REPAIR TO LT CABLE, PANELS AND JOINTS IN DOMESTIC AREA, SITE 1A AND 1B AT AF STATION JODHPUR

Amount

Material & labour in repairs earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth strip 25mm x 4 mm, by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 40 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. NOTE :- The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI strip beyond 7.5 Metre shall be measured and paid for separately.

Material & labour in replacement for out door type LT Feeder Pillar box (Kiosk) of size not less than (L) 60 cm x (W) 45 cm x (H) 45cm made out of 3.15 mm thick CRCA sheet (CPRI approved) with openable Front door including locking arrangement, with and inluding Copper Busbar 200 amps rating and one MCCB 100 Amps, 25 KA and fixed on angle iron frame made out of 45mm x 45mm x 5mm as in legs 15 cm high above ground level and 30 cm above ground level and embedded in PCC block made of PCC 1:3:6 type C-2 complete all as specified and directed by the Engineer in Charge.

Supply, laying, jointing, testing and commissioning of Aluminium conductor Cable multi stranded XLPE insulated and PVC sheathed, armoured electric power cables heavy duty, 1100 volts grade, cross sectional area 95 sqmm 3.5 core laid in trenches/ fixed on walls/ floor/ road / culverts/ poles or encased in GI pipe with root marking complete all as specified and directed by the Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning of Aluminium conductor Cable multi stranded XLPE insulated and PVC sheathed, armoured electric power cables heavy duty, 1100 volts grade, cross sectional area 120 sqmm 3.5 core laid in trenches/ fixed on walls/ floor/ road / culverts/ poles or encased in GI pipe with root marking complete all as specified and directed by the Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning of Aluminium conductor Cable multi stranded XLPE insulated and PVC sheathed, armoured electric power cables heavy duty, 1100 volts grade, cross sectional area 185 sqmm 3.5 core laid in trenches/ fixed on walls/ floor/ road / culverts/ poles or encased in GI pipe with root marking complete all as specified and directed by the Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning of Aluminium conductor Cable multi stranded XLPE insulated and PVC sheathed, armoured electric power cables heavy duty, 1100 volts grade, cross sectional area 240 sqmm 3.5 core laid in trenches/ fixed on walls/ floor/ road / culverts/ poles or encased in GI pipe with root marking complete all as specified and directed by the Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning of Aluminium conductor Cable multi stranded XLPE insulated and PVC sheathed, armoured electric power cables heavy duty, 1100 volts grade, cross sectional area 25 sqmm 4 core laid in trenches/ fixed on walls/ floor/ road / culverts/ poles or encased in GI pipe with root marking complete all as specified and directed by the Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning of Aluminium conductor Cable multi stranded XLPE insulated and PVC sheathed, armoured electric power cables heavy duty, 1100 volts grade, cross sectional area 16 sqmm 4 core laid in trenches/ fixed on walls/ floor/ road / culverts/ poles or encased in GI pipe with root marking complete all as specified and directed by the Engineer-in-Charge. Note for Ser Item no 03 to 08:- (i) Sand cushionig, cable protection, GI protection pipe, clamps, testing kits, excavation and earthwork shall be measured and paid seperately.

Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth for foundation etc or for laying of cables, struts / stays etc not exceeding 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed by the Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed by the Engineer-in-Charge.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete all as specified and directed by the Engineer-in-Charge.

Material & labour for sand cushioning for PVC cable with tibba sand (one layer of 80 mm thickness before laying of cable and other layer of 150 mm thickness after laying of cable) & punning down to 180 mm to provide a required cover complete all as specified and directed by the Engineer-in-Charge. Note:- Punned thickness only shall be measured and paid.

Material & labour for Laying 40 to 50 mm thick rough dressed Jodhpur type stone slab cover 25 to 30 cm wide and not less than 50 cm in length retreived from excavation, laid dry abutting each other for protection of cable complete all as specified and directed.

Material & labour for boring of horizontal holes under road pavement, hard standing manually including supply and fixing 80mm bore light grade GI pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement PVC cable Junction box of size 300mm x 300mm x 150mm, for street light, including one 6 Amps MCB SP with aluminium bus bar TPN for controlling the Street Lights complete, including mounting the junction box on pole with MS clamps, nuts & bolts complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in replacement 50mm bore light grade GI pipe for cable protection, fixed on walls including all required fittings and fixtures complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement PVC insulated copper conductor cable of 2.5 sqmm 2 core multistranded for connection from street light to junction box complete all as specified and directed by Engineer-in-charge.

Supply and fixing steel tubular swaged poles type 410 SP-31, 9 metres long complete with CI base plate and final including top cover bracket of required size, painting to the complete pole with two coats of synthetic enamel paint, over one coat of primer complete including zebra painting, numbering the poles with synthetic enamel paint including taking down old unserviceable pole any type complete all as specified and directed by the Engineer-in-Charge.

Dismantling & taking down the old unserviceable existing LT panel board and Supply, installation, Commissioning and testing LT panel board, floor mounted, double door, outdoor cubical type, dust and vermin proof, protection class IP-65, 415 V, 50 Hz, 3 phase, 4 wire, aesthetically designed, manufactured by CPRI and ISO certified manufacturer, painted externally and internally with nine tank process, fabricated out of 3.15 mm thick outer CRCA sheet and 2 mm thick inner CRCA sheet, depth of panel not less than 45 cm, with front and rear opening conforming to IS 8623, and including of bus bar chamber continuous GI strip earth bus bar din rail channel cable alley, danger notice plate, 40mm x 40mm x 6mm angle iron frame with two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete, panel to be fixed 300 mm above ground level and 300 mm below ground level including all necessary excavation and PCC work in 1:4:8 type D2, complete with locking arrangement, connectinons of the incoming and outgoing with FRLS copper conductor cables of suitable size and fixing the cable with the panel using new lugs and cable glands of suitable size complete all as specified and directed by the Engineer-in-Charge comprising of the following complete :-

Item Ser No 19.00 Contd… (a) Copper bus bar of size 40 mm x 6mm mounted on PVC insulators- 04 strips (b) Phase indicating lamps LED type (RYB) - 3 Nos (c) Multi functional digital type meter for measuring ampere, voltage, frequency etc- 01 No (d) MCCB, 125 Amps, 415 V, 50 Hz AC, 25 KA, 4 pole with thermal and magnetic release adjustable ICs=ICu 100 % - 01 No for incoming. (e) MCB 40 Amps 04 pole - 05 Nos for outgoing Note:- The rate quoted shall deemed to be included for necessary internal wiring with copper conductor of suitable size as per manufacturer's instructions.

Dismantling & taking down the old unserviceable existing LT panel board and Supply, installation, Commissioning and testing LT panel board floor mounted, double door, outdoor cubical type, dust and vermin proof, protection class IP-65, 415 Volts, 50 Hz , 3 phase, aesthetically designed, manufactured by CPRI and ISO certified manufacturer, painted externally and internally with nine tank process, fabricated out of 3.15 mm thick outer CRCA sheet and 2 mm thick inner CRCA sheet, depth of panel not less than 45 cm, with front and rear opening conforming to IS 8623, and including of bus bar chamber continuous GI strip earth bus bar din rail channel cable alley, danger notice plate, 40mm x 40mm x 6mm angle iron frame with two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete, panel to be fixed 300 mm above ground level and 300 mm below ground level including all necessary excavation and PCC work in 1:4:8 type D2, complete with locking arrangement, connectinons of the incoming and outgoing with FRLS copper conductor cables of suitable size and fixing the cable with the panel using new lugs and cable glands of suitable size complete all as specified and directed by the Engineer-in-Charge comprising of the following complete :

Item Ser No 20.00 Contd… (a) Copper bus bar of size 40 mm x 6mm mounted on PVC insulators- 04 strips (b) Phase indicating lamps LED type (RYB) - 3 Nos (c) Multi functional meter for measuring ampere, voltage, frequency etc- 01 No (d) MCCB, 200 Amps, 25 KA, 415 V, 50 Hz AC, 4 pole with thermal and magnetic release adjustable ICs=ICu 100 % - 01 No for incoming. (e) MCCB, 63 Amps, 25 KA, 415 V, 50 Hz AC, 4 pole with thermal and magnetic release adjustable ICs=ICu 100 % - 03 Nos for outgoing. (f) MCB 40 Amps 04 pole - 03 Nos for outgoing. Note:- The rate quoted shall deemed to be included for necessary internal wiring with copper conductor cable of suitable size as per manufacturer's instructions.

Taking down overhead Aluminium conductor steel reinforced (ACSR) any size/type from overhead lines, poles by removing binding wires, service wires, cables etc complete all as specified and directed by the Engineer-in-Charge.

Taking down LT pin and loop insulators any type from poles complete all as specified and directed by the Engineer-in-Charge.

Taking down old unserviceable MS cross arms, clamps etc from poles complete all as specified and directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by the Engineer-in-Charge.

Material & labour for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in foundation, sub base filling and mass concrete including necessary formwork etc complete all as specified and as directed by the Engineer - in - Charge.

Material & labour for cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregates) as in coping including necessary formwork etc complete all as specified and as directed by the Engineer - in - Charge.

Material & labour for disconnecting and taking down existing security light, cross arms, GI pipe bracket and other accessories from any type of pole and refixing the same on new pole, connecting to supply and making it fully functional upto the entire satisfaction of Engineer-in-Charge.

Attending day to day street / security light complaints received through telephone or in person, identification and rectification of defects by bringing down the fittings on ground or in position including replacement of drivers, Surge Protection Device (SPD), cleaning of glass/acrylic cover for clear reflection of light, jumper fixing, tightening of loose connections, GI bracket tightening, checking the connection of FRP junction box, light alignment etc replacement of service connection cable and connections complete all as specified & directed by the Engineer-in-Charge. Note :- (i) Replacement of unserviceable items shall be measured and paid for seperately as 'Supply only in replacement' under srl item no.29 to 34 of this BoQ . (ii) contractor shall provide/depute sufficient number of electricians and helpers (as directed by Engineer-in-charge) to attend the complaints and rectified the same within 04 hours of receipt of complaints. (iii) contractor manpower shall attend daily to recieve complaints at complaint cell at 9.00 AM from JE E/M and report after completion of complaints and handover a complaint slip to JE E/M with user signature as a record of attending the complaints for payment purposes. (iv) Vehicle, ladder, tools, LT tapes and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement. (v) Any complaint/job given on a particular day shall be repaired/rectified within four hours on the same day. The rate of recovery against non attending/completing job on same day shall be Rs. 75/- per complaint per day. (vi) Old retrieved material shall be deposited in AGE E/M yard and shall be given to contractor after completion of contract.

Supply only in replacement 6 Sqmm 2 core, LT 1100 volts grade weather proof, PVC insulated and PVC sheathed, multi stranded aluminium conductor cable, flat type, in service connections etc complete all as specified & directed by the Engineer-in-Charge.

Supply only in replacement electric driver for 50 Watt LED type light fitting complete all as specified and directed by the Engineer-in-Charge.

Supply only in replacement electric driver for 75 Watt LED type light fitting complete all as specified and directed by the Engineer-in-Charge.

Supply only in replacement electric driver for 100 Watt LED type light fitting complete all as specified and directed by the Engineer-in-Charge.

Supply only in replacement electric driver for 150 Watt LED type light fitting complete all as specified and directed by the Engineer-in-Charge.

Supply only in replacement surge arrestor of 5KV/10KV for LED type fittings complete all as specified and directed by the Engineer-in-Charge.

Attending day to day complaints of existing 12 m high highmast light (of any type, make and wattage) received through telephone or in person, identification and rectification of defects by bringing down the fittings on ground or in position including replacement of flexible wire, replacement of old unserviceable light fittings, cleaning of glass/acrylic cover for clear reflection of light, jumper fixing, tightening of loose connections, GI bracket tightening, checking the connection of FRP junction box, light alignment etc, properly insulating the connections complete all as specified & directed by the Engineer-in-Charge. Note :- (i) Replacement of unserviceable items shall be measured and paid for seperately as 'Supply only in replacement' under srl item no. 29 to 34 of this BoQ . (ii) contractor shall provide/depute sufficient number of electricians and helpers (as directed by Engineer-in-charge) to attend the complaints and rectified the same within 04 hours of receipt of complaints. (iii) contractor manpower shall attend daily to recieve complaints at complaint cell at 9.00 AM from JE E/M and report after completion of complaints and handover a complaint slip to JE E/M with user signature as a record of attending the complaints for payment purposes. (iv) Vehicle, ladder, tools, LT tapes and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement. (v) Any complaint/job given on a particular day shall be repaired/rectified within four hours on the same day. The rate of recovery against non attending/completing job on same day shall be Rs. 75/- per complaint per day. (vi) Old retrieved material shall be deposited in AGE E/M yard and shall be given to contractor after completion of contract.

Supply only in replacement LED street light fitting 70 Watt with IP 66 protection and impact resistance of IK-07, 230 Volts, made up of pressure die cast aluminium housing with high efficient LED as lighting source, heat resistance toughned glass with frame, potted driver & all connected acessories complete all as specified and directed by the Engineer-in-Charge.

Supply only in replacement LED street light fitting 90 Watt with IP 66 protection and impact resistance of IK-07, 230 Volts, made up of pressure die cast aluminium housing with high efficient LED as lighting source, heat resistance toughned glass with frame, potted driver & all connected acessories complete all as specified and directed by the Engineer-in-Charge.

Supply only in replacement LED street light fitting 150 Watt with IP 66 protection and impact resistance of IK-07, 230 Volts, made up of pressure die cast aluminium housing with high efficient LED as lighting source, heat resistance toughned glass with frame, potted driver & all connected acessories complete all as specified and directed by the Engineer-in-Charge.

Shri Electrical Enterprises

M/s R K Enterprises