with each full

length socketed pipe, cost included in rates below.

Lowering, laying and jointing R. C. C. pipes in of following

diameters in proper position, grade and alignment at all level as

directed by Engineer-in-charge including conveyance from

stores to site of work, labour, giving hydraulic testing as per

(A)100 mm dia NP2 0.00 248.67 Rmt.

(A)150 mm dia NP2 50.00 375.45 Rmt.

Item No.5, Page No. 10, Section 1 & 2 B, Item No.10

Page No. 38, GWSSB SOR 2022-23

Providing and supplying in standard length ISI mark rigid 0.00 113.25 Rmt.

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no.

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete. 6 kg/cm2

Lowering, laying, fixing and jointing PVC/uPVC/cPVC

pipes and specials of following class and diameter including cost

of conveyance from stores to site of works including cost of

labour, material, cement solvent, giving satisfactory hydraulic

testing as per ISI code.

ITEMS QTY. RATE Unit AMOUNT

(C)140 mm dia 0.00 352.45 Rmt.

Section 1&2 A, Item No. 3.1 B, Page No. 6, Section 1&2 B, Item

No. 8, Page No. 37, GWSSB SOR 2022-23

Work of Temporary diversion of sewage by plugging the

machineholes at upstream and downstream of the sewer

stretches proposed to be replaced. The rubber plug required for the

plugging the drainage line shall be procured by the contractor and

the same shall be the property of contractor.

150mm-400mm sewer line 15.00 20089.29 Nos.

450mm-600mm sewer line 15.00 20982.14 Nos.

700mm-1200mm sewer line 0.00 23660.71 Nos.

SMC Approved Rate

Providing & Installation of barricades incl. supplying, 2994.30 196.43 SM

painting, with flurescent paint and fixing, CGI sheets 24 SWG

of 1.80 m height & M.S. posts angle 40 x 40 x 5 mm at 2.0 m c/c

and dismantling the same after complition of

work as directed by Engineer - in - Charge.

Carting and Recarting of excavted earth from any site to

required place as per requirement and directed by engineer

(K) Above 5.0 K.M. & Up To 10.0 K.M. 0.00 110.80 C.M.

Statement No. 5(A), Sr. No. 3.2.1.A, Page no. 302, Surat

District R&B 2023-24

Preparation of as built drawing of pipeline and different 3.327 6250.00 KM

Machine hole slaid under this work by showing location of each

and every pipe in two dimension-horizontal and vertical

with respect GIS systemalong with invert levels of the pipeline

and different Machine holes . The Contractor shall submit two

sets of as built drawings periodically, without which the

subsequent R.A. Bill of the work will not be processed payment

purpose. On completion of the entire work the contractor shall

submit as built drawings for the whole work in six (6) sets along

with two (2) soft copies as directed by the Engineer-in-charge.

The item includes all required equipments, materials, man power

for execution of

ITEMS QTY. RATE Unit AMOUNT

Drilling of various dia Horizontal borehole for watermain 0.00 3,467.89 Rmt.

pipeline crossing under the road incl in all strata with

requried length incl fixing of various dia M.S/RCC/DICL

casing pipe with pushing etc complete various size of pipe for

various dia watermain

Without Water main

250 mm dia 5 mm thickness

400 mm dia 6 mm thickness 0.00 7,973.09 Rmt.

500 mm dia 8 mm thickness 0.00 11,604.16 Rmt.

824 mm dia OD 12 mm thickness 55.00 22,358.84 Rmt.

900 mm dia 12 mm thickness 0.00 0.00 Rmt.

1000 mm dia 14 mm thickness 0.00 31,065.00 Rmt.

1100 mm dia 16 mm thickness 0.00 37,935.00 Rmt.

1232 mm dia OD 16 mm thickness 0.00 41,189.38 Rmt.

1436 mm dia OD 18 mm thickness 0.00 52,731.68 Rmt.

1640 mm dia 22 mm thickness 0.00 71,456.00 Rmt.

1844 mm dia 22.0mm thickness 0.00 80,071.00 Rmt.

Demolition/Dismentalling RCC work or masonary work or

removing of paver block flooring in any part inculuding

stacking of serviceable/useful material and disposal of

unserviceable material with all lead and lift.

(a) Brick masonary work/Paver block 0.00 550.40 CM

(b) RCC work 0.00 1057.85 CM

(c) Unreinforced c.c. 0.00 609.26 CM

Surat R & B SOR 2023-24

Providing and Casting in situ mass cement concrete in grade M10 0.00 3662.00 CM

proportion 1:3:6 (1 cement :3- coarse sand : 6- graded stone

aggregate of 40 mm nominal size)using granite quartzite

trap metal of size 12mm to 25mm including

consolidation curing etc. complete

Item no.2, Page No. 43, GWSSB SOR 2022-23

Providing & construction brick work using Fly Ash bricks having 0.00 4237.00 CM

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc.

comp. Foundation and plinth

Item No. 9, SMC SOR 2023-24

Providing 15 mm thick plaster in C.M. 1:3 in single coat for 0.00 237.51 SM

plastering for all heights for brick masonary surface and all

RCC surface and finished even and smooth with floating

coat of neat cement slurry as directed by Engineer in charge

Item No. 25, SMC SOR 2023-24

Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5 sand:3 0.00 5292.00 CM

graded stone agg. 20 mm nominal size)& curing comp.

lnclud.cost of form work but exclu. Cost of reinforcement

for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

Item no.4, Page No. 43, GWSSB SOR 2022-23

ITEMS QTY. RATE Unit AMOUNT

Providing & fixing IS Mark TMT Bar FE 415 reinforcement for 0.00 73.21 Kg

R.C.C. work incl. bending, binding & placing in position

etc. comp. Upto G.L./P.L.

Item no 9.2, Page No. 45, GWSSB SOR 2022-23

Warning tape WARMAT ® Brand PE warning tape with Anti 300.00 31.25 Rmt

Rodent Properties ( Con Toxic, Non Hazardous Eco friendly

ROHS Compliance & 100% recyclable) Moc : LDPE, Roll

length : 250 Mtr, Color : Green, Text : Black / White, Length with

non deletable high abration.

(i) Size : 300 mm width x 100 Micron thk.

RAC Approved Rate

Providing & laying in trenches galvanised mild steel 200.00 282.18 Rmt

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE

of the following nominal

bore & tube fittings etc. comp..- 25mm.dia.

40 mm dia 50.00 425.33 Rmt

65mm dia 50.00 723.83 Rmt

Item No. 78, SMC SOR 2023-24

Providing mantaing upto the required period safe guarding 3510.00 12.05 Sqmt

lightening the excavated trenches with proper barricading,

fencing with timer balles, bamboos, G.I. sheets, red fiag and red

lights alongwith the provision of the chowkidars as

directed by Engineer-in-charge

SMC Approved Rate

Temporary diversion of sewage from House connection 150.00 44.64 Rmt.

chambers, Intermediate manholes and Tee chambers through

150 mm dia corrugated Hose pipe supported at suitable

distances from the side and conveying the sewage by gravity to the

downstream manhole.

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix

( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be

not less than 38 kg. On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single

(A) Same as above but Precast RCC heavy duty Cover 0.00 2681.76 No.

instead of C.I. Cover

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 0.00 242.39 Each

Item No. 76, SMC Housing SOR 2023-24

ITEMS QTY. RATE Unit AMOUNT

Removing of existing RCC pipeline incl. removal of

specials, valves jointing material including carting and

stacking of removed material frorr{ site of work to the

department store as directed excl. excavation and refilling. RCC/

Pre-Stressed concrete Pipes

Section 1G, Item No. 15.a, Page No. 81, GWSSB SOR

Providing, Laying and jointing on true line and level

UPVC pipe (SCH-40) line of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent

as approved by angineer-in-charge. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

15 mm Dia 100.00 72.65 Rmt

25 mm Dia 100.00 91.84 Rmt

40 mm Dia 25.00 148.12 Rmt

50 mm Dia 25.00 195.67 Rmt

Providing constructing brick masonry inlet chamber of

x 600 x 1500 mm internal dimension with necessary

excavation refilling 350 mm thick brick masonary in CM

1:4, 150 mm thick PCC and benching in CC 1:2:4, 12 mm

thick plaster in CM 1:3 for inside and cement pointing in

CM 1:3 for outside, providing and fixing pre-cast RCC

frame and cover of M-30 grade as per drawing and

specifications - Rate for 1.5 m depth. Add or ded. Rs.

for every 10 cm increase or decrease in depth 5.00 13548.00 No.

Providing, Supplying and fixing brass ferrule of approved

make of following sizes inclusive all taxes, insurance,

transportion, fright charge, inspection charge etc. complete

ITEMS QTY. RATE Unit AMOUNT

Providing, supplying, lowering and laying of DI K-9 pipes of 0.00 6977.75 Rmtr

following diameter with internal cement lining including all taxes,

fright, insurance, transportation, inspection charges octroi,

laoding, unloading, conveyance to site.

Puchasing, transporting, unloading, eretion RCC Sewer

machineholes using RCC M40 and steel reinforcement of

TMT FE-500 for following different sections for sizes of PVC

steps at site as per required depth including all materials

and taxes etc. complete (Excluding Machinhole

Conical chamber: section (height 1300mm as per drawing & 0.00 19819.25 No

design with 300mm c/c PVC step (300mm wide)

Base section with bottom (height 1500mm as per drawing & design 0.00 35842.84 No

with predefined opening for RCC pipe and 300mm

c/c PVC steps (300mm wide)

75 mm height Adjuster (560mm dia) 0.00 776.41 No

Frame 560mm dia (175mm height) 0.00 1242.44 No

150 mm height (PVC Step 1 nos.) 0.00 2841.76 No

300 mm height (PVC Step 1 nos.) 0.00 5347.53 No

600 mm height (PVC Step 2 nos.) 0.00 10744.41 No

900 mm height (PVC Step 3 nos.) 0.00 16117.56 No

Total A (For Drainage work)