PRESS N.I.T. NO. 02(2021-22)

Supply of horizontal split casing bare pump with impeller & Neck ring (CF8M), Casing (CI) and shaft Sleeve (SS-410) with suitable bearings, rest of other parts as per company standards in fitted conditions. Head: 45 Mtr. Discharge : 1320 - 1330 m3 h (In between) RPM : 1490 - 1500 (In between) Suction/Delivery : 350X300 mm Recommended suitable motor : 225KW to 250KW Make: M&P/KBL/KSB/JYOTI/LUBI and other DJB approved make (If any)

Dismantling of electric connection from motor. De fastening of fasteners. De coupling of coupling from the motor and pump. Separating motor and pump from the base frame and placing them at safe place in pump house by Crane and Manual Labour.

Braking of RCC by concrete breaker for foundation bolt pocket and foundation with RCC for complete foundation as required for fresh foundation with RCC. This includes removing of malba of CC from the foundation side by manual labour from the depth from ground floor to outside of pump house by tempo.

Removing of foundation bolt by manual labour clean by hammering of chisel to make the bolt free form the RCC foundation bolt one by one with manual labour.

Supply of foundation volt of size1”X18” or as per site requirement.

Supply of Nut-bolts and washer off size.

Supply of rubber packing. Make:- Any DJB approved make.

Fabrication of MS foundation of size 9x3.5 feet or as per site requirement as per frame size of pump and motor with MS thickness (8-10mm), MS channels (200 x 75mm; approx. – 15 mtr., 100 x 50mm; approx. – 5 mtr., 125 x 65mm; approx. – 4 mtr), Ms Angle (75 x 75 mm; approx. – 3 mtr.), MS flat (75 x 10 mm; approx. – 3 mtr.).

Supply of Flanges/ tapers/reducer/enlarger/ MS Pipe of suitable size as per site requirement, elbow of MS pipe 10 mm thick etc on suction/delivery side as per site requirement

Providing /making of proper centering/shuttering foundation having appropriate size of TMT bars in order to take-up the load /vibrations during pump operation.

Providing and laying cement concrete in ratio 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) in foundation for griping the foundation bolts excluding the cost of centering, shuttering but including the cost of finishing.

Installation of above motor pump sets after fixing the MS foundation with all allied works i.e fixing of the motor and pump and coupling, fixing required size reducer, enlarger, elbow etc as per site requirement including all allied electrical, mechanical and civil work necessary to make functional the pump-motor set be operational (even if not included into the estimate),watch and ward, taking all safety precaution, arranging all tools and tackles i/c welding set gas cuter etc.

Cartages loading and unloading of material and machine and all tools and tackles with to fro charges.

Testing and commissioning of all E&M equipment at no load and at full load successfully with vibrations.