Check am thehra Nallah

Amount

Excavation in foundation, trenches etc. in earth work in all kinds of soil lift upto all height, stacking the excavated soil not more then 3 mtrs. clear from the edge of excavation & then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all surplus excavated earth as directed within all leads and lifts.

(i) Pick Jumper work.

Providing and laying cement concrete 1:1.5:3 (One cement:one & half sand:three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-.

Foundation, footing bases of columns and the like and mass concrete within all leads and lifts

Wall (any thickness but not less than 0.10 mtrs.thickness) attached pillasters, buttresses plinth & string courses etc. from top of foundation level upto floor two level within all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battons and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00mtrs. and removal of the same for in-situ-reinforced and plain concrete work in:-

Vertical surface such as walls (any thickness) partitions and the like including attached pillasters,buttresses, plinth and string courses and the like within all leads and lifts.

Providing and fixing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level within all leads and lifts .

Providing and fixing of MS cover on chamber with MS sheet of 2.00 mm thickness fixed with angle iron frame of 25x25x3mm having locking arrangement complete with a size of 0.80mx0.80m complete in all respect within all leads and lifts.

Providing and fixing screwed type cast iron Air valve (single ball type) of Leader make confirming to BIS 1452-90 with upto date ammendments as per class PN 1.00 to withstnd the seat pressure of 11.22 Kg/cm2 in raising main or as of latest ammendments complete in all respect within all leads and lifts.

50mm dia

Laying Jointing and testing of HDPE pipe of grade PE 80 following dia and pressure complete in all respect incluidng fittings and accessories complete in all respect within all leads and lifts.

75mm dia (OD) 4.00Kg/Sq.cm

90mm dia (OD) 4.00Kg/Sq.cm

110mm dia (OD) 4.00Kg/Sq.cm

125mm dia (OD) 4.00Kg/Sq.cm

140mm dia (OD) 4.00Kg/Sq.cm

Providing and Fixing 50mm hydrant including GI riser pipe , 50mm gun metal control valve, 50mm pump connecting nipple, plain concrete grouting for GI tee, connecting riser pipe with sub main incluidng complete set of fitting etc. complete in all respect within all leads and lifts.

Providing & fixing of Kirloskar/Leader make Cast Iron sluice valve following dia Class-PN-1.0 with M.S.flange table-5 conforming to IS:14846-2000 latest with uptodate ammendments having seat pressure 10.20Kg./cm2 including nut, bolts and gasket sheet complete in all respect within all leads and lifts.

80mm dia

100mm dia

125mm dia

150mm dia

Providing and supplying of duly coupled 63mm HDPE based portable sprinkler pipes( IS: 14151-I marked) to withstand pressure of 3.20 Kg/cm2 complete in all respect within all leads and lifts.

6mtr long

3 mtr long

Providing and fixing 63mm duly coupled bend complete in all respect within all leads and lifts.

Providing and fixing tee of 63mm x 63mm x 63mm complete in all respect within all leads and lifts.

Providing and fixing end cap , 63mm complete in all respect within all leads and lifts.

Vijay kumar kushwaha

M/S VIKAS CONSTRUCTION