Provn of certain Minor and Revenue works under GE Dehradun

Amount

Excavating over areas, n exc 1.5 m deep and getting outsoft/loose soil complete all as specified and directed.

Excavating in trenches in any type of soil , n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

Material and labour brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortor 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed .

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin etc complete all as specified and directed .

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4), finished surfaces even and smooth complete all as specified and as directed.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and as directed .

Material and labour for preparation of new plastered surfaces of external wall and application two coats of exterior emulsion weather coat paints over a coat of alkaliresistant priming paint complete all as specified and directed.

Material and labour for preparation of already prepared surface of wall and applying two coats of oil bound distemper complete all as specified and directed.

Material and labour for non skid/mat finish ceramic coloured tiles exceeding 0.11 sqm but not exceeding 0.18 sqm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for 16-18 mm thick granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar 15mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 3.0 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided.

Supply and fixing of factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, terunning meterite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

Supply and fixing of 30 mm thick WPC factory made 100% solid flush designer door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

Supply and fixing of stainless steel 150 mm long handle, cast type,complete all as specified and as directed

Supply and fixing of stainless steel tower bolt 200 mm long of extruded section etc complete all as specified and as directed

Supply and fixing of stainless steel sliding door bolt size 300 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-complete all as specified and directed.

Supply and fixing of butt hinges 100 mm size medium weight stainless steel and fixed complete all as specified and as directed

Supply and fixing of 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of 150 mm long aluminium anodised handles of fabricated type complete all as specified and directed.

Supply and fixing of 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Material and labour for cutting chases for concealed water tubing or concealed pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing of vitreous china wash hand basin, white, of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, pillar tap including fixing of tap, waste fitting etc complete.

Supply and fixing of vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified and directed.

Supply and fixing of vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

Supply and fixing of 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks of weight not less than 33Killogram (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks white colour of capacity 500 litres tripple layer, not less than 18 Killogram (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

Supply and fixing of PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete all as specified and directed

Supply and fixing of vitreous China half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and as directed.

Supply and fixing of urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

Supply and fixing of rolled section, mild steel joist channel as angle or Tee section, MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed.

Supply and fixing of mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, valley gutter, etc. fixed with self tapping screws as specified.

Supply and fixing of 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

Supply and fixing of 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing of stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and directed

Supply and fixing of tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed

Supply and fixing of fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

Supply and fixing of 110mm bore PVC (SWR) bend of any radius fixed complete all as specified and directed

Supply and fixing of 75mm bore PVC (SWR) bend of any radius fixed complete all as specified and directed

Supply and fixing of 110mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

Supply and fixing of 75mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

Supply and fixing of 110 mm PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed

Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 150 mm Internal dia, grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed

Material and labour PCC (1:4:8) type D-2 (using 20 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 200 mm Internal dia, grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

Excavation in soft/loose soil as in post holes each not exc 0.5 cum & getting out, returning filling in and ramming earth in layers not exc 25cm thick, watering making good surfaces and removal of surplus soil to a distance not exc 50 mtr complete all as specified and directed.

Material and labour for PCC 1:3:6 type E-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete, fencing post etc complete all as specified and directed.

Supply and fixing of rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed

Supply and fixing of mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe290-W(Gde-E-165), complete all as specified and directed.

Supply and fixing of mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm long (05 to 10 mm dia of neck) complete all as specified and directed

Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor for lay floor finish complete all as specified and as directed.

Material and labour for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in levelling course etc complete all as specified and directed

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for fomwork to soffit of suspended slabs such as roof slab,floor slab,landing and similar work not exc 200 mm thick horizontal or sloping,flat rough finished surfaces of concrete complete all as specified and directed.

Material and labour for fomwork flat rough finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening complete all as specified and directed.

Material and labour for RCC 1:2:4 type B1 {using 20 mm graded stone aggregate) as in slabs supported on walls,beams and columns in floors,roofs,landing,balconies, canopies,deck slabs and in shelves and like complete all as specified and directed.

Supply and fixing of steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing of mild steel TMT bars 8 mm dia, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Description all as per item No 69 above but 8mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

Material and labour for vitified ceramic coloured tiles 10 mm thick light shade (Square/rectangular)polished area of each tile n.exc 0.36Sqm in floors e.t.c in floors etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for heavy duty ceramic coloured tiles 10 mm thick dark shade (Square/rectangular)polished area of each tile n.exc 0.36Sqm in floors e.t.c in floors etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties thick grey cement and pigment set and jointed in neat cement slurry @ 3.00 kg/square metre, and pointed in white or coloured cement to match the surface of tile as in floor and laid over including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Material and labour for 60 mm thick vibromatic reinforced precast cement concrete 1:2:4 (using 20mm graded stone aggregate) with 1mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in man hole cover slabs finish fair even and smooth without using extra cement (Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed by Engr-in-charge (Note : CA No and date will be engraved on covers. Reinforcement shall be measured and paid saperately. Curing will carried out with ponding method)

Material and labour for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed.

Material and labour for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Material and labour for construction of soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 2.4 M dia X 3.0M deep (Ref CE Bareilly Zone TD) complete all as specified and directed.

Material and labour for construction of 50 users Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. (Ref TD/217 of CE Bareilly Zone ) complete all as specified and directed.

Material and labour for construction of 100 users Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. (Ref TD/217 of CE Bareilly Zone ) complete all as specified and directed.

Material and labour for reinforced cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beam,lintal beam etc. complete all as specifed and directed.

Material & labour for use & waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter including fair finished surfaces complete all as specified and directed.

Supply and fixing of health faucet chromium plated suitable for 15mm dia pipe with 1 or 1.25mtrmetre long flexible tube and ABS wall hook fixed to wall all as specified and directed

Supply and fixing of fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B0 40 mm thick in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Material and labour for preparing of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

Supply and fixing of factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle,steel peg stay,complete without glazing bars,dovetailed or welded complete all as specified and directed.

Supply and fixing of factory made steel window with side hung shutters including projecting/box/pin type hinges with steel handle,steel peg stay,complete with glazing bars,dovetailed or welded complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing of 4 mm thick plain sheet glass,ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pane and complete all as specified and directed.

Description all as per item No 95 above butOne 3pin 5 Amps socket out let on independent board controlled by one, one-way switch complete all specified and directed .

Description all as per item No 95 above but One 3pin 5 Amps socket out let on same board controlled by one, one-way switch complete all specified and directed.

Description all as per srl item No 95.00 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed

Description all as per srl item No 95.00 above but point wiring with4 Sq mm (nominal area) multistranded copper conductor cable for one six pin socket outlet 15Amp controlled by one switch on independent board and 4Sqmm PVC insulated multistranded copper conductor cable as continous earth wire complete all as specified and directed.

Supply and fixing switch piano flush type single pole one way 230 Volts 6 Amps, complete all as specified and directed.

Supply and fixing switch piano flush type single pole one way 230 Volts 15 Amps, complete all as specified and directed.

Supply and fixing of socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fixing of socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

Supply and fixing of ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed.

Supply and fixing of batton holder ISI Marked mounted on wall including 09 Watt LED Bulb all as specified and directed.

Supply and fixing of modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.

Supply and fixing of LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , 2 years warranty ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed..

Supply and fixing of mirror light decorative compact luminaries with decorative ends caps incl 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing of LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed.

Supply and fixing of post top lantern LED type 20 watt 230 volts AC out door type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant completewith driver and lamp complete complete all as specified .

Supply and fixing of LED Bulk head light fitting 10 Watt capacity die cast alluminum including surface mounted, with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed.

Supply and fix distribution board vertical triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed

Supply and fix distribution board SPN 12 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection and also incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed

Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection and also incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed

Supply and fix distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection and also incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed

Supply and fixing of MCB SP 6 to 32 Amp 'C' series 10 KA repturing capacity conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB SPN 6 to 32 Amp 240 V AC 10 KA repturing capacity conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB SPN 40 to 63 Amp 240 V AC 10 KA repturing capacity conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc complete all as specrified and directed.

Supply and fix exhaust fan, metallic body AC single Phase. 230V of size 300mm sweep RPM, single phase, 230V AC with louver all as specified and making hole for fixing arrangement on wall with frame holdfastner, bolt, washer, PCC (1:2:4) B-1 block etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector all a directed.

Supply and fix exhaust fan, metallic body AC single Phase. 230V of size 380mm sweep RPM, single phase, 230V AC with louver all as specified and making hole for fixing arrangement on wall with frame holdfastner, bolt, washer, PCC (1:2:4) B-1 block etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector all a directed.

Supply, fixing and testing of electric water heater, storage type ABS body with EPAC coated steel inner tank having minimum 8 kg/cm2 pressure bearing capacity and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply and fixing of temperature resistent SS braided pipe suitable to sustain pressure up to 8 bar not less than 60 Cm long suitable for out going (Hot Water) connections of Geyser with washer etc. complete all as specified and directed.

Material and labour for laying, jointing and testing of underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 16Sqmm 2 core, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs complete all as specified and directed: Notes: (a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately. (b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses. (c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.

Description all as per srl item No 127.00 above but 16Sqmm 4 core complete all as specified and directed.

Material and labour for sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

Material and labour brick well burnt class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00mm dia by means of bolts, nuts, Check nuts and washers of galvanised iron and thimbles and other end of the earth wire all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board and protected by galvanized iron pipe medium 15 mm bore, and water pipe 20 mm bore GI light grade with funnel and wire mesh, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 50mm thick cover, reinforced with 8mm dia deformed or TMT bars 100mm C/C both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

NOTE:- Amount of credit of Rs. Nil for retrieved materials is mentioned in Schedule of Credit Page No Nil of tender documents in pdf form which will be deducted offline while acceptance of tender.

MOGHA CONSTRUCTION COMPANY (BID ID -3512485)

M/s Pradeep Kumar (BID ID -3512322)

M/s Anil Kumar (BID ID -3507036)