Repairing rewinding providing lowering of submersible pump motors, providing and fitting fixing of starter, main switch, cable, well cap KIOSK, GI pipe etc. within Zone 1 of Chandipur RD Block under DWS Sub-Division, Kailashahar

Lifting of submerssible pump of 45.00 mtr. Head with suitable single phase motor in/c additional 32.00 mtr submerssible 3 core flat cable (2.5 sqmmsize) complete in all respect as per direction of E.I.C b) For 1000 GPH Capacity submerssible pump with 1.5 HP submerssible motor

Complete rewinding of submerssible motor of different make by insulated copper wire in/c dismantling & reassembling the motor etc. complete in all respect as per direction of E.I.C. (b) 1.5 HP motor suitable for 2000 GHP capacity submerssible pump.

Lowering of submerssible pump of 45.00 mtr. Head with suitable single phase motor in/c additional 32.00 mtr submerssible 3 core flat cable (2.5 sqmmsize) complete in all respect as per direction of E.I.C. (b) For 1000 GPH Capacity submerssible pump with 1.5 HP submerssible motor

Providing and lowering of submerssible pump of 45.00 mtr. Hand with suitable single phase submerssible motor in/c additional 32.00 mtr. Submerssible 3 core copper flat cable ( 2.5 sqmm size) complete all respect as per direction of E.I.C. (b) For 1000 GPH Capacity submerssible pump with 1.5 HP submerssible motor

Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. 40 x 40 x 40 mm dia

Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge 40 mm dia

Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge. 40 mm dia

Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge. 40 mm dia

Providing and fixing G.I. Full way valve as per CPWD specification and direction of the Engineer - in - charge. 40 mm dia

Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fitting as required as per specification and direction of the Engineer-in-charge. (i) 2.50 sqmm

Providing and fixing G.I. pipes medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. A. External work. (v) 40 mm dia. nominal bore

Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:- i) 32 amps 240 volts DP main switch (rewireable):-

Providing and fitting fixing of single phase motor starter unit ( with 2 pole contactor, overload relax, voltmeter & Amp. meter) of Havell's mark in the KIOSK in/c necessary electric wiring as per direction of the E.I.C (b) 2 HP submerssible motor

Supplying and fitting fixing of M.S (18 SWG) KIOSK (size :- width 450 mm x length 1200 mm x heght 850 mm) fitted with 04 nos support of 75 mm (6 mm thick) M.S angle for embedding in 1:2:4 cement concrete base (size 300mm x 300mm x 600 mm) with proper locking arrangement and coated with anti corrosive paint (both inside and outside ) in/c necessary provisions for fitting fixing of single phase motor starter unit, main switch, energy meter etc. complete in all respect as per direction of E.I.C

Repairing of single phase motor starter in/c necessary electric wiring as per direction of the Engineer-in-charge. i) 30A Amps Meter

ii) 300A Voltmeter

iii) 2 Pole Contactor

iv) Capacitor

v) Green Push Button

vi) Red Push Button

vii) 5 Way Connector

viii) Voltmeter Switch

ix) Panel Indicator

x) Relay (Fixed)

xi) Overload Relay

Please Enable Macros to View BoQ information