Construction of an attached toilet for SE/BNC along with rearrangement of aluminium partition and other ancillary work at Room No-102, 1st Floor, Purta Bhavan during the year 2025-2026.

Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS15622: 2006(GroupBIa)and testedasperIS13630:2006(relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤0.08%]infloor,skirtingetc.usingpolymerisedadhesiveof 6mm thicklayerapplieddirectlyoverfinishedartificial stone floor/Mosaic etc without any backing course and joints groutedwith admixture of white epoxy grout materials of approved brand including spacer-2mm as directed and removalofwaxcoatingoftopsurfaceof tileswithwarmwater andpolishing the tilesusingsoft anddryclothuptomirror finishcompleteincludingthecostofmaterials,Iabourandall otherincidentalchargescompleteasperdirectionofEngineer in-Charge.(Note:Thisworkshouldnotbeexecutedwithout specific permission of Superintending Engineer) (a)lnGroundFIoor:(sizenotIessthan600mmX600mmX9.5 mm thick)

Supplying, fitting&fixing1st qualityCeramic tiles inwalls and floors tomatchwith theexistingwork&4nos. of key stones (10mm) fixedwitharalditeat thebackof each tile& finishing the jointswithwhite cementmixedwithcolouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc. (B) Wall WithSandCementMortar (1:3) 15mmthick&2mmthick cement slurry at back side of tiles using [email protected] Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative

Supplying, fittingandfixingBlackStoneslabusedinKitchen slab, alcove, wardrobe etc. laidand jointedwithnecessary adhesiveCementmortar(1:2)includinggrindingorpolishing as per direction of Engineer-in -Charge in Ground Floor. (b) Slab Thickness above 25 mm and upto 37.5 mm

Supplying,fitting&fixinggraniteslab15mmto18mmthickin floor, lobby, stair, landingand treads etc. over20mm(avg) thickbaseofcementmorter(1:2)laidwithwhitecementslurry @4.40Kgper Squaremeter before placingof granite and jointedwithwhitecement [email protected] with necessary pigments and complete as per direction of Engineer-in-charge includingcost of allmaterials, labours, curing and roughening of concrete surface complete. In ground floor (c) Area of each Granite slab above 1.00 Square meter.

Supplying solid flush type doors of commercial quality, the timber frame consistingof topandbottomrailsandsidestylesofwellseasonedtimber65mm wideeachandtheentireframefittedwith37.5mmwidebattensplacesbothways inorder tomake thedoor of solidcore and internal lippingwithGarjanor similarwoodveneersusingphenol formaldehydeasglueetc.complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf)

(A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) Sal : Malayasian

Scantling upto 50mmwide and 12mm thick (chamfering or rounding) for ceiling/partionbattens including fitting, fixing inpositionwithwashers, coach screws etc. complete.: (a) Ordinary teak Mtr. 104 100 93 93 104 100 93 93 97 97 97 97 97 97 97 (b) Sishu / Champ /

Renewing wood moulding (50mm x 37.5m) of panel partition or panel door. (b) With Ordinary teak

Designingofdifferentcustomisedcurved&plainmetalcraftbylasercutting on differentmetalsheetsofvaryingthickness for specialarchitecturalapplication asfacade/wallpanel/ceilingdecorationasperdesign,drawingorasapproved standard by the Engineer-in-charge including transportation. (Mode of measurement - linear /peripheral dimension of laser cut area) Mild Steel Plate, Aluminium & Stainless Steel i) 2.0mm thick

Supplyingfitting, fixingdecorativelaminationconformingtoIS:2046:1995as perapprovedmake, brand, finishand thicknesswith fitting, fixing thesameon Particle/MDF/PlyBoardswithrecommended/approvedadhesivewithproper clipping the sides for better attachment as per direction of Engineer-in charge.Therateincludes thecostof labour,adhesiveandall incidentalcharges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm