Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-AOC | ₹13.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹15.9 LRejected-AOC | ₹15.9 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | LAIJU.P.VARGHESE L1 | Ashok Kumar.K.R L2 |
|---|---|---|---|---|---|
| 1.00CF pump set with Discharge - 23lps,Total Head -70mtr to Pulinthanan tank | |||||
| 1.00 | OD163815/2025-2026:Supply of pump:-
Supply ,erection,testing and commissioning of KWA pre- qualified reputed make slow speed, split case Centrifugal pump with bronze/SS impeller, SS shaft and CI pump casing with suitable type base plate with coupling, coupling guard foundation bolt & nuts etc.complete suitable for coupling the pump and motor above the base plate etc. complete.
The duty condition as follows.
Discharge -23 LPS
Total head 70 mtrs Suction head - 4 mtrs
Length of suction pipe- 4 mtr | 1 | no | 10,70,000 ₹10.7 L | 12,23,384 ₹12.2 L |
| 1.00 | OD163819/2025-2026:Supply of KWA prequalified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working 3 phase 50 Hz. AC supply, working voltage 415 V (suitable for the pumpset). The motor shall confirm to IE2/IE3 as per IS12615- 2018 digital motor protection relay shall be included in starter as per present CEA regulations 2010. Flexible coupling shall be used for coupling of pump and motors" 4 poles | 1 | no | 91,990 ₹91,990 | 1,04,408 ₹1.0 L |
| 1.00 | OD163817/2025-2026:Supply suitable rating (Fully automatic ATS starter with air break contact for less than 50 HP and for above 50 HP FCMA starters to be used) starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per IE rules and code of practice etc. Complete" | 1 | no | 62,773 ₹62,773 | 71,247 ₹71,247 |
| 1.00 | OD163818/2025-2026:Panel board (suitable for operating two pump sets but one pumps set at a time):-
Supply, erection, testing and commissioning of cubical type floor mounted MS fabricated dust and vermin proof common control panel board consisting of 1 no. suitable capacity MCCB as incomer and 2 Nos. of suitable capacity MCCB as outgoing, (the 2 MCCBs are interlocking with each other) providing suitable size Aluminium bus bar, inter connect the above MCCBs and fitted with 3 Nos. of indicator lamps, 1 no Volt meter with selector switch, 1 no Ammeter with selector switch etc. complete and provided with a common earth bus for the entire panel and inter connect with the MCCBs as per IE rules and code of practice. The panel shall be fitted on a common base frame on suitable foundation & quot; | 1 | no | 39,491 ₹39,491 | 44,822 ₹44,822 |
| 1.00 | OD163824/2025-2026:Capacitor:-
Supply, erection, testing and commissioning heavy duty APP capacitor for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834. " | 1 | no | 16,841 ₹16,841 | 19,114 ₹19,114 |
| 1.01 | OD163820/2025-2026:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required .
2)Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)-10metre | 1 | no | 17,113 ₹17,113 | 19,120 ₹19,120 |
| 1.01 | OD163816/2025-2026:Cabling work:-
Supply, laying, testing and commissioning of suitable size 3 core XLPE Alluminium cables for the above pump set from bus bar to panel board , panel board to starter and from starter to motor considering energy conservation." | 6 | metre | 700 ₹4,200 | 4,500 ₹27,000 |
| 1.01 | OD163821/2025-2026:Valves:-
Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. In case of positive suction pump sets sluice valve should be in suction as well as delivery sides for easy repair works. " | 1 | set | 22,320 ₹22,320 | 25,300 ₹25,300 |
| 1.01 | OD163822/2025-2026:Suction and delivery pipe connections :-
Supply and fitting of suitable size best quality CI/DI pipe . Suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut and bolts, IR sheet etc. complete with bypass arrangements, supply and fitting pressure guage of suitable rating with main cock and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main. If the dia. of suction pipe is above 200 mm CI/DI pipes & specials shall be provided " | 1 | no | 22,649 ₹22,649 | 25,700 ₹25,700 |
Updated dates
Tender Value
₹13.8 L
EMD Value
₹34,449
Closing Date
2 Feb 2026, 3:00 pmClosed
ExecutiveEngineer
ExecutiveEngineer PH Division Muvattupuzha
State Plan 202425 Electrical work Pothanicad Panchayath Supply Erection and Commissioning of one CF pump set having a discharge of 23 Lps against a total head of 70 mtr and one CF pump set having a discharge of 7.5 Lsp against a total head of 6
2026_KWA_829490_1
40/2025-26/EE/PHDN/MVPA
Open Tender
Civil Works - Water Works
365 days
Pothanikkad
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
₹34,449
1 Apr 2026
22 Jan 2026
3 Feb 2026
22 Jan 2026
2 Feb 2026
22 Jan 2026
CF pump set with Discharge - 23lps,Total Head -70mtr to Pulinthanan tank
OD163815/2025-2026:Supply of pump:- Supply ,erection,testing and commissioning of KWA pre- qualified reputed make slow speed, split case Centrifugal pump with bronze/SS impeller, SS shaft and CI pump casing with suitable type base plate with coupling, coupling guard foundation bolt & nuts etc.complete suitable for coupling the pump and motor above the base plate etc. complete. The duty condition as follows. Discharge -23 LPS Total head 70 mtrs Suction head - 4 mtrs Length of suction pipe- 4 mtr
OD163819/2025-2026:Supply of KWA prequalified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working 3 phase 50 Hz. AC supply, working voltage 415 V (suitable for the pumpset). The motor shall confirm to IE2/IE3 as per IS12615- 2018 digital motor protection relay shall be included in starter as per present CEA regulations 2010. Flexible coupling shall be used for coupling of pump and motors" 4 poles
OD163817/2025-2026:Supply suitable rating (Fully automatic ATS starter with air break contact for less than 50 HP and for above 50 HP FCMA starters to be used) starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per IE rules and code of practice etc. Complete"
OD163824/2025-2026:Capacitor:- Supply, erection, testing and commissioning heavy duty APP capacitor for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834. "
OD163820/2025-2026:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required . 2)Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)-10metre
OD163816/2025-2026:Cabling work:- Supply, laying, testing and commissioning of suitable size 3 core XLPE Alluminium cables for the above pump set from bus bar to panel board , panel board to starter and from starter to motor considering energy conservation."
OD163821/2025-2026:Valves:- Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. In case of positive suction pump sets sluice valve should be in suction as well as delivery sides for easy repair works. "
OD163822/2025-2026:Suction and delivery pipe connections :- Supply and fitting of suitable size best quality CI/DI pipe . Suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut and bolts, IR sheet etc. complete with bypass arrangements, supply and fitting pressure guage of suitable rating with main cock and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main. If the dia. of suction pipe is above 200 mm CI/DI pipes & specials shall be provided "
OD163823/2025-2026:Erection, testing and commissioning :- Erection of pump ,motor, starter on suitable concrete foundation with base, plate, coupling the motor and pump using flexible coupling, fitting coupling guard, trial run and commissioning "
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1393018.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
KWAGeneralConditionsforeTenderingV5.pdf
PDF • 0.69 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_1393018.xls
BOQ • 0.31 MB
NIT.pdf
Tender Documents • 0.92 MB
Circularsorders.pdf
Other Document • 13.07 MB
Download all tender documents and submit your bid