REPAIR/REPLACEMENT OF CERTAIN TP FURNITURE ITEMS UNDER BSO AT AHMEDABAD CANTT

S&F of follwing parts of Steel shelving cabinet adjustable with overall Size 1155x760x300mm including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. (DGS&D)

Lock of 50 mm 6 lever as per Drg.

Handle of size 150 mm as per Drg.

Welding (in lieu of stopper) shelves of Almirah med steel complete all as directed.

Hinges of 150 mm as per Drg.

M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Med steel. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed.

S&F of follwing parts of Steel shelving cabinet adjustable with overall Size 1855x910x480mm including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. (DGS&D)

Lock of 50 mm 6 lever as per Drg

CP Handle of 150 mm as per Drg.

Welding (in lieu of stopper) shelves of Almirah Large steel complete all as directed.

Hinges of size 150 mm as per Drg.

M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Larg steel. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed.

S&F of follwing parts of ASCo Chair Revolving including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of overall size 1060X700x510mm (Drg - TP)complete.

Arms rest of 300 mm fixed to chair computer all as specified in Drg and complete.

Seat of 510x470x60 mm for computer chair all as per Drg seat shall be fixed over 12mm thick not pressed plywood commercial and shall be upholstered with superior quality fabric and moulded polyurethane foam 75mm thick PVC lipping alround; Rate of cloth shall not less than Rs. 350 RM. Rest all as shown in drg and complete.

Back of 510x470x60 mm for computer chair all as per Drg back shall be fixed over 12mm thick not pressed plywood commercial and shall be upholstered with superior quality fabric and moulded polyurethane foam 75mm thick PVC lipping alround; Rate of cloth shall not less than Rs. 350 RM. Rest all as shown in drg and as complete.

Castor wheel ISI marked of computer chair all as per specified and shown in drg and complete.

Pedestal assy ISI marked of computer ISI marked all as per specified and shown in drg and complete.

Hydraulic assy ISI marked with 600 mm pitch centre dia of computer all as per specified and shown in drg and complete.

S&F of follwing parts of Locker steel with mirror including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of over all size-1100x760x440 (CWE/FD/04-09)

CP handle of 150mm as per Drg.

Welding (in lieu of stopper) shelves of Locker bedside steel complete all as directed.

Hasp and Staple as per drg.

Hinges of 150mm as per Drg.

M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Med steel. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed.

S&F of follwing parts of Table 3’x2’ with drawer and Table 3' x 2' without drawer (steel frame) including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of overall size 0.0164 cum, FD-1008/1077

Top of size 900x600 mm made out of 18/19mm thick pre laminated MDF board exterior grade including 4mm thick teak wood beading all round complete all as specified and shown on Drg.

Hard rubber shoes of legs of the table all as specified.

Lock for drawer of table 3x2 with drawer. Make : Godrej/Harison as per Drg.

M&L spray painting with one coat of black/white/Gray/OG enamel paint best quality to all exposed steel surface of table 3’x2’ with drawer/without drawer complete all as specified and shown on Drg.

S&F of follwing parts of Composite office Table double storage including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of Overall size- 1800x900x760mm FD-DGS&D

Table top of 1800x900 mm , 18 mm thick prelaminated MDF board, one side decorative lamination and other side balancing white lamination, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as specified and as directed.

Drawers of 510x355x100 mm made out of MS sheet of 20 gauge as per existing pattern and size complete all as specified and as directed.

Rubber shoes PVC superior quality to legs of table offfice clerk steel all as specified and shown on Drg n directed

M&L for applying one coat of synthetic enamel paint, olive green/gray colour to Table office officer steel rest including preparation of old surfaces complete all as specified and as directed.

S&F of follwing parts of Composite office Table double storage including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of Overall size- 1500x900x760mm FD-DGS&D

Top of size 1500x900 mm made out of 18/19mm thick block board covered with 22 Guage Aluminium sheet complete all as specified and shown on Drg.

M&L spray painting with one coat of black/white/Gray/OG enamel paint best quality to all exposed steel surface of table dining OR complete all as specified and shown on Drg.

S&F of follwing parts of Table Bed Side Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing Overall Size-550x550x330 mm FD-157

Top of size 550x330 mm made out of 18/19mm thick Prelaminated Particle Board complete all as specified and shown on Drg.

M&L spray painting with one coat of black/white/Gray/OG enamel paint best quality to all exposed steel surface of table bed side steel complete all as specified and shown on Drg.

Welding to broken frame of Table Bed Side steel complete all as directed.

S&F of follwing parts of chair writing including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Overall size 0.0149cm 500x950 mm (FD/E6/MAP/12) complete.

Handle with inner and outer size of 210mm and 230mm respectively and fixed to chair writing all as specified in drg and complete.

Cushion seat of 530x450 mm of foam density of 32 D of Make : Sleepwell/Kurlon covered with fabric cloth of not less than Rs 300/meter and all as specified in drg and complete.

Cushion back of 530x450 mm of foam density of 32 D of Make : Sleepwell/Kurlon covered with fabric cloth of not less than Rs 300/meter and all as specified in drg and complete.

M&L for painting to steel frame of chair writing with spray painting one coat of black synthetic enamel paint best quality after preparation of steel surface complete all as specified and complete.

S&F of follwing parts of Table Computer steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing Over all size-900x750x600 mm Drawing -TP complete.

Table top of 900x600 mm , 18 mm thick prelaminated MDF board, one side decorative lamination and other side balancing white lamination, exterior grade with 4 mm thick Teak wood beading duly French polished complete.

Key board of 480x440 mm with telescopic channel of table compute with MDF Prelaminated board exterior grade 18/19 mm thick with teak wood beading all round 4 mm thick with french polished and 1.6 mm thick ISI telescopic channel of same size and shape as per existing pattern.

Drawer / mouse board of 365x220 mm with telescopic channel of table computer and S&F new drawer / mouse board of MDF prelaminated board exterior grade 18/19 mm thick with teak wood beading all round 4 mm thick with french polished and 1.6 mm thick ISI telescopic channel of same size and shape as per existing pattern complete.

M&L for painting to steel frame of Table Computer with spray painting one coat of black synthetic enamel paint best quality after preparation of steel surface complete all as specified and complete.

Charpoy IP hard Top : S&F of following parts of Charpoy hard top including dismantling of old unserviceable parts without disturbing the other parts made to shape and size as shown on drg. Complete all as specified and directed. Overall Size-1980x900x440 cm. FD/MAP-II/11

Top : M&L for removing of old u/s plywood top from bed hard and S&F new plywood top 12mm thick of BWR grade ISI marked confirming to IS 303 Make : Kitply/Archidply/Century in one piece of size as shown in drg and fixed with 08 Nos. nut & bolts to bed hard all as specified and shown in Drg and as directed.

Paint : M&L for spray painting one coat of synthetic enamel paint OG/Black to all steel surface after preparation of old painted surface by applying snd paper and filling with putty wherever required to bed hard all as specified and directed.

S&F new ms complete frame of charpoy IP Hard Top consist of two long rails of size 1980x32x32mm(16 Gauge) and 2 short rails of size 900x25x60mm(16 Gauge). legs of size 440x32mmx32mm (16 Gauge) to be welded to long rails and short railsalong with two stiffeners of size 25mmx25mm (16 Gauge) as shown drawing .

S&F of follwing parts of Bed Hard Steel with ply wood top including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. Over all size - 2050x980x830 mm FD/E6/MAP/08(R)

Head rest of 830x250 mm with 18mm thick pre-laminated MDF board Exterior Grade Make : Greenlam/Century/Kitply, all as specified and shown in drg and as directed .

Foot rest of 830x250 mm with 18mm thick pre-laminated MDF board Exterior Grade Grrenlam/Century/Kitply ISI all as specified and shown in drg and as directed.

Plywood top from bed hard of 12mm thick of BWR grade ISI marked confirming to IS 303 of size 2050x980 mm Make : Greenply/Kitply/Century as shown in drg and fixed with 08 Nos. nut & bolts to bed hard all as specified and shown in Drg and as directed.

S&F new ms complete frame of Bed Hard Steel consist of two long rails of size 2000x90x35mm(16 Gauge) and 2 short rails of size 900x45x60mm(16 Gauge). to be welded to long rails and short railsalong with three stiffeners of size 25mmx25mm (16 Gauge) as shown drawing .

M&L for spray painting one coat of synthetic enamel paint OG/Black to all steel surface after preparation of old painted surface by applying snd paper and filling with putty wherever required to bed hard all as specified and directed.

S&F of follwing parts of Table Bed Side Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing Overall Size-550x550x330 mm FD-157

Top of size 550x330 mm made out of 18/19mm thick Prelaminated Particle Board complete all as specified and shown on Drg.

M&L spray painting with one coat of black/white/Gray/OG enamel paint best quality to all exposed steel surface of table bed side steel complete all as specified and shown on Drg.

Welding to broken frame of Table Bed Side steel complete all as directed.

S&F of follwing parts of Book Case Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. Overall size 1675X840x310 mm FD-1028

CP handle of 150mm as per Drg.

Lock of 50 mm, 6 lever Make : Godrej/Harison as per Drg.

Glass of Size 840x360 mm as per Drg.

Welding (in lieu of stopper) shelves of Almirah med steel complete all as directed.

M&L Spray painting one coat with synthetic enamel paint in side and out side of Book Case steel. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed.

S&F of follwing parts of Table Office Officer Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of Overall size- 1800x1200x760 mm FD-84(M)/1003

Table top of 1810x1200 mm , 18 mm thick prelaminated MDF board, one side decorative lamination and other side balancing white lamination, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as specified and as directed.

Drawers of 510x355x100 mm made out of MS sheet of 20 gauge as per existing pattern and size complete all as specified and as directed.

Rubber shoes PVC superior quality to legs of table offfice clerk steel all as specified and shown on Drg n directed

M&L for applying one coat of synthetic enamel paint, olive green/gray colour to Table office officer steel rest including preparation of old surfaces complete all as specified and as directed.

Cushion of Sofa: overall size- 600x600 mm FD-373

Replacement of unsv cushion for seat/back with new cushion of sofa set 5 seater comprising (3+1+1) seat/ back of foam 40 D of size 22''x21''x100 mm, duly covered zip with cloth (Molfino fabric) stiched with fine standard thread and providing a chain of best quality of make YKK with two runners at both ends of superior qulaity complete all as directed and shown on Drg No FD/MAP-II/02 Make:- Sleep Well/ Dunlop/ MM Foam

Conversion of Charpoy GI Pipe Newar into Charoy GI ply top (FD-220) of size 1980x900x430mm: Dismantling / removing the following UNSV components and S&F new components / Parts complete.

Removing the existing unserviceable nylon newar / plywood top from charpoy GI with all fittings & tightening / refitting of frame by all the check nuts, elbow, long rails, short rails and legs to hold the charpoy tight

Plytop of 12mm fit to size with 10 Nos per charpoy mild steel 6mm dia 75mm long screw bolt (Machine made) hexagonal or square head or round headed with nut and washer.

Stiffener 03 Nos made out of MS flat iron 50 x5 mm thick at equal distance in between long rails with ‘L’ shaped bend at both end up to 32mm fixed with round headed counter sunk screws and bolts of size 3mm dia 75mm long (total 06 Nos) after drilling suitable hole to long rail fixed rigidly of the 32mm bore GI charpoy and applying two coats of synthetic enamel black paint over a coat of red oxide primer

GI elbow (32mm dia) ISI marked three way medium grade weight not less than 450 gms each.

GI checknut 32mm dia medium grade weight not less than 35 gms each.

Long rail 32mm dia medium grade long rail of length 1.9 mtr including cutting, threading one side upto 25 mm long at end & other side to 50 mm long at end for GI Charpoy (Note: Long Rails are screwed fully in the angle elbow)

Short rails for GI Charpoys 32mm dia made out of from broken long rails obtained from srl item No. 17.06 above including cutting & threading 25 mm long side end rails and fixed to Charpoy GI pipe complete. (Note: Short Rails are screwed fully in the angle elbow)

Legs for GI Charpoys 32mm dia made out from broken short rails obtained from Srl item No. 17.07 above including cutting, threading and fixing and providing of 5mm thick MS Plate of dia 50mm at bottom of legs by welding duly painted with two coat of synthetic enamel black paint over a coat of red oxide primer. (Note: Legs are screwed fully in the angle elbow)