NEW FURNITURE FOR PROVN OF DEFI OTM ACCN OF 342 FD REGT AT MIL STN DHRANGADHRA

Amount

SCH 'A' PART-I (WOODEN FURNITURE)

BATH MAT (FD/E6/MAP/07). DIMENSION: The size of the bath mat shall be 400mm L x 300mm W x 250mm H. DESCRIPTION: The Bath Mat PVC shall be made up of 5mm thick PPCP material. The bath mat shall have centre leg of dia 25mm. The four legs shall be in arc shape and of size 10mm x 100mm. The top of the bath mat shall have 3mm x 10mm thick stiffener moulded along with the seat in single piece underneath. The weight of the bath mat shall not be less than 1.3 kgs. Make - AMKO or equivalent

CHAIR EASY (FD-229). DIMENSION: Overall size shall be 510mm long, 575mm wide and 720mm high. DESCRIPTION:- All wood shall be first class teak (MP). Front legs shall be 30mm x 55mm in section and 355mm high upto seat level. Rear legs shall be of 30mm x 55mm in section and 300mm high upto seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mm x 55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mm x 55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mm x 100mm in section out of 60mm x 100mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mm x 100mm in section joined together by vertical side rails of 30mm x 25mm in section teak wood to form the frame Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern. PVC shoes 25mm x 25mm shall be provided at the bottom of all legs. FINISH:- All wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer finish.

TABLE WRITING (FD-275). DIMENSION: Overall size shall be 1145mm long, 600mm wide and 760mm high. DESCRIPTION: All wood shall be of first class hard teak wood except top and right hand side drawer cabinet. Legs shall be of 35mm x 55mm in section and 717mm high having 5mm x 5mm in section groove at the top of legs at the portion when placed in position. Top of table shall be of 18mm thick pre-laminated MDF board with 4mm teak wood edging al-round the top of table.Two short stiffeners of teak wood of size 50mm x 40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. Sides of the box which house the drawer and cabinet shall be 18mm thick prelaminated particle board exterior grade. Sides and back of drawers shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6mm thick plywood commercial. 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter. 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. FINISH: All wood surfaces shall be French polished with high gloss finish. Rest all as per drg.

TEAPOY WOODEN (FD-382). All as shown on drawing. Overall size shall be 600mm long, 450mm wide and 540mm high. All wood shall be of first class hardwood teak (MP) Legs shall be of 45 x 45mm insection at top and 25mm x 25mm in section at bottom made to shape as shown on drawing 19mm x 40mm in section top rails shall be provided at short and long sides joining legs at the top. Top shall beof 19mm thick pre-laminated particle board teak veneer face. 3mm thick teak wood edging shall be provided al round the top of table. Top shall project 75mm on long and shortsides. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish.

TABLE DINING 8 PERSONS (FD-273). DIMENSION: Overall size shall be 1800mm long, 900mm wide and 750mm high. DESCRIPTION: All wood shall be of first class teak wood (MP). The top shall be of prelaminated MDF board of 18/19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only. Four legs shall be 90mm X 45mm in section and 750mm high. Legs shall be joined by 45mm X 90mm teak wood rails in long and short sides at top in such a way that top of legs and top of rails shall be at one level. 25mm X 45mm teak wood wooden member of size 900mm long shall also be provided as shown in drg. Two stiffeners of 90mm X 25mm in section shall be fixed equally spaced joining the long rails with dove tailed joints. Four wooden brackets/ corners of size 100mm x 100mm x 35mm thick shall also be provided over 150mm x 30mm x 5mm angle iron bracket. 25mm X 25mm PVC shoes shall be provided at the bottom of the table. Rest all as per drgs. FINISH: All wood surfaces exposed to view when placed in position shall given high gloss French polish with lacquer finish.

TABLE CENTRE 900 X 450 X 400 (FD-274). DIMENSION: Overall size shall be 900mm long, 450mm wide and 400mm high. DESCRIPTION: All wood shall be of teak wood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top. Legs shall be made out of 60mm x 30mm in section teak wood and 356mm high. Bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated particle board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of both the tops. 25mm dia hard rubber/ PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. FINISH: All wood surfaces shall be French polished with high gloss finish. Rest all as per drg.

DESK WITH DIAS (FD-399). DIMENSION:- The overall size of dias shall be 2700mm x 2500mm x 200mm and desk shall be 1220mm high x 760mm wide at top and 635mm wide at bottom x 600mm deep. DESCRIPTION:- The wood for dias shall be teak/ sheesham. The top of the desk shall be of 25mm thick MDF board. The four side rails and inner two cross rails shall be of size 40mm x 80mm.The other inner rails shall be of size 30mm x 50mm. The nine legs shall be of size 100mm x 100mm and other 75mm x 75mm as shown on drg. The desk shall be made of 12mm thick prelaminated MDF board with teak wood base. The desk shall be provided with 16mm thick teak wood foot rest. The top shall also be of 18/19mm thick prelaminated MDF board and shall be fixed with countersunk wooden screws duly fixed with electric screw driver. All dimensions and fittings shall be in accordance to drgs. Rest all as per drg. FINISH:- All wooden surfaces of dias shall be painted with high gloss finish with desired colour after preparation of surfaces.

POINTER MEDIUM (FD-1041). DIMENSION: The total length of pointer shall be 1200mm long. DESCRIPTION: The pointer shall be made of teak wood 1st class in shape duly grinded and smoothened. The dia of pointer at top shall be 25mm and at base shall be 10mm.The base shall be fixed with 50mm long stainless steel cup made to shape as shown on drg. Rest all as shown on drg. FINISH:- All wood surfaces exposed to view when placed in position shall be painted in black with high gloss finish.

POINTER LONG (FD-1041). DIMENSION: The total length of pointer shall be 1525mm long. DESCRIPTION: The pointer shall be made of teak wood 1st class in shape duly grinded and smoothened. The dia of pointer at top shall be 25mm and at base shall be 10mm. The base shall be fixed with 50mm long stainless steel cup made to shape as shown on drg. Rest all as shown on drg. FINISH:- All wood surfaces exposed to view when placed in position shall be painted in black with high gloss finish.

POINTER SMALL (FD-1041). DIMENSION: The total length of pointer shall be 900mm long. DESCRIPTION: The pointer shall be made of teak wood 1st class in shape duly grinded and smoothened. The dia of pointer at top shall be 25mm and at base shall be 10mm. The base shall be fixed with 50mm long stainless steel cup made to shape as shown on drg. Rest all as shown on drg. FINISH:- All wood surfaces exposed to view when placed in position shall be painted in black with high gloss finish.

TABLE 90 X 60 CM WITH DRAWER (FD-284). All as shown on drawings. Overall sixe shall be 900mm long. 600mm wide and 760 mm high. All wood sized shall be of first class hard wood teak (MP). Legs shall be of 60mm x 30mm in section throughout and 741mm high, four in number joined together in front, back and side with top rails 20mm x 60mm in section provided flush with top of legs. At bottom, 100mm high, four in numbers joined together in front back and side with top rails 20mm x 60mm in section provided flush with top of legs. At bottom, 100mm high from bottom/ side wooden lower rails of 230mm x 60mm in section shall be provided in short sides joining legs in short sides. 5mm x 5mm in section grooves shall be provided in legs at top of legs in portion visible to view when placed in postion. The top shall be 16mm thick particle board commercial over which 1.5mm thick plastic laminated sheet shall be fixed with favicol irrespective of what is shown of drawing. 4mm thick teak wood edging shall be provided all-round edged of top of table. The top of table shall be flush with legs and there shall be on projection on ant sides. All wood surface exposed to view when placed in position shall be french polished with high gloss finish. Hard rubber/ PVC shoes of 25mm dia and 25mm high shall be screwed to bottom of all legs".

CHAIR WOODEN BOTTOM (FD-285). DIMENSION:- Overall size shall be 445mm long,440mm wide and 835mm high. DESCRIPTION:- Timber shall be seasoned teak wood Ist Quality. Front legs shall be of size 30mm x 55mm in section and 435mm high and rear legs shall be of section 30 x 55mm and 815mm high. The legs shall be joined by front, sides, rear rails made to shape out of 30mm x 65mm in section. Two side stiffeners in short rails shall be provided of 20mm x 25mm in section. One stiffener of 20mm x 25mm shall also be provided at centre of both side stiffeners joining the sides stiffeners. 12MM thick decorative plywood with perforated holes 5MM dia at centre in a radius of 5 inch shall be fixed over the frame of the chair irrespective of what is shown on drg. All Diamensions, shape and size shall be followed as per drg. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg. FINISH:- All wooden expose surfaces shall be french polished two coats after preparation of surfaces.

HAT STAND WITH MIRROR (FD-233). DIMENSION: Overall size shall be 1330mm long, 710mm high. DESCRIPTION: The inner frame shall be of 50mm x 20mm teak wood battens six in nos. Looking glass: 5.0mm thick looking mirror. The back and front of frame shall be covered with 6mm thick commercial ply. The edges of the frame sh FINISH: All teak wood surfaces shall be given high gloss French polish with lacquer finish. All steel surfaces shall be painted with two coats of enamel paint over one coat of primer. Rest all as per drg.

SCH 'A' PART-II (STEEL FURNITURE)

CHAIR WRITING (FD/E6/MAP/12). DIMENSION: The overall size of the chair shall approx be 950mm high, 500mm wide DESCRIPTION: It shall be of trade pattern and of one make and model as described. The size/ dimensions of the chair shall meet the overall specification as described. The frame of the chair shall be of MS tubular frame powder coated, cantilever type of size 25mm x 10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back. Arm rest shall be of black integral skin poly urethane with shore “A” hardness and reinforced with MS insert. It shall be scratch and wheather resistant. Both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. FINISH: Pre treated with epoxy powder caoted oven baked with ivory white colour/ white/ warm grey. Make/ Model No - Geeken Model No GB-406/ Make-Supereq Model No E-104/ Make-Methodex model No X-103

BED HARD (FD/E6/MAP-II/08 ® ). Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mm x 38mm MS square pipe. 18mm x 18mm MS square pipe shall be provided in the inner of head board frame/ foot board frame as shown in drg.18mm thick both side decorative prelaminated particle board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board/ foot board. 25mm x 65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg. One stiffener of size 25mm x 25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mm x 25mm No X-103 bottom of legs. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and externally with spray machine after preparation of surfaces.

RACK SHOE STEEL (FD/E6/MAP/02R). DIMENSION: Over size 700mm long, 300mm wide and 880mm high. DESCRIPTION: The Legs of the shoe Rack shall be of 25mm dia MS Pipe of 18 Gauge. The five shelves of the Rack shall the of 20mm dia MS Pipe of 18 Gauge Welded to Lage. The Shelves shall have 3mm dia MS Road 9 Nos in Widthwise and 3 Nos in Length wise welded to 20mm dia shelf fram. FINISH:- Pre treated with epoxy powder coated oven baked with ivary white colour/ white/ Warm grey.

CHAIR CB STEEL WITH ARMS (FD-75 (M)). DIMENSION: Overall size shall be 535mm wide,560mm deep and 900mm high. DESCRIPTION: Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm Welding of frame where required shall be as directed by GE/ BSO and in running welding grinded to give smooth surface. The seat and back frame of the chair shall be made up of quality sheesham wood in natural polish with polythene cane in godrej pattern confirming to IS-5378:94(Type-I) of durable quality. The wooden seat frame shall be further supported by steel strips measuring 19mm x 3mm at the front and the rear and each strip shall be welded to ERW frame.The seat and back shall be fixed by providing suitable nut bolts and washers.The arms shall be of PPCP material in lieu of wooden and shall be fixed with screws from beneath. Weaving of cane shall be done with premier or shah brand plastic cane in godrej pattern. Cane shall be 2mm wide and 0.4mm thick, Gola type weighing not less than 6 gms/10 RM. Bottom of legs shall have hard rubber shoes. FINISH: All iron surfaces exposed to direct view shall be painted with two coats of enamel grey paint over one coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieve smooth surfaces.

TABLE COMPUTER (FD/E6/MAP/03). DIMENSION:- Overall size of top shall be 900mm long, 561.20mm wide and 750mm high. DESCRIPTION:- All prelaminated particle board used in manufacturing of top, shelves, drawers, tray shall be of 18mm thick prelaminated MDF board. The frame of table shall be of 25mm square pipe of wall thickness not less than 1.6mm. The top of table shall be provided with 4mm thick teak wood beading. The legs shall be made out of 25mm x 50mm MS rectangular CR pipe of 18 guage. Each leg shall be provided with rectangular PVC cover made to shape on front sides only. The drawers shall be provided with telescopic channel 300mm long. The legs shall also be provided with nylon buffers. Rest all as per drg. FINISH:- All wood surfaces shall be French polished with high gloss finish. Rest all as per drg.

CHAIR REVOLVING STEEL (FD/E6/MAP/01). The Base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. The pedestal assembly shall be provided with injection molded in black 30% glass filled nylon. A 10.5mm dia forged bright Zinc plated MS Castor Pin is of press fitted into each prong for holding the castors. The seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping allround. The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. It shall be scratch and weather resistant. Rest all as per drg and as per sample approved by BSO/ GE.

TABLE OFFICE CLERK STEEL (FD-1004). DIMENSION: Overall size shall be 1200mm long, 610mm wide and 760mm high. DESCRIPTION: Steel frame shall be of size 1160 x 570 x 742mm. four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm in long and short sides. Two short stiffeners of same size shall be provided at 130mm from bottom of legs. One long stiffener shall also be provided to the middle of short stiffeners. Three drawers of equal size shall be provided on the right hand side above the stiffener at 130mm high with overall size of 350mm wide and 430mm high and 410mm deep. The top of table shall be provided with pre-laminated MDF board of 18/19mm thick with teak veener shade and 4mm thick teak wood edging alround the table. Hard rubber/ PVC toes shall be provided to the legs. Locking device shall be provided to drawers. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces. A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine. Rest all as per drg.

CHAIR CB STEEL WITH CUSHION (FD-75 (M)). DIMENSION: Overall size shall be 535mm wide, 560mm deep and 900mm high. DESCRIPTION: Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm Welding of frame where required shall be as directed by GE/ BSO and in running welding grinded to give smooth surface. seat and back shall be provided with cushion duly covered with leatherite and mounted on 10mm thick commercial ply with TW frame. The wooden seat frame shall be further supported by steel strips measuring 19mm x 3mm at the front and the rear and each strip shall be welded to ERW frame.The seat and back shall be fixed by providing suitable nut bolts and washers. The arms shall be of PPCP material in lieu of wooden and shall be fixed with screws from beneath. Bottom of legs shall have hard rubber shoes. FINISH: All iron surfaces exposed to direct view shall be painted with two coats of enamel grey paint over one coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieve smooth surfaces.

DESK STAND LECTURE (FD-1022). DIMENSION: Over all size shall be 970mm wide and 1220mm high. DESCRIPTION: Two upright of mild steel rectangular tube of 75mm x 25mm of 1202mm high shall be provided in rear side and shall be 635mm apart. The two upright shall be joinded with bottom, middle and top rails with 75mm x 50mm mild steel tube of wal thickness 1.6mm. The two sides rails at bottom fixed at 125mm from bottom shall be 430mm long 75mm x 50mm mild steel tube of wall thickness 1.6mm and shall form the part of bottom rails and join the long side of bottom rail of size 785mm long. All edges of pre-laminated particle board remained exposed shall be covered with teak wood edging as per the size of board edging. FINISH: All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over one coat of primer with spray machine after preparation of steel surfaces and all wooden surfaces shall be melamine polish with lacquer finish as approved by Engr-in-Charge. Rest all as per drgs.

CHAIR CBA SPECIAL WITH HAND REST (FD-120 (M)). All as shown on drawing. Legs and frame shall be of 19mm square mild steel tube of wall thickness. 1.6mm wood shall be of first class hard wood teak (MP). Cane for seat and back shall be 0.4mm thick & 2mm wide weighting not less than 6gm per ten running metre and weaving shall be done in Godrej pattern. 20mm thick teak wood plank in one piece shall be provided on right hand side while sitting on chair and shall be hinged on arm rest with plano hinge. 20mm thick teak wood arm rest out of 50mm x 255mm screwed to legs, on the left side of chair while sitting on chair, shall be provided as shown on drawings. All steel and iron surface shall be given two coat of enamel paint over one coat of primer after preparation of surface. All wood surface shall be french polished with high gloss finish. Hard rubber of PVC shoes shall be provided at the bottom of legs.

DISPLAY BOARD (FD-99). BOARD NOTICE 900MM X 600MM Overall size shall be 900mm long 75mm deep and 600mm high. 25mm x 75mm particle board frame of commercial face with 6mm thick MDF edging all-round shall be provided as shown on drawing, 19mm thick soft wood board shall be fixed in side the frame over which best quality green baize cloth shall be fixed as shown on drawing. Aluminum flat of 63mm x 3.25mm shall be provided al-round at the back of the board. On front side 22mm x 10mm aluminum channel shall be provided in side of particle board frame to house 4mm thick glass shutter. Rest all as per drg.

TABLE CONFERENCE/ LIBRARY (FD-287). Over all size shal be 2135mm x 1065mm x 760mm. Size of frame shall be 1755mm x 825mm x 742mm. Legs shall be four in numbers and shall be of 32mm square mild steel tube of wall thickness 1.6mm. Legs shall be welded at top with top rails in long and short side with 32mm square mild steel tube of wall thickness 1.6mm to make the frame of size 1755mm x 825mm x 742mm. Stiffeners in the middle of top rails shall be provided as shown on drawing with 32mm square mild steel tube of wall thickness 1.6mm. One Long stiffener shall be provided joining short stiffeners in the middle with 32mm square mild steel tube of wall thickness 1.6mm. All welding shall be done with continuous welding in accordance with standard workmanship and specification. Top of table shall be 18/19 mm thick particle board pre-laminated with teak veneer shade on to of size 2135mm shall be provided as shown on drawing irrespective of what is specified is not no.8 of the drawing. 18mm x 50mm of MDF edging shall be provided alround the top tray machine to achieve smooth surfaces. FINISH:- All iron surfaces exposed to direct view shall be painted with two coats of enamel grey paint over one coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieve smooth surfaces left corner of front shutter with visible colour.

ALMIRAH LARGE STEEL WITH SHELVES (FD-1031). DIMENSION:- Overall size shall be 1985mm high, 920mm wide and 485mm deep. DESCRIPTION:- The base shall be made of two numbers mild steel sheet channel bases made in U shaped with ends covered. Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be upto full width of 485mm and shall be 100mm high Top, sides bottom and back of almirah shall be of 1mm thick mild steel sheet. Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. Front shutter shall two leaves of equal size. Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship. HANDLE: One chromium plated steel handle with a locking device shall be provided as shown on drawing. LOCKING DEVICE: The locking device shall be three way locking device and shall also be provided with decorative key plate. Make of Lock-Harrison/ Godrej. FINISH:- All CRCA members shall be pre-treated with powder coating 70 microns by 7tank. Process and oven Dried internally & externally with the following specification. (i) Dry film thickness more than 45 microns. (ii) Salt Spray test to with stand as per standards. (iii) Adhesion as per standards. (iv) Pencil scratch hardness as per standards.

STOOL STEEL (FD-81 (M)). DIMENSION: Over all size shall be of 305mm x 305mm x 510mm. DESCRIPTION: 18 Gauge MS sheet for top and angular frame shall be provided. The top shall be made out of 1mm MS sheet. All Dimensions, shape and size shall be followed as per drg. FINISH: Paint synthetic enamel colour olive green 1st class shall be used two coats over one coat of primer (internal and external).

TABLE 3' X 2' WITH DRAWER (STEEL) (FD-1008). DIMENSION: Overall size shall be 900mm x 600mm x 760mm. DESCRIPTION: Steel frame shall be of 800mm x 500 x 742mm. Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm top rails on long and short sides. Two short stiffeners joining legs in short sides at 100mm from bottom of legs shall be provided with 25mm square mild steel tube of wall thickness 1.6mm. One long stiffener shall be provided in the middle of short stiffener joining short stiffeners with 25mm square mild steel tube of wall thickness 1.6mm at 100mm from bottom of legs. A drawer on left side of table near top stiffener shall be provided of size 350mm x 130mm and 500mm deep with locking arrangement and recessed handle. Mild steel sheet used for drawers shall be of 1mm thickness.Top of table shall be of 18mm thick pre-laminated particle board of walnut shade and 4mm teak wood edging al-round the top of table. PVC/ Hard rubber toes shall be provided to the bottom of legs. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and externally with spray machine after preparation of surfaces. A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine. Rest all as per drg.

ALMIRAH MEDIUM STEEL WITH SHELVES (FD-1032). DIMENSION: Overall size shall be 1270mm high,765mm wide and 440mm deep. DESCRIPTION: The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet. Front shutters shall have two leaves. All joints and welding, fixing shall be done according standard workmanship. HANDLE: A steel chromium plated handle 100mm long shall be provided to the shutter. LOCKING DEVICE: The locking device shall be three way locking device and shall also be provided with decorative key plate. Make of Lock-Harrison/ Godrej. FINISH: All CRCA members shall be pre-treated with powder coating 70 microns by 7tank. Process and oven Dried internally & externally with the following specification. (i) Dry film thickness more than 45 microns. (ii) Salt Spray test to with stand as per standards. (iii) Adhesion as per standards. (iv) Pencil scratch hardness as per standards

WORK BENCH WKSP STEEL 1800 X 900 X 760MM (FD-1024). DIMENSION:-Over all size shall be of 1800 x 900 x 760mm. DESCRIPTION:-Four legs shall be of 32mm square mild steel tube of wall thickness 1.6mm. Size of the steel frame shall be 1700mm x 800mm x 720mm. Legs shall be 720mm high. Top of legs shall be joined together in long and short sides with 32mm sq mild steel tube. Two Short stiffeners of 32mm mild sq steel tube shall be provided at 100mm from bottom of legs in short sides. A drawers shall be provided at right hand side of the table with locking arrangement, the drawer and bearer for drawer shall be made of 1mm thick MS sheet. Hard rubber shoe shall be provided for legs. The top of the table shall be of 40mm thick IInd class hard wood shisham/ sal wood and shall be given with three coats of Ist class oil paint over one coat of primer. FINISH:- Top shall be painted in colour with two coats of oil paint and steel portion shall be painted over one coat of primer on steel frame. All joints/ welding, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.

SCH 'A' PART-III (TP ITEMS)

CARPET 12' X 9' (TP) DIMENSION:- Overall size shall be 12 feet x 9 feet or not less than 55 sq feet. DESCRIPTION:- It shall be made up of wool/ linen material with different colour shades. The upper layer of pile shall be attached to the backing. The pile shall be of wool, polypropylene, nylon or polyester. The pile shall be in twisted tufts which shall be heat treated to maintain their structure.The nominal thickness of the carpet shall not be less than 6mm. As per sample approved by GE (Trade pattern). Make- Swayam/Aristrocrat/zesture or as per sample approved by GE.

RACK RIFLE FOR 20 RIFLES (TP). DIMENSION: Overall size shall be 2400mm x 430mm x 985mm. DESCRIPTION: The rifle rack for 20 rifles shall be made out of hard wood sheesham all over. The two side pillars or uprights shall be of size 75 X 125 X 985mm. The base shall be of size 100mm x 75mm and 280mm long. The bottom rifle boardings shall be of 40mm thick and 305mm wide made of sheesham wood fixed to base with screws with 20 notch to suit the butt of rifle.The size of each notch shall not be less than 55mm x 140mm. The upper rifle boardings shall be of 40mm thick and 110mm wide made of sheesham wood fixed to upright post 15mm deep. The upper boarding shall be provided with barcket out of 90 x 90 x 75mm fixed as shown in drg. The size of each notch shall not be less than 55mm x 140mm and. 25mm x 3mm flat iron stays fixed with 10mm dia bolts, nut and washers shall be provided to each upright. Rest all as per drg. FINISH: All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish and steel portion shall be painted in black after applying one coat of primer.

Pratik Enterprise