Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95.4 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹99.0 L+₹2.3 L (2.41%)Rejected-AOC D 89 SHASTRI NAGAR MEERUT UTTAR PRADESH PIN 250004 | MEERUT | MEERUT | UTTAR PRADESH | 250004 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹1.1 Cr+₹10.0 L (10.4%)Rejected-AOC 95 A GOVIND NAGAR RACE COURSE OPP GURUDWARA DEHRADUN UK PIN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹1.2 Cr+₹21.6 L (22.3%)Rejected-AOC H NO 670 SECTOR 10 PANCHKULA HRY 134115 | PANCHKULA | HARYANA | 134115 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹1.3 Cr+₹33.7 L (34.9%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
30 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Dehradun
HQ CWE Dehradun
ADDN / ALTN TO CADETS LIVING ACCN OF BLDG NO.P-7 AT RIMC UNDER GE (P) DEHRADUN
2024_MES_669824_1
9935/DDN(P)/E8
Open Tender
Civil Works
Item Rate
180 days
Dehradun
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
GE (P) Dehradun
₹2.1 L
Yes
6 Jan 2025
2 Sept 2024
2 Oct 2024
2 Sept 2024
30 Sept 2024
23 Sept 2024
Amount
Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.
Dismantling timber scantling 40 sq cm and over in section , in any position for unframed work complete all as specified and directed by Engr-in-Charge
Dismantling Mild Steel work of any description as in steel gate, post purlin, etc not otherwise provided for complete all as specified and directed by Engr-in-Charge
Dismantling of steel/galvalume sheets of any description (corrugated, semi corrugated, etc.)sheets in roof coverings complete all as specified and directed by Engr-in-Charge
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm and n exc 4.00 sqm each complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed.
Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.
BLANK
M&L for 8-10 mm thick double charged/Ultra charged vitrified dark/light shade/coloured tiles (square/ rectangular) as directed, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm fixed in floors using 3mm spacer for joints, set and jointed in neat cement slurry and filling/grouting joint with epoxy grout mix of desired shade over 15 mm thick screed bed/ bedding layer in cement mortar (1:6)” including demolition of existing flooring complete all as specified and directed.
M&L for 8-10 mm thick double charged/ ultra charged vitrified dark/light shade/coloured tiles (square/ rectangular) as directed, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm sqm, on vertical surface etc using spacer for joints of desired thickness, set and jointed in neat cement slurry and filling/grouting joints with epoxy grout ,mix of desired shade over 10mm thick rendering in cement mortar (1:4) finished fair & rough to receive tiles including dismantling of existing skirting complete all as specified and directed.
M&L for 8-10 mm thick Full body vitrified light/dark shade/coloured tiles (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed/ bedding layer in cement mortar (1:6)” including demolition of existing flooring complete all as specified and directed.
M&L for 8-10 mm thick Full body polished vitrified light/dark shade tiles (square/ rectangular) as directed, area of each tiles exceeding 0.36 sqm but n exc 0.42 sqm , on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar (1:4) finished fair & rough to receive tiles complete all as specified and directed.
M & L 16 to 18 mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in floor/kitchen platform/dado/skirting, counter top WHB including cutting holes for oval shape WHB/steps /urinal partitions etc. in horizontal or vertical surfaces including grinding the edges half round and polishing over 15mm thick screed bed or bedding layer in cement mortar (1:6) including dismantling of old stone slab/tiles complete all as specified and directed by Engineer-In- Charge.
M& L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.
M&L for 10-12mm thick heavy duty full body vitrified exterior coloured tiles (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm , in floors/skirting /riser/dado/treads etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed/ bedding layer in cement mortar (1:6)” including demolition of existing flooring complete all as specified and directed.
M&L for brick work with old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note:- Water Proofing compound shall be measured and paid separately.
M&L for rendering 5 mm thick in CM 1:3 as on concrete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT felt exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed
M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
M&L for cement concrete 1:2:4 type, B0 using 12.50 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including smooth finish with using extra cement including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed . Notes :- Rates includes to carry out the work on roof slab of building nothing extra shall be admissible on this account
M&L for water proofing treatment to RCC roof by APP based modified polymeric membrane prefabricated in five layers ( weight not less than 3.6 Kg/Sq mtr) as following steps :- (a) The surface of roof, parapet and gutters, drain mouth etc over which water proofing treatment is to be applied shall be cleaned off all foreign matters such as fungus, moss, dust etc by wire brushing and dusting. For cast iron drain out lets a groove shall be cut aroud to tuck in the treatment. Concrete angle fillets shall be provided at junctions between roof and vertical face of wall (parapet and other walls) around obstacles such as pipes, chimney stacks etc and similar situation to ease up around corners. (b) Bituminious primer conforming to IS: 3384-1965 @ 0.30 Kg/Sqm to be applied on prepared surface till the surface is properly impregnated. (c ) Apply a coat of Bitumen 85/25 grade @ 1.20 Kg/Sqm over primed surface. (d) Over the coat of Bitumen as above APP modified polymeric membrane (weight not less than 3.6 Kg/Sqm), unrolled and bonded completely to the subtrate with side lap of 75 mm and end lap of 100mm. The overlap then sealed/fused by flame or bitumen as per manufacturer instructions. A coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane and finally it will be finished with a coat of aluminium paint @ 0.20 Kg/Sqm as per manufacturer instructions complete all as specified and as directed. Notes :- Rates includes to carry out the work on roof slab, nothing extra shall be admissible on this account
S & F 1st class hard wood (Teak) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, Famed and manufactured in situ. Note :- The contractor shall bring the trunk of appropriate size as per direction of Engineer in charge at site and necessary cutting and manufacturing shall only be done at site. No factory made material shall be allowed.
S & F 35 mm thick 1st class hardwood (Teak) manufactured in situ Glazed and skeleton shutters( single/ double), open rebated and prepared to receive glass, gauze, etc divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a). Note :- The contractor shall bring the trunk of appropriate size as per direction of Engineer in charge at site and necessary cutting and manufacturing shall only be done at site. No factory made material shall be allowed.
S & F 35 mm thick 1st class hardwood (Teak) manufactured in situ Plain, framed, panelled shutters ( single/ double) (any number of panels), with panels of timber flat on both sides (feather edged) sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b). Note :- The contractor shall bring the trunk of appropriate size as per direction of Engineer in charge at site and necessary cutting and manufacturing shall be only done at site. No factory made material shall be allowed.
S & F 30 mm thick 1st class hardwood (Teak) manufactured in situ Plain, framed, panelled shutters ( single/ double) (any number of panels), with panels of timber flat on both sides (feather edged) sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b). Note :- The contractor shall bring the trunk of appropriate size as per direction of Engineer in charge at site and necessary cutting and manufacturing shall be only done at site. No factory made material shall be allowed.
S & F 30 mm thick 1st class hardwood (Teak) manufactured in situ Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b). Note :- The contractor shall bring the trunk of appropriate size as per direction of Engineer in charge at site and necessary cutting and manufacturing shall only be done at site. No factory made material shall be allowed.
S & F factory made WPC single extruded 100 % lead free ROHS certified board of 18 mm thick pre laminated for sides & partition of cup board, shutter for cup board/ kitchen cupboard. The laminated board should be pre laminated one side with different design and other side plain white of density not less than 600 kg/cum manufactured by an ISO 9001:2015 certified company. The 18 mm board should be 100 % lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed including dismantling & removal of existing un serviceable cup board shutters, shelves etc.
S&F ball catches with 8 mm dia steel ball magnet catches for cupboard shutter including striking plate as approved etc complete all as specified and as directed
S&F in repairs stainless steel decorative curtain rod of 25 mm bore including brackets 02 nos, finale 02 nos etc complete all as specified and as directed
S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.
S&F for 100 mm bore Cast iron spun pipe (for Rain water) in any length without ears with cement joint fixed to walls including dismantling of existing PVC/AC pipe complete all as specified and as directed
S&F 100 mm bore cast iron Bends of (any radius), spun pipe diminishing pieces or tapers (larger bore measured) including dismantling of existing PVC/AC bends complete all as specified and as directed
M & L for ATT post construction Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified.
M & L for ATT post construction Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified
S&F MS tubes, joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge
S & F pre-painted galvalume aluminium zinc coating GI based Tile profile steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge
S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge
M & L Minimum 24 mm X 160mm X 2900 mm size WPC Lining fluted panels (fixed to wall/ceiling) inclusive of solvent and ceiling system with Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanger bars to support the ceiling to roof complete all as per manufacturer’s instruction including dismantling existing ceiling/panelling complete all as specified and directed by Engineer-in-Charge
M&L for Preparation of old steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with one coat of synthetic enamel paint complete all as specified and as directed. Note :- Item is catered for painting of old roof purlins, truss members, windows guard bars etc.
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed
M&L for Preparation of old wood/wood based surfaces of any description not otherwise described, over 10 cm in width or girth and painting with one coat of synthetic enamel paint complete all as specified and as directed
M&L three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed
M&L one coats of white wash on ceiling on Old plastered treated surfaces including preparation of surfaces complete all as specified and as directed
Complete removing of existing treatment from wall/ceiling upto plastered surface by scrapping with scrapper, washing, rubbing down and stopping including cleaning of mortar drops, smoke soots, moulds, moss, efflorescent salt, trading oil, greasy spots etc and finally preparation of plastered surface by rubbing & smooth with sand paper complete all as specified and directed. Note :- The rate of scafolding is included is included for this item.
M&L for preparation of new wall surfaces/surfaces after complete removal and applying wall care putty 1.5 to 2.0mm thick in two coat (Asian/Berger/JK) to make the surface smooth as specified and directed by Engineer – in- charge. (Note :- The rate of scaffolding is included for this item. After completion of preparation of surface as per item above the stage has to be passed by Engr- in- charge complete all as specified and directed.
M&L for preparation of new plastered/unplastered /puttied wall surfaces of any description and applying two coats of acrylic distemper over a coat of alkali resistant primer etc over prepared wall surfaces complete all as specified and directed by Engr-in-Charge . (Note : The rate of scafolding is included for this item also. Applying coat of putty after completion of preparation of surface as per item above stage has to be passed by Engr-in-charge complete all as specified and directed)
M&L for preparation of new plastered/unplastered/puttied wall surfaces and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge . (Note : The rate of scafolding is included for this item also. Applying coat after completion of preparation of surface as item above, stage has to be passed by Engr-in-charge complete all as specified and directed)
M&L for preparation of surfaces of any description wood, steel, iron, concrete, brick, stone etc exc 10 cm in width or girth and two coats of black bituminous paint complete all as specified and directed .
Complete removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers to achieve smooth surface, any number of coats, any width or girth and any description complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like Chajjas, Claddings, soffits etc including demolition of existing defective reinforced concrete , complete all as specified and directed. Note:- Reinforcement shall be measured & paid under respective items.
M&L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.
M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
S & F 8 mm thick waterproof, termite proof and fire resistant HPL Board planks of suitable size for external facia and façade complete all as specified and directed
S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed.
S & F 1.60 mm thick plain black skeet in wall cladding, steel gates , framed work, ornamental work etc and similar work cut to size, holes punched including round headed screws clout nails or riveted and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitered angles, etc as required complete all as specified and directed
S & F 125 mm size extruded brass hinge conforming to IS 205- 1992 with mild steel hinge pin bright polished and fixed complete all as specified
S & F 75 mm size extruded brass hinge conforming to IS 205- 1992 with mild steel hinge pin bright polished and fixed complete all as specified
S&F 150 mm long fancy type Extruded brass handle, polished conforming to IS 208- 1996 complete all as specified and as directed
S&F 100 mm long fancy type Extruded brass handle, polished conforming to IS 208- 1996 complete all as specified and as directed
S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed
S&F 125 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed
S & F 300 mm long and 16 mm dia (min) Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts conforming to IS 2681-1993 and fixed complete all as specified.
S & F 200 mm long and 12 mm dia (min) Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts conforming to IS 2681-1993 and fixed compete all as specified.
S & F 300mm,Brass ordinary rat tail rod pattern springs including roller and roller plate conforming to IS 452-1973 complete all as specified & directed.
S&F 150mm over all length of cover plate floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F 125mm size gate & shutter hook and eyes, brass wire, Type I fixed to window shutter complete all as specified and as directed.
S & F 1st class hardwood (Teak) manufactured in situ Moulding as in cornices, picture rails and the like n exc 6 Sqcm in sec as directed by Engineer in Charge . Note :- The contractor shall bring the trunk of appropriate size as per direction of Engineer in charge at site and necessary cutting and manufacturing shall only be done at site. No factory made material shall be allowed.
M & L for melamine clear polishing high gloss/matt finish in required color/wooden shade texture on wooden surfaces of any description, width or girth with following sequence:- (a) Cleaning and preparing the surface with rubbing of sand paper 80/120 No & 160/180 respectively, (b) Applying two coat of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat to dry for 8 to 12 hrs. (c ) On drying of Sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excessive sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small & big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs. (d) On this surface 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete all as directed by Engineer-in- charge. (Final coat to be done in 1 or 2 layers without gap of time)
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.
S&F 4 mm thick Figured glass, pin head type and glazing with oil putt/silicon gel in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as specified and as directed
M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.
S&F for mild steel work as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work including welding,conforming to FE-290 grade E-165 complete all as specified and directed.
PCC 1: 3 : 6 type C1 using 20 mm graded aggregates in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc complete all as specified and directed.
75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.
Supply and spreading 75mm thick layer of 10 to 20mm graded Shingle/gravel on walking track of cadets near building.
Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in any type of soil complete all as specified and directed by Engineer-In- Charge.
Returning/filling trenches, including spreading levelling, watering, well ramming in layers n.exc 25 cm
Removing excavation material surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.
M &L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L brick work using sub class "B" bricks, strainght or curved on plan exc 6.00 m mean radius built in Cm 1:4 complete all as specified.
M&L PCC 1:3:6 type C1 ( using 20 mm thick graded stone aggregate) as in surface drain and channel complete all as specified and directed
BLANK
M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick masonry wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, throating and necessary form work complete all as specified and directed.
M&L for mild steel TMT bars 6 mm to 8 mm dia and over cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified complete all as specified and directed by Engineer-In- Charge
M&L for pre cast RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab and drain covers etc complete all as specified and directed by Engineer-In- Charge.
Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge Note: old point wiring obtained from Sl item no 95-99 of Sch A.
M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in new concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories for GI metal flush box 1 Module to 12 Module,coloured metal plate and frame as required at site for mounting of modular switches, sockets, fan regulator etc , including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule) Note:- (1) Rate of Modular GI flush box, frame,plate and blanking plate deemed to be included in the quoted rate. (2) Concealed conduit wiring on wall & floor and surface conduit wiring on ceiling, roof, column & beam etc
(a) One light point /bell buzzer point controlled by one,one way switch.
(b) One ceiling fan/Exhaust fan point controlled by one,one way switch through Regulator.
(c) One three pin 5 Amp socket on same board.
(d) One three pin 5 Amp socket on independent board.
All as per item No 94 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.
M&L New point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in new concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories for GI metal flush box 1 Module to 12 Module,coloured metal plate and frame as required at site for mounting of modular switches, sockets, fan regulator etc , including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule) Note:- (1) Rate of Modular GI flush box, frame,plate and Blanking plate deemed to be included in the quoted rate. (2) Concealed conduit wiring on wall & floor and surface conduit on ceiling, roof, column & beam etc
(a) One light point /bell buzzer point controlled by one,one way switch.
(b) One three pin 6 Amp Modular socket on same board with other switches.
(c) One three pin 6 Amp Modular socket on independent board
All as per item No 4(c) above but one 3 pin socket outlet 15/16 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.
S&F Modular switch 1 way 6A,1 Module SP 230 V AC complete all as specified & directed.
S&F Modular switch 1 way 16A,1 Module SP 230 V AC complete all as specified & directed.
S&F Modular Socket,6A-2/3 pin combined,2 Module 230 V AC complete all as specified & directed.
S&F Modular socket outlet two in one three pin 6 Amp and 16A, 230 V AC - 2/3 pin combined 2 module complete all as specified.
S&F Electronic Fan regulator Modular type 2M,50W, 230 V, AC Suitable for BLDG ceiling fan complete all as specified and directed.
S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 230 V AC.
M&L in replacement sub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings with chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old sub main wiring .
Supply & fixing and Testing TP & N Vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 200 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCCB 63 Amps,ICs=100%ICu, 16KA four pole as in comer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site. (Note :- MCB/ MCCB shall be measured and paid separately)
S&F in replacement sheet metal enclosures 240 volt with 200 amps rated copper bus bar for double door 8 way IP-43DB's lk-09suitable for one MCB SPN as incoming and 6 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge ,including taking down old unserviceable DBs . (MCBs shall be measured and paid separately).
S&F MCB double pole 240 Volt 10 KA 40-63 Amp 'B' series conforming to ISI marked complete all as specified & directed .
S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to ISI marked all as specified and directed .
S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.
Supply & fix in replacement LED light fitting 1x20 W,220V AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply & fix new LED light fitting 1x20 W,220V AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED light fitting 1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.
S&F ceiling fans complete with blades ,down rods ,without electronic regulator and accessories ,230 V ,1200mm sweep.Min air delivery 210 CFM with service value 6.00 BEE Five Star Rated with Brushless Direct Current(BLDC) Motor.
Supply and Fixing Integral LED Street Light Luminaire comprising of high pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point all as specified and directed
Supply and fixing LED luminaire 600mm x 600mm ,35/36 watt ,220V AC recessed type with high efficiancy PMMA diffuser soft glare free light complete with drivers ,holders ,LED lamp suitable for roof ceiling ,including connecting up with driver three core flexible copper conductor case of suitable size complete.
Supplying, laying , jointing and testing in-replacement LT underground cable of size 25sqmm 4 core ,heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.
Supply & fix Motion sensor based LED light fitting 1x20 W,220V AC decorative box type with driver ,flicker free high efficiency suitable for surface ,wall and conduit mounting i connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
M&L sub main wiring for UPS/invertor connection with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 4.0 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings with chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 4.0 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed .
M&L for Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.
M&L for Excavation in trenches n.exc. 1.5 mtr wide and exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.
BLANK
BLANK
M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.
M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.
M&L for PCC (1:4:8) type D2, 40mm grade stone aggregate as in pole foundation
M&L for PCC (1:3:6) type C1 using 20mm grade stone aggregate as in pole coping
Supply and errect steel tubular pole swaged ISI Marked 12 Mtr long type 410 SP-64 complete with MS base plate 450 x 450 x 6mm pole cap finial taper plug, nuts, washers etc and including painting two coats of aluminium paint over one coat of red oxide primer, for mounting of two no's flood light including two no's bracket,nut and bolt,3 Nos band straps with yellow and black colour (300mm wide 2 Nos each) synthetic enameled paint including one coat on steel surface embeded in concrete all as specified and directed Note: (1) All excavation & earth work as involved shall be measured & paid seprately. (2) PCC foundation and Coping as involved shall be measured and paid seprately under respective items.
S&F of LED flood light fitting 200/210 watt 230 V AC outdoor type in aluminium PDC housing with LED lamp , toghened glass cover with IP 66 protection with 4/5 KV inbuilt surge protection and cable connection from looping box to light fitting at any height and testing complete all as specified and directed.
Supplying, laying , jointing and testing LT underground cable of size 10 sqmm 2 core ,heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items of this schedule.
M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed.
Supply installation , commissioning and testing Sub-main LT Panel outdoor type double door made out of CRCA sheet 3.15mm thick dust and vermin proof factory made cubical type duly painted alongwith insulators, vertically controlled complete of suitable size comprising of the following:- INCOMING:- (a) MCCB 4 pole 415 V 40 Amps, 50 Hz 16 KA + Spreader Link -01 No . (b) Contactor,3 pole,32 Amps - 01 No. (c) Anolog Timer Switch - 01 No. (d) A/M Switch - 01 No. e) ON Indicator - 01 No. (f) MCB SP 6A - 01 No. OUTGOINGS:- (a) MCB DP 10 Amps - 04 No's. (b) Timer Switch 32 Amps - 01 No. (j) Bus bar chamber with and including aluminium bus bar (4 Nos) suitable for 100 Amps duly insulated , wired & duly mounted on porcelain insulators.- 01 Set
MOHAN LAL GUPTA (BID ID -3118274)
M/S Manmohan Singh Anand (BID ID -3120263)
IMPERIAL ENGINEERS (BID ID -3118260)
Ms dev associates (BID ID -3118314)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .