Illumination work on Brahma Chowk Kurukshetra to Railway Station Amin (9.51 Km Approx.) in Distt. Kurukshetra.

Amount

Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. HRS No. 31.12 c (i)

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp. HRS No. 31.17(a) (ii)

TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. HRS No. 31.17(a) (iii)

(P) Pipe Laying. Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 80 mm dia. HRS No. 31.21(xxx) (b)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HRS No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HRS No. 31.22(ii)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HRS No. 31.22(xii)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HRS No. 31.22(xvi)

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 4 Core Cable . HRS No. 31.26 (xI) Ard.

25 Sq. mm 4 Core Cable . HRS No. 31.26 (xIi) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HRS No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HRS No. 31.28 (iii)

(v) Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 900 mm wide , 1500 mm high , 450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1050 mm x 600 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster ,having a base of size 1200 mm x 750 mm x 250 mm below ground level . HRS No. 31.33 (iv)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). HRS No. 31.40 (i)

Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, TP & N (Horizontal) (8+12) HRS No. 31.41 (iv)

Supply and erection of copper lugs including crimping etc.upto the entire satisfaction of Engineer-in-Charge of work. 1.5 sqmm to 2.5 sqmm HRS No. 31.45 (a)

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 63/50 outer dia / inner dia. HRS No. 31.67 (i)

Supply & errection of Hot Dip Galavnized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by manufacture including cost of foundation accessories etc. The foundation bolts as per manfacturer design should be hot dipped galvanized pole to complete with door locking arrangement.Terminal plate consisting of 2 nos. 100 A, 4 pole natural links including connection etc. with suitble connecting arrangement for 2 no. MCBs/ kit kat including cost of R.C.C 1:1. 5:3 for foundation size 0.7M x 0.7M x 1.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 7 Mtr. Long pole with top dia 70mm and bottom dia 130mm with base plate of size 220x220x12mm. HRS No. 31.68 (i)

S&E of Single bracket made of 40mm dia GI pipe B class 1.50 mtr. Long on each side with GI coller 0.50 mtr. Long of suitable size to fit on octognol pole with top dia 70mm including necessary nut and bolts etc. required for fixing of bracket on top of 8 mtr. Long octogonol GI pole duly painted with aluminium paint of make GE / Bajaj / Crompton complete in all respect upto the entire satisfaction of Engineer in charge of work. NS-1

Supply and erection of LED Streetlight Luminaires 90 watt of Makes Hevells (Model No. ENDURACITYLINERNEOSL90WLED 757SASYBOTG) LED made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Philips, Bajaj & Crompton / Panasonic). NS-2

Supply and erection of CT operated electronic energy meter with CTs of required ratio duly erected wired tested from UHBVN laboratory including necessary testing fees and petty material installed in MS box of 16G complete in all respect all items of make specification and size as approved by UHBVN. NS-3

Pdg. trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. NS-4

Supply & erection of 65 Amp. 3 Pole / 230 V Astronomical time switch required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. Make: Havells / L&T / Indoasian. NS-5

M/s JSB Enterprises