Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹32.0 L+₹3.8 L (13.5%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹33.1 L+₹4.9 L (17.4%)Rejected-Finance 275 GOLE BUILDING ROAD 1ST B ROAD SARDARPURA JODHPUR RAJ 342003 | JODHPUR | RAJASTHAN | 342003 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | Rejected-Technical OPP INCOME TAX OFFICE PAOTA C ROAD JODHPUR 342001 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342001 | - | Rejected-Technical Not Recommended as not enlisted in cat a(v) |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
16 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR-342010
REPAIR TO JOINTS AND CRACKS USING EPOXY RESIN MOTOR AND APPLICATION OF PME ON FLEXIABLE PORTION AT NAGTALAO UNDER GE BANAR JODHPUR
2022_MES_558131_1
82223/51/E8
Open Tender
Civil Works - Roads
Item Rate
150 days
BANAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE BANAR
₹80,000
Yes
20 Jan 2023
17 Oct 2022
19 Nov 2022
17 Oct 2022
16 Nov 2022
2 Nov 2022
18 Oct 2022 - 1 Nov 2022
Amount
M&L for surface dressing not exceeding 15 cm deep in soft/loose soil including cleaning away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees not exceeding 30 cm girth and removing rubbish upto a distance of 50 m outside the periphery of the area complete all as specified and as directed.
M&L for cleaning the surface with compressed air and making the surface free from dust by using brush and applying one coat of cold polymer Modified bitumen emulsion (PMBE) by using self propelled bitumen emulsion distributor or towed bitumen emulsion pressure sprayer, equipped for spraying the material (binder) uniformly and mopping of diluted liquid in the ratio 1:1 of PMBE and water by weight at the rate of minimum 0.50 Kg of PMBE (ie 1.0 kg of diluted liquid) per sqm in one coat and ensure uniform finish of runway complete all as per manufacturers instructions and all as specified and as directed by Engineer in Charge. (Make : Hincol CQS1h or techno commercially equivalent product of Shell India Markets Pvt Ltd as specified and approved by GE). Note:- No extra amount will be paid to the contractor if excess quantity of PMBE used by the contractor than specified quantity in the item.
M&L for preparation of joints and cracks prior to overlay/surface treatment. Remove all vegetation and debris from cracks to a minimum depth of 25 mm. dusting with air jets, treat the specific area with appropriate crack sealing material prior to application of slurry seal as directed and specified by the Engineer--in-charge. Fill all the cracks 4-6 mm wide, along with soft or sunken spots, indicate that the pavement or the pavement base should be repaired or replaced as stated below. Cracks and joints shall be filled as per latest MORTH specifications with a mixture of slow setting cationic emulsified bitumen type SS-2, water(6-12) %, filler (1-2) %, aggregate and additives(0.5-2.0)%. The quantity of slurry seal shall lies from 8.4 to 9.8 kg/m2 and residual binder content shall lies from 7.5 % to 13.5 % (% by weight of dry aggregate) . The aggregate shall consist of crushed stone dust, clean, sharp, hard, durable and uncoated dry particles and free from soft pieces, organic and other deleterious substances or other material that will cure to form a hard substance complete all as specified and as directed:-.
The combined gradation shall be as shown in the following table. Gradation Sieve Size Percent Passing 3/8 in (9.5mm) - 1/4 in (6.3mm) 100 No. 4 (4.75 mm) 90-100 No. 8 (2.36 mm) 65-90 No. 16 (1.18 mm) 45-70 No. 30 (600 μm) 30-50 No. 50 (300 μm) 18-30 No. 100 (150 μm) 10-21 No. 200 (75 μm) 5-15
Tack coat is required if the surface is extremely hungry and dry all as directed and specified by Engr-in-charge. The proportions of slow setting cationic bitumen emulsion and aggregate shall be determined in the field and may be varied to facilitate construction requirements. Normally, these proportions will be approximately one part slow setting cationic bitumen emulsion to five parts aggregate by volume. The material shall be poured or placed into the joints or cracks and compacted to form a void less mass. The joint or crack shall be filled to within +0 to -1/8 inches (+0 to -3 mm) of the surface. Any material spilled outside the width of the joint shall be removed from the pavement surface prior to constructing the overlay. Where concrete overlays are to be constructed, only the excess joint material on the pavement surface and vegetation in the joints need to be removed.
M&L for Cutting grass and ploughing of soft ground arresters around runway and taxi track by deploying tractor with jungle jim/ plougher and a driver complete all as specified and as directed by Engineer in Charge.
S&F Marking Board made of compressed aluminum sheet of 4mm thick, blackodised on one side and the marking of the number/letter with red retro reflective film on black background comply with ADM part 6 on other side, duly supported in a frame with supports made out of aluminum extrusion sections, embedded 60cm below and 10 cm above GL with suitable size of foundation in PCC 1:4:8, type D2 using 40mm graded stone aggregate including necessary earth works etc complete all as specified and as directed by Engineer in Charge.
M&L for Raking out sealing compound (Grade 'B' or Polyurethane sealant) from existing expansion joints of dimension 25 mm to 30 mm wide and 40 mm deep, removing the debris from site by sweeping the concrete surface with brooms, cleaning with compressed air, treating sides and bottom of the joints with primer as per manufacturer's directions and filled with preformed closed cell polyethylene backup rod/strip of 25/32 mm dia, sealing with pitch free polyurethane grey sealant (minimum depth of sealant above backup rod shall be 10 mm) conforming to BS-5212 (Type FB) including applying masking tape on edges of joints to prevent accidental spillage of sealant and removing the masking tape after application of sealant complete all as specified and as directed
All as per item No 6 above but construction/dummy joints of dimension 20 to 25 mm wide and 40 mm deep
All as per item No 6 above but construction/dummy joints of dimension 15 to 20 mm wide and 30 mm deep
All as per item No 6 above but construction/dummy joints of dimension 8 to 15 mm wide and 25 mm deep
M&L for cutting/chipping off carefully the cracks of runway/taxi track (hard concrete surfaces) in uniform width of cross sectional area with depth of 20 to 25mm, cleaning all dust, mud etc. Priming the cut portion of concrete surfaces with Flexopatch of Make :M/s Chowksy or techno commercially equivalent make and filling the cut portions of cracks to the required level to match with existing surfaces of concrete slab/ pavement with flexopatch mortar of Make :M/s Chowksy or techno commercially equivalent complete all as specified and directed by Engr-in-Charge.
Clearing the runway drain by plaughing by manual means and clearing away all grass vegetation from roots, spallings, shrubs, brushwoods, undergrowth, roots and trees not exceeding 30 cm girth (measured on one meter above ground level) and desilt the drain 15cm deep and removing rubbish upto a distance exceeding 250m but not exceeding 500m outside the periphery of the area under clearance complete all as specified and as directed.
Desilting of soil by excavating n exceeding 1.5 m deep and getting out in soft soil and removing excavated material exceeding 250m and n exceeding 500m and depositing where directed at a level n exceeding 1.5 m above the starting point complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L for boulder pitching, laid dry, hand packed tightly grouted with cement mortar 1:6 complete all as specified and directed by Eng-in- Charge.
M&L for PCC 1:3:,6 Type C1 using 20 mm graded stone aggregate as in coping etc and like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary formwork complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Eng-in-Charge.
M&L for rendering 10 mm thick in cement mortar 1:4 on stone masonry surface or surfaces other than fair face of brickwork or on side of lathing complete all as specified and directed by Eng-in-Charge.
M&L for removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers any number of coats, any width or girth all as specified and directed by Eng-in-charge
M&L for preparation old treated road or concrete surfaces of any description over 10 cm girth or width, not otherwise described and applying a coat of plastic emulsion paint complete all as specified and directed by Eng-in-charge.
M&L for preparation of new surfaces of brick, stone, concrete asbestos cement or plaster surface of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over one coat of primer complete all as specified & directed by Eng-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed.
M&L for 100 mm thick PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in sub floors, sub bases, floors and pavings etc complete all as specified and directed..
M&L for sand filling, spreading, levalling, ramming in floors etc or in foundations including watering and consolidation complete all as specified and as directed.
M&L for 80mm thick Machine pressed precast concrete interlocking paver blocks, any shape and size with gray cement and pigment in M-40 Grade, confirming to IS 15658-2006 complete all as specified and directed.
M&L for factory made kerb stone of M-25 grade cement concrete, laying at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) and making drainage opening wherever required complete all as specified and as directed.
M.A. MUNSHI AND CO.
JANGID BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .