Revamping of fire fighting arrangements in Medical college Kalamassery

Amount

Above / Below Ground Piping:- Supply, errection,testing and commissioning of GI 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc.including cutting,welding,fixing in/on walls/ceiling by suitable,supports. The pipe shall be apinted with one coat of primer and two coats of synthetic enamel paint of approved colur/shade.

200mm dia

150mm dia

100mm dia

80mm dia

25mm dia.

Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft,Nitrile Body linning . PN 16 rating.Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts.

200mm dia

150mm dia

100 mm dia

80mm dia.

50mm dia

Supply,installation, testing and commissioning of C.I. slim seal type Non return valve with required flanges, nuts and boltsw gasket etc. complete

150mm dia

100 mm dia

80mm dia.

50mm dia

Supply and installation of the following sizes of cast iron Foot valve with strainer to the pump sets complete with bolts,nut gaskets if any as required etc.

150 mm Dia

100mm dia.

Supplying, installing,testing and commissioning of Cast Iron Ball Valves with fittings of screwed end type

25mm Dia

Supply,installation,testing and commissioning of instanceous pattern Gun metal Double Headed Hydrant valve bearing to IS:5290,63mm lblique type with instantaneous hose coupling adaptor, complete with PVC blank cap

Supply,installation,testing and commissioning of instanceous pattern Gun metal single Headed Hydrant valve bearing to IS:5290,63mm lblique type with instantaneous hose coupling adaptor, complete with PVC blank cap

Supply and place in position of Gunmetal Branch pipe with 63mm female instanceous inlet, male,threaded outlet,complete with hexagonal base nozzle conforming to IS:903 with ISI mark.

Supplying,installing,testing and commissioning of optical type Convensional type smoke detectors/ heat detectors with solid stage design, indicating lamp, mounting base etc.

Supplying,installing,testing and commissioning of response indicator with solid stage design, indicating lamp, mounting base etc.

General servicing of slim seal type Butterfly valve/Non return valve/Sluice valve including renewing gland packeing cleaning greasing etc complete paiinting with red signal paint and making the same in good working condition of size

80mm dia

100mm dia.

150mm dia

Do double head hydrant valve

Do single head hydrant valve

Do branck pipe 63mm dia

Do smoke detectors including dismantling cleaning and refixing in position complete

General servicing including overhauling complete greasing the bearings, impregnating the windings with best quality insulating varnish checking conections and making the motor pumpset in good working condition complete including painting with suiatable paint of Electric motor driven main pump of capcity 90/100hp

Do Jockey Pump

Do Terace pumps

Supply and place in position of Controlled percolated Hose conforming to IS 623,63mm 15 Mts.Long ,with male and female instantaneous gunmetal coupling

Supply,installation,testing and commissioning of Hydraulic, Hose Rest drum completed with swinging type drum with 19mm dia Rubber braided hose of 30M length and Shunt off nozzle, with necessary fittings etc.complete

Supply,installation,testing and commissioning of Hose Cabinet to accommodate one piece of hose pipe along with one pair of make and female coupling and one branch pipe. The cabinet is made of 20swg M.S. sheet, glass fronted with hinghed door and lock. The cabinet is spray painted to scarlet red colour.

Do Double

Supply,installation,testing and commissioning of single acting Air Release Valve with screwed inlet 25mm dia etc.

Supply,installation,testing and commissioning of Fire Brigade inlet connection with 4 Nos. of 63 mm dia built in Gun metal Non-retun valves instantaneous coupling type arranged on 100 mm dia etc. Pipe manifold shall be connected to wet riser main.

Supply,installation,testing and commissioning of approved make 15mm brass sprinkler heads designed to operate at 68 deg.. Celcious etc. with necessary fitting etc.complete.

Pendent type

Side wall type.

Supply and fixing of 2 piece stainless steel friction fit recessed escutcheon type Rosette plate.

Supplying installating testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alam panel

Supply,installation,testing and commissioning of pressure switch in place of defective one

Supply,installation,testing and commissioning of pressure gauge in place of defective one

12V 7 Ah battery for fire alarm panel in place of defective one

Charges for General servicing and maintenance of strainer including Gasket changing

Charges for General servicing and maintenance of Hose box including replacement of broken glass beeding painting etc.

Charges for General servicing and maintenance of fire bridge inlet 3 way

Charges for General servicing and maintenance of Manual call point including changing brocken glass

Charges for painting of the existing pipes with two coats signal red enamel paint (pump room and above ground)

Part II - Fire Detection & Alarm System

Supplying, installing, testing and commissioning of microprocessor based main fire alarm control panel of 6 zones capacity with visual LED indications for fire/fault alarms, signals and should have stage alaram facility with maintenance free battery back up for 24 hours normal operation and 15 minute alarm operation. The panel shall be fabricated by MS sheet and powder coated both inside and out side door shall be glass fronted type with locking arrangement as per specification.

Supplying,installing,testing and commissioning of microprocessor based Sector fire alarm control panel of 4 zones capacity with visual LED indications for fire/fault alarms as required

Supplying, installing, testing and commissioning of Manual call point break glass type as per standard specification.

Supplying,installing,testing and commissioning of Electronic dual tone Hooter(sounder) as per standard specification.

Supplying and laying of PVC conduit with all necessary fittings. Etc.

20 mm dia

Supplying and laying of 1 sq.mm cross section PVC insulated copper wires.

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages, colour washing etc. as required.

2 core 1.50 sq mm using factory made saddles

Part III - Fire Extinguishers

Supplying and fixing of Dry chemical powder type fire extinguisher of 5 kg.s. capacity, with intial filling in brand new Cylinder with power coated finish fitted with Gun metal union, discharge hose, wall mounting bracket etc.complete confirming to IS.2171

Part IV - Fire signage/ Fire pump/ Sprinkler

Supply & erection of Glow Sign Boardmade of 3mm thick PVC foam board for each floor 12" x 4" (appropriate places)

Supply & erection of Assembly Point sign board 16" x 16"

Supply & erection of Fire Escape rout in each floor having size 12" x 16" made of 3mm thisk acrylic sheet with glass frame

Supply, Installation, Testing and Commissioning of solid state Amplifier of 60W RMS out put in rack, including necessory control wires, jacks etc. complete as required

Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.

Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System.

Supply, erection, testing and commissioning of Talk back field device .

Charges for preparation of Fire Drawing per A3 sheet first copy

Copying charges for additional copies per A3 sheet