EOT/W/26-27/000105

SUPPLYING BUBBLE FREE FLOAT GLASS OF APPROVED MAKE AND BRAND CONFORMING TO IS: 2835-1987. PART(II) Float glass of approved make

SUPPLYING BUBBLE FREE FLOAT GLASS OF APPROVED MAKE AND BRAND CONFORMING TO IS: 2835-1987; CLEAR, TOUGHENED GLASS CONFORMING TO IS: 2553-1992 (PART-II) 6 MM THICK Float glass of approved make 6mm Thick

SUPPLYING GLAZING SILICON OF APPROVED MAKE AND BRAND FOR FIXING OF GLASS ON SUB-FRAME AS PER DIRECTION OF ENGINEER-IN-CHARGE FOR STRUCTURAL GLAZING/CURTAIN WALL ETC. GLAZING SILICON FOR FIXING GLASS ON SUB FRAME Glazing Silicon of approved make

SUPPLY AND AFFIXING OPTICALLY CLEAR POLYESTER SUN CONTROL WINDOW FILM HAVING ACRYLIC PRESSURE SENSITIVE ADHESIVE ON ONE SIDE & AN ACRYLIC ABRASION RESISTANT COATING ON THE OTHER, WITH COMPOSITION OF INFRARED ABSORBING CARBON & FREE FROM ANY OPTICAL DEFECT. THE FILM CHARACTERISTICS SHOULD CONFORM TO ASTM E308, ASTM E903, ASTM E84 AND ASHIRAE. THE FILM SHOULD BE PASTED AFTER PREPARATORY WORKS WITHOUT ANY CRACKING, DELAMINATION, BUBBLING, DISCOLOURING AND VARIATION IN TOTAL TRANSMISSION OF LIGHT ACROSS THE WIDTH AT ANY PORTION ALONG THE LENGTH DOESN'T EXCEED 2% OVER THE AVERAGE INCLUDING SCAFFOLDING & RELEVANT OTHERS TO COMPLETE IN ALL RESPECT AS PER MANUFACTURER'S SPECIFICATION & DIRECTION OF ENGINEER - IN-CHARGE. (NOTE: THIS WORK SHOULD NOT BE EXECUTED WITHOUT SPECIFIC PERMISSION OF SUPERINTENDING ENGINEER) NORMAL QUALITY : FILM THICKNESS - 1.0 MIL, GLARE REDUCTION > 45%, U FACTOR < 1.15 Optically clear polyester sun control window film

SUPPLYING AND LAYING TRUE TO LINE AND LEVEL VITRIFIED TILES OF APPROVED BRAND (SIZE NOT LESS THAN 600 MM X 600 MM X 10 MM THICK) IN FLOOR, SKIRTING ETC. SET IN 20 MM SAND CEMENT MORTAR (1:4) AND 2 MM THICK CEMENT SLURRY BACK SIDE OF TILES USING CEMENT @ 2.91KG./SQM OR USING POLYMERISED ADHESIVE (6 MM THICK LAYER APPLIED DIRECTLY OVER FINISHED ARTIFICIAL STONE FLOOR/MOSAIC ETC WITHOUT ANY BACKING COURSE) LAID AFTER APPLICATION SLURRY USING 1.75 KG OF CEMENT PER SQM BELOW MORTAR ONLY, JOINTS GROUTED WITH ADMIXTURE OF WHITE CEMENT AND COLOURING PIGMENT TO MATCH WITH COLOUR OF TILES / EPOXY GROUT MATERIALS OF APPROVED MAKE AS DIRECTED AND REMOVAL OF WAX COATING OF TOP SURFACE OF TILES WITH WARM WATER AND POLISHING THE TILES USING SOFT AND DRY CLOTH UPTO MIRROR FINISH COMPLETE INCLUDING THE COST OF MATERIALS, LABOUR AND ALL OTHER INCIDENTAL CHARGES COMPLETE TRUE TO THE MANUFACTURER'S SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE. (WHITE CEMENT, SYNTHETIC ADHESIVE AND GROUT MATERIAL TO BE SUPPLIED BY THE CONTRUCTOR WITH APPLICATION SLURRY @1.75 KG/ SQ.M, 20 MM SAND CEMENT MORTAR (1:4) & 2 MM THICK CEMENT SLURRY AT BACK SIDE OF TILES, 0.2 KG/ SQ.M WHITE CEMENT FOR JOINT FILLING WITH PIGMENT. LIGHT COLOUR Level vitrified tiles of approved brand

LABOUR CHARGE FOR FABRICATION AND INSTALLATION OF COMPOSITE DOOR, WINDOW, PARTITIONS MADE FROM ANNODIZED EXTRUDED ALLOY ALUMINIUM SECTIONS FOR THE FOLLOWING UNITS:- GLAZED ALUMINIUM SLIDING WINDOWS MADE OF EXTRUDED AND ANNODIZED ALLOY ALUMINIUM SECTIOS, FABRICATIONS, INCLUDING CUTTING TO PROPER SHAPE AND SIZE, DRILLING AND ALIGNING OF WINDOW SHUTTER FRAME FITTED WITH IN BUILT LOCKING ARRANGEMENTS, SLIDING ROLLERS AND OTHER NECESSARY FITTINGS, FIXTURE, ADHESIVES AND JOINERIES ALONG WITH EXTRUDED NEOPRINE OR EPDM GASKETING IN BETWEEN WINDOW FRAME AND MASONRY WORK (WALLS, COLUMN, BEAM.LINTELS ETC.) AS WELL AS BETWEEN GLASS AND SHUTTER FRAME FOR FIXING GLASS AND POLYSULPHIDE SEALANT AND IN BETWEEN SHUTTER AND WINDOW FRAME WHERE NECESSARY INCLUDING CUTTING TO REQUISITE SIZE AND FIXING GLASS AS PER DRAWING, SPECIFICATION AND DIRECTION OF EIC. THE RATE INCLUDES THE HIRE CHARGE OF ALL TOOLS AND PLANTS, INCLUDING ALL INCIDENTAL CHARGES, ADHESIVE, JOINERIES SUCH AS SCREW, CLEAT ANGLE ETC. BUT EXCLUDING THE COST OF EXTRUDED ALUMINIUM SECTIONS, GLASS, NEOPRENE / EPDM GASKET, LOCKING ARRANGEMENT AND ROLLERS. OPENABLE / CASEMENT WINDOW. Labour charge

LABOUR CHARGE FOR FABRICATION AND INSTALLATION OF COMPOSITE DOOR, WINDOW, PARTITIONS MADE FROM ANNODIZED EXTRUDED ALLOY ALUMINIUM SECTIONS FOR THE FOLLOWING UNITS:- FULLY GLAZED SINGLE LEAF REAMLESS SWING DOOR MADE OF ANODIZED ALUMINIUM ALLOY EXTRUSIONS FABRICATION AFTER CUTTING TO PROPER SHAPE AND SIZE, DRILLING AND ALIGNING FITTED WITH HEAVY DUTY HYDRAULIC ACTION FLOOR SPRING WITH TOP PIN ASSEMBLY AND FITTED WITH INBUILT LOCKING ARRANGEMENT AND ALL OTHER NECESSARY FITTINGS, FIXTURE, ADHESIVES AND JOINERIES, CUTTING THE GLASS TO REQUISITE SHAPE AND SIZE MOUNTING THE EDGES FOR FITTING THE SAME WITH DRY SET NEOPRINE/EPDM GASKET. THE RATE INCLUDES THE HIRE CHARGE OF ALL TOOLS AND PLANTS, ADHESIVE, JOINERIES BUT EXCLUDES THE COST OF EXTRUDED ALUMINIUM SECTIONS, GLASS, PANEL BOARDS EPDM GASKET, LOCKING ARRANGEMENT, WEATHER GASKET / WOOL PILE, FLOOR SPRING, TOP PIN, HANDLE, TOWER BOLT Labour Charge

SUPPLYING SOLID FLUSH TYPE DOORS OF COMMERCIAL QUALITY, THE TIMBER FRAME CONSISTING OF TOP AND BOTTOM RAILS AND SIDE STYLES OF WELL SEASONED TIMBER 65MM WIDE EACH AND THE ENTIRE FRAME FITTED WITH 37.5MM WIDE BATTENS PLACES BOTH WAYS IN ORDER TO MAKE THE DOOR OF SOLID CORE AND INTERNAL LIPPING WITH GARJAN OR SIMILAR WOOD VENEERS USING PHENOL FORMALDEHYDE AS GLUE ETC. COMPLETE, INCLUDING FITTING, FIXING SHUTTERS IN POSITION BUT EXCLUDING THE COST OF HINGES AND OTHER FITTINGS IN GROUND FLOOR, 35 MM THICK SHUTTERS (SINGLE LEAF) 35 mm thick shutters (single leaf)

TAKING OUT SHUTTER OF DOOR AND WINDOW, DISMANTLING BY PARTS (FOR REPAIR OR REPLACEMENT OF DAMAGED PARTS) , REASSEMBLING AND REFITTING AND REHANGING SAME WITH OLD FITTINGS BUT WITH NEW SCREWS AS NECESSARY. (WHERE DIFFERENT PARTS OF SAME SHUTTER ARE RENEWED UNDER DIFFERENT ITEM, PAYMENT UNDER ITEM 73 WILL BE MADE ONCE ONLY). Repair or replacement of damaged parts