REPAIRS TO FLOORING AT VARIOUS LOCATIONS OF ZONE A AND B AREA UNDER GE (ARMY) TRIVANDRUM

Amount

Demolition of cement concrete (unreinforced) including tiles and screed bed of any description in any position not otherwise specially provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in sub-base for flooring/ levelling coarse, sunken floor etc. complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floor/ steps etc. set and jointed in neat cement slurry and pointed with coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300 x 200 x 7mm / 450 x 300 x 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed in cement mortar 1:3 complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in vertical surfaces (dado/ skirting) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified ceramic (light shade) tiles 10mm thick (square / rectangular) polished, area of each tiles exceeding 0.36 sqm, in floors etc, set and jointed neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for vitrified ceramic (light shade) tiles 10mm thick (square / rectangular) polished, area of each tiles exceeding 0.36 sqm, as in vertical surfaces (dado/ skirting) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed in cement mortar 1:4 complete all as specified and as directed.

M&L for 100mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in sub-base of floor, etc. complete all as specified and directed.

M&L for chequered cement concrete tiles of size 400x400x25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Demolition of brick work/ PCC block/ stone wall masonry built in cement mortar and removing the debris/ rubbish to a distance not exceeding 100 mtr complete all as specified and directed.

M&L for pre-cast cement concrete block masonry type C1, 1:3:6 using 20mm graded stone aggregate with solid blocks exceeding 10 cm in width and setting in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on fair faces of brick work/ concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate as in plinth protection, hard standing, etc. finishing surface even and smooth without using extra cement complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same opening after necessary easing and adjusting complete all as specified and as directed.

Taking up or down 15mm bore steel/ 16mm bore PVC tubing and connections, and refixing the same in new or old position (Walls, ceiling, flooring etc.) including cleaning complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M/S Vadakkeparambil Electro-Mechanic Service

VIJAYA ENTERPRISES

DJ GROUP

M/s G.Ramachandran

JEETH CONSTRUCTION

mahadeva traders cotractor and suppliers

SHILPA ENGINEERS AND CONTRACTORS

JESWIN BUILDERS