REPAIR /REPLACEMENT TO ROOF SHEET, RAIN WATER PIPES, CHAJJA FACIA, PARAPET WALLS, ROOFING, WATER TANK CLEANING, BRICK WORK AND PLASTERING IN ZONE V UNDER AGE B/R-I AT GE (WEST) BAREILLY.

Amount

Demolition of brick work built in cement mortar complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floor and packing n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of Roof, floors (Other than ground floors ) beams, Staircase ,landing chajja, and similar suspended work in cement concrete is reinforforced complete all as specified and directed. (Note:-Reinforcement cut as required to facilitate demolition)

Taking down cement plaster from brick wall including racking out joints hacking for key and scrubbing down with water complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc ) sheets in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 Mtr mean radius built in CM (1:6) complete all as specified and directed.

Removing Cement mortar or cement lime mortarr from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed.

All as per item no 7 above but expect bricks complete all as specified and directed.

M & L Galvalised mild steel wire netting of chicken wire mesh 0.46 mm nominal dia of wire & 10 mm mesh size all as spd fixed to walls roof etc & directed by Engr-in-charge.

M&L for 15mm thick rendering on surfaces of brick work or stone walling in CM 1:6 finishing the surface fair & even complete all as specified and directed.

M&L for 15mm thick rendering on brick work or concrete surface in CM 1:4 mixed with WPC @ 2% by weight of cement finishing the surface fair & even complete all as spfd and directed. Note:- WPC shall be measured and paid saperately.

M&L for rendering 10 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement icomplete all as specified and directed

Supply only integral water proofing compound

M & L for preparation of newly plastered surfaces of wall and applying two coat white wash complete all as specified and directed

M&L two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces, complete all as specified and directed.

M & L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over & including a coat of white cement wash complete all as specified and directed.

M&L for preparation of plastered old surfaces of walls and applying two coats of distemper (washable) oil emulsion paint on walls complete all as specified and directed.

Cutting of tree from wall or roof of building n.exc 30 cm girth taking out tree trunk portion completely from wall/roof, digging out roof and making good distusbed surface with brick work in CM 1:4 or filling PCC 1:2:4 type B1 using 20mm add stone aggegate complete as directed by Engr in Charge. Note :- Roof is non accessible approx height ex. 4.00 m and n.exc. 8.00 m, so cost of Necessary scafolding shall be deemed to be included in the quoted rates

M&L providing PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed plates coping, padding complete all as spd & directed Note :- Roof is non accessible approx height ex. 4.00 m and n.exc. 8.00 m, so cost of Necessary scafolding shall be deemed to be included in the quoted rates

M&LCutting out cracks to 'V' section in existing roof or terraces cleaning out wetting groves and suppling and filling cement mortar in CM (1:3) complete as directed by Engr in Charge. Note :- Roof is non accessible approx height ex. 4.00 m and n.exc. 8.00 m, so cost of Necessary scafolding shall be deemed to be included in the quoted rates

M& L Screed bed 10mm thick in CM (1:4) over roof slab mixed with water proofing compound ( to be measured and paid separately ) as per manufacturer's instrutions finished even and fair complete as directed by Engr in Charge.

M & L for Providing and laying Smart care Damp Proof Ultra paint, a fibre reinforced elastomeric liquid applied water proofing membrane with resilient polymers having Sun Reflectivity Index (SRI) of 105. Forms a thick, seamless, durable membrane thus offering ultimate waterproofing with tensile strength of 2.9 mpa, elongation of more than 350% and resists upto 10 bars of water pressure when executed in 2-3 coats. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). including dismentling if existing roof treatement , Operation should be complete in all respect as per the direction of Engineer-in-Charge. Insert roof tape on all the corners omplete all as specified and directed.

M&L for water proofing treatment to roof including taking down old the existing roof treatment of any type and preparation of surface by proper cleaning and applying a priming coat of bitumen primer @ 0.30 ltrs/Sqm and applying a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm and supply & Laying ofAPP modified polymeric water proofing membrane 3 mm thick without comsidering mineral (weight not less than 3.50 Kg/Sqm )by LPG torch method over entire area with 100 mm overlapping and sealed and applying another coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm and applying two coat of aluminium paint @ 100 gm/Sqm on roof over roof treatment or vertical surface including dismantling of old APP Membrane from roof complete all as specified & directed. Note :- Roof is non accessible approx height ex. 4.00 m and n.exc. 8.00 m, so cost of Necessary scafolding shall be deemed to be included in the quoted rates

Dismantling, taking out & removing existing unserviceable plaster, loose/unsound weaken cement concerete etc M&L for applying one coat of epoxy resin (FAIR BOND EP FAIR BOND EP of Fairmate Constructions Chemical or equivalent as approved by GE) on old concrete surfaces of ceiling and beams, chhajja, stair case etc. @ 0.30 Kg/Sqm including preparation of surfaces as per manufacturer's instructions complete and applying 25mm thick (average thickness) of cement and sand (Fine grit) in ratio 1:3 mixed with chloride free spray concrete plastriciser (Spray crete or equivalent as approved by GE) as per manufacture instruction with guiniting machine of presser capacity not less than 5 Kg per sqcm and finished the surfaces even and smooth complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregate ) as in foundation filling & mass concrete complete all as spd and directed

M & L for Cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate , in flinth protection 50mm thick finished even and smooth without using extra cement including making joint 12 wide to the full depth of PCC at every 3 mtrs and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as spd and directed

M & L Proviiding 100mm thick Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface finishing cement concrete surface even and smooth complete all as spd and directed

M & L for Forming construction joints 20mm deep x 10mm vide filled with sealing compound grade "A" complete all as spd and directed

M & L PCC (1:3:6) type B-1(using 20mm graded stone aggregate) as in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete , using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed

Add to or deducted in Srl Item No 31above for each 25mm grith or part thereof over or under 30cm complete all as specified and directed

M & L for Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete gde Fe-410-W or GDe250-A quality complete all as specified and directed

S&F wind ties for roof incl securing bolts, including all necessary drilling, bolting or riveting, etc complete all as specified and directed

S & F 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed L type or J type Hooks complete all as specified and directed

All as per item no 36 above but expect sheets complete all as specified and directed

M & L asbestos cement 6 mm thick two Pices adjustable plain wing Ridge fixed with L type or J type hooks. complete all as specified and directed

S& F Pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws as spd complete all as specified and directed

S& F Pre -painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws as complete all as specified and directed

M&L Plain Cement concrete 1:2:4 type B-0 using 12.5 mm greded stone aggregate in levelling course ,benching etc ,finished even & complete all as specified and directed

Dismantling timber scantlings 40 sqcm and over in section if any position complete all as specified and directed

M&L for 2nd class H.W clean swan in timber scantlings all as spd and directed by Engr-in-charge.

M & L for Preparing surfaces of wood & wood based materials old surfaces of any description and girth applying two coat of cresoting complete all as specified and directed.

M & L Reinforced Cement Concrets type B -1 1:2:4 (using 20 mm graded stone aggregate) as in Chajjas, shelves etc. complete all as specified and directed

M&L for existing kota stone floor pointed with pigments to match the shade of the slab includding rubbing and wax polishing complete all as specified and directed

M & L for Mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

M & L Form work to chullah hoods, shelves, chajjas, through and similar items including edges in flat surfaces for rough finish surfaces complete all as specified and directed

Taking up or down 15 mm steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore dia of pipe complete all as specified and directed

Dismantling & breaking up drains pipes 100 / 75 mm (Saltglaged ware, AC, PVC) Set in cement mortar complete all as specified and directed

S & F PVC (SWR) pipes double socketed in any length with rubber Ring joints fixed to walls 110 mm bore fixed complete all as specified and directed

S & F PVC (SWR) pipes double socketed in any length with rubber Ring joints fixed to walls 75 mm bore fixed complete all as specified and directed

S & F in repair PVC (SWR) bends any radius 110 mm bore fixed complete all as specified and directed

S & F in repair PVC (SWR) bends any radius 75 mm bore fixed complete all as specified and directed

S & F in repairs PVC (SWR) juntion single T equal or unequal 110 mm bore fixed complete all as specified and directed

S & F in repairs PVC (SWR) juntion single T equal or unequal 75 mm bore fixed complete all as specified and directed

S & F in repairs PVC (SWR) vent cowl 110 mm bore fixed complete all as specified and directed

S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including Powder coated Aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

M&L for 400x400 mmx ( 10 to 12 mm thick ) out door vitrified anti skid coloured tiles in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM-1:6, including dismantling of existing tiles complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of Cement based paint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling dipression surface with putty and applying one coats of oil bound distemper of approved shade/tint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of white wash complete all as specified and directed.

S & F 1000 Ltr white Color Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 500 but n exc. 1000 litre complete all as specified and directed.

S & F 500 Ltr white Color Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed.

S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 mm - 210 gms) complete all as specified and directed.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

RIYASAT ALI KHAN (BID ID -3387943)

hardeep singh enterprises (BID ID -3388120)

SHRI BALA JI STORE (BID ID -3384575)

M/S Alam Construction Co (BID ID -3392892)

multiple alliance enterprises (BID ID -3386792)