REPAIR TO JOINERY AND ANTI TERMENT OF CERTAIN BUILDINGS AT JAFFARPORE, KANCHRAPARA, LOS DUM DUM UNDER GE AF BARRACKPORE

Amount

Demolition of wall and ceiling boards (fibre, pulp insulation,etc.) or insulation boards/slabs/blankets any thickness, including cover filets complete all as specified and directed.

Dismanting of boarding of any description fixed in any position with screwes complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5sqm but n.exc 4sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1sqm and nexc. 2sqm each complete all as specified and directed.

Taking down shutters of any description n exc. 1sqm each complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), and removal of rubbish from the site complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish from the site complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.

Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 ltr per Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.

Material and labour for treatment of soil under existing floors using emulsion @ one ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with CM (1:2) (1 Cement : 2 Coarse Sand) to match the existing floors and making good disturbed portion etc complete all as specified and directed.

Material and labour for treatment of soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltr per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

Material and labour for providing chemical emulsion at points of contact for wood work @ 0.5 ltr per hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same and making good disturbed portion complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for cutting holes into or through brick wall built in cement mortar of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Material and labour for cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate ) as in bed block, filling of holes, coping & filling to PS frame etc. complete all as specified and directed.

Supply and fix 25mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix 2nd class hard wood 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile shall be as per IS : 1003 (Part I) complete all as specified and directed.

Supply and fix 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawing complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

Supply and fix solid PVC double door frame of size 50x95mm made out of 5mm plain colour PVC sheet reinforced with M.S tube complete all as specified and directed.

Supply and fix factory made 30mm thick PVC door wire gauze shutter, wire gauge shall be wraped on an additional square 8 mm M.S solid tube (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

Supply and fix factory made soilid PVC moulded door shutter, 30 to 35mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed.

Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

Supply and fix parliament hinges aluminium alloy anodised 100mm width of recess between flanges (when open) complete all as specified and directed.

Supply and fix 100mm size butt hinges extruded aluminium alloy with galvanised mild steel hinges pin anodised type B-21 complete all as specified and as directed.

Supply and fix 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

Supply and fix 150mm size aluminium alloy handles, fabricated type extruded section complete all as specified and as directed.

Supply and fix 125mm size aluminium alloy handles, fabricated type extruded section complete all as specified and as directed.

Supply and fix in repair aluminium handle fabricated type, anodised 150mm size complete all as specified and directed.

Supply and fix 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix in repair 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150mm long floor door stopper of aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and as directed.

Supply and fix 250mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fix in repair 250mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fix 125mm size hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix continuous (piano) hinges mild steel bright finish or electro galvanised of 30mm width of flaps (when open) complete all as specified and directed.

Supply and fix in repair stainless steel 20mm dia curtain rod including fixing brackets and knobs fixing at end of pelmet complete all as specified and directed.

Supply and fix door closer hydraulically regulated alumunium (extruded section body) designation No-3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Supply and fix in repair door closer hydraulically regulated alumunium (extruded section body) designation No-3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple complete all as specified and directed.

Supply and fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple complete all as specified and directed.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, complete all as specified and directed.

All as per item No 46.00 but without glazing bars and -ditto-.

Supply and fix pressed steel door frame size 165x60mm for door with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

Supply and fix steel door including projecting type hinges, steel handle,complete, with glazing bars, devetailed or welded complete all as specified and directed.

Supply and fix in repair collapsable steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Supply and fix in repair powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed. Note:- Minimum thickness of powder coating shall be 50 micron.

Supply and fix in repair powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. Note:- Minimum thickness of powder coating shall be 50 micron.

Supply and fix in repair powder coated anodised aluminium ventilator shutters, top hunge type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etccomplete all as specified and directed. Note:- Minimum thickness of powder coating shall be 50 micron.

Supply and fix in repair powder coated aluminium window shutter sliding type section not less than 0.55 Kg/RM, consisting three shutter two glazed and one gauged including joining cleat, glazing cleap,rubber packing aluminium snap beading,screws,locking arrangement complete all as specified and directed. Note:- Minimum thickness of powder coating shall be 50 micron.

Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

Material and labour for repair to aluminium window / door including necessary welding, riveting, easing drilling taking down replacement of unserviceable hanging devices making them in serviceable condition and refixing in same opening complete all as specified and directed. Note:- Quoted rate shall inclusive for supply and fixing of new hanging device as required.

Supply and fix in repair expanded metal (weight not exc 4 Kg per sqm), cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

Supply and fixi mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for mild steel work angle iron as in door frame (chowkhats) & cooler stand frame confirming to Fe-290 or Fe-165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

Supply and fix 12 mm thick veneer decorative ply wood (7 No of ply) garde 1(with BWR resin) with decoartive face on one face fixed with timber frame work with screws as in cub board shelves complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for vitrified ceramic tiles (premium quality) 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Materials and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including applying 3mm thick wall care putty complete all as specified and directed.

Materials and labour for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

Supply and fix 4.8mm thick clear tinted glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden window fixed with wooden bead and pin tacked complete all as specified and directed.

Supply and fix 3 mm thick figured glass pin headed type and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows / doors fixed with wooden bead and pin tacked complete all as specified and directed.

Supply and fix 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane including hacking out old broken glass complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

KUMAR ENTERPRISE

KAZI ENTERPRISE

BHAUMIK CONSTRUCTION

APOLLO TRADERS

CHANDRA CONSTRUCTION & CO.

VIVEKANANDA TRADERS

Das and Brothers