TN No. 122/2_Repairs/Renovation and Construction of Khoirabari Circle Office at Khoirabari in Udalguri District.

Amount

Reparing of Revenue Circle Office Building 13.1.1. (a) Removing white or colour wash by steel wire brushing and or scraping, sand papering and preparing etc. Wall

23.15. Demolishing C.C. floor of various thickness including top layers and base course and disposal etc., Room, Varandah, Toilet

4.1.1. Providing soling in foundation and under floor with Bast quality pick Jhama Brick etc.

2.1.2. Plaun Cement concrete floor base in prop. 1:3:6 etc.

9.1.2. Providing wood work in frame (Chowkath) of door, window, C/window (b) With Hollock/Bonsum, Chokath

9.3.1. Providing wood work in frame in false ceilling, partition wall etc. (b) With Hollock/Bonsum. Room

7.9.1. Providing, fitting & fixing hard board sheet ceiling etc. Ceiling, Verandah

9.4.1. Providing barge board of size 200mm X 20mm with 1st class local Hollock/Bonsum etc.

6.2.2. 15mm thick cement plaster in single coat on (A) Fair side in Prop. 1:4

5.7.2.1. Providing Vitrified floor Tiles of approved quality, size, shape etc. (a) Nominal range (Somany/Orient/Nitco) etc.

5.7.2.2. Providing polished VITRIFIED wall Tiles of approved quality, size, Shape and thickness not less than 8mm on floor, skirting etc. (i) Of size (size 300mm X 450mm and above) Wall

19.2. Providing plinth protection with brick flat laid in cement mortar 1:4 and finished with 15mm etc.

19.5. Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) etc.

9.9.3. Providing fitting and fixing full paneled door, windows incl. oxidized MS bolts hings etc. (b) With 1st class local wood (Hollokh/Bansum) (i) 40mm thick

9.9.7. Providing fittin and fixing fully glassed….window, etc. (c ) With Hollokh/Bansum (i) 40mm thick

9.9.9. Providing fitting and fixing fully glassed clearstory window, etc. (c ) With Hollokh/Bansum (i) 40mm thick

16.1. Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bedings etc. (2) Area of glass panes existing 0.15 m2 (b) 4.00mm thick

15.2.1. Supplying, fitting, fixing anodized aluminum fittings approved Make, seasonably smooth, free from sharp edges and corners with counter sunk holes for screws etc. (a) Sliding door bolt (i) 300mm X 16mm..............6 nos

(b) Tower bolts (ii) 250mm X 12mm…. 34 nos

( C) Door handles (iii) 150mm

13.6.3. Applying primary coat over new wood and wood based surface over 10mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (white)

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (b) General purpose (Asian paint/Nerolac paint/ J &N paint)

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint of approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac), Wall

SANITARY WORKS 1.37.1. Supplying, fitting and fixing PVC pipes of 6 Kgf/cm2 (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. a) In exposed surfaces or in trenches. (ii) 110 mm dia

(iv) 75mm dia.

1.37.2. Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches. (ii) 110mm dia

(iv) 75mm dia.

1.39. Providing, fitting and fixing 75mm dia, PVC cowel of ISI make complete as directed and specified.

1.52. Construction of inspection pit inside measurement 450mm X450mm flush with 100mm dia. HCI/PVC pipes and cement concrete base in prop. 1:3:6 over flat brick soiling etc.

1.51. Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the Trench with brick bats/charcoal with earth over a Layer of A.C. plain sheet etc.

2.1.1. Clearance of service septic tank and removing the night soil and debris etc. manually from the tank/chamber to a distance etc. © For 50 users.

Construction of Cycle Stand 1.1. Earth work in excavation for foundation trenches of walls, relating walls, footing of column, steps septik etc. (A) Up to a depth of 2m below the existing G.L. (a) In ordinary soil.

4.1.1. Providing soiling in foundation and under floor with Stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling. Post, Wall

2.1.1. Plain cement concrete work with coarse agg. Of size 13mm to 32mm in foundation bed for flooring step wall etc. (a) In prop. 1:3:6, Post, Ramp

18.1.1. Supplying fitting and fixing in position reinforcement bars Conforming to relevant IS code etc. (b) Other ISI approved T.M.T. reinforcement bar (SRMB/BISCON/X TECH) (For Assam Type Bldg. drain, boundary wall etc) 12mm dia.

( C) ISI approved MS road 6mm dia, Post

3.2.1. Providing from work of 12mm thick Plywood Board so asto give a rough finish incl. centering shuttering etc. 3.2.1.2. Column, pillars, posts & strut of square/rectangular etc. (ii) Using 25mm thick plank

3.2.1.2. Sides and soffits of Beam, beam hanching, bressumers, lintels etc.

2.2.1. Providing and laying plain/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (I) using Mixer Machine (a) In substructure up to P.L. foundation, footing, column with base tie and plinth beam etc. (N) Without using admixture, plasticizer. (b) M 20 grade concrete or Prop. 1:1.5:3

(b) In substructure from PL upto 1st floor level. (ii) Colomns, pillars, post, struts, suspended floor, (N) Without using admixture, plasticizer. (A) M 15 grade concrete or Prop. 1:2:4

4.1.4. Brick work in cement mortor with 1st class brick incl. racking out joints and dewatering etc. etc. in sub structure. ( C) In prop. 1:5

1.3. Earth/sand filling in plinth in layers not more than 150 thick inh. Necessary carriage watering, remming etc. (A) With silt (Predominantly non plastic) by thick curing including loading and unloading.

2.1.3. Providing and laying 25mm thick damp roof course with Cement concrete in prop. 1:1.5:3 etc.

4.1.8. 112mm thick 1st class brick nogged wall in cement mortar in racking out joint and curing complete above PL up to 1st floor level. (a) In prop. 1:4

18.3.1. Providing fitting, hosting and fixing of roof trust incl. Purlin fabricated out of MS black tube conforming to relevant IS code as per approved design etc.

8.1.1. Providing corrugated galved Iron sheet roofing of TATA Shaktee/SAIL incl. fitting and fixing necessary Galved etc. (D) 0.63mm thick

9.4.1. Providing barge board of size 200mm X 20mm with 1st class local Hollock/Bonsum etc.

6.2.3. 15mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level etc. (A) On Rough side (b) In prop. 1:4

(B) On fair side (b) In prop. 1:4

5.1.10. Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement etc. (a) 15mm thick

5.1.4. 65mm thick cement concrete floor consisting of 50 mm under Layer of cement concrete in prop 1:3:6 and 15 mm thick wearing Layer in cement concrete ip prop 1:1:2 etc.

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint of approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/ Nerolac) Wall

13.9.1. Finishing old/new wall with waterproofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade etc. Wall

13.6.3. Applying primary coat over new wood and wood based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink)

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (b) High gloss (Asian paint/Nerolac paint/J&N paint)

Construction of Godown Building. 1.1. Earth work in excavation for foundation trenches of walls, relating walls, footing of column, steps septic tank etc. (A) Up to depth of 2m below the existing G.L. (a) In ordinary soil. Post, Wall

4.1.1. Providing soiling in foundation and under floor with Stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling. Post, Wall

2.1.1. Plain cement concrete work with coarse agg. Of size 13mm to 32mm in foundation bed for flooring step wall etc. (a) In prop. 1:4:8, Post, Ramp

18.1.1. Supplying fitting and fixing in position reinforcement bar conforming to relevant I.S. code etc. (a) Other ISI approved T.M.T. reinforcement bar (SRMB/BISCON/ X TECH) (For Assam Type Bldg, drain, boundary wall etc.) 16mm dia, Post

(C ) ISI approved MS road, 6mm dia

3.2.1. Providing from work of 12mm thick Plywood Board so asto give a rough finish incl. centering shuttering etc. 3.2.1.1. Column, pillars, posts & strut of square/rectangular etc. Base, Col, Post

3.1.1.2. Sides of tie beam, plinth beam, grade beam etc.

3.3.1.3. Flat surface such as soffits of suspended floor, roof chajja, slab, etc.

2.2.1. Providing and laying plain/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (I) using Mixer Machine (A) In substructure up to P.L. foundation, footing, column with base tie and plinth beam etc. (N) Without using admixture, plasticiser. (b) M 20 grade concrete or Prop. 1:1.5:3, Base

(B) In substructure from PL upto 1st floor level. (ii) Colomns, pillars, post, struts, suspended floor, etc. (A) M 20 of Prop. 1:1.5:3, Post, Lintel

4.1.4. Brick work in cement mortor with 1st class brick incl. racking out joints and dewatering etc. etc. (I) In sub structure up to P.L. (b) In prop. 1:4, Wall, Step.

(I) In super structure above P.L. up to First floor level. (b) In prop. 1:4

1.3. Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. (ii) With silt (predonnantly non plastic) by truck carriage incl. loading, unloading, Room

2.1.3. Providing and laying 25mm thick damp roof course with Cement concrete in prop. 1:1.5:3 etc.

4.1.8. 1st class brick nogged wall in cement mortar including racking out joints and curing complete above PL up to 1st floor level. (A) 112mm thick brick wall (a) In proportion 1:4. Wall

18.4.2. Providing, and laying rolling shutter of approved make made of 80mm wide MS laths interlocking together etc. Shutter

18.5.3. Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code etc. (a) Open able.

18.5.4. Providing fitting and fixing steel ventilation (openable) of standard rolled steel section as per relevent I.S. Code.

10.2. providing, fitting and fixing M.S. grill of required for windows/ clerestory windows/opening with M.S. flats at required spacing in frame all round, square or round M.S. bars with round headed bolts and nuts or screws. (i) Fixed to bricks works /PCC/RCC

18.3.1. Providing fitting, hosting and fixing of roof trust incl. Purlin fabricated out of MS black tube conforming to relevant IS code as per approved design etc. 50mm dia- rafter, tie, purlin

8.1.1. Providing corrugated galved Iron sheet roofing of TATA Shaktee/SAIL incl. fitting and fixing necessary Galved etc. (D) 0.63mm thick

8.1.2. Providing galved iron ridging of TATA Shaktee/SAIL incl. supplying and fixing necessary galved screws washers etc. (d) 0.63mm thick (ii) 230mm lapping

9.4.1. Providing brage board of size 200mm X 20mm with 1st class local Hollokh/ Bansum etc.

8.1.6. Providing 13mm mesh hexagonal wire made of one is designation (1mm dia) wire above post plate etc.

5.1.4. 65mm thick cement concrete floor consisting of 50 mm under Layer of cement concrete in prop 1:3:6 and 15 mm thick wearing Layer in cement concrete ip prop 1:1:2 etc.

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/ concrete walls for interior plastering up to 1st floor level etc. (A) On rough side (C ) in prop 1:4 Wall, chajja

(B) On fair side (b) In prop. 1:4

5.1.10. Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement etc. (a) 15mm thick

16.1. Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bedings etc. (2) Area of glass panes existing 0.15 m2 (b) 3.00mm thick

13.7.2. Applying primary coat over new matel and matel based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, matel primer (Pink) Shutter -D,W,V Grill

13.7.4. Painting two coats (excluding priming coat) on new steel and other materials surface with enamel paint etc. i) Surface over 100 mm in width or grith. (b) General purpose (Asian paint/Nerolac paint/ J&N paint)

13.6.3. Applying primary coat over new wood and wood based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (white)

13.6.5. Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. b) General purpose (Asian paint/Nerolac paint/J&N paint)

13.2.1. a) Colour washing with lime on wall surface (two coats) over and including a priming coat of white washing etc.

13.9.2. Finishing old/new wall with waterproofing weather coat Smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade etc.

Construction of Cantin 1.1. Earth work in excavation for foundation trenches of walls, relating walls, footing of column, steps septic tank etc. (A) Up to a depth of 2m below the existing G.L. (a) In ordinary soil. Post, Wall

4.1.1. Providing soiling in foundation and under floor with Stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling. Post, Wall

2.1.1. Plain cement concrete work with coarse agg. Of size 13 mm to 32mm in foundation bed for flooring step wall etc. (a) In prop. 1:3:6, Post, Wall

18.1.1. Supplying fitting and fixing in position reinforcement bar conforming to relevant I.S. code etc. (a) Other ISI approved T.M.T. reinforcement bar (SRMB/BISCON/ X TECH) (For Assam Type Bldg, drain, boundary wall etc.) 12 mm dia, Post

(C ) ISI approved MS road, 6mm dia Post, T Beam,Lintel, C. Beam,

3.2.1. Providing from work of 2mm thick Plywood Board so asto give a rough finish incl. centering shuttering etc. 3.2.1.1. Column, pillars, posts & strut of square/rectangular etc.

3.2.1.2. Sides of tie beam, plinth beam, grade beam etc. T Beam, Lintel , C. Beam

3.2.1.3. Flat surface such as soffits of suspended floor, roof, Chajja, Slab, etc.

2.2.1. Providing and laying plain/reinforced cement concrete work with coarse sand and 20mm down graded stone etc. (I) using Mixer Machine (a) In substructure up to P.L. foundation, footing, column with base tie and plinth beam etc. (N) Without using admixture plasticiser.

(B) In super structure from P.L. up to 1st floor level (ii) Column, pillar, posts, struts, suspended floor, roof etc. (b) M20 grade concrete or Prop. 1:1.5:3

4.1.4. Brick work in cement mortar with 1st class brick incl. racking Out joints and dewatering etc. in sub structure. (b) In prop. 1:4, Wall

1.3. Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. (ii) With silt (predonnantly non plastic) by truck carriage incl. loading, unloading, Room

2.1.3. Providing and laying 25mm thick damp roof course with Cement concrete in prop. 1:1.5:3 etc.

4.1.8. 1st class brick nogged wall in cement mortar including racking out joints and curing complete above PL up to 1st floor level. (A) 112mm thick brick wall (a) In proportion 1:4. Wall

18.7.2. Providing fitting and fixing powder coated pressed door frame made of 1.25mm/16mm thick sheet of various size etc. (a) 1.25mm thick sheet (iii) Size 125mm X 60mm (Single rebate)

18.5.3. Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code etc. (a) Open able.

18.5.4. Providing, fitting and fixing steel ventilators (open able) of standard rolled steel section as per relevant I.S. Code etc.

10.2. providing, fitting and fixing M.S. grill for windows/ clerestory windows/opening with M.S. flats at required spacing in frame all round, square or round M.S. bars with round headed bolts and nuts or screws. Plain grill (i) Fixed to bricks work/PCC/RCC

18.3.1. Providing fitting, hosting and fixing of roof trust incl. Purlin fabricated out of MS black tube conforming to relevant IS code as per approved design etc. 50mm dia.

8.1.35. Providing Pre Painted Galvanized Iron Sheet Roofing (Dyna roof/Satham/Durakolor/Century Wells) at all level etc, (iv) 0.60mm thick

8.1.36. Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges/Velley/Gitter/Finishing) (Dyna roof/Sathyam etc. (iv) 0.60mm thick.

9.3.1. Providing wood work in frame in false ceilling, partition etc. swan wrought framed hosting and fixing in position with necessary bolts and nuts etc. (b) With Gamari/Bansum/Sundi

7.9.1. Providing, fitting & fixing hard board sheet ceiling with approved quality with necessary nails, wood screws etc. (C ) 6mm thick, Ceiling

9.4.1. Providing barge board of size 200mm X 20mm with 1st class local Hollock/Bonsum etc.

8.1.6. Providing 13mm mesh hexagonal wire made of one is designation (1mm dia) wire above post plate etc.

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/ concrete walls for interior plastering up to 1st floor level etc. (A) On rough side (C ) in prop 1:4 Wall

(A) On fair side (b) in prop. 1:4, Wall, Chajja

5.1.4. 65mm thick cement concrete floor consisting of 50 mm under Layer of cement concrete in prop 1:3:6 and 15 mm thick wearing Layer in cement concrete ip prop 1:1:2 etc.

5.1.10. Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement etc. (a) 15mm thick

5.7.1.2. Providing ceramic Tiles of approved quality, size, shape and thickness not less than 8mm on wall, skirting etc. (b) Executive range (Somany/Orient?Nitco/Asian make) (ii) Of size 250mm X 350mm and above) Wall Tiles

9.9.3. Providing fitting and fixing factory made wooden paneled door with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness etc. (b) With 1st class local wood (Hollokh/Bansum) (i) 40mm thick with panel inserts of 20mm thickness.

16.1. Providing and fixing clear sheet glass bedded in putty and fixed with/without wooden beddings etc. (2) Area of glass panes existing 0.15 m2 but not existing 0.52 m2 (b) 4.00mm thick

15.2.1. Supplying, fitting, fixing anodized aluminum fittings approved Make, seasonably smooth, free from sharp edges and corners with counter sunk holes for screws etc. (a) Sliding door bolt (i) 300mm X 16mm......

(b) Tower bolts (ii) 250mm X 12mm

(C ) ISI approved MS road, 6mm dia

19.2. Providing plinth protection with brick flat laid in cement mortar 1:4 and finished with 15mm cement plaster in prop. 1:2 with a floating coat of net cement finish etc.

19.5. Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soling incl. 15mm cement plastering etc. i) 300 wide and average 150mm deep with bed slope in 150 etc.

25.12. Providing precast RCC slab in prop. 1:2:4 reinforced with 10mm TMT/HYSD bars @ 150mm cement both ways tying with 20 gauge black annealed etc. (b) 75mm thick

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/berger Paint/ICI paint /J&N paint /Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) wall, D, W, V

13.9.2. Finishing old/new wall with waterproofing weather coat Smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade etc.

13.6.3. Applying primary coat over new wood and wood based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink)

(f) 15mm dia (ii) Using other ISI marked

SANITARY AND WATER SUPPLY 3.3.1. Supplying fitting and fixing stop cock of approved brand of size as mentioned below etc. (I) Brass stop cock (Heavy) of sant make (i) 15mm dia

Repairing of Mandall Barrack 9.1.2. Providing wood work in fram (Showkath) of door, window Clearstory window etc. (d) With 1st class timber (Bansum/Sundi)

9.3.1. Providing wood work in frame in false ceiling protection etc.swan wrought framed hosting and fixing in position with necessary bolts and nuts etc. (b) With Gamari/Bansum/Sundi

7.9.1. Providing fitting and fixing in hard board sheet ceiling with approved quality with necessary nails, wood screws etc. (C ) 6mm thick

9.4.1. Providing barge board of size 200mm X 20mm with 1st class local Hollock/Bonsum etc.

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level etc. (B) On fair side (b=b) In prop. 1:4

9.9.3. Providing fitting and fixing factory made wooden paneled door with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness etc. (b) With 1st class local wood (Hollokh/Bansum) (i) 40mm thick with panel inserts of 20mm thickness.

9.9.7. Providing fittin and fixing fully glassed….window, etc. (c ) With Hollokh/Bansum (i) 40mm thick

16.1. Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bedings etc. (i) Area of glass panes not existing 0.15m2 (C ) 3.00mm thick.

15.2.1. Supplying, fitting, fixing anodized aluminum fittings approved make, seasonably smooth, free from sharp Edges and corners with counter sunk holes for screws etc. (i) 300mm X 16mm

(ii) 250mm X 12mm

(iii) 150mm

19.2. Providing plinth protection with brick flat laid in cement mortar 1:4 and finished with 15mm cement plaster in prop. 1:2 with a floating coat of net cement finish etc.

19.5. Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soling incl. 15mm cement plastering etc.

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint of approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac)

13.9.2. Finishing old/new wall with waterproofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade etc. Wall, Chajja, Post,

13.6.3. Applying primary coat over new wood based surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (pink)V

13.6 5. Painting two coat (excluding priming coat) on new wood and wood based surface with enamel paint etc. (b) High gloss (Asian paint/Nerolac paint/J&N paint)

13.8.1. Applying mordent solution of approved brand and Manufacture (Asin paint/Berger paint/ICI paint/ J&N paint/Nerolac) etc.

13.8.2. Painting two coats on new GCI sheet with ready Mixed anticorrosive paint of appropriate brand and shade suitable for painting over GCI sheet etc.

Repairing of Circle Office Qtr. 23.15. Demolishing CC floor of various thickness incl. top layers and base course and disposal etc.

4.1.1. Providing soiling in foundation and under floor with Stone/best quality Jhama bricks and packed etc. (a) Brick flat soiling.

2.1.2. Plain cement concrete floor base in prop. 1:3:6 laid in alternate bays as specified with coarse agg of size 13mm to 32 mm including etc. (ii) 50mm thick

5.7.2.1. Providing Vitrified floor Tiles of approved quality, size, shape and thickness not less than 18mm on floor, skirting etc. (a) Nominal range (Somany/Orient/Nitco) etc. (ii) Of size 600mm X 600mm and above

5.11.1. Providing Antiskid Tiles of approved quality, size, shape and thickness not less than 8mm on floor, skirting etc. (A) CERAMIC (a) Normal range (size 300mm X 300mm and above) (a) Orient made. Galaxy Brown, etc)

5.7.2.2. Providing polished vitrified wall Tiles of approved quality, size, shape and thickness not less than 8mm on wall, skirting etc. (I) of size 300mm X 300mm and above) (A) Wall Tiles-Wall,W.C,Bath

5.11.1. Providing Antiskid Tiles of approved quality, size, shape and thickness not less than 8mm on floor, skirting etc. (A) CERAMIC (a) Normal range (size 300mm X 300mm and above) (a) Orient/Nitco/Asian Make

5.7.1.2. Providing ceramic Tiles of approved quality, size, shape and thickness not less than 8mm on wall, skirting etc. (b) Executive range (Somany/Orient?Nitco/Asian make) (ii) Of size 250mm X 350mm and above) Wall Tiles

9.1.2. Providing wood work in frame (Chowkath) of door, window, C/window (b) With Hollock/Bonsum, Chokath

9.9.3. Providing fitting and fixing factory made wooden paneled door with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness etc. (b) With 1st class local wood (Hollokh/Bansum) (i) 40mm thick with panel inserts of 20mm thickness.

9.9.7. Providing fittin and fixing fully glassed….window, etc. (c ) With Hollokh/Bansum (i) 40mm thick

9.4.1. Providing barge board of size 200mm X 20mm with 1st class local Hollock/Bonsum etc.

6.2.2. 15mm thick cement plaster in single coat on rough side of brick/ concrete walls for interior plastering up to 1st flooor level etc. (B) On fair sid.

19.2. Providing plinth protection with brick flat laid in cement mortar 1:4 and finished with 15mm cement plaster in prop. 1:2 with a floating coat of net cement finish etc.

19.5. Providing drain with brick work in cement mortar in Prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over on e brick flat soling incl. 15mm cement plastering etc.

16.1. Providing and fitting clear sheet glass bedded in putty and fixed with/without wooden bedding etc. (I) Area of glass panes not existing 0.15 m2 (c ) 3.00mm thick.

15.2.1. Supplying, fitting, fixing anodized aluminum fittings Approved make, seasonably smooth, free from sharp Edges and corners with counter sunk holes for screws etc. (a) Sliding door bolt (i) 300mm X 16mm

(ii) 250mm X 12mm

(C ) Door handles (iii) 150 mm

13.4.7. Wall painting (two coats) with plastic emulsion paint Approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint of approved brand and manufacture (Asian paint/Berger Paint/ ICI paint/J&N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint Approved brand and manufacture (ASian paint/Berger Paint /ICI paint/ J&N paint/ Nerolac) Wall

13.9.2. Finishing old/new wall with waterproofing weather coat smooth anti-fungal exterior painting od Apex brand of Asian paints of required shade etc. Wall

13.6.3. Applying priary coat over new wood and woodand wood based Surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (pink)

13.6.5. Painting two coats (excluding primary coat) on new wood and wood based surface with enamel paint etc. (a) General purpose (Asian paint/Nerolac paint/ J&N paint)

SANITARY & WATER SUPPLY 1.13.1. Providing vitreous China wash basin of size 630mm X 450mm of Parry Ware make with CI/MS brackets etc. (a) Coloured China wash basin of size 630mm X 450mm

1.3. Providing fitting and fixing vitreous china wall hang water closet (European type W.C. pan 400mm high) with seat and lead, CP brass and rubber buffer, CI/MS brackets, etc. (a) Parryware make (VI) Geneve walvit pan set (inclusive of seat cover and fittings) (White/Coloured) (Cat No. C8498)

1.5. Providing fitting and fixing PVC flushing cistern with all internal fittings with Ci brackets including fittings etc. Parryware make (iv) Deluxe Dul Flush (Cat. No. C8110)

1.37.1. Supplying, fitting and fixing PVC pipes of 6 Kgf/cm2 (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. a) In exposed surfaces or in trenches. (ii) 110 mm dia

(iv) 75mm dia.

1.37.2. Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches. (ii) 110mm dia

(iv) 75mm dia.

1.37.6. Supplying, fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (b) Concealled by chiseling or breaking brick wall/CC/RCC and making good to the damages. (ii) 110mm dia

1.37.14. Supplying, fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. (a) In exposed surface or in trenches. (iv) 110mm X 75mm

1.39.3. Providing, fitting and fixing 75mm dia, PVC cowel of ISI make complete as directed and specified.

1.51. Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the Trench with brick bats/charcoal with earth over a Layer of A.C. plain sheet etc.

1.24. Providing, fitting and fixing Chrome plated (CP) towel rail 600mm long of Marc make etc complete. (b) Sona make (b) Towel rail Diplomat 750mm long (Cat No. TR-0605)

1.21. Providing fitting and fixing soap tray/soap dish of parry ware make etc. (A) Parry ware make (a) Recess SP & SG dish (Cat No. C9935)

1.19. Providing fitting and fixing decorative mirror of agmcco make colour CP frame etc. Complete. (A) Parry ware make (a) size 800mm X 600mm

3.1.1. Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, elbow H.W. clamps tec. Complete at all levels including below GL as directed an specified. (A) In Exposed on wall. (b) 40mm dia (ii) Using other ISI marked

(d) 25mm dia (ii) Using other ISI marked

f) 15mm dia 9ii) Using other ISI marked

3.3.1. Supplying fitting and fixing stop cock of approved brand of size as mentioned below etc. (I) Brass stop cock (Heavy) of sant make (i) 15mm dia

RCC stagging ,Deep Tube Well and Pump house 1.1. Earth work in excavation for foundation trenches of walls, retaining walls, footing of columns, steps, septic tank etc. including refilling etc. complete. (A) Up to a depth of 2.00m below the Ground level. (a) In ordinary soil.

4.1.1. Providing soling in foundation and under floor with Bast quality pick Jhama Brick, sand packed and laid to level and in panel after preparing the sub-grade as directed. (a) Brick on flat soling.

2.1.1. Plaint cement concrete works with coarse aggregate of sizes 13mm to 32 mm in foundation bed for footing steps, walls, brick work etc. as directed and specified. (a) In prop. 1:3:6

18.1.1. Supplying, fitting and fixing in position reinforcement bars conforming to relevan I.S. code for R.C.C. works including straightening, cleaning, cutting and bending to proper shapes and length as per details etc. Complete. (b) Other ISI approved TMT Reinforcement bars: 16mm Dia, 8mm dia

3.2.1. Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shuttering, strutting and proping etc. 3.2.1.1. Columns, pillars, posts and struts of sqare/rectangular/Polygonal.

3.2.1.2. Sides and soffits of Beam, beam hanching, bressumers, lintels etc. (a) For depth not exceeding 1.0M

3.2.1.3. Flat surface such as soffits of suspended floor, roof, Chajja, Slab, etc.

2.2.1. Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete. (A) In sub-structure up to plinth level. Foundation, footing, columns with base, tie and plinth beam etc. (N) Without using admixture, plasticiser. (b) M 20 grade concrete or 1:1.5:3

(B) In super structure from plinth level up to 1st floor level. Columns, pillars, posts, struts, suspended floors, roof, landing etc. (N) Without using admixture, plasticiser. (b) M20 grade concrete or 1:1.5:3 col, stagging, col, S/stagging ,p/beam, S/Filter, Slab. Stagging

4.1.4. Brick work in cement mortar with 1st class brick incl. racking Out joints and curing complete as directed. (I) In sub-structure up to plinth level including dewatering if necessary. (b) In prop. 1:4

1.3. Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed & specified. (C ) With river silt (Predominantly non plastic) by truck carriage including loading and unloading.

4.1.8. 1st class brick nogged wall in cement mortar including racking out joints and curing complete above PL up to 1st floor level. (A) 112mm thick brick wall Wall, Pump House

18.4.1. Providing and fitting in position collapsible M.S. shuttering with vertical channels 20mm X 10mm X 2mm braced with flat iron diagonal 20mm X 5mm size with top and bottom rail of T-iron 4mm X 40mm X 6mm with 30mm dia steel pulleys etc. complete.

10.2. Providing, fitting and fixing M.S. grill of required pattern for windows/clerestory windows/opening with M.S. flats at required spacing in frame all round, square of round M.S. bars with round headed bolts and nuts or screws. (I) Plain grill (C ) Fixed to Brick work/P.C.C./R.C.C.

6.2.2. 15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles not exeeding 80mm grith and finished even and smooth including curing cmplete as directed. (a) On rough side. (b) In cement morter 1:4

(B) On fair side (b) In prop. 1:4

5.1.4. 65mm thick cement concrete floor consisting of 50 mm under Layer of cement concrete in prop 1:3:6 and 15 mm thick wearing Layer in cement concrete ip prop 1:1:2 laid in panels and finished with a floating coat of neat cement finish including curing etc. complete as directed.

25.12. Providing precast RCC slab in prop. 1:2:4 including manhole etc. complete. (a) 100mm thick slab

13.7.2. Applying primary coat over new steel and other metal surface over 100mm in width or girth after preparing the surface etc. (a) With ready mixed "Red lead/Red Oxide

13.7.4. Painting two coats (excluding priming coat) on new steel and other materials surface with enamel paint etc. i) Surface over 100 mm in width or grith. (b) General purpose (Asian paint/Nerolac paint/ J&N paint)

13.2.3. (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (Two coats) to give an even shade etc. complete.

DEEP TUBE WELL (100MM DIA) 5.3.4. Labour for boring hole for inserting tube pipes through different soil, rock media including higher vcharges of drill, pipes, scaffolding, tools & Plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the deptt. (iv) Bore hole of 150mm diameter.

5.3.5. Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes etc. complete. (i) G.I. Pipe (a) TATA/SAIL (Mediam) Socket shoud be welding to the pipes

5.3.6. Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes etc. Complete

5.3.7. Supplying, fitting and fixing G.I. filter 1.00 metre long.

5.3.12. Development of the tube well with compressor or by over pumping unit for 48 hours till and sand free discharge is obtained.

5.3.13. Flushing, clearing, washing and watering of the Tube well etc. complete.

Approach Road 30.1. Construction of Sub-grade and earthen shoulder with approved materials obtained from borrow pits, with all lifts & lead etc. (a) From Private land. (1) Total length Road = 24.70 m

30.4. Providing from work ordinary timber planking so as to give a rough finish incl. centering, shuttering etc. (ii) Using 25mm thick plank

30.2. Construction of granular sub-base by providing close grade material, spreading in uniform layer with motor grader on prepared surface etc. (b) Using Grading II material.

(d) Extra Lead beyond initial lead of 5.00 km Gitibari to Khoirabari site

30.5. Providing and laying controlled cement concrete pavement of approved grade with 20mm down graded stone etc. (a) M 20 Grade concrete.

30.6. 15mm thick cement plaster in single coat with hardener of Recron/ Degusa/Fosroc on brick/concrete for plastering including arises, internal rounded angled, chamfers and/ or rounded angles not exceeding 80mm in girth and finished etc.

Construction of Garden Fencing Supplying, fitting and fixing goat proof wire fencing 1070mm high with horizontal wire spacing at 130mm 130mm, 150mm, 150mm, 180mm, and 180mm from bottom etc.

Providing fitting and fixing of Iron gate With Post etc.

SRI HARI RAM DAS