GENERAL KIP RB Rectification work of Chavara distributary between ch. 9450m and 9880m in Thevalakkara Panchayth General Civil Work

Amount

AQUEDUCT MAINTENANCE

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

26.28.2:Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge50mm average thickness

26.28.1:Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge75mm average thickness

26.31.2:Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

OD29527/2024-2025:Providing mixing and applying anti corrosive coating on reinforcement with epoxy zinc rich primer as per specification and direction of Engineer in charge complete in all respect

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

OD32087/2022-2023:Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 16mm dia.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

10.22:Welding by gas or electric plant including transportation of plant at site etc. complete.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

OD33253/2024-2025:Desktop High End Windows Home (Intel Processor), Processor: Intel Core i5 12400 @ 2.5 GHz base frequency, 6 core, 18 MB cache, TDP- 65 W Chipset: compatible Chipset Motherboard: OEM Motherboard Memory: 16 GB DDR4 RAM upgradable to 32 GB. Hard Disk Drive: 512 GB SSD. Graphics Adapter: High end Graphics adapter with 2.0GB memory Monitor: 21.5” or larger TFT/LED Digital Colour Full HD Monitor. Same Make as PC Keyboard: USB interface. Keyboard. Same make as PC. Mouse: Optical with USB interface. Same make as PC. Ports: 6 USB Ports or more (at least 2 USB 3.0 ports and two ports in front panel (atleast 1 should be USB 3.0). Networking facility: 10/100/1000 on board integrated Network Port, & Wi-Fi 802.11 b/g/n connectivity Certifications: EPEAT Certificate/EPR certificate and ROHS Compliance Warranty: 5-year comprehensive on-site warranty including Monitor, Mouse & Keyboard Operating System: Windows 11 Home

OD34151/2024-2025:A4 Monochrome Network Laser Printer Technology: Mono, Laser Auto Duplex Printing Min Print Speed 24 PPM Memory: 64 MB or higher Interface: Hi Speed USB 2.0 and Network Port Print Resolution: 600•600 dpi; Paper Tray Capacity (Input and Output): Min 100 sheet or higher; Duty Cycle: Minimum 5000 Pages per month; Paper size: A4, A5, A6, B5, C5 , Supported OS: Ubuntu 18.04; 20.04, Windows Warranty. 3-year comprehensive onsite warranty, excluding consumables

Bidder Name

ANIL KUMAR S